]>
Commit | Line | Data |
---|---|---|
1 | # | |
2 | # Hardware monitoring chip drivers configuration | |
3 | # | |
4 | ||
5 | menuconfig HWMON | |
6 | tristate "Hardware Monitoring support" | |
7 | depends on HAS_IOMEM | |
8 | default y | |
9 | help | |
10 | Hardware monitoring devices let you monitor the hardware health | |
11 | of a system. Most modern motherboards include such a device. It | |
12 | can include temperature sensors, voltage sensors, fan speed | |
13 | sensors and various additional features such as the ability to | |
14 | control the speed of the fans. If you want this support you | |
15 | should say Y here and also to the specific driver(s) for your | |
16 | sensors chip(s) below. | |
17 | ||
18 | To find out which specific driver(s) you need, use the | |
19 | sensors-detect script from the lm_sensors package. Read | |
20 | <file:Documentation/hwmon/userspace-tools> for details. | |
21 | ||
22 | This support can also be built as a module. If so, the module | |
23 | will be called hwmon. | |
24 | ||
25 | if HWMON | |
26 | ||
27 | config HWMON_VID | |
28 | tristate | |
29 | default n | |
30 | ||
31 | config SENSORS_ABITUGURU | |
32 | tristate "Abit uGuru (rev 1 & 2)" | |
33 | depends on X86 && EXPERIMENTAL | |
34 | help | |
35 | If you say yes here you get support for the sensor part of the first | |
36 | and second revision of the Abit uGuru chip. The voltage and frequency | |
37 | control parts of the Abit uGuru are not supported. The Abit uGuru | |
38 | chip can be found on Abit uGuru featuring motherboards (most modern | |
39 | Abit motherboards from before end 2005). For more info and a list | |
40 | of which motherboards have which revision see | |
41 | Documentation/hwmon/abituguru | |
42 | ||
43 | This driver can also be built as a module. If so, the module | |
44 | will be called abituguru. | |
45 | ||
46 | config SENSORS_ABITUGURU3 | |
47 | tristate "Abit uGuru (rev 3)" | |
48 | depends on X86 && EXPERIMENTAL | |
49 | help | |
50 | If you say yes here you get support for the sensor part of the | |
51 | third revision of the Abit uGuru chip. Only reading the sensors | |
52 | and their settings is supported. The third revision of the Abit | |
53 | uGuru chip can be found on recent Abit motherboards (since end | |
54 | 2005). For more info and a list of which motherboards have which | |
55 | revision see Documentation/hwmon/abituguru3 | |
56 | ||
57 | This driver can also be built as a module. If so, the module | |
58 | will be called abituguru3. | |
59 | ||
60 | config SENSORS_AD7414 | |
61 | tristate "Analog Devices AD7414" | |
62 | depends on I2C && EXPERIMENTAL | |
63 | help | |
64 | If you say yes here you get support for the Analog Devices | |
65 | AD7414 temperature monitoring chip. | |
66 | ||
67 | This driver can also be built as a module. If so, the module | |
68 | will be called ad7414. | |
69 | ||
70 | config SENSORS_AD7418 | |
71 | tristate "Analog Devices AD7416, AD7417 and AD7418" | |
72 | depends on I2C && EXPERIMENTAL | |
73 | help | |
74 | If you say yes here you get support for the Analog Devices | |
75 | AD7416, AD7417 and AD7418 temperature monitoring chips. | |
76 | ||
77 | This driver can also be built as a module. If so, the module | |
78 | will be called ad7418. | |
79 | ||
80 | config SENSORS_ADCXX | |
81 | tristate "National Semiconductor ADCxxxSxxx" | |
82 | depends on SPI_MASTER && EXPERIMENTAL | |
83 | help | |
84 | If you say yes here you get support for the National Semiconductor | |
85 | ADC<bb><c>S<sss> chip family, where | |
86 | * bb is the resolution in number of bits (8, 10, 12) | |
87 | * c is the number of channels (1, 2, 4, 8) | |
88 | * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 | |
89 | kSPS and 101 for 1 MSPS) | |
90 | ||
91 | Examples : ADC081S101, ADC124S501, ... | |
92 | ||
93 | This driver can also be built as a module. If so, the module | |
94 | will be called adcxx. | |
95 | ||
96 | config SENSORS_ADM1021 | |
97 | tristate "Analog Devices ADM1021 and compatibles" | |
98 | depends on I2C | |
99 | help | |
100 | If you say yes here you get support for Analog Devices ADM1021 | |
101 | and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, | |
102 | Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, | |
103 | and the XEON processor built-in sensor. | |
104 | ||
105 | This driver can also be built as a module. If so, the module | |
106 | will be called adm1021. | |
107 | ||
108 | config SENSORS_ADM1025 | |
109 | tristate "Analog Devices ADM1025 and compatibles" | |
110 | depends on I2C | |
111 | select HWMON_VID | |
112 | help | |
113 | If you say yes here you get support for Analog Devices ADM1025 | |
114 | and Philips NE1619 sensor chips. | |
115 | ||
116 | This driver can also be built as a module. If so, the module | |
117 | will be called adm1025. | |
118 | ||
119 | config SENSORS_ADM1026 | |
