]>
Commit | Line | Data |
---|---|---|
1 | # | |
2 | # Hardware monitoring chip drivers configuration | |
3 | # | |
4 | ||
5 | menuconfig HWMON | |
6 | tristate "Hardware Monitoring support" | |
7 | depends on HAS_IOMEM | |
8 | default y | |
9 | help | |
10 | Hardware monitoring devices let you monitor the hardware health | |
11 | of a system. Most modern motherboards include such a device. It | |
12 | can include temperature sensors, voltage sensors, fan speed | |
13 | sensors and various additional features such as the ability to | |
14 | control the speed of the fans. If you want this support you | |
15 | should say Y here and also to the specific driver(s) for your | |
16 | sensors chip(s) below. | |
17 | ||
18 | To find out which specific driver(s) you need, use the | |
19 | sensors-detect script from the lm_sensors package. Read | |
20 | <file:Documentation/hwmon/userspace-tools> for details. | |
21 | ||
22 | This support can also be built as a module. If so, the module | |
23 | will be called hwmon. | |
24 | ||
25 | if HWMON | |
26 | ||
27 | config HWMON_VID | |
28 | tristate | |
29 | default n | |
30 | ||
31 | config HWMON_DEBUG_CHIP | |
32 | bool "Hardware Monitoring Chip debugging messages" | |
33 | default n | |
34 | help | |
35 | Say Y here if you want the I2C chip drivers to produce a bunch of | |
36 | debug messages to the system log. Select this if you are having | |
37 | a problem with I2C support and want to see more of what is going | |
38 | on. | |
39 | ||
40 | comment "Native drivers" | |
41 | ||
42 | config SENSORS_AB8500 | |
43 | tristate "AB8500 thermal monitoring" | |
44 | depends on AB8500_GPADC && AB8500_BM | |
45 | default n | |
46 | help | |
47 | If you say yes here you get support for the thermal sensor part | |
48 | of the AB8500 chip. The driver includes thermal management for | |
49 | AB8500 die and two GPADC channels. The GPADC channel are preferably | |
50 | used to access sensors outside the AB8500 chip. | |
51 | ||
52 | This driver can also be built as a module. If so, the module | |
53 | will be called abx500-temp. | |
54 | ||
55 | config SENSORS_ABITUGURU | |
56 | tristate "Abit uGuru (rev 1 & 2)" | |
57 | depends on X86 && DMI | |
58 | help | |
59 | If you say yes here you get support for the sensor part of the first | |
60 | and second revision of the Abit uGuru chip. The voltage and frequency | |
61 | control parts of the Abit uGuru are not supported. The Abit uGuru | |
62 | chip can be found on Abit uGuru featuring motherboards (most modern | |
63 | Abit motherboards from before end 2005). For more info and a list | |
64 | of which motherboards have which revision see | |
65 | Documentation/hwmon/abituguru | |
66 | ||
67 | This driver can also be built as a module. If so, the module | |
68 | will be called abituguru. | |
69 | ||
70 | config SENSORS_ABITUGURU3 | |
71 | tristate "Abit uGuru (rev 3)" | |
72 | depends on X86 && DMI | |
73 | help | |
74 | If you say yes here you get support for the sensor part of the | |
75 | third revision of the Abit uGuru chip. Only reading the sensors | |
76 | and their settings is supported. The third revision of the Abit | |
77 | uGuru chip can be found on recent Abit motherboards (since end | |
78 | 2005). For more info and a list of which motherboards have which | |
79 | revision see Documentation/hwmon/abituguru3 | |
80 | ||
81 | This driver can also be built as a module. If so, the module | |
82 | will be called abituguru3. | |
83 | ||
84 | config SENSORS_AD7314 | |
85 | tristate "Analog Devices AD7314 and compatibles" | |
86 | depends on SPI | |
87 | help | |
88 | If you say yes here you get support for the Analog Devices | |
89 | AD7314, ADT7301 and ADT7302 temperature sensors. | |
90 | ||
91 | This driver can also be built as a module. If so, the module | |
92 | will be called ad7314. | |
93 | ||
94 | config SENSORS_AD7414 | |
95 | tristate "Analog Devices AD7414" | |
96 | depends on I2C | |
97 | help | |
98 | If you say yes here you get support for the Analog Devices | |
99 | AD7414 temperature monitoring chip. | |
100 | ||
101 | This driver can also be built as a module. If so, the module | |
102 | will be called ad7414. | |
103 | ||
104 | config SENSORS_AD7418 | |
105 | tristate "Analog Devices AD7416, AD7417 and AD7418" | |
106 | depends on I2C | |
107 | help | |
108 | If you say yes here you get support for the Analog Devices | |
109 | AD7416, AD7417 and AD7418 temperature monitoring chips. | |
110 | ||
111 | This driver can also be built as a module. If so, the module | |
112 | will be called ad7418. | |
113 | ||
114 | config SENSORS_ADM1021 | |
115 | tristate "Analog Devices ADM1021 and compatibles" | |
116 | depends on I2C | |
117 | help | |
118 | If you say yes here you get support for Analog Devices ADM1021 | |
119 | and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, | |
120 | Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. | |
121 | ||
122 | This driver can also be built as a module. If so, the module | |
123 | will be called adm1021. | |
124 | ||
125 | config SENSORS_ADM1025 | |
126 | tristate "Analog Devices ADM1025 and compatibles" | |
127 | depends on I2C | |
128 | select HWMON_VID | |
129 | help | |
130 | If you say yes here you get support for Analog Devices ADM1025 | |
131 | and Philips NE1619 sensor chips. | |
132 | ||
133 | This driver can also be built as a module. If so, the module | |
134 | will be called adm1025. | |
135 | ||
136 | config SENSORS_ADM1026 | |
137 | tristate "Analog Devices ADM1026 and compatibles" | |
138 | depends on I2C | |
139 | select HWMON_VID | |
140 | help | |
141 | If you say yes here you get support for Analog Devices ADM1026 | |
142 | sensor chip. | |
143 | ||
144 | This driver can also be built as a module. If so, the module | |
145 | will be called adm1026. | |
146 | ||
147 | config SENSORS_ADM1029 | |
148 | tristate "Analog Devices ADM1029" | |
149 | depends on I2C | |
150 | help | |
151 | If you say yes here you get support for Analog Devices ADM1029 | |
152 | sensor chip. | |
153 | Very rare chip, please let us know you use it. | |
154 | ||
155 | This driver can also be built as a module. If so, the module | |
156 | will be called adm1029. | |
157 | ||
158 | config SENSORS_ADM1031 | |
159 | tristate "Analog Devices ADM1031 and compatibles" | |
160 | depends on I2C | |
161 | help | |
162 | If you say yes here you get support for Analog Devices ADM1031 | |
163 | and ADM1030 sensor chips. | |
164 | ||
165 | This driver can also be built as a module. If so, the module | |
166 | will be called adm1031. | |
167 | ||
168 | config SENSORS_ADM9240 | |
169 | tristate "Analog Devices ADM9240 and compatibles" | |
170 | depends on I2C | |
171 | select HWMON_VID | |
172 | help | |
173 | If you say yes here you get support for Analog Devices ADM9240, | |
174 | Dallas DS1780, National Semiconductor LM81 sensor chips. | |
175 | ||
176 | This driver can also be built as a module. If so, the module | |
177 | will be called adm9240. | |
178 | ||
179 | config SENSORS_ADT7X10 | |
180 | tristate | |
181 | help | |
182 | This module contains common code shared by the ADT7310/ADT7320 and | |
183 | ADT7410/ADT7420 temperature monitoring chip drivers. | |
184 | ||
185 | If build as a module, the module will be called adt7x10. | |
186 | ||
187 | config SENSORS_ADT7310 | |
188 | tristate "Analog Devices ADT7310/ADT7320" | |
189 | depends on SPI_MASTER | |
190 | select SENSORS_ADT7X10 | |
191 | help | |
192 | If you say yes here you get support for the Analog Devices | |
193 | ADT7310 and ADT7320 temperature monitoring chips. | |
194 | ||
195 | This driver can also be built as a module. If so, the module | |
196 | will be called adt7310. | |
197 | ||
198 | config SENSORS_ADT7410 | |
199 | tristate "Analog Devices ADT7410/ADT7420" | |
200 | depends on I2C | |
201 | select SENSORS_ADT7X10 | |
202 | help | |
203 | If you say yes here you get support for the Analog Devices | |
204 | ADT7410 and ADT7420 temperature monitoring chips. | |
205 | ||
206 | This driver can also be built as a module. If so, the module | |
207 | will be called adt7410. | |
208 | ||
209 | config SENSORS_ADT7411 | |
210 | tristate "Analog Devices ADT7411" | |
211 | depends on I2C | |
212 | help | |
213 | If you say yes here you get support for the Analog Devices | |
214 | ADT7411 voltage and temperature monitoring chip. | |
215 | ||
216 | This driver can also be built as a module. If so, the module | |
217 | will be called adt7411. | |
218 | ||
219 | config SENSORS_ADT7462 | |
220 | tristate "Analog Devices ADT7462" | |
221 | depends on I2C | |
222 | help | |
223 | If you say yes here you get support for the Analog Devices | |
224 | ADT7462 temperature monitoring chips. | |
225 | ||
226 | This driver can also be built as a module. If so, the module | |
227 | will be called adt7462. | |
228 | ||
229 | config SENSORS_ADT7470 | |
230 | tristate "Analog Devices ADT7470" | |
231 | depends on I2C | |
232 | help | |
233 | If you say yes here you get support for the Analog Devices | |
234 | ADT7470 temperature monitoring chips. | |
235 | ||
236 | This driver can also be built as a module. If so, the module | |
237 | will be called adt7470. | |
238 | ||
