]>
Commit | Line | Data |
---|---|---|
1 | menuconfig REGULATOR | |
2 | bool "Voltage and Current Regulator Support" | |
3 | help | |
4 | Generic Voltage and Current Regulator support. | |
5 | ||
6 | This framework is designed to provide a generic interface to voltage | |
7 | and current regulators within the Linux kernel. It's intended to | |
8 | provide voltage and current control to client or consumer drivers and | |
9 | also provide status information to user space applications through a | |
10 | sysfs interface. | |
11 | ||
12 | The intention is to allow systems to dynamically control regulator | |
13 | output in order to save power and prolong battery life. This applies | |
14 | to both voltage regulators (where voltage output is controllable) and | |
15 | current sinks (where current output is controllable). | |
16 | ||
17 | This framework safely compiles out if not selected so that client | |
18 | drivers can still be used in systems with no software controllable | |
19 | regulators. | |
20 | ||
21 | If unsure, say no. | |
22 | ||
23 | ||
24 | if REGULATOR | |
25 | ||
26 | config REGULATOR_DEBUG | |
27 | bool "Regulator debug support" | |
28 | help | |
29 | Say yes here to enable debugging support. | |
30 | ||
31 | config REGULATOR_FIXED_VOLTAGE | |
32 | tristate "Fixed voltage regulator support" | |
33 | help | |
34 | This driver provides support for fixed voltage regulators, | |
35 | useful for systems which use a combination of software | |
36 | managed regulators and simple non-configurable regulators. | |
37 | ||
38 | config REGULATOR_VIRTUAL_CONSUMER | |
39 | tristate "Virtual regulator consumer support" | |
40 | help | |
41 | This driver provides a virtual consumer for the voltage and | |
42 | current regulator API which provides sysfs controls for | |
43 | configuring the supplies requested. This is mainly useful | |
44 | for test purposes. | |
45 | ||
46 | If unsure, say no. | |
47 | ||
48 | config REGULATOR_USERSPACE_CONSUMER | |
49 | tristate "Userspace regulator consumer support" | |
50 | help | |
51 | There are some classes of devices that are controlled entirely | |
52 | from user space. Userspace consumer driver provides ability to | |
53 | control power supplies for such devices. | |
54 | ||
55 | If unsure, say no. | |
56 | ||
57 | config REGULATOR_88PM800 | |
58 | tristate "Marvell 88PM800 Power regulators" | |
59 | depends on MFD_88PM800 | |
60 | help | |
61 | This driver supports Marvell 88PM800 voltage regulator chips. | |
62 | It delivers digitally programmable output, | |
63 | the voltage is programmed via I2C interface. | |
64 | It's suitable to support PXA988 chips to control VCC_MAIN and | |
65 | various voltages. | |
66 | ||
67 | config REGULATOR_88PM8607 | |
68 | tristate "Marvell 88PM8607 Power regulators" | |
69 | depends on MFD_88PM860X=y | |
70 | help | |
71 | This driver supports 88PM8607 voltage regulator chips. | |
72 | ||
73 | config REGULATOR_ACT8865 | |
74 | tristate "Active-semi act8865 voltage regulator" | |
75 | depends on I2C | |
76 | select REGMAP_I2C | |
77 | help | |
78 | This driver controls a active-semi act8865 voltage output | |
79 | regulator via I2C bus. | |
80 | ||
81 | config REGULATOR_ACT8945A | |
82 | tristate "Active-semi ACT8945A voltage regulator" | |
83 | depends on MFD_ACT8945A | |
84 | help | |
85 | This driver controls a active-semi ACT8945A voltage regulator | |
86 | via I2C bus. The ACT8945A features three step-down DC/DC converters | |
87 | and four low-dropout linear regulators, along with a ActivePath | |
88 | battery charger. | |