120 | tristate "Analog Devices ADM1026 and compatibles" | |
121 | depends on I2C && EXPERIMENTAL | |
122 | select HWMON_VID | |
123 | help | |
124 | If you say yes here you get support for Analog Devices ADM1026 | |
125 | sensor chip. | |
126 | ||
127 | This driver can also be built as a module. If so, the module | |
128 | will be called adm1026. | |
129 | ||
130 | config SENSORS_ADM1029 | |
131 | tristate "Analog Devices ADM1029" | |
132 | depends on I2C && EXPERIMENTAL | |
133 | help | |
134 | If you say yes here you get support for Analog Devices ADM1029 | |
135 | sensor chip. | |
136 | Very rare chip, please let us know you use it. | |
137 | ||
138 | This driver can also be built as a module. If so, the module | |
139 | will be called adm1029. | |
140 | ||
141 | config SENSORS_ADM1031 | |
142 | tristate "Analog Devices ADM1031 and compatibles" | |
143 | depends on I2C && EXPERIMENTAL | |
144 | help | |
145 | If you say yes here you get support for Analog Devices ADM1031 | |
146 | and ADM1030 sensor chips. | |
147 | ||
148 | This driver can also be built as a module. If so, the module | |
149 | will be called adm1031. | |
150 | ||
151 | config SENSORS_ADM9240 | |
152 | tristate "Analog Devices ADM9240 and compatibles" | |
153 | depends on I2C | |
154 | select HWMON_VID | |
155 | help | |
156 | If you say yes here you get support for Analog Devices ADM9240, | |
157 | Dallas DS1780, National Semiconductor LM81 sensor chips. | |
158 | ||
159 | This driver can also be built as a module. If so, the module | |
160 | will be called adm9240. | |
161 | ||
162 | config SENSORS_ADT7462 | |
163 | tristate "Analog Devices ADT7462" | |
164 | depends on I2C && EXPERIMENTAL | |
165 | help | |
166 | If you say yes here you get support for the Analog Devices | |
167 | ADT7462 temperature monitoring chips. | |
168 | ||
169 | This driver can also be built as a module. If so, the module | |
170 | will be called adt7462. | |
171 | ||
172 | config SENSORS_ADT7470 | |
173 | tristate "Analog Devices ADT7470" | |
174 | depends on I2C && EXPERIMENTAL | |
175 | help | |
176 | If you say yes here you get support for the Analog Devices | |
177 | ADT7470 temperature monitoring chips. | |
178 | ||
179 | This driver can also be built as a module. If so, the module | |
180 | will be called adt7470. | |
181 | ||
182 | config SENSORS_ADT7473 | |
183 | tristate "Analog Devices ADT7473" | |
184 | depends on I2C && EXPERIMENTAL | |
185 | help | |
186 | If you say yes here you get support for the Analog Devices | |
187 | ADT7473 temperature monitoring chips. | |
188 | ||
189 | This driver can also be built as a module. If so, the module | |
190 | will be called adt7473. | |
191 | ||
192 | config SENSORS_ADT7475 | |
193 | tristate "Analog Devices ADT7475" | |
194 | depends on I2C && EXPERIMENTAL | |
195 | help | |
196 | If you say yes here you get support for the Analog Devices | |
197 | ADT7475 hardware monitoring chips. | |
198 | ||
199 | This driver can also be build as a module. If so, the module | |
200 | will be called adt7475. | |
201 | ||
202 | config SENSORS_K8TEMP | |
203 | tristate "AMD Athlon64/FX or Opteron temperature sensor" | |
204 | depends on X86 && PCI && EXPERIMENTAL | |
205 | help | |
206 | If you say yes here you get support for the temperature | |
207 | sensor(s) inside your CPU. Supported is whole AMD K8 | |
208 | microarchitecture. Please note that you will need at least | |
209 | lm-sensors 2.10.1 for proper userspace support. | |
210 | ||
211 | This driver can also be built as a module. If so, the module | |
212 | will be called k8temp. | |
213 | ||
214 | config SENSORS_AMS | |
215 | tristate "Apple Motion Sensor driver" | |
216 | depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL | |
217 | select INPUT_POLLDEV | |
218 | help | |
219 | Support for the motion sensor included in PowerBooks. Includes | |
220 | implementations for PMU and I2C. | |
221 | ||
222 | This driver can also be built as a module. If so, the module | |
223 | will be called ams. | |
224 | ||
225 | config SENSORS_AMS_PMU | |
226 | bool "PMU variant" | |
227 | depends on SENSORS_AMS && ADB_PMU | |
228 | default y | |
229 | help | |
230 | PMU variant of motion sensor, found in late 2005 PowerBooks. | |
231 | ||
232 | config SENSORS_AMS_I2C | |
233 | bool "I2C variant" | |
234 | depends on SENSORS_AMS && I2C | |
235 | default y | |
236 | help | |
237 | I2C variant of motion sensor, found in early 2005 PowerBooks and | |
238 | iBooks. | |
239 | ||
240 | config SENSORS_ASB100 | |
241 | tristate "Asus ASB100 Bach" | |
242 | depends on X86 && I2C && EXPERIMENTAL | |
243 | select HWMON_VID | |
244 | help | |
245 | If you say yes here you get support for the ASB100 Bach sensor | |
246 | chip found on some Asus mainboards. | |
247 | ||
248 | This driver can also be built as a module. If so, the module | |