239 | config SENSORS_ADT7475 | |
240 | tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" | |
241 | depends on I2C | |
242 | select HWMON_VID | |
243 | help | |
244 | If you say yes here you get support for the Analog Devices | |
245 | ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring | |
246 | chips. | |
247 | ||
248 | This driver can also be build as a module. If so, the module | |
249 | will be called adt7475. | |
250 | ||
251 | config SENSORS_ASC7621 | |
252 | tristate "Andigilog aSC7621" | |
253 | depends on I2C | |
254 | help | |
255 | If you say yes here you get support for the aSC7621 | |
256 | family of SMBus sensors chip found on most Intel X38, X48, X58, | |
257 | 945, 965 and 975 desktop boards. Currently supported chips: | |
258 | aSC7621 | |
259 | aSC7621a | |
260 | ||
261 | This driver can also be built as a module. If so, the module | |
262 | will be called asc7621. | |
263 | ||
264 | config SENSORS_K8TEMP | |
265 | tristate "AMD Athlon64/FX or Opteron temperature sensor" | |
266 | depends on X86 && PCI | |
267 | help | |
268 | If you say yes here you get support for the temperature | |
269 | sensor(s) inside your CPU. Supported is whole AMD K8 | |
270 | microarchitecture. Please note that you will need at least | |
271 | lm-sensors 2.10.1 for proper userspace support. | |
272 | ||
273 | This driver can also be built as a module. If so, the module | |
274 | will be called k8temp. | |
275 | ||
276 | config SENSORS_K10TEMP | |
277 | tristate "AMD Family 10h+ temperature sensor" | |
278 | depends on X86 && PCI | |
279 | help | |
280 | If you say yes here you get support for the temperature | |
281 | sensor(s) inside your CPU. Supported are later revisions of | |
282 | the AMD Family 10h and all revisions of the AMD Family 11h, | |
283 | 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) | |
284 | and 16h (Kabini/Mullins) microarchitectures. | |
285 | ||
286 | This driver can also be built as a module. If so, the module | |
287 | will be called k10temp. | |
288 | ||
289 | config SENSORS_FAM15H_POWER | |
290 | tristate "AMD Family 15h processor power" | |
291 | depends on X86 && PCI && CPU_SUP_AMD | |
292 | help | |
293 | If you say yes here you get support for processor power | |
294 | information of your AMD family 15h CPU. | |
295 | ||
296 | This driver can also be built as a module. If so, the module | |
297 | will be called fam15h_power. | |
298 | ||
299 | config SENSORS_APPLESMC | |
300 | tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" | |
301 | depends on INPUT && X86 | |
302 | select NEW_LEDS | |
303 | select LEDS_CLASS | |
304 | select INPUT_POLLDEV | |
305 | default n | |
306 | help | |
307 | This driver provides support for the Apple System Management | |
308 | Controller, which provides an accelerometer (Apple Sudden Motion | |
309 | Sensor), light sensors, temperature sensors, keyboard backlight | |
310 | control and fan control. | |
311 | ||
312 | Only Intel-based Apple's computers are supported (MacBook Pro, | |
313 | MacBook, MacMini). | |
314 | ||
315 | Data from the different sensors, keyboard backlight control and fan | |
316 | control are accessible via sysfs. | |
317 | ||
318 | This driver also provides an absolute input class device, allowing | |
319 | the laptop to act as a pinball machine-esque joystick. | |
320 | ||
321 | Say Y here if you have an applicable laptop and want to experience | |
322 | the awesome power of applesmc. | |
323 | ||
324 | config SENSORS_ARM_SCPI | |
325 | tristate "ARM SCPI Sensors" | |
326 | depends on ARM_SCPI_PROTOCOL | |
327 | depends on THERMAL || !THERMAL_OF | |
328 | help | |
329 | This driver provides support for temperature, voltage, current | |
330 | and power sensors available on ARM Ltd's SCP based platforms. The | |
331 | actual number and type of sensors exported depend on the platform. | |
332 | ||
333 | config SENSORS_ASB100 | |
334 | tristate "Asus ASB100 Bach" | |
335 | depends on X86 && I2C | |
336 | select HWMON_VID | |
337 | help | |
338 | If you say yes here you get support for the ASB100 Bach sensor | |
339 | chip found on some Asus mainboards. | |
340 | ||
341 | This driver can also be built as a module. If so, the module | |
342 | will be called asb100. | |
343 | ||
344 | config SENSORS_ASPEED | |
345 | tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" | |
346 | select REGMAP | |
347 | help | |
348 | This driver provides support for ASPEED AST2400/AST2500 PWM | |
349 | and Fan Tacho controllers. | |
350 | ||
351 | This driver can also be built as a module. If so, the module | |
352 | will be called aspeed_pwm_tacho. | |
353 | ||
354 | config SENSORS_ATXP1 | |
355 | tristate "Attansic ATXP1 VID controller" | |
356 | depends on I2C | |
357 | select HWMON_VID | |
358 | help | |
359 | If you say yes here you get support for the Attansic ATXP1 VID | |
360 | controller. | |
361 | ||
362 | If your board have such a chip, you are able to control your CPU | |
363 | core and other voltages. | |
364 | ||
365 | This driver can also be built as a module. If so, the module | |
366 | will be called atxp1. | |
367 | ||
368 | config SENSORS_DS620 | |
369 | tristate "Dallas Semiconductor DS620" | |
370 | depends on I2C | |
371 | help | |
372 | If you say yes here you get support for Dallas Semiconductor | |
373 | DS620 sensor chip. | |
374 | ||
375 | This driver can also be built as a module. If so, the module | |
376 | will be called ds620. | |
377 | ||
378 | config SENSORS_DS1621 | |
379 | tristate "Dallas Semiconductor DS1621 and compatibles" | |
380 | depends on I2C | |
381 | help | |
382 | If you say yes here you get support for Dallas Semiconductor/Maxim | |
383 | Integrated DS1621 sensor chips and compatible models including: | |
384 | ||
385 | - Dallas Semiconductor DS1625 | |
386 | - Maxim Integrated DS1631 | |
387 | - Maxim Integrated DS1721 | |
388 | - Maxim Integrated DS1731 | |
389 | ||
390 | This driver can also be built as a module. If so, the module | |
391 | will be called ds1621. | |
392 | ||
393 | config SENSORS_DELL_SMM | |
394 | tristate "Dell laptop SMM BIOS hwmon driver" | |
395 | depends on X86 | |
396 | help | |
397 | This hwmon driver adds support for reporting temperature of different | |
398 | sensors and controls the fans on Dell laptops via System Management | |
399 | Mode provided by Dell BIOS. | |
400 | ||
401 | When option I8K is also enabled this driver provides legacy /proc/i8k | |
402 | userspace interface for i8kutils package. | |
403 | ||
404 | config SENSORS_DA9052_ADC | |
405 | tristate "Dialog DA9052/DA9053 ADC" | |
406 | depends on PMIC_DA9052 | |
407 | help | |
408 | Say y here to support the ADC found on Dialog Semiconductor | |
409 | DA9052-BC and DA9053-AA/Bx PMICs. | |
410 | ||
411 | This driver can also be built as module. If so, the module | |
412 | will be called da9052-hwmon. | |
413 | ||
414 | config SENSORS_DA9055 | |
415 | tristate "Dialog Semiconductor DA9055 ADC" | |
416 | depends on MFD_DA9055 | |
417 | help | |
418 | If you say yes here you get support for ADC on the Dialog | |
419 | Semiconductor DA9055 PMIC. | |
420 | ||
421 | This driver can also be built as a module. If so, the module | |
422 | will be called da9055-hwmon. | |
423 | ||
424 | config SENSORS_I5K_AMB | |
425 | tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" | |
426 | depends on PCI | |
427 | help | |
428 | If you say yes here you get support for FB-DIMM AMB temperature | |
429 | monitoring chips on systems with the Intel 5000 series chipset. | |
430 | ||
431 | This driver can also be built as a module. If so, the module | |
432 | will be called i5k_amb. | |
433 | ||
434 | config SENSORS_F71805F | |
435 | tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" | |
436 | depends on !PPC | |
437 | help | |
438 | If you say yes here you get support for hardware monitoring | |
439 | features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG | |
440 | Super-I/O chips. | |
441 | ||
442 | This driver can also be built as a module. If so, the module | |
443 | will be called f71805f. | |
444 | ||
445 | config SENSORS_F71882FG | |
446 | tristate "Fintek F71882FG and compatibles" | |
447 | depends on !PPC | |
448 | help | |
449 | If you say yes here you get support for hardware monitoring | |
450 | features of many Fintek Super-I/O (LPC) chips. The currently | |
451 | supported chips are: | |
452 | F71808E/A | |
453 | F71858FG | |
454 | F71862FG | |
455 | F71863FG | |
456 | F71869F/E/A | |
457 | F71882FG | |
458 | F71883FG | |
459 | F71889FG/ED/A | |
460 | F8000 | |
461 | F81801U | |
462 | F81865F | |
463 | ||
464 | This driver can also be built as a module. If so, the module | |
465 | will be called f71882fg. | |
466 | ||
467 | config SENSORS_F75375S | |
468 | tristate "Fintek F75375S/SP, F75373 and F75387" | |
469 | depends on I2C | |
470 | help | |
471 | If you say yes here you get support for hardware monitoring | |
472 | features of the Fintek F75375S/SP, F75373 and F75387 | |
473 | ||
474 | This driver can also be built as a module. If so, the module | |
475 | will be called f75375s. | |
476 | ||
477 | config SENSORS_MC13783_ADC | |
478 | tristate "Freescale MC13783/MC13892 ADC" | |
479 | depends on MFD_MC13XXX | |