89 | ||
90 | config REGULATOR_AD5398 | |
91 | tristate "Analog Devices AD5398/AD5821 regulators" | |
92 | depends on I2C | |
93 | help | |
94 | This driver supports AD5398 and AD5821 current regulator chips. | |
95 | If building into module, its name is ad5398.ko. | |
96 | ||
97 | config REGULATOR_ANATOP | |
98 | tristate "Freescale i.MX on-chip ANATOP LDO regulators" | |
99 | depends on MFD_SYSCON | |
100 | help | |
101 | Say y here to support Freescale i.MX on-chip ANATOP LDOs | |
102 | regulators. It is recommended that this option be | |
103 | enabled on i.MX6 platform. | |
104 | ||
105 | config REGULATOR_AAT2870 | |
106 | tristate "AnalogicTech AAT2870 Regulators" | |
107 | depends on MFD_AAT2870_CORE | |
108 | help | |
109 | If you have a AnalogicTech AAT2870 say Y to enable the | |
110 | regulator driver. | |
111 | ||
112 | config REGULATOR_AB3100 | |
113 | tristate "ST-Ericsson AB3100 Regulator functions" | |
114 | depends on AB3100_CORE | |
115 | default y if AB3100_CORE | |
116 | help | |
117 | These regulators correspond to functionality in the | |
118 | AB3100 analog baseband dealing with power regulators | |
119 | for the system. | |
120 | ||
121 | config REGULATOR_AB8500 | |
122 | bool "ST-Ericsson AB8500 Power Regulators" | |
123 | depends on AB8500_CORE | |
124 | help | |
125 | This driver supports the regulators found on the ST-Ericsson mixed | |
126 | signal AB8500 PMIC | |
127 | ||
128 | config REGULATOR_ARIZONA | |
129 | tristate "Wolfson Arizona class devices" | |
130 | depends on MFD_ARIZONA | |
131 | depends on SND_SOC | |
132 | help | |
133 | Support for the regulators found on Wolfson Arizona class | |
134 | devices. | |
135 | ||
136 | config REGULATOR_AS3711 | |
137 | tristate "AS3711 PMIC" | |
138 | depends on MFD_AS3711 | |
139 | help | |
140 | This driver provides support for the voltage regulators on the | |
141 | AS3711 PMIC | |
142 | ||
143 | config REGULATOR_AS3722 | |
144 | tristate "AMS AS3722 PMIC Regulators" | |
145 | depends on MFD_AS3722 | |
146 | help | |
147 | This driver provides support for the voltage regulators on the | |
148 | AS3722 PMIC. This will enable support for all the software | |
149 | controllable DCDC/LDO regulators. | |
150 | ||
151 | config REGULATOR_AXP20X | |
152 | tristate "X-POWERS AXP20X PMIC Regulators" | |
153 | depends on MFD_AXP20X | |
154 | help | |
155 | This driver provides support for the voltage regulators on the | |
156 | AXP20X PMIC. | |
157 | ||
158 | config REGULATOR_BCM590XX | |
159 | tristate "Broadcom BCM590xx PMU Regulators" | |
160 | depends on MFD_BCM590XX | |
161 | help | |
162 | This driver provides support for the voltage regulators on the | |
163 | BCM590xx PMUs. This will enable support for the software | |
164 | controllable LDO/Switching regulators. | |
165 | ||
166 | config REGULATOR_DA903X | |
167 | tristate "Dialog Semiconductor DA9030/DA9034 regulators" | |
168 | depends on PMIC_DA903X | |
169 | help | |
170 | Say y here to support the BUCKs and LDOs regulators found on | |
171 | Dialog Semiconductor DA9030/DA9034 PMIC. | |
172 | ||
173 | config REGULATOR_DA9052 | |
174 | tristate "Dialog Semiconductor DA9052/DA9053 regulators" | |
175 | depends on PMIC_DA9052 | |
176 | help | |
177 | This driver supports the voltage regulators of DA9052-BC and | |
178 | DA9053-AA/Bx PMIC. | |
179 | ||
180 | config REGULATOR_DA9055 | |
181 | tristate "Dialog Semiconductor DA9055 regulators" | |
182 | depends on MFD_DA9055 | |
183 | help | |
184 | Say y here to support the BUCKs and LDOs regulators found on | |