249 | will be called asb100. | |
250 | ||
251 | config SENSORS_ATXP1 | |
252 | tristate "Attansic ATXP1 VID controller" | |
253 | depends on I2C && EXPERIMENTAL | |
254 | select HWMON_VID | |
255 | help | |
256 | If you say yes here you get support for the Attansic ATXP1 VID | |
257 | controller. | |
258 | ||
259 | If your board have such a chip, you are able to control your CPU | |
260 | core and other voltages. | |
261 | ||
262 | This driver can also be built as a module. If so, the module | |
263 | will be called atxp1. | |
264 | ||
265 | config SENSORS_DS1621 | |
266 | tristate "Dallas Semiconductor DS1621 and DS1625" | |
267 | depends on I2C | |
268 | help | |
269 | If you say yes here you get support for Dallas Semiconductor | |
270 | DS1621 and DS1625 sensor chips. | |
271 | ||
272 | This driver can also be built as a module. If so, the module | |
273 | will be called ds1621. | |
274 | ||
275 | config SENSORS_I5K_AMB | |
276 | tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" | |
277 | depends on PCI && EXPERIMENTAL | |
278 | help | |
279 | If you say yes here you get support for FB-DIMM AMB temperature | |
280 | monitoring chips on systems with the Intel 5000 series chipset. | |
281 | ||
282 | This driver can also be built as a module. If so, the module | |
283 | will be called i5k_amb. | |
284 | ||
285 | config SENSORS_F71805F | |
286 | tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" | |
287 | depends on EXPERIMENTAL | |
288 | help | |
289 | If you say yes here you get support for hardware monitoring | |
290 | features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG | |
291 | Super-I/O chips. | |
292 | ||
293 | This driver can also be built as a module. If so, the module | |
294 | will be called f71805f. | |
295 | ||
296 | config SENSORS_F71882FG | |
297 | tristate "Fintek F71862FG, F71882FG and F8000" | |
298 | depends on EXPERIMENTAL | |
299 | help | |
300 | If you say yes here you get support for hardware monitoring | |
301 | features of the Fintek F71882FG/F71883FG, F71862FG/71863FG | |
302 | and F8000 Super-I/O chips. | |
303 | ||
304 | This driver can also be built as a module. If so, the module | |
305 | will be called f71882fg. | |
306 | ||
307 | config SENSORS_F75375S | |
308 | tristate "Fintek F75375S/SP and F75373"; | |
309 | depends on I2C && EXPERIMENTAL | |
310 | help | |
311 | If you say yes here you get support for hardware monitoring | |
312 | features of the Fintek F75375S/SP and F75373 | |
313 | ||
314 | This driver can also be built as a module. If so, the module | |
315 | will be called f75375s. | |
316 | ||
317 | config SENSORS_FSCHER | |
318 | tristate "FSC Hermes (DEPRECATED)" | |
319 | depends on X86 && I2C | |
320 | help | |
321 | This driver is DEPRECATED please use the new merged fschmd | |
322 | ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver | |
323 | instead. | |
324 | ||
325 | If you say yes here you get support for Fujitsu Siemens | |
326 | Computers Hermes sensor chips. | |
327 | ||
328 | This driver can also be built as a module. If so, the module | |
329 | will be called fscher. | |
330 | ||
331 | config SENSORS_FSCPOS | |
332 | tristate "FSC Poseidon (DEPRECATED)" | |
333 | depends on X86 && I2C | |
334 | help | |
335 | This driver is DEPRECATED please use the new merged fschmd | |
336 | ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver | |
337 | instead. | |
338 | ||
339 | If you say yes here you get support for Fujitsu Siemens | |
340 | Computers Poseidon sensor chips. | |
341 | ||
342 | This driver can also be built as a module. If so, the module | |
343 | will be called fscpos. | |
344 | ||
345 | config SENSORS_FSCHMD | |
346 | tristate "Fujitsu Siemens Computers sensor chips" | |
347 | depends on X86 && I2C | |
348 | help | |
349 | If you say yes here you get support for the following Fujitsu | |
350 | Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, | |
351 | Heimdall, Heracles, Hades and Syleus including support for the | |
352 | integrated watchdog. | |
353 | ||
354 | This is a merged driver for FSC sensor chips replacing the fscpos, | |
355 | fscscy and fscher drivers and adding support for several other FSC | |
356 | sensor chips. | |
357 | ||
358 | This driver can also be built as a module. If so, the module | |
359 | will be called fschmd. | |
360 | ||
361 | config SENSORS_GL518SM | |
362 | tristate "Genesys Logic GL518SM" | |
363 | depends on I2C | |
364 | help | |
365 | If you say yes here you get support for Genesys Logic GL518SM | |
366 | sensor chips. | |
367 | ||
368 | This driver can also be built as a module. If so, the module | |
369 | will be called gl518sm. | |
370 | ||
371 | config SENSORS_GL520SM | |
372 | tristate "Genesys Logic GL520SM" | |
373 | depends on I2C | |
374 | select HWMON_VID | |
375 | help | |
376 | If you say yes here you get support for Genesys Logic GL520SM | |