480 | help | |
481 | Support for the A/D converter on MC13783 and MC13892 PMIC. | |
482 | ||
483 | config SENSORS_FSCHMD | |
484 | tristate "Fujitsu Siemens Computers sensor chips" | |
485 | depends on X86 && I2C | |
486 | help | |
487 | If you say yes here you get support for the following Fujitsu | |
488 | Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, | |
489 | Heimdall, Heracles, Hades and Syleus including support for the | |
490 | integrated watchdog. | |
491 | ||
492 | This is a merged driver for FSC sensor chips replacing the fscpos, | |
493 | fscscy and fscher drivers and adding support for several other FSC | |
494 | sensor chips. | |
495 | ||
496 | This driver can also be built as a module. If so, the module | |
497 | will be called fschmd. | |
498 | ||
499 | config SENSORS_FTSTEUTATES | |
500 | tristate "Fujitsu Technology Solutions sensor chip Teutates" | |
501 | depends on I2C && WATCHDOG | |
502 | select WATCHDOG_CORE | |
503 | help | |
504 | If you say yes here you get support for the Fujitsu Technology | |
505 | Solutions (FTS) sensor chip "Teutates" including support for | |
506 | the integrated watchdog. | |
507 | ||
508 | This driver can also be built as a module. If so, the module | |
509 | will be called ftsteutates. | |
510 | ||
511 | config SENSORS_GL518SM | |
512 | tristate "Genesys Logic GL518SM" | |
513 | depends on I2C | |
514 | help | |
515 | If you say yes here you get support for Genesys Logic GL518SM | |
516 | sensor chips. | |
517 | ||
518 | This driver can also be built as a module. If so, the module | |
519 | will be called gl518sm. | |
520 | ||
521 | config SENSORS_GL520SM | |
522 | tristate "Genesys Logic GL520SM" | |
523 | depends on I2C | |
524 | select HWMON_VID | |
525 | help | |
526 | If you say yes here you get support for Genesys Logic GL520SM | |
527 | sensor chips. | |
528 | ||
529 | This driver can also be built as a module. If so, the module | |
530 | will be called gl520sm. | |
531 | ||
532 | config SENSORS_G760A | |
533 | tristate "GMT G760A" | |
534 | depends on I2C | |
535 | help | |
536 | If you say yes here you get support for Global Mixed-mode | |
537 | Technology Inc G760A fan speed PWM controller chips. | |
538 | ||
539 | This driver can also be built as a module. If so, the module | |
540 | will be called g760a. | |
541 | ||
542 | config SENSORS_G762 | |
543 | tristate "GMT G762 and G763" | |
544 | depends on I2C | |
545 | help | |
546 | If you say yes here you get support for Global Mixed-mode | |
547 | Technology Inc G762 and G763 fan speed PWM controller chips. | |
548 | ||
549 | This driver can also be built as a module. If so, the module | |
550 | will be called g762. | |
551 | ||
552 | config SENSORS_GPIO_FAN | |
553 | tristate "GPIO fan" | |
554 | depends on GPIOLIB || COMPILE_TEST | |
555 | depends on THERMAL || THERMAL=n | |
556 | help | |
557 | If you say yes here you get support for fans connected to GPIO lines. | |
558 | ||
559 | This driver can also be built as a module. If so, the module | |
560 | will be called gpio-fan. | |
561 | ||
562 | config SENSORS_HIH6130 | |
563 | tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" | |
564 | depends on I2C | |
565 | help | |
566 | If you say yes here you get support for Honeywell Humidicon | |
567 | HIH-6130 and HIH-6131 Humidicon humidity sensors. | |
568 | ||
569 | This driver can also be built as a module. If so, the module | |
570 | will be called hih6130. | |
571 | ||
572 | config SENSORS_IBMAEM | |
573 | tristate "IBM Active Energy Manager temperature/power sensors and control" | |
574 | select IPMI_SI | |
575 | depends on IPMI_HANDLER | |
576 | help | |
577 | If you say yes here you get support for the temperature and | |
578 | power sensors and capping hardware in various IBM System X | |
579 | servers that support Active Energy Manager. This includes | |
580 | the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, | |
581 | and certain HC10/HS2x/LS2x/QS2x blades. | |
582 | ||
583 | This driver can also be built as a module. If so, the module | |
584 | will be called ibmaem. | |
585 | ||
586 | config SENSORS_IBMPEX | |
587 | tristate "IBM PowerExecutive temperature/power sensors" | |
588 | select IPMI_SI | |
589 | depends on IPMI_HANDLER | |
590 | help | |
591 | If you say yes here you get support for the temperature and | |
592 | power sensors in various IBM System X servers that support | |
593 | PowerExecutive. So far this includes the x3350, x3550, x3650, | |
594 | x3655, and x3755; the x3800, x3850, and x3950 models that have | |
595 | PCI Express; and some of the HS2x, LS2x, and QS2x blades. | |
596 | ||
597 | This driver can also be built as a module. If so, the module | |
598 | will be called ibmpex. | |
599 | ||
600 | config SENSORS_IBMPOWERNV | |
601 | tristate "IBM POWERNV platform sensors" | |
602 | depends on PPC_POWERNV | |
603 | default y | |
604 | help | |
605 | If you say yes here you get support for the temperature/fan/power | |
606 | sensors on your PowerNV platform. | |
607 | ||
608 | This driver can also be built as a module. If so, the module | |
609 | will be called ibmpowernv. | |
610 | ||
611 | config SENSORS_IIO_HWMON | |
612 | tristate "Hwmon driver that uses channels specified via iio maps" | |
613 | depends on IIO | |
614 | help | |
615 | This is a platform driver that in combination with a suitable | |
616 | map allows IIO devices to provide basic hwmon functionality | |
617 | for those channels specified in the map. This map can be provided | |
618 | either via platform data or the device tree bindings. | |
619 | ||
620 | config SENSORS_I5500 | |
621 | tristate "Intel 5500/5520/X58 temperature sensor" | |
622 | depends on X86 && PCI | |
623 | help | |
624 | If you say yes here you get support for the temperature | |
625 | sensor inside the Intel 5500, 5520 and X58 chipsets. | |
626 | ||
627 | This driver can also be built as a module. If so, the module | |
628 | will be called i5500_temp. | |
629 | ||
630 | config SENSORS_CORETEMP | |
631 | tristate "Intel Core/Core2/Atom temperature sensor" | |
632 | depends on X86 | |
633 | help | |
634 | If you say yes here you get support for the temperature | |
635 | sensor inside your CPU. Most of the family 6 CPUs | |
636 | are supported. Check Documentation/hwmon/coretemp for details. | |
637 | ||
638 | config SENSORS_IT87 | |
639 | tristate "ITE IT87xx and compatibles" | |
640 | depends on !PPC | |
641 | select HWMON_VID | |
642 | help | |
643 | If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, | |
644 | IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, | |
645 | IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, | |
646 | IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 | |
647 | clone. | |
648 | ||
649 | This driver can also be built as a module. If so, the module | |
650 | will be called it87. | |
651 | ||
652 | config SENSORS_JZ4740 | |
653 | tristate "Ingenic JZ4740 SoC ADC driver" | |
654 | depends on MACH_JZ4740 && MFD_JZ4740_ADC | |
655 | help | |
656 | If you say yes here you get support for reading adc values from the ADCIN | |
657 | pin on Ingenic JZ4740 SoC based boards. | |
658 | ||
659 | This driver can also be build as a module. If so, the module will be | |
660 | called jz4740-hwmon. | |
661 | ||
662 | config SENSORS_JC42 | |
663 | tristate "JEDEC JC42.4 compliant memory module temperature sensors" | |
664 | depends on I2C | |
665 | help | |
666 | If you say yes here, you get support for JEDEC JC42.4 compliant | |
667 | temperature sensors, which are used on many DDR3 memory modules for | |
668 | mobile devices and servers. Support will include, but not be limited | |
669 | to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, | |
670 | MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, | |
671 | STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. | |
672 | ||
673 | This driver can also be built as a module. If so, the module | |
674 | will be called jc42. | |
675 | ||
676 | config SENSORS_POWR1220 | |
677 | tristate "Lattice POWR1220 Power Monitoring" | |
678 | depends on I2C | |
679 | default n | |
680 | help | |
681 | If you say yes here you get access to the hardware monitoring | |
682 | functions of the Lattice POWR1220 isp Power Supply Monitoring, | |
683 | Sequencing and Margining Controller. | |
684 | ||
685 | This driver can also be built as a module. If so, the module | |
686 | will be called powr1220. | |
687 | ||
688 | config SENSORS_LINEAGE | |
689 | tristate "Lineage Compact Power Line Power Entry Module" | |
690 | depends on I2C | |
691 | help | |
692 | If you say yes here you get support for the Lineage Compact Power Line | |
693 | series of DC/DC and AC/DC converters such as CP1800, CP2000AC, | |
694 | CP2000DC, CP2725, and others. | |
695 | ||
696 | This driver can also be built as a module. If so, the module | |
697 | will be called lineage-pem. | |
698 | ||
699 | config SENSORS_LTC2945 | |
700 | tristate "Linear Technology LTC2945" | |
701 | depends on I2C | |
702 | select REGMAP_I2C | |
703 | default n | |
704 | help | |
705 | If you say yes here you get support for Linear Technology LTC2945 | |
706 | I2C System Monitor. | |
707 | ||