185 | Dialog Semiconductor DA9055 PMIC. | |
186 | ||
187 | This driver can also be built as a module. If so, the module | |
188 | will be called da9055-regulator. | |
189 | ||
190 | config REGULATOR_DA9062 | |
191 | tristate "Dialog Semiconductor DA9062 regulators" | |
192 | depends on MFD_DA9062 | |
193 | help | |
194 | Say y here to support the BUCKs and LDOs regulators found on | |
195 | DA9062 PMICs. | |
196 | ||
197 | This driver can also be built as a module. If so, the module | |
198 | will be called da9062-regulator. | |
199 | ||
200 | config REGULATOR_DA9063 | |
201 | tristate "Dialog Semiconductor DA9063 regulators" | |
202 | depends on MFD_DA9063 | |
203 | help | |
204 | Say y here to support the BUCKs and LDOs regulators found on | |
205 | DA9063 PMICs. | |
206 | ||
207 | This driver can also be built as a module. If so, the module | |
208 | will be called da9063-regulator. | |
209 | ||
210 | config REGULATOR_DA9210 | |
211 | tristate "Dialog Semiconductor DA9210 regulator" | |
212 | depends on I2C | |
213 | select REGMAP_I2C | |
214 | help | |
215 | Say y here to support for the Dialog Semiconductor DA9210. | |
216 | The DA9210 is a multi-phase synchronous step down | |
217 | converter 12A DC-DC Buck controlled through an I2C | |
218 | interface. | |
219 | ||
220 | config REGULATOR_DA9211 | |
221 | tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator" | |
222 | depends on I2C | |
223 | select REGMAP_I2C | |
224 | help | |
225 | Say y here to support for the Dialog Semiconductor DA9211/DA9212 | |
226 | /DA9213/DA9214/DA9215. | |
227 | The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous | |
228 | step down converter 12A or 16A DC-DC Buck controlled through an I2C | |
229 | interface. | |
230 | ||
231 | config REGULATOR_DBX500_PRCMU | |
232 | bool | |
233 | ||
234 | config REGULATOR_DB8500_PRCMU | |
235 | bool "ST-Ericsson DB8500 Voltage Domain Regulators" | |
236 | depends on MFD_DB8500_PRCMU | |
237 | select REGULATOR_DBX500_PRCMU | |
238 | help | |
239 | This driver supports the voltage domain regulators controlled by the | |
240 | DB8500 PRCMU | |
241 | ||
242 | config REGULATOR_FAN53555 | |
243 | tristate "Fairchild FAN53555 Regulator" | |
244 | depends on I2C | |
245 | select REGMAP_I2C | |
246 | help | |
247 | This driver supports Fairchild FAN53555 Digitally Programmable | |
248 | TinyBuck Regulator. The FAN53555 is a step-down switching voltage | |
249 | regulator that delivers a digitally programmable output from an | |
250 | input voltage supply of 2.5V to 5.5V. The output voltage is | |
251 | programmed through an I2C interface. | |
252 | ||
253 | config REGULATOR_GPIO | |
254 | tristate "GPIO regulator support" | |
255 | depends on GPIOLIB || COMPILE_TEST | |
256 | help | |
257 | This driver provides support for regulators that can be | |
258 | controlled via gpios. | |
259 | It is capable of supporting current and voltage regulators | |
260 | and the platform has to provide a mapping of GPIO-states | |
261 | to target volts/amps. | |
262 | ||
263 | config REGULATOR_HI6421 | |
264 | tristate "HiSilicon Hi6421 PMIC voltage regulator support" | |
265 | depends on MFD_HI6421_PMIC && OF | |
266 | help | |
267 | This driver provides support for the voltage regulators on the | |
268 | HiSilicon Hi6421 PMU / Codec IC. | |
269 | Hi6421 is a multi-function device which, on regulator part, provides | |
270 | 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All | |
271 | of them come with support to either ECO (idle) or sleep mode. | |
272 | ||