377 | sensor chips. | |
378 | ||
379 | This driver can also be built as a module. If so, the module | |
380 | will be called gl520sm. | |
381 | ||
382 | config SENSORS_CORETEMP | |
383 | tristate "Intel Core (2) Duo/Solo temperature sensor" | |
384 | depends on X86 && EXPERIMENTAL | |
385 | help | |
386 | If you say yes here you get support for the temperature | |
387 | sensor inside your CPU. Supported all are all known variants | |
388 | of Intel Core family. | |
389 | ||
390 | config SENSORS_IBMAEM | |
391 | tristate "IBM Active Energy Manager temperature/power sensors and control" | |
392 | select IPMI_SI | |
393 | depends on IPMI_HANDLER | |
394 | help | |
395 | If you say yes here you get support for the temperature and | |
396 | power sensors and capping hardware in various IBM System X | |
397 | servers that support Active Energy Manager. This includes | |
398 | the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, | |
399 | and certain HS2x/LS2x/QS2x blades. | |
400 | ||
401 | This driver can also be built as a module. If so, the module | |
402 | will be called ibmaem. | |
403 | ||
404 | config SENSORS_IBMPEX | |
405 | tristate "IBM PowerExecutive temperature/power sensors" | |
406 | select IPMI_SI | |
407 | depends on IPMI_HANDLER | |
408 | help | |
409 | If you say yes here you get support for the temperature and | |
410 | power sensors in various IBM System X servers that support | |
411 | PowerExecutive. So far this includes the x3350, x3550, x3650, | |
412 | x3655, and x3755; the x3800, x3850, and x3950 models that have | |
413 | PCI Express; and some of the HS2x, LS2x, and QS2x blades. | |
414 | ||
415 | This driver can also be built as a module. If so, the module | |
416 | will be called ibmpex. | |
417 | ||
418 | config SENSORS_IT87 | |
419 | tristate "ITE IT87xx and compatibles" | |
420 | select HWMON_VID | |
421 | help | |
422 | If you say yes here you get support for ITE IT8705F, IT8712F, | |
423 | IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the | |
424 | SiS960 clone. | |
425 | ||
426 | This driver can also be built as a module. If so, the module | |
427 | will be called it87. | |
428 | ||
429 | config SENSORS_LM63 | |
430 | tristate "National Semiconductor LM63" | |
431 | depends on I2C | |
432 | help | |
433 | If you say yes here you get support for the National Semiconductor | |
434 | LM63 remote diode digital temperature sensor with integrated fan | |
435 | control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro) | |
436 | motherboard, among others. | |
437 | ||
438 | This driver can also be built as a module. If so, the module | |
439 | will be called lm63. | |
440 | ||
441 | config SENSORS_LM70 | |
442 | tristate "National Semiconductor LM70 / Texas Instruments TMP121" | |
443 | depends on SPI_MASTER && EXPERIMENTAL | |
444 | help | |
445 | If you say yes here you get support for the National Semiconductor | |
446 | LM70 and Texas Instruments TMP121/TMP123 digital temperature | |
447 | sensor chips. | |
448 | ||
449 | This driver can also be built as a module. If so, the module | |
450 | will be called lm70. | |
451 | ||
452 | config SENSORS_LM75 | |
453 | tristate "National Semiconductor LM75 and compatibles" | |
454 | depends on I2C | |
455 | help | |
456 | If you say yes here you get support for one common type of | |
457 | temperature sensor chip, with models including: | |
458 | ||
459 | - Dallas Semiconductor DS75 and DS1775 | |
460 | - Maxim MAX6625 and MAX6626 | |
461 | - Microchip MCP980x | |
462 | - National Semiconductor LM75 | |
463 | - NXP's LM75A | |
464 | - ST Microelectronics STDS75 | |
465 | - TelCom (now Microchip) TCN75 | |
466 | - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275 | |
467 | ||
468 | This driver supports driver model based binding through board | |
469 | specific I2C device tables. | |
470 | ||
471 | It also supports the "legacy" style of driver binding. To use | |
472 | that with some chips which don't replicate LM75 quirks exactly, | |
473 | you may need the "force" module parameter. | |
474 | ||
475 | This driver can also be built as a module. If so, the module | |
476 | will be called lm75. | |
477 | ||
478 | config SENSORS_LM77 | |
479 | tristate "National Semiconductor LM77" | |
480 | depends on I2C | |
481 | help | |
482 | If you say yes here you get support for National Semiconductor LM77 | |
483 | sensor chips. | |
484 | ||
485 | This driver can also be built as a module. If so, the module | |
486 | will be called lm77. | |
487 | ||
488 | config SENSORS_LM78 | |
489 | tristate "National Semiconductor LM78 and compatibles" | |
490 | depends on I2C | |
491 | select HWMON_VID | |
492 | help | |
493 | If you say yes here you get support for National Semiconductor LM78, | |
494 | LM78-J and LM79. | |
495 | ||
496 | This driver can also be built as a module. If so, the module | |