708 | This driver can also be built as a module. If so, the module will | |
709 | be called ltc2945. | |
710 | ||
711 | config SENSORS_LTC2990 | |
712 | tristate "Linear Technology LTC2990 (current monitoring mode only)" | |
713 | depends on I2C | |
714 | help | |
715 | If you say yes here you get support for Linear Technology LTC2990 | |
716 | I2C System Monitor. The LTC2990 supports a combination of voltage, | |
717 | current and temperature monitoring, but in addition to the Vcc supply | |
718 | voltage and chip temperature, this driver currently only supports | |
719 | reading two currents by measuring two differential voltages across | |
720 | series resistors. | |
721 | ||
722 | This driver can also be built as a module. If so, the module will | |
723 | be called ltc2990. | |
724 | ||
725 | config SENSORS_LTC4151 | |
726 | tristate "Linear Technology LTC4151" | |
727 | depends on I2C | |
728 | default n | |
729 | help | |
730 | If you say yes here you get support for Linear Technology LTC4151 | |
731 | High Voltage I2C Current and Voltage Monitor interface. | |
732 | ||
733 | This driver can also be built as a module. If so, the module will | |
734 | be called ltc4151. | |
735 | ||
736 | config SENSORS_LTC4215 | |
737 | tristate "Linear Technology LTC4215" | |
738 | depends on I2C | |
739 | default n | |
740 | help | |
741 | If you say yes here you get support for Linear Technology LTC4215 | |
742 | Hot Swap Controller I2C interface. | |
743 | ||
744 | This driver can also be built as a module. If so, the module will | |
745 | be called ltc4215. | |
746 | ||
747 | config SENSORS_LTC4222 | |
748 | tristate "Linear Technology LTC4222" | |
749 | depends on I2C | |
750 | select REGMAP_I2C | |
751 | default n | |
752 | help | |
753 | If you say yes here you get support for Linear Technology LTC4222 | |
754 | Dual Hot Swap Controller I2C interface. | |
755 | ||
756 | This driver can also be built as a module. If so, the module will | |
757 | be called ltc4222. | |
758 | ||
759 | config SENSORS_LTC4245 | |
760 | tristate "Linear Technology LTC4245" | |
761 | depends on I2C | |
762 | default n | |
763 | help | |
764 | If you say yes here you get support for Linear Technology LTC4245 | |
765 | Multiple Supply Hot Swap Controller I2C interface. | |
766 | ||
767 | This driver can also be built as a module. If so, the module will | |
768 | be called ltc4245. | |
769 | ||
770 | config SENSORS_LTC4260 | |
771 | tristate "Linear Technology LTC4260" | |
772 | depends on I2C | |
773 | select REGMAP_I2C | |
774 | default n | |
775 | help | |
776 | If you say yes here you get support for Linear Technology LTC4260 | |
777 | Positive Voltage Hot Swap Controller I2C interface. | |
778 | ||
779 | This driver can also be built as a module. If so, the module will | |
780 | be called ltc4260. | |
781 | ||
782 | config SENSORS_LTC4261 | |
783 | tristate "Linear Technology LTC4261" | |
784 | depends on I2C | |
785 | default n | |
786 | help | |
787 | If you say yes here you get support for Linear Technology LTC4261 | |
788 | Negative Voltage Hot Swap Controller I2C interface. | |
789 | ||
790 | This driver can also be built as a module. If so, the module will | |
791 | be called ltc4261. | |
792 | ||
793 | config SENSORS_MAX1111 | |
794 | tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" | |
795 | depends on SPI_MASTER | |
796 | help | |
797 | Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 | |
798 | ADC chips. | |
799 | ||
800 | This driver can also be built as a module. If so, the module | |
801 | will be called max1111. | |
802 | ||
803 | config SENSORS_MAX16065 | |
804 | tristate "Maxim MAX16065 System Manager and compatibles" | |
805 | depends on I2C | |
806 | help | |
807 | If you say yes here you get support for hardware monitoring | |
808 | capabilities of the following Maxim System Manager chips. | |
809 | MAX16065 | |
810 | MAX16066 | |
811 | MAX16067 | |
812 | MAX16068 | |
813 | MAX16070 | |
814 | MAX16071 | |
815 | ||
816 | This driver can also be built as a module. If so, the module | |
817 | will be called max16065. | |
818 | ||
819 | config SENSORS_MAX1619 | |
820 | tristate "Maxim MAX1619 sensor chip" | |
821 | depends on I2C | |
822 | help | |
823 | If you say yes here you get support for MAX1619 sensor chip. | |
824 | ||
825 | This driver can also be built as a module. If so, the module | |
826 | will be called max1619. | |
827 | ||
828 | config SENSORS_MAX1668 | |
829 | tristate "Maxim MAX1668 and compatibles" | |
830 | depends on I2C | |
831 | help | |
832 | If you say yes here you get support for MAX1668, MAX1989 and | |
833 | MAX1805 chips. | |
834 | ||
835 | This driver can also be built as a module. If so, the module | |
836 | will be called max1668. | |
837 | ||
838 | config SENSORS_MAX197 | |
839 | tristate "Maxim MAX197 and compatibles" | |
840 | help | |
841 | Support for the Maxim MAX197 A/D converter. | |
842 | Support will include, but not be limited to, MAX197, and MAX199. | |
843 | ||
844 | This driver can also be built as a module. If so, the module | |
845 | will be called max197. | |
846 | ||
847 | config SENSORS_MAX31722 | |
848 | tristate "MAX31722 temperature sensor" | |
849 | depends on SPI | |
850 | help | |
851 | Support for the Maxim Integrated MAX31722/MAX31723 digital | |
852 | thermometers/thermostats operating over an SPI interface. | |
853 | ||
854 | This driver can also be built as a module. If so, the module | |
855 | will be called max31722. | |
856 | ||
857 | config SENSORS_MAX6639 | |
858 | tristate "Maxim MAX6639 sensor chip" | |
859 | depends on I2C | |
860 | help | |
861 | If you say yes here you get support for the MAX6639 | |
862 | sensor chips. | |
863 | ||
864 | This driver can also be built as a module. If so, the module | |
865 | will be called max6639. | |
866 | ||
867 | config SENSORS_MAX6642 | |
868 | tristate "Maxim MAX6642 sensor chip" | |
869 | depends on I2C | |
870 | help | |
871 | If you say yes here you get support for MAX6642 sensor chip. | |
872 | MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor | |
873 | with Overtemperature Alarm from Maxim. | |
874 | ||
875 | This driver can also be built as a module. If so, the module | |
876 | will be called max6642. | |
877 | ||
878 | config SENSORS_MAX6650 | |
879 | tristate "Maxim MAX6650 sensor chip" | |
880 | depends on I2C | |
881 | help | |
882 | If you say yes here you get support for the MAX6650 / MAX6651 | |
883 | sensor chips. | |
884 | ||
885 | This driver can also be built as a module. If so, the module | |
886 | will be called max6650. | |
887 | ||
888 | config SENSORS_MAX6697 | |
889 | tristate "Maxim MAX6697 and compatibles" | |
890 | depends on I2C | |
891 | help | |
892 | If you say yes here you get support for MAX6581, MAX6602, MAX6622, | |
893 | MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 | |
894 | temperature sensor chips. | |
895 | ||
896 | This driver can also be built as a module. If so, the module | |
897 | will be called max6697. | |
898 | ||
899 | config SENSORS_MAX31790 | |
900 | tristate "Maxim MAX31790 sensor chip" | |
901 | depends on I2C | |
902 | help | |
903 | If you say yes here you get support for 6-Channel PWM-Output | |
904 | Fan RPM Controller. | |
905 | ||
906 | This driver can also be built as a module. If so, the module | |
907 | will be called max31790. | |
908 | ||
909 | config SENSORS_MCP3021 | |
910 | tristate "Microchip MCP3021 and compatibles" | |
911 | depends on I2C | |
912 | help | |
913 | If you say yes here you get support for MCP3021 and MCP3221. | |
914 | The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 | |
915 | with 12-bit resolution. | |
916 | ||
917 | This driver can also be built as a module. If so, the module | |
918 | will be called mcp3021. | |
919 | ||
920 | config SENSORS_TC654 | |
921 | tristate "Microchip TC654/TC655 and compatibles" | |
922 | depends on I2C | |
923 | help | |
924 | If you say yes here you get support for TC654 and TC655. | |
925 | The TC654 and TC655 are PWM mode fan speed controllers with | |
926 | FanSense technology for use with brushless DC fans. | |
927 | ||
928 | This driver can also be built as a module. If so, the module | |
929 | will be called tc654. | |
930 | ||
931 | config SENSORS_MENF21BMC_HWMON | |
932 | tristate "MEN 14F021P00 BMC Hardware Monitoring" | |
933 | depends on MFD_MENF21BMC | |
934 | help | |
935 | Say Y here to include support for the MEN 14F021P00 BMC | |
936 | hardware monitoring. | |
937 | ||
938 | This driver can also be built as a module. If so the module | |
939 | will be called menf21bmc_hwmon. | |
940 | ||
941 | config SENSORS_ADCXX | |
942 | tristate "National Semiconductor ADCxxxSxxx" | |
943 | depends on SPI_MASTER | |
944 | help | |
945 | If you say yes here you get support for the National Semiconductor | |
946 | ADC<bb><c>S<sss> chip family, where | |
947 | * bb is the resolution in number of bits (8, 10, 12) | |
948 | * c is the number of channels (1, 2, 4, 8) | |
949 | * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 | |
950 | kSPS and 101 for 1 MSPS) | |
951 | ||
952 | Examples : ADC081S101, ADC124S501, ... | |
953 | ||
954 | This driver can also be built as a module. If so, the module | |
955 | will be called adcxx. | |