497 | will be called lm78. | |
498 | ||
499 | config SENSORS_LM80 | |
500 | tristate "National Semiconductor LM80" | |
501 | depends on I2C && EXPERIMENTAL | |
502 | help | |
503 | If you say yes here you get support for National Semiconductor | |
504 | LM80 sensor chips. | |
505 | ||
506 | This driver can also be built as a module. If so, the module | |
507 | will be called lm80. | |
508 | ||
509 | config SENSORS_LM83 | |
510 | tristate "National Semiconductor LM83 and compatibles" | |
511 | depends on I2C | |
512 | help | |
513 | If you say yes here you get support for National Semiconductor | |
514 | LM82 and LM83 sensor chips. | |
515 | ||
516 | This driver can also be built as a module. If so, the module | |
517 | will be called lm83. | |
518 | ||
519 | config SENSORS_LM85 | |
520 | tristate "National Semiconductor LM85 and compatibles" | |
521 | depends on I2C && EXPERIMENTAL | |
522 | select HWMON_VID | |
523 | help | |
524 | If you say yes here you get support for National Semiconductor LM85 | |
525 | sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027. | |
526 | ||
527 | This driver can also be built as a module. If so, the module | |
528 | will be called lm85. | |
529 | ||
530 | config SENSORS_LM87 | |
531 | tristate "National Semiconductor LM87 and compatibles" | |
532 | depends on I2C | |
533 | select HWMON_VID | |
534 | help | |
535 | If you say yes here you get support for National Semiconductor LM87 | |
536 | and Analog Devices ADM1024 sensor chips. | |
537 | ||
538 | This driver can also be built as a module. If so, the module | |
539 | will be called lm87. | |
540 | ||
541 | config SENSORS_LM90 | |
542 | tristate "National Semiconductor LM90 and compatibles" | |
543 | depends on I2C | |
544 | help | |
545 | If you say yes here you get support for National Semiconductor LM90, | |
546 | LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim | |
547 | MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, | |
548 | MAX6680, MAX6681 and MAX6692 sensor chips. | |
549 | ||
550 | This driver can also be built as a module. If so, the module | |
551 | will be called lm90. | |
552 | ||
553 | config SENSORS_LM92 | |
554 | tristate "National Semiconductor LM92 and compatibles" | |
555 | depends on I2C | |
556 | help | |
557 | If you say yes here you get support for National Semiconductor LM92 | |
558 | and Maxim MAX6635 sensor chips. | |
559 | ||
560 | This driver can also be built as a module. If so, the module | |
561 | will be called lm92. | |
562 | ||
563 | config SENSORS_LM93 | |
564 | tristate "National Semiconductor LM93 and compatibles" | |
565 | depends on I2C | |
566 | select HWMON_VID | |
567 | help | |
568 | If you say yes here you get support for National Semiconductor LM93 | |
569 | sensor chips. | |
570 | ||
571 | This driver can also be built as a module. If so, the module | |
572 | will be called lm93. | |
573 | ||
574 | config SENSORS_LTC4215 | |
575 | tristate "Linear Technology LTC4215" | |
576 | depends on I2C && EXPERIMENTAL | |
577 | default n | |
578 | help | |
579 | If you say yes here you get support for Linear Technology LTC4215 | |
580 | Hot Swap Controller I2C interface. | |
581 | ||
582 | This driver can also be built as a module. If so, the module will | |
583 | be called ltc4215. | |
584 | ||
585 | config SENSORS_LTC4245 | |
586 | tristate "Linear Technology LTC4245" | |
587 | depends on I2C && EXPERIMENTAL | |
588 | default n | |
589 | help | |
590 | If you say yes here you get support for Linear Technology LTC4245 | |
591 | Multiple Supply Hot Swap Controller I2C interface. | |
592 | ||
593 | This driver can also be built as a module. If so, the module will | |
594 | be called ltc4245. | |
595 | ||
596 | config SENSORS_LM95241 | |
597 | tristate "National Semiconductor LM95241 sensor chip" | |
598 | depends on I2C | |
599 | help | |
600 | If you say yes here you get support for LM95241 sensor chip. | |
601 | ||
602 | This driver can also be built as a module. If so, the module | |
603 | will be called lm95241. | |
604 | ||
605 | config SENSORS_MAX1111 | |
606 | tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" | |
607 | depends on SPI_MASTER | |
608 | help | |
609 | Say y here to support Maxim's MAX1111 ADC chips. | |
610 | ||
611 | This driver can also be built as a module. If so, the module | |
612 | will be called max1111. | |
613 | ||
614 | config SENSORS_MAX1619 | |
615 | tristate "Maxim MAX1619 sensor chip" | |
616 | depends on I2C | |
617 | help | |
618 | If you say yes here you get support for MAX1619 sensor chip. | |
619 | ||
620 | This driver can also be built as a module. If so, the module | |
621 | will be called max1619. | |
622 | ||
623 | config SENSORS_MAX6650 | |
624 | tristate "Maxim MAX6650 sensor chip" | |
625 | depends on I2C && EXPERIMENTAL | |
626 | help | |
627 | If you say yes here you get support for the MAX6650 / MAX6651 | |
628 | sensor chips. | |
629 | ||
630 | This driver can also be built as a module. If so, the module | |
631 | will be called max6650. | |
632 | ||
633 | config SENSORS_PC87360 | |
634 | tristate "National Semiconductor PC87360 family" | |
635 | select HWMON_VID | |
636 | help | |
637 | If you say yes here you get access to the hardware monitoring | |
638 | functions of the National Semiconductor PC8736x Super-I/O chips. | |
639 | The PC87360, PC87363 and PC87364 only have fan monitoring and | |
640 | control. The PC87365 and PC87366 additionally have voltage and | |
641 | temperature monitoring. | |
642 | ||
643 | This driver can also be built as a module. If so, the module | |
644 | will be called pc87360. | |
645 | ||
646 | config SENSORS_PC87427 | |
647 | tristate "National Semiconductor PC87427" | |
648 | depends on EXPERIMENTAL | |
649 | help | |
650 | If you say yes here you get access to the hardware monitoring | |
651 | functions of the National Semiconductor PC87427 Super-I/O chip. | |
652 | The chip has two distinct logical devices, one for fan speed | |
653 | monitoring and control, and one for voltage and temperature | |
654 | monitoring. Only fan speed monitoring is supported right now. | |
655 | ||
656 | This driver can also be built as a module. If so, the module | |
657 | will be called pc87427. | |
658 | ||
659 | config SENSORS_PCF8591 | |
660 | tristate "Philips PCF8591 ADC/DAC" | |
661 | depends on I2C | |
662 | default n | |
663 | help | |
664 | If you say yes here you get support for Philips PCF8591 4-channel | |
665 | ADC, 1-channel DAC chips. | |
666 | ||
667 | This driver can also be built as a module. If so, the module | |
668 | will be called pcf8591. | |
669 | ||
670 | These devices are hard to detect and rarely found on mainstream | |
671 | hardware. If unsure, say N. | |
672 | ||
673 | config SENSORS_SIS5595 | |
674 | tristate "Silicon Integrated Systems Corp. SiS5595" | |
675 | depends on PCI | |
676 | help | |
677 | If you say yes here you get support for the integrated sensors in | |
678 | SiS5595 South Bridges. | |
679 | ||
680 | This driver can also be built as a module. If so, the module | |
681 | will be called sis5595. | |
682 | ||
683 | config SENSORS_DME1737 | |
684 | tristate "SMSC DME1737, SCH311x and compatibles" | |
685 | depends on I2C && EXPERIMENTAL | |
686 | select HWMON_VID | |
687 | help | |
688 | If you say yes here you get support for the hardware monitoring | |
689 | and fan control features of the SMSC DME1737, SCH311x, SCH5027, and | |
690 | Asus A8000 Super-I/O chips. | |
691 | ||
692 | This driver can also be built as a module. If so, the module | |
693 | will be called dme1737. | |
694 | ||
695 | config SENSORS_SMSC47M1 | |
696 | tristate "SMSC LPC47M10x and compatibles" | |
697 | help | |
698 | If you say yes here you get support for the integrated fan | |
699 | monitoring and control capabilities of the SMSC LPC47B27x, | |
700 | LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, | |
701 | LPC47M192, LPC47M292 and LPC47M997 chips. | |
702 | ||
703 | The temperature and voltage sensor features of the LPC47M15x, | |
704 | LPC47M192, LPC47M292 and LPC47M997 are supported by another | |
705 | driver, select also "SMSC LPC47M192 and compatibles" below for | |
706 | those. | |
707 | ||
708 | This driver can also be built as a module. If so, the module | |
709 | will be called smsc47m1. | |
710 | ||
711 | config SENSORS_SMSC47M192 | |
712 | tristate "SMSC LPC47M192 and compatibles" | |
713 | depends on I2C && EXPERIMENTAL | |
714 | select HWMON_VID | |
715 | help | |
716 | If you say yes here you get support for the temperature and | |
717 | voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 | |
718 | and LPC47M997 chips. | |
719 | ||
720 | The fan monitoring and control capabilities of these chips | |
721 | are supported by another driver, select | |
722 | "SMSC LPC47M10x and compatibles" above. You need both drivers | |
723 | if you want fan control and voltage/temperature sensor support. | |
724 | ||
725 | This driver can also be built as a module. If so, the module | |
726 | will be called smsc47m192. | |
727 | ||
728 | config SENSORS_SMSC47B397 | |
729 | tristate "SMSC LPC47B397-NC" | |
730 | depends on EXPERIMENTAL | |
731 | help | |
732 | If you say yes here you get support for the SMSC LPC47B397-NC | |
733 | sensor chip. | |
734 | ||
735 | This driver can also be built as a module. If so, the module | |
736 | will be called smsc47b397. | |
737 | ||
738 | config SENSORS_ADS7828 | |
739 | tristate "Texas Instruments ADS7828" | |
740 | depends on I2C | |
741 | help | |
742 | If you say yes here you get support for Texas Instruments ADS7828 | |
743 | 12-bit 8-channel ADC device. | |
744 | ||
745 | This driver can also be built as a module. If so, the module | |