956 | ||
957 | config SENSORS_LM63 | |
958 | tristate "National Semiconductor LM63 and compatibles" | |
959 | depends on I2C | |
960 | help | |
961 | If you say yes here you get support for the National | |
962 | Semiconductor LM63, LM64, and LM96163 remote diode digital temperature | |
963 | sensors with integrated fan control. Such chips are found | |
964 | on the Tyan S4882 (Thunder K8QS Pro) motherboard, among | |
965 | others. | |
966 | ||
967 | This driver can also be built as a module. If so, the module | |
968 | will be called lm63. | |
969 | ||
970 | config SENSORS_LM70 | |
971 | tristate "National Semiconductor LM70 and compatibles" | |
972 | depends on SPI_MASTER | |
973 | help | |
974 | If you say yes here you get support for the National Semiconductor | |
975 | LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera- | |
976 | ture sensor chips. | |
977 | ||
978 | This driver can also be built as a module. If so, the module | |
979 | will be called lm70. | |
980 | ||
981 | config SENSORS_LM73 | |
982 | tristate "National Semiconductor LM73" | |
983 | depends on I2C | |
984 | help | |
985 | If you say yes here you get support for National Semiconductor LM73 | |
986 | sensor chips. | |
987 | This driver can also be built as a module. If so, the module | |
988 | will be called lm73. | |
989 | ||
990 | config SENSORS_LM75 | |
991 | tristate "National Semiconductor LM75 and compatibles" | |
992 | depends on I2C | |
993 | select REGMAP_I2C | |
994 | help | |
995 | If you say yes here you get support for one common type of | |
996 | temperature sensor chip, with models including: | |
997 | ||
998 | - Analog Devices ADT75 | |
999 | - Dallas Semiconductor DS75, DS1775 and DS7505 | |
1000 | - Global Mixed-mode Technology (GMT) G751 | |
1001 | - Maxim MAX6625 and MAX6626 | |
1002 | - Microchip MCP980x | |
1003 | - National Semiconductor LM75, LM75A | |
1004 | - NXP's LM75A | |
1005 | - ST Microelectronics STDS75 | |
1006 | - TelCom (now Microchip) TCN75 | |
1007 | - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, | |
1008 | TMP175, TMP275 | |
1009 | ||
1010 | This driver supports driver model based binding through board | |
1011 | specific I2C device tables. | |
1012 | ||
1013 | It also supports the "legacy" style of driver binding. To use | |
1014 | that with some chips which don't replicate LM75 quirks exactly, | |
1015 | you may need the "force" module parameter. | |
1016 | ||
1017 | This driver can also be built as a module. If so, the module | |
1018 | will be called lm75. | |
1019 | ||
1020 | config SENSORS_LM77 | |
1021 | tristate "National Semiconductor LM77" | |
1022 | depends on I2C | |
1023 | help | |
1024 | If you say yes here you get support for National Semiconductor LM77 | |
1025 | sensor chips. | |
1026 | ||
1027 | This driver can also be built as a module. If so, the module | |
1028 | will be called lm77. | |
1029 | ||
1030 | config SENSORS_LM78 | |
1031 | tristate "National Semiconductor LM78 and compatibles" | |
1032 | depends on I2C | |
1033 | select HWMON_VID | |
1034 | help | |
1035 | If you say yes here you get support for National Semiconductor LM78, | |
1036 | LM78-J and LM79. | |
1037 | ||
1038 | This driver can also be built as a module. If so, the module | |
1039 | will be called lm78. | |
1040 | ||
1041 | config SENSORS_LM80 | |
1042 | tristate "National Semiconductor LM80 and LM96080" | |
1043 | depends on I2C | |
1044 | help | |
1045 | If you say yes here you get support for National Semiconductor | |
1046 | LM80 and LM96080 sensor chips. | |
1047 | ||
1048 | This driver can also be built as a module. If so, the module | |
1049 | will be called lm80. | |
1050 | ||
1051 | config SENSORS_LM83 | |
1052 | tristate "National Semiconductor LM83 and compatibles" | |
1053 | depends on I2C | |
1054 | help | |
1055 | If you say yes here you get support for National Semiconductor | |
1056 | LM82 and LM83 sensor chips. | |
1057 | ||
1058 | This driver can also be built as a module. If so, the module | |
1059 | will be called lm83. | |
1060 | ||
1061 | config SENSORS_LM85 | |
1062 | tristate "National Semiconductor LM85 and compatibles" | |
1063 | depends on I2C | |
1064 | select HWMON_VID | |
1065 | help | |
1066 | If you say yes here you get support for National Semiconductor LM85 | |
1067 | sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, | |
1068 | EMC6D101, EMC6D102, and EMC6D103. | |
1069 | ||
1070 | This driver can also be built as a module. If so, the module | |
1071 | will be called lm85. | |
1072 | ||
1073 | config SENSORS_LM87 | |
1074 | tristate "National Semiconductor LM87 and compatibles" | |
1075 | depends on I2C | |
1076 | select HWMON_VID | |
1077 | help | |
1078 | If you say yes here you get support for National Semiconductor LM87 | |
1079 | and Analog Devices ADM1024 sensor chips. | |
1080 | ||
1081 | This driver can also be built as a module. If so, the module | |
1082 | will be called lm87. | |
1083 | ||
1084 | config SENSORS_LM90 | |
1085 | tristate "National Semiconductor LM90 and compatibles" | |
1086 | depends on I2C | |
1087 | help | |
1088 | If you say yes here you get support for National Semiconductor LM90, | |
1089 | LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, | |
1090 | Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, | |
1091 | MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, | |
1092 | Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, GMT G781, and | |
1093 | Texas Instruments TMP451 sensor chips. | |
1094 | ||
1095 | This driver can also be built as a module. If so, the module | |
1096 | will be called lm90. | |
1097 | ||
1098 | config SENSORS_LM92 | |
1099 | tristate "National Semiconductor LM92 and compatibles" | |
1100 | depends on I2C | |
1101 | help | |
1102 | If you say yes here you get support for National Semiconductor LM92 | |
1103 | and Maxim MAX6635 sensor chips. | |
1104 | ||
1105 | This driver can also be built as a module. If so, the module | |
1106 | will be called lm92. | |
1107 | ||
1108 | config SENSORS_LM93 | |
1109 | tristate "National Semiconductor LM93 and compatibles" | |
1110 | depends on I2C | |
1111 | select HWMON_VID | |
1112 | help | |
1113 | If you say yes here you get support for National Semiconductor LM93, | |
1114 | LM94, and compatible sensor chips. | |
1115 | ||
1116 | This driver can also be built as a module. If so, the module | |
1117 | will be called lm93. | |
1118 | ||
1119 | config SENSORS_LM95234 | |
1120 | tristate "National Semiconductor LM95234 and compatibles" | |
1121 | depends on I2C | |
1122 | help | |
1123 | If you say yes here you get support for the LM95233 and LM95234 | |
1124 | temperature sensor chips. | |
1125 | ||
1126 | This driver can also be built as a module. If so, the module | |
1127 | will be called lm95234. | |
1128 | ||
1129 | config SENSORS_LM95241 | |
1130 | tristate "National Semiconductor LM95241 and compatibles" | |
1131 | depends on I2C | |
1132 | help | |
1133 | If you say yes here you get support for LM95231 and LM95241 sensor | |
1134 | chips. | |
1135 | ||
1136 | This driver can also be built as a module. If so, the module | |
1137 | will be called lm95241. | |
1138 | ||
1139 | config SENSORS_LM95245 | |
1140 | tristate "National Semiconductor LM95245 and compatibles" | |
1141 | depends on I2C | |
1142 | select REGMAP_I2C | |
1143 | help | |
1144 | If you say yes here you get support for LM95235 and LM95245 | |
1145 | temperature sensor chips. | |
1146 | ||
1147 | This driver can also be built as a module. If so, the module | |
1148 | will be called lm95245. | |
1149 | ||
1150 | config SENSORS_PC87360 | |
1151 | tristate "National Semiconductor PC87360 family" | |
1152 | depends on !PPC | |
1153 | select HWMON_VID | |
1154 | help | |
1155 | If you say yes here you get access to the hardware monitoring | |
1156 | functions of the National Semiconductor PC8736x Super-I/O chips. | |
1157 | The PC87360, PC87363 and PC87364 only have fan monitoring and | |
1158 | control. The PC87365 and PC87366 additionally have voltage and | |
1159 | temperature monitoring. | |
1160 | ||
1161 | This driver can also be built as a module. If so, the module | |
1162 | will be called pc87360. | |
1163 | ||
1164 | config SENSORS_PC87427 | |
1165 | tristate "National Semiconductor PC87427" | |
1166 | depends on !PPC | |
1167 | help | |
1168 | If you say yes here you get access to the hardware monitoring | |
1169 | functions of the National Semiconductor PC87427 Super-I/O chip. | |
1170 | The chip has two distinct logical devices, one for fan speed | |
1171 | monitoring and control, and one for voltage and temperature | |
1172 | monitoring. Fan speed monitoring and control are supported, as | |
1173 | well as temperature monitoring. Voltages aren't supported yet. | |
1174 | ||
1175 | This driver can also be built as a module. If so, the module | |
1176 | will be called pc87427. | |
1177 | ||
1178 | config SENSORS_NTC_THERMISTOR | |
1179 | tristate "NTC thermistor support from Murata" | |
1180 | depends on !OF || IIO=n || IIO | |
1181 | depends on THERMAL || !THERMAL_OF | |
1182 | help | |
1183 | This driver supports NTC thermistors sensor reading and its | |
1184 | interpretation. The driver can also monitor the temperature and | |
1185 | send notifications about the temperature. | |
1186 | ||
1187 | Currently, this driver supports | |
1188 | NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, | |
1189 | NCP03WF104 and NCP15XH103 from Murata and B57330V2103 from EPCOS. | |
1190 | ||
1191 | This driver can also be built as a module. If so, the module | |
1192 | will be called ntc-thermistor. | |
1193 | ||
1194 | config SENSORS_NCT6683 | |
1195 | tristate "Nuvoton NCT6683D" | |
1196 | depends on !PPC | |
1197 | help | |
1198 | If you say yes here you get support for the hardware monitoring | |
1199 | functionality of the Nuvoton NCT6683D eSIO chip. | |
1200 | ||
1201 | This driver can also be built as a module. If so, the module | |
1202 | will be called nct6683. | |
1203 | ||
1204 | config SENSORS_NCT6775 | |
1205 | tristate "Nuvoton NCT6775F and compatibles" | |
1206 | depends on !PPC | |
1207 | select HWMON_VID | |
1208 | help | |
1209 | If you say yes here you get support for the hardware monitoring | |
1210 | functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, | |
1211 | NCT6791D, NCT6792D, NCT6793D, and compatible Super-I/O chips. This | |
1212 | driver replaces the w83627ehf driver for NCT6775F and NCT6776F. | |
1213 | ||
1214 | This driver can also be built as a module. If so, the module | |
1215 | will be called nct6775. | |
1216 | ||
1217 | config SENSORS_NCT7802 | |
1218 | tristate "Nuvoton NCT7802Y" | |
1219 | depends on I2C | |
1220 | select REGMAP_I2C | |
1221 | help | |
1222 | If you say yes here you get support for the Nuvoton NCT7802Y | |
1223 | hardware monitoring chip. | |
1224 | ||
1225 | This driver can also be built as a module. If so, the module | |
1226 | will be called nct7802. | |
1227 | ||
1228 | config SENSORS_NCT7904 | |
1229 | tristate "Nuvoton NCT7904" | |
1230 | depends on I2C | |
1231 | help | |
1232 | If you say yes here you get support for the Nuvoton NCT7904 | |
1233 | hardware monitoring chip, including manual fan speed control. | |
1234 | ||
1235 | This driver can also be built as a module. If so, the module | |
1236 | will be called nct7904. | |
1237 | ||
1238 | config SENSORS_NSA320 | |
1239 | tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" | |
1240 | depends on GPIOLIB && OF | |
1241 | depends on MACH_KIRKWOOD || COMPILE_TEST | |
1242 | help | |
1243 | If you say yes here you get support for hardware monitoring | |
1244 | for the ZyXEL NSA320 Media Server and other compatible devices | |
1245 | (probably the NSA325 and some NSA310 variants). | |
1246 | ||
1247 | The sensor data is taken from a Holtek HT46R065 microcontroller | |
1248 | connected to GPIO lines. | |
1249 | ||
1250 | This driver can also be built as a module. If so, the module | |
1251 | will be called nsa320-hwmon. | |
1252 | ||
1253 | config SENSORS_PCF8591 | |
1254 | tristate "Philips PCF8591 ADC/DAC" | |
1255 | depends on I2C | |
1256 | default n | |
1257 | help | |
1258 | If you say yes here you get support for Philips PCF8591 4-channel | |
1259 | ADC, 1-channel DAC chips. | |
1260 | ||
1261 | This driver can also be built as a module. If so, the module | |
1262 | will be called pcf8591. | |
1263 | ||
1264 | These devices are hard to detect and rarely found on mainstream | |
1265 | hardware. If unsure, say N. | |
1266 | ||
1267 | source drivers/hwmon/pmbus/Kconfig | |
1268 | ||
1269 | config SENSORS_PWM_FAN | |
1270 | tristate "PWM fan" | |
1271 | depends on (PWM && OF) || COMPILE_TEST | |
1272 | depends on THERMAL || THERMAL=n | |
1273 | help | |
1274 | If you say yes here you get support for fans connected to PWM lines. | |
1275 | The driver uses the generic PWM interface, thus it will work on a | |
1276 | variety of SoCs. | |
1277 | ||
1278 | This driver can also be built as a module. If so, the module | |
1279 | will be called pwm-fan. | |
1280 | ||
1281 | config SENSORS_SHT15 | |
1282 | tristate "Sensiron humidity and temperature sensors. SHT15 and compat." | |
1283 | depends on GPIOLIB || COMPILE_TEST | |
1284 | select BITREVERSE | |
1285 | help | |
1286 | If you say yes here you get support for the Sensiron SHT10, SHT11, | |
1287 | SHT15, SHT71, SHT75 humidity and temperature sensors. | |
1288 | ||
1289 | This driver can also be built as a module. If so, the module | |
1290 | will be called sht15. | |
1291 | ||
1292 | config SENSORS_SHT21 | |
1293 | tristate "Sensiron humidity and temperature sensors. SHT21 and compat." | |
1294 | depends on I2C | |
1295 | help | |
1296 | If you say yes here you get support for the Sensiron SHT21, SHT25 | |
1297 | humidity and temperature sensors. | |
1298 | ||
1299 | This driver can also be built as a module. If so, the module | |
1300 | will be called sht21. | |
1301 | ||
1302 | config SENSORS_SHT3x | |
1303 | tristate "Sensiron humidity and temperature sensors. SHT3x and compat." | |
1304 | depends on I2C | |
1305 | select CRC8 | |
1306 | help | |
1307 | If you say yes here you get support for the Sensiron SHT30 and SHT31 | |
1308 | humidity and temperature sensors. | |
1309 | ||
1310 | This driver can also be built as a module. If so, the module | |
1311 | will be called sht3x. | |
1312 | ||
1313 | config SENSORS_SHTC1 | |
1314 | tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." | |
1315 | depends on I2C | |
1316 | help | |
1317 | If you say yes here you get support for the Sensiron SHTC1 and SHTW1 | |
1318 | humidity and temperature sensors. | |
1319 | ||
1320 | This driver can also be built as a module. If so, the module | |
1321 | will be called shtc1. | |
1322 | ||
1323 | config SENSORS_S3C | |
1324 | tristate "Samsung built-in ADC" | |
1325 | depends on S3C_ADC | |
1326 | help | |
1327 | If you say yes here you get support for the on-board ADCs of | |
1328 | the Samsung S3C24XX, S3C64XX and other series of SoC | |
1329 | ||
1330 | This driver can also be built as a module. If so, the module | |
1331 | will be called s3c-hwmon. | |
1332 | ||
1333 | config SENSORS_S3C_RAW | |
1334 | bool "Include raw channel attributes in sysfs" | |
1335 | depends on SENSORS_S3C | |
1336 | help | |
1337 | Say Y here if you want to include raw copies of all the ADC | |
1338 | channels in sysfs. | |
1339 | ||
1340 | config SENSORS_SIS5595 | |
1341 | tristate "Silicon Integrated Systems Corp. SiS5595" | |
1342 | depends on PCI | |
1343 | help | |
1344 | If you say yes here you get support for the integrated sensors in | |
1345 | SiS5595 South Bridges. | |
1346 | ||
1347 | This driver can also be built as a module. If so, the module | |
1348 | will be called sis5595. | |
1349 | ||
1350 | config SENSORS_DME1737 | |
1351 | tristate "SMSC DME1737, SCH311x and compatibles" | |
1352 | depends on I2C && !PPC | |
1353 | select HWMON_VID | |
1354 | help | |
1355 | If you say yes here you get support for the hardware monitoring | |
1356 | and fan control features of the SMSC DME1737, SCH311x, SCH5027, and | |
1357 | Asus A8000 Super-I/O chips. | |
1358 | ||
1359 | This driver can also be built as a module. If so, the module | |
1360 | will be called dme1737. | |
1361 | ||
1362 | config SENSORS_EMC1403 | |
1363 | tristate "SMSC EMC1403/23 thermal sensor" | |
1364 | depends on I2C | |
1365 | select REGMAP_I2C | |
1366 | help | |
1367 | If you say yes here you get support for the SMSC EMC1403/23 | |
1368 | temperature monitoring chip. | |
1369 | ||
1370 | Threshold values can be configured using sysfs. | |
1371 | Data from the different diodes are accessible via sysfs. | |
1372 | ||
1373 | config SENSORS_EMC2103 | |
1374 | tristate "SMSC EMC2103" | |
1375 | depends on I2C | |
1376 | help | |
1377 | If you say yes here you get support for the temperature | |
1378 | and fan sensors of the SMSC EMC2103 chips. | |
1379 | ||
1380 | This driver can also be built as a module. If so, the module | |
1381 | will be called emc2103. | |
1382 | ||
1383 | config SENSORS_EMC6W201 | |
1384 | tristate "SMSC EMC6W201" | |
1385 | depends on I2C | |
1386 | help | |
1387 | If you say yes here you get support for the SMSC EMC6W201 | |
1388 | hardware monitoring chip. | |
1389 | ||
1390 | This driver can also be built as a module. If so, the module | |
1391 | will be called emc6w201. | |
1392 | ||
1393 | config SENSORS_SMSC47M1 | |
1394 | tristate "SMSC LPC47M10x and compatibles" | |
1395 | depends on !PPC | |
1396 | help | |
1397 | If you say yes here you get support for the integrated fan | |
1398 | monitoring and control capabilities of the SMSC LPC47B27x, | |
1399 | LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, | |
1400 | LPC47M192, LPC47M292 and LPC47M997 chips. | |
1401 | ||
1402 | The temperature and voltage sensor features of the LPC47M15x, | |
1403 | LPC47M192, LPC47M292 and LPC47M997 are supported by another | |
1404 | driver, select also "SMSC LPC47M192 and compatibles" below for | |
1405 | those. | |
1406 | ||
1407 | This driver can also be built as a module. If so, the module | |
1408 | will be called smsc47m1. | |
1409 | ||
1410 | config SENSORS_SMSC47M192 | |
1411 | tristate "SMSC LPC47M192 and compatibles" | |
1412 | depends on I2C | |
1413 | select HWMON_VID | |
1414 | help | |
1415 | If you say yes here you get support for the temperature and | |