746 | will be called ads7828. | |
747 | ||
748 | config SENSORS_THMC50 | |
749 | tristate "Texas Instruments THMC50 / Analog Devices ADM1022" | |
750 | depends on I2C && EXPERIMENTAL | |
751 | help | |
752 | If you say yes here you get support for Texas Instruments THMC50 | |
753 | sensor chips and clones: the Analog Devices ADM1022. | |
754 | ||
755 | This driver can also be built as a module. If so, the module | |
756 | will be called thmc50. | |
757 | ||
758 | config SENSORS_VIA686A | |
759 | tristate "VIA686A" | |
760 | depends on PCI | |
761 | help | |
762 | If you say yes here you get support for the integrated sensors in | |
763 | Via 686A/B South Bridges. | |
764 | ||
765 | This driver can also be built as a module. If so, the module | |
766 | will be called via686a. | |
767 | ||
768 | config SENSORS_VT1211 | |
769 | tristate "VIA VT1211" | |
770 | depends on EXPERIMENTAL | |
771 | select HWMON_VID | |
772 | help | |
773 | If you say yes here then you get support for hardware monitoring | |
774 | features of the VIA VT1211 Super-I/O chip. | |
775 | ||
776 | This driver can also be built as a module. If so, the module | |
777 | will be called vt1211. | |
778 | ||
779 | config SENSORS_VT8231 | |
780 | tristate "VIA VT8231" | |
781 | depends on PCI | |
782 | select HWMON_VID | |
783 | help | |
784 | If you say yes here then you get support for the integrated sensors | |
785 | in the VIA VT8231 device. | |
786 | ||
787 | This driver can also be built as a module. If so, the module | |
788 | will be called vt8231. | |
789 | ||
790 | config SENSORS_W83781D | |
791 | tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" | |
792 | depends on I2C | |
793 | select HWMON_VID | |
794 | help | |
795 | If you say yes here you get support for the Winbond W8378x series | |
796 | of sensor chips: the W83781D, W83782D and W83783S, and the similar | |
797 | Asus AS99127F. | |
798 | ||
799 | This driver can also be built as a module. If so, the module | |
800 | will be called w83781d. | |
801 | ||
802 | config SENSORS_W83791D | |
803 | tristate "Winbond W83791D" | |
804 | depends on I2C && EXPERIMENTAL | |
805 | select HWMON_VID | |
806 | help | |
807 | If you say yes here you get support for the Winbond W83791D chip. | |
808 | ||
809 | This driver can also be built as a module. If so, the module | |
810 | will be called w83791d. | |
811 | ||
812 | config SENSORS_W83792D | |
813 | tristate "Winbond W83792D" | |
814 | depends on I2C && EXPERIMENTAL | |
815 | help | |
816 | If you say yes here you get support for the Winbond W83792D chip. | |
817 | ||
818 | This driver can also be built as a module. If so, the module | |
819 | will be called w83792d. | |
820 | ||
821 | config SENSORS_W83793 | |
822 | tristate "Winbond W83793" | |
823 | depends on I2C && EXPERIMENTAL | |
824 | select HWMON_VID | |
825 | help | |
826 | If you say yes here you get support for the Winbond W83793 | |
827 | hardware monitoring chip. | |
828 | ||
829 | This driver can also be built as a module. If so, the module | |
830 | will be called w83793. | |
831 | ||
832 | config SENSORS_W83L785TS | |
833 | tristate "Winbond W83L785TS-S" | |
834 | depends on I2C && EXPERIMENTAL | |
835 | help | |
836 | If you say yes here you get support for the Winbond W83L785TS-S | |
837 | sensor chip, which is used on the Asus A7N8X, among other | |
838 | motherboards. | |
839 | ||
840 | This driver can also be built as a module. If so, the module | |
841 | will be called w83l785ts. | |
842 | ||
843 | config SENSORS_W83L786NG | |
844 | tristate "Winbond W83L786NG, W83L786NR" | |
845 | depends on I2C && EXPERIMENTAL | |
846 | help | |
847 | If you say yes here you get support for the Winbond W83L786NG | |
848 | and W83L786NR sensor chips. | |
849 | ||
850 | This driver can also be built as a module. If so, the module | |
851 | will be called w83l786ng. | |
852 | ||
853 | config SENSORS_W83627HF | |
854 | tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" | |
855 | select HWMON_VID | |
856 | help | |
857 | If you say yes here you get support for the Winbond W836X7 series | |
858 | of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and | |
859 | W83697HF. | |
860 | ||
861 | This driver can also be built as a module. If so, the module | |
862 | will be called w83627hf. | |
863 | ||
864 | config SENSORS_W83627EHF | |
865 | tristate "Winbond W83627EHF/EHG/DHG, W83667HG" | |
866 | select HWMON_VID | |
867 | help | |
868 | If you say yes here you get support for the hardware | |
869 | monitoring functionality of the Winbond W83627EHF Super-I/O chip. | |
870 | ||
871 | This driver also supports the W83627EHG, which is the lead-free | |
872 | version of the W83627EHF, and the W83627DHG, which is a similar | |
873 | chip suited for specific Intel processors that use PECI such as | |
874 | the Core 2 Duo. | |