1416 | voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 | |
1417 | and LPC47M997 chips. | |
1418 | ||
1419 | The fan monitoring and control capabilities of these chips | |
1420 | are supported by another driver, select | |
1421 | "SMSC LPC47M10x and compatibles" above. You need both drivers | |
1422 | if you want fan control and voltage/temperature sensor support. | |
1423 | ||
1424 | This driver can also be built as a module. If so, the module | |
1425 | will be called smsc47m192. | |
1426 | ||
1427 | config SENSORS_SMSC47B397 | |
1428 | tristate "SMSC LPC47B397-NC" | |
1429 | depends on !PPC | |
1430 | help | |
1431 | If you say yes here you get support for the SMSC LPC47B397-NC | |
1432 | sensor chip. | |
1433 | ||
1434 | This driver can also be built as a module. If so, the module | |
1435 | will be called smsc47b397. | |
1436 | ||
1437 | config SENSORS_SCH56XX_COMMON | |
1438 | tristate | |
1439 | default n | |
1440 | ||
1441 | config SENSORS_SCH5627 | |
1442 | tristate "SMSC SCH5627" | |
1443 | depends on !PPC && WATCHDOG | |
1444 | select SENSORS_SCH56XX_COMMON | |
1445 | select WATCHDOG_CORE | |
1446 | help | |
1447 | If you say yes here you get support for the hardware monitoring | |
1448 | features of the SMSC SCH5627 Super-I/O chip including support for | |
1449 | the integrated watchdog. | |
1450 | ||
1451 | This driver can also be built as a module. If so, the module | |
1452 | will be called sch5627. | |
1453 | ||
1454 | config SENSORS_SCH5636 | |
1455 | tristate "SMSC SCH5636" | |
1456 | depends on !PPC && WATCHDOG | |
1457 | select SENSORS_SCH56XX_COMMON | |
1458 | select WATCHDOG_CORE | |
1459 | help | |
1460 | SMSC SCH5636 Super I/O chips include an embedded microcontroller for | |
1461 | hardware monitoring solutions, allowing motherboard manufacturers to | |
1462 | create their own custom hwmon solution based upon the SCH5636. | |
1463 | ||
1464 | Currently this driver only supports the Fujitsu Theseus SCH5636 based | |
1465 | hwmon solution. Say yes here if you want support for the Fujitsu | |
1466 | Theseus' hardware monitoring features including support for the | |
1467 | integrated watchdog. | |
1468 | ||
1469 | This driver can also be built as a module. If so, the module | |
1470 | will be called sch5636. | |
1471 | ||
1472 | config SENSORS_STTS751 | |
1473 | tristate "ST Microelectronics STTS751" | |
1474 | depends on I2C | |
1475 | help | |
1476 | If you say yes here you get support for STTS751 | |
1477 | temperature sensor chips. | |
1478 | ||
1479 | This driver can also be built as a module. If so, the module | |
1480 | will be called stts751. | |
1481 | ||
1482 | config SENSORS_SMM665 | |
1483 | tristate "Summit Microelectronics SMM665" | |
1484 | depends on I2C | |
1485 | default n | |
1486 | help | |
1487 | If you say yes here you get support for the hardware monitoring | |
1488 | features of the Summit Microelectronics SMM665/SMM665B Six-Channel | |
1489 | Active DC Output Controller / Monitor. | |
1490 | ||
1491 | Other supported chips are SMM465, SMM665C, SMM764, and SMM766. | |
1492 | Support for those chips is untested. | |
1493 | ||
1494 | This driver can also be built as a module. If so, the module will | |
1495 | be called smm665. | |
1496 | ||
1497 | config SENSORS_ADC128D818 | |
1498 | tristate "Texas Instruments ADC128D818" | |
1499 | depends on I2C | |
1500 | help | |
1501 | If you say yes here you get support for the Texas Instruments | |
1502 | ADC128D818 System Monitor with Temperature Sensor chip. | |
1503 | ||
1504 | This driver can also be built as a module. If so, the module | |
1505 | will be called adc128d818. | |
1506 | ||
1507 | config SENSORS_ADS1015 | |
1508 | tristate "Texas Instruments ADS1015" | |
1509 | depends on I2C | |
1510 | help | |
1511 | If you say yes here you get support for Texas Instruments | |
1512 | ADS1015/ADS1115 12/16-bit 4-input ADC device. | |
1513 | ||
1514 | This driver can also be built as a module. If so, the module | |
1515 | will be called ads1015. | |
1516 | ||
1517 | config SENSORS_ADS7828 | |
1518 | tristate "Texas Instruments ADS7828 and compatibles" | |
1519 | depends on I2C | |
1520 | select REGMAP_I2C | |
1521 | help | |
1522 | If you say yes here you get support for Texas Instruments ADS7828 and | |
1523 | ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while | |
1524 | it is 8-bit on ADS7830. | |
1525 | ||
1526 | This driver can also be built as a module. If so, the module | |
1527 | will be called ads7828. | |
1528 | ||
1529 | config SENSORS_ADS7871 | |
1530 | tristate "Texas Instruments ADS7871 A/D converter" | |
1531 | depends on SPI | |
1532 | help | |
1533 | If you say yes here you get support for TI ADS7871 & ADS7870 | |
1534 | ||
1535 | This driver can also be built as a module. If so, the module | |
1536 | will be called ads7871. | |
1537 | ||
1538 | config SENSORS_AMC6821 | |
1539 | tristate "Texas Instruments AMC6821" | |
1540 | depends on I2C | |
1541 | help | |
1542 | If you say yes here you get support for the Texas Instruments | |
1543 | AMC6821 hardware monitoring chips. | |
1544 | ||
1545 | This driver can also be build as a module. If so, the module | |
1546 | will be called amc6821. | |
1547 | ||
1548 | config SENSORS_INA209 | |
1549 | tristate "TI / Burr Brown INA209" | |
1550 | depends on I2C | |
1551 | help | |
1552 | If you say yes here you get support for the TI / Burr Brown INA209 | |
1553 | voltage / current / power monitor I2C interface. | |
1554 | ||
1555 | This driver can also be built as a module. If so, the module will | |
1556 | be called ina209. | |
1557 | ||
1558 | config SENSORS_INA2XX | |
1559 | tristate "Texas Instruments INA219 and compatibles" | |
1560 | depends on I2C | |
1561 | select REGMAP_I2C | |
1562 | help | |
1563 | If you say yes here you get support for INA219, INA220, INA226, | |
1564 | INA230, and INA231 power monitor chips. | |
1565 | ||
1566 | The INA2xx driver is configured for the default configuration of | |
1567 | the part as described in the datasheet. | |
1568 | Default value for Rshunt is 10 mOhms. | |
1569 | This driver can also be built as a module. If so, the module | |
1570 | will be called ina2xx. | |
1571 | ||
1572 | config SENSORS_INA3221 | |
1573 | tristate "Texas Instruments INA3221 Triple Power Monitor" | |
1574 | depends on I2C | |
1575 | select REGMAP_I2C | |
1576 | help | |
1577 | If you say yes here you get support for the TI INA3221 Triple Power | |
1578 | Monitor. | |
1579 | ||
1580 | This driver can also be built as a module. If so, the module | |
1581 | will be called ina3221. | |
1582 | ||
1583 | config SENSORS_TC74 | |
1584 | tristate "Microchip TC74" | |
1585 | depends on I2C | |
1586 | help | |
1587 | If you say yes here you get support for Microchip TC74 single | |
1588 | input temperature sensor chips. | |
1589 | ||
1590 | This driver can also be built as a module. If so, the module | |
1591 | will be called tc74. | |
1592 | ||
1593 | config SENSORS_THMC50 | |
1594 | tristate "Texas Instruments THMC50 / Analog Devices ADM1022" | |
1595 | depends on I2C | |
1596 | help | |
1597 | If you say yes here you get support for Texas Instruments THMC50 | |
1598 | sensor chips and clones: the Analog Devices ADM1022. | |
1599 | ||
1600 | This driver can also be built as a module. If so, the module | |
1601 | will be called thmc50. | |
1602 | ||
1603 | config SENSORS_TMP102 | |
1604 | tristate "Texas Instruments TMP102" | |
1605 | depends on I2C | |
1606 | select REGMAP_I2C | |
1607 | help | |
1608 | If you say yes here you get support for Texas Instruments TMP102 | |
1609 | sensor chips. | |
1610 | ||
1611 | This driver can also be built as a module. If so, the module | |
1612 | will be called tmp102. | |
1613 | ||
1614 | config SENSORS_TMP103 | |
1615 | tristate "Texas Instruments TMP103" | |
1616 | depends on I2C | |
1617 | select REGMAP_I2C | |
1618 | help | |
1619 | If you say yes here you get support for Texas Instruments TMP103 | |
1620 | sensor chips. | |
1621 | ||
1622 | This driver can also be built as a module. If so, the module | |
1623 | will be called tmp103. | |
1624 | ||
1625 | config SENSORS_TMP108 | |
1626 | tristate "Texas Instruments TMP108" | |
1627 | depends on I2C | |
1628 | select REGMAP_I2C | |
1629 | help | |
1630 | If you say yes here you get support for Texas Instruments TMP108 | |
1631 | sensor chips. | |
1632 | ||
1633 | This driver can also be built as a module. If so, the module | |
1634 | will be called tmp108. | |
1635 | ||
1636 | config SENSORS_TMP401 | |
1637 | tristate "Texas Instruments TMP401 and compatibles" | |
1638 | depends on I2C | |
1639 | help | |
1640 | If you say yes here you get support for Texas Instruments TMP401, | |
1641 | TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips. | |
1642 | ||
1643 | This driver can also be built as a module. If so, the module | |
1644 | will be called tmp401. | |
1645 | ||
1646 | config SENSORS_TMP421 | |
1647 | tristate "Texas Instruments TMP421 and compatible" | |
1648 | depends on I2C | |
1649 | help | |
1650 | If you say yes here you get support for Texas Instruments TMP421, | |
1651 | TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. | |
1652 | ||
1653 | This driver can also be built as a module. If so, the module | |