875 | ||
876 | This driver also supports the W83667HG chip. | |
877 | ||
878 | This driver can also be built as a module. If so, the module | |
879 | will be called w83627ehf. | |
880 | ||
881 | config SENSORS_ULTRA45 | |
882 | tristate "Sun Ultra45 PIC16F747" | |
883 | depends on SPARC64 | |
884 | help | |
885 | This driver provides support for the Ultra45 workstation environmental | |
886 | sensors. | |
887 | ||
888 | config SENSORS_HDAPS | |
889 | tristate "IBM Hard Drive Active Protection System (hdaps)" | |
890 | depends on INPUT && X86 | |
891 | select INPUT_POLLDEV | |
892 | default n | |
893 | help | |
894 | This driver provides support for the IBM Hard Drive Active Protection | |
895 | System (hdaps), which provides an accelerometer and other misc. data. | |
896 | ThinkPads starting with the R50, T41, and X40 are supported. The | |
897 | accelerometer data is readable via sysfs. | |
898 | ||
899 | This driver also provides an absolute input class device, allowing | |
900 | the laptop to act as a pinball machine-esque joystick. | |
901 | ||
902 | If your ThinkPad is not recognized by the driver, please update to latest | |
903 | BIOS. This is especially the case for some R52 ThinkPads. | |
904 | ||
905 | Say Y here if you have an applicable laptop and want to experience | |
906 | the awesome power of hdaps. | |
907 | ||
908 | config SENSORS_LIS3LV02D | |
909 | tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" | |
910 | depends on ACPI && INPUT | |
911 | select NEW_LEDS | |
912 | select LEDS_CLASS | |
913 | default n | |
914 | help | |
915 | This driver provides support for the LIS3LV02Dx accelerometer. In | |
916 | particular, it can be found in a number of HP laptops, which have the | |
917 | "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such | |
918 | systems the driver should load automatically (via ACPI). The | |
919 | accelerometer might also be found in other systems, connected via SPI | |
920 | or I2C. The accelerometer data is readable via | |
921 | /sys/devices/platform/lis3lv02d. | |
922 | ||
923 | This driver also provides an absolute input class device, allowing | |
924 | the laptop to act as a pinball machine-esque joystick. On HP laptops, | |
925 | if the led infrastructure is activated, support for a led indicating | |
926 | disk protection will be provided as hp:red:hddprotection. | |
927 | ||
928 | This driver can also be built as modules. If so, the core module | |
929 | will be called lis3lv02d and a specific module for HP laptops will be | |
930 | called hp_accel. | |
931 | ||
932 | Say Y here if you have an applicable laptop and want to experience | |
933 | the awesome power of lis3lv02d. | |
934 | ||
935 | config SENSORS_LIS3_SPI | |
936 | tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" | |
937 | depends on !ACPI && SPI_MASTER && INPUT | |
938 | default n | |
939 | help | |
940 | This driver provides support for the LIS3LV02Dx accelerometer connected | |
941 | via SPI. The accelerometer data is readable via | |
942 | /sys/devices/platform/lis3lv02d. | |
943 | ||
944 | This driver also provides an absolute input class device, allowing | |
945 | the laptop to act as a pinball machine-esque joystick. | |
946 | ||
947 | This driver can also be built as modules. If so, the core module | |
948 | will be called lis3lv02d and a specific module for the SPI transport | |
949 | is called lis3lv02d_spi. | |
950 | ||
951 | config SENSORS_APPLESMC | |
952 | tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" | |
953 | depends on INPUT && X86 | |
954 | select NEW_LEDS | |
955 | select LEDS_CLASS | |
956 | select INPUT_POLLDEV | |
957 | default n | |
958 | help | |
959 | This driver provides support for the Apple System Management | |
960 | Controller, which provides an accelerometer (Apple Sudden Motion | |
961 | Sensor), light sensors, temperature sensors, keyboard backlight | |
962 | control and fan control. | |
963 | ||
964 | Only Intel-based Apple's computers are supported (MacBook Pro, | |
965 | MacBook, MacMini). | |
966 | ||
967 | Data from the different sensors, keyboard backlight control and fan | |
968 | control are accessible via sysfs. | |
969 | ||
970 | This driver also provides an absolute input class device, allowing | |
971 | the laptop to act as a pinball machine-esque joystick. | |
972 | ||
973 | Say Y here if you have an applicable laptop and want to experience | |
974 | the awesome power of applesmc. | |
975 | ||
976 | config HWMON_DEBUG_CHIP | |
977 | bool "Hardware Monitoring Chip debugging messages" | |
978 | default n | |
979 | help | |
980 | Say Y here if you want the I2C chip drivers to produce a bunch of | |
981 | debug messages to the system log. Select this if you are having | |
982 | a problem with I2C support and want to see more of what is going | |
983 | on. | |
984 | ||
985 | endif # HWMON |