1654 | will be called tmp421. | |
1655 | ||
1656 | config SENSORS_VEXPRESS | |
1657 | tristate "Versatile Express" | |
1658 | depends on VEXPRESS_CONFIG | |
1659 | help | |
1660 | This driver provides support for hardware sensors available on | |
1661 | the ARM Ltd's Versatile Express platform. It can provide wide | |
1662 | range of information like temperature, power, energy. | |
1663 | ||
1664 | config SENSORS_VIA_CPUTEMP | |
1665 | tristate "VIA CPU temperature sensor" | |
1666 | depends on X86 | |
1667 | select HWMON_VID | |
1668 | help | |
1669 | If you say yes here you get support for the temperature | |
1670 | sensor inside your CPU. Supported are all known variants of | |
1671 | the VIA C7 and Nano. | |
1672 | ||
1673 | config SENSORS_VIA686A | |
1674 | tristate "VIA686A" | |
1675 | depends on PCI | |
1676 | help | |
1677 | If you say yes here you get support for the integrated sensors in | |
1678 | Via 686A/B South Bridges. | |
1679 | ||
1680 | This driver can also be built as a module. If so, the module | |
1681 | will be called via686a. | |
1682 | ||
1683 | config SENSORS_VT1211 | |
1684 | tristate "VIA VT1211" | |
1685 | depends on !PPC | |
1686 | select HWMON_VID | |
1687 | help | |
1688 | If you say yes here then you get support for hardware monitoring | |
1689 | features of the VIA VT1211 Super-I/O chip. | |
1690 | ||
1691 | This driver can also be built as a module. If so, the module | |
1692 | will be called vt1211. | |
1693 | ||
1694 | config SENSORS_VT8231 | |
1695 | tristate "VIA VT8231" | |
1696 | depends on PCI | |
1697 | select HWMON_VID | |
1698 | help | |
1699 | If you say yes here then you get support for the integrated sensors | |
1700 | in the VIA VT8231 device. | |
1701 | ||
1702 | This driver can also be built as a module. If so, the module | |
1703 | will be called vt8231. | |
1704 | ||
1705 | config SENSORS_W83781D | |
1706 | tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" | |
1707 | depends on I2C | |
1708 | select HWMON_VID | |
1709 | help | |
1710 | If you say yes here you get support for the Winbond W8378x series | |
1711 | of sensor chips: the W83781D, W83782D and W83783S, and the similar | |
1712 | Asus AS99127F. | |
1713 | ||
1714 | This driver can also be built as a module. If so, the module | |
1715 | will be called w83781d. | |
1716 | ||
1717 | config SENSORS_W83791D | |
1718 | tristate "Winbond W83791D" | |
1719 | depends on I2C | |
1720 | select HWMON_VID | |
1721 | help | |
1722 | If you say yes here you get support for the Winbond W83791D chip. | |
1723 | ||
1724 | This driver can also be built as a module. If so, the module | |
1725 | will be called w83791d. | |
1726 | ||
1727 | config SENSORS_W83792D | |
1728 | tristate "Winbond W83792D" | |
1729 | depends on I2C | |
1730 | help | |
1731 | If you say yes here you get support for the Winbond W83792D chip. | |
1732 | ||
1733 | This driver can also be built as a module. If so, the module | |
1734 | will be called w83792d. | |
1735 | ||
1736 | config SENSORS_W83793 | |
1737 | tristate "Winbond W83793" | |
1738 | depends on I2C | |
1739 | select HWMON_VID | |
1740 | help | |
1741 | If you say yes here you get support for the Winbond W83793 | |
1742 | hardware monitoring chip, including support for the integrated | |
1743 | watchdog. | |
1744 | ||
1745 | This driver can also be built as a module. If so, the module | |
1746 | will be called w83793. | |
1747 | ||
1748 | config SENSORS_W83795 | |
1749 | tristate "Winbond/Nuvoton W83795G/ADG" | |
1750 | depends on I2C | |
1751 | help | |
1752 | If you say yes here you get support for the Winbond W83795G and | |
1753 | W83795ADG hardware monitoring chip, including manual fan speed | |
1754 | control. | |
1755 | ||
1756 | This driver can also be built as a module. If so, the module | |
1757 | will be called w83795. | |
1758 | ||
1759 | config SENSORS_W83795_FANCTRL | |
1760 | bool "Include automatic fan control support (DANGEROUS)" | |
1761 | depends on SENSORS_W83795 | |
1762 | default n | |
1763 | help | |
1764 | If you say yes here, support for automatic fan speed control | |
1765 | will be included in the driver. | |
1766 | ||
1767 | This part of the code wasn't carefully reviewed and tested yet, | |
1768 | so enabling this option is strongly discouraged on production | |
1769 | servers. Only developers and testers should enable it for the | |
1770 | time being. | |
1771 | ||
1772 | Please also note that this option will create sysfs attribute | |
1773 | files which may change in the future, so you shouldn't rely | |
1774 | on them being stable. | |
1775 | ||
1776 | config SENSORS_W83L785TS | |
1777 | tristate "Winbond W83L785TS-S" | |
1778 | depends on I2C | |
1779 | help | |
1780 | If you say yes here you get support for the Winbond W83L785TS-S | |
1781 | sensor chip, which is used on the Asus A7N8X, among other | |
1782 | motherboards. | |
1783 | ||
1784 | This driver can also be built as a module. If so, the module | |
1785 | will be called w83l785ts. | |
1786 | ||
1787 | config SENSORS_W83L786NG | |
1788 | tristate "Winbond W83L786NG, W83L786NR" | |
1789 | depends on I2C | |
1790 | help | |
1791 | If you say yes here you get support for the Winbond W83L786NG | |
1792 | and W83L786NR sensor chips. | |
1793 | ||
1794 | This driver can also be built as a module. If so, the module | |
1795 | will be called w83l786ng. | |
1796 | ||
1797 | config SENSORS_W83627HF | |
1798 | tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" | |
1799 | depends on !PPC | |
1800 | select HWMON_VID | |
1801 | help | |
1802 | If you say yes here you get support for the Winbond W836X7 series | |
1803 | of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and | |
1804 | W83697HF. | |
1805 | ||
1806 | This driver can also be built as a module. If so, the module | |
1807 | will be called w83627hf. | |
1808 | ||
1809 | config SENSORS_W83627EHF | |
1810 | tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F" | |
1811 | depends on !PPC | |
1812 | select HWMON_VID | |
1813 | help | |
1814 | If you say yes here you get support for the hardware | |
1815 | monitoring functionality of the Winbond W83627EHF Super-I/O chip. | |
1816 | ||
1817 | This driver also supports the W83627EHG, which is the lead-free | |
1818 | version of the W83627EHF, and the W83627DHG, which is a similar | |
1819 | chip suited for specific Intel processors that use PECI such as | |
1820 | the Core 2 Duo. And also the W83627UHG, which is a stripped down | |
1821 | version of the W83627DHG (as far as hardware monitoring goes.) | |
1822 | ||
1823 | This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F | |
1824 | (also known as W83667HG-I), and NCT6776F. | |
1825 | ||
1826 | This driver can also be built as a module. If so, the module | |
1827 | will be called w83627ehf. | |
1828 | ||
1829 | config SENSORS_WM831X | |
1830 | tristate "WM831x PMICs" | |
1831 | depends on MFD_WM831X | |
1832 | help | |
1833 | If you say yes here you get support for the hardware | |
1834 | monitoring functionality of the Wolfson Microelectronics | |
1835 | WM831x series of PMICs. | |
1836 | ||
1837 | This driver can also be built as a module. If so, the module | |
1838 | will be called wm831x-hwmon. | |
1839 | ||
1840 | config SENSORS_WM8350 | |
1841 | tristate "Wolfson Microelectronics WM835x" | |
1842 | depends on MFD_WM8350 | |
1843 | help | |
1844 | If you say yes here you get support for the hardware | |
1845 | monitoring features of the WM835x series of PMICs. | |
1846 | ||
1847 | This driver can also be built as a module. If so, the module | |
1848 | will be called wm8350-hwmon. | |
1849 | ||
1850 | config SENSORS_ULTRA45 | |
1851 | tristate "Sun Ultra45 PIC16F747" | |
1852 | depends on SPARC64 | |
1853 | help | |
1854 | This driver provides support for the Ultra45 workstation environmental | |
1855 | sensors. | |
1856 | ||
1857 | config SENSORS_XGENE | |
1858 | tristate "APM X-Gene SoC hardware monitoring driver" | |
1859 | depends on XGENE_SLIMPRO_MBOX || PCC | |
1860 | help | |
1861 | If you say yes here you get support for the temperature | |
1862 | and power sensors for APM X-Gene SoC. | |
1863 | ||
1864 | if ACPI | |
1865 | ||
1866 | comment "ACPI drivers" | |
1867 | ||
1868 | config SENSORS_ACPI_POWER | |
1869 | tristate "ACPI 4.0 power meter" | |
1870 | help | |
1871 | This driver exposes ACPI 4.0 power meters as hardware monitoring | |
1872 | devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware | |
1873 | and a power meter. | |
1874 | ||
1875 | To compile this driver as a module, choose M here: | |
1876 | the module will be called acpi_power_meter. | |
1877 | ||
1878 | config SENSORS_ATK0110 | |
1879 | tristate "ASUS ATK0110" | |
1880 | depends on X86 | |
1881 | help | |
1882 | If you say yes here you get support for the ACPI hardware | |
1883 | monitoring interface found in many ASUS motherboards. This | |
1884 | driver will provide readings of fans, voltages and temperatures | |
1885 | through the system firmware. | |
1886 | ||
1887 | This driver can also be built as a module. If so, the module | |
1888 | will be called asus_atk0110. | |
1889 | ||
1890 | endif # ACPI | |
1891 | ||
1892 | endif # HWMON |