273 | config REGULATOR_HI655X | |
274 | tristate "Hisilicon HI655X PMIC regulators support" | |
275 | depends on ARCH_HISI || COMPILE_TEST | |
276 | depends on MFD_HI655X_PMIC && OF | |
277 | help | |
278 | This driver provides support for the voltage regulators of the | |
279 | Hisilicon Hi655x PMIC device. | |
280 | ||
281 | config REGULATOR_ISL9305 | |
282 | tristate "Intersil ISL9305 regulator" | |
283 | depends on I2C | |
284 | select REGMAP_I2C | |
285 | help | |
286 | This driver supports ISL9305 voltage regulator chip. | |
287 | ||
288 | config REGULATOR_ISL6271A | |
289 | tristate "Intersil ISL6271A Power regulator" | |
290 | depends on I2C | |
291 | help | |
292 | This driver supports ISL6271A voltage regulator chip. | |
293 | ||
294 | config REGULATOR_LM363X | |
295 | tristate "TI LM363X voltage regulators" | |
296 | depends on MFD_TI_LMU | |
297 | help | |
298 | This driver supports LM3631 and LM3632 voltage regulators for | |
299 | the LCD bias. | |
300 | One boost output voltage is configurable and always on. | |
301 | Other LDOs are used for the display module. | |
302 | ||
303 | config REGULATOR_LP3971 | |
304 | tristate "National Semiconductors LP3971 PMIC regulator driver" | |
305 | depends on I2C | |
306 | help | |
307 | Say Y here to support the voltage regulators and convertors | |
308 | on National Semiconductors LP3971 PMIC | |
309 | ||
310 | config REGULATOR_LP3972 | |
311 | tristate "National Semiconductors LP3972 PMIC regulator driver" | |
312 | depends on I2C | |
313 | help | |
314 | Say Y here to support the voltage regulators and convertors | |
315 | on National Semiconductors LP3972 PMIC | |
316 | ||
317 | config REGULATOR_LP872X | |
318 | tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" | |
319 | depends on I2C | |
320 | select REGMAP_I2C | |
321 | help | |
322 | This driver supports LP8720/LP8725 PMIC | |
323 | ||
324 | config REGULATOR_LP873X | |
325 | tristate "TI LP873X Power regulators" | |
326 | depends on MFD_TI_LP873X && OF | |
327 | help | |
328 | This driver supports LP873X voltage regulator chips. LP873X | |
329 | provides two step-down converters and two general-purpose LDO | |
330 | voltage regulators. It supports software based voltage control | |
331 | for different voltage domains | |
332 | ||
333 | config REGULATOR_LP8755 | |
334 | tristate "TI LP8755 High Performance PMU driver" | |
335 | depends on I2C | |
336 | select REGMAP_I2C | |
337 | help | |
338 | This driver supports LP8755 High Performance PMU driver. This | |
339 | chip contains six step-down DC/DC converters which can support | |
340 | 9 mode multiphase configuration. | |
341 | ||
342 | config REGULATOR_LP8788 | |
343 | tristate "TI LP8788 Power Regulators" | |
344 | depends on MFD_LP8788 | |
345 | help | |
346 | This driver supports LP8788 voltage regulator chip. | |
347 | ||
348 | config REGULATOR_LTC3589 | |
349 | tristate "LTC3589 8-output voltage regulator" | |
350 | depends on I2C | |
351 | select REGMAP_I2C | |
352 | help | |
353 | This enables support for the LTC3589, LTC3589-1, and LTC3589-2 | |
354 | 8-output regulators controlled via I2C. | |
355 | ||
356 | config REGULATOR_LTC3676 | |
357 | tristate "LTC3676 8-output voltage regulator" | |
358 | depends on I2C | |
359 | select REGMAP_I2C | |
360 | help | |
361 | This enables support for the LTC3676 | |
362 | 8-output regulators controlled via I2C. | |
363 | ||
364 | config REGULATOR_MAX14577 | |
365 | tristate "Maxim 14577/77836 regulator" | |
366 | depends on MFD_MAX14577 | |
367 | help | |
368 | This driver controls a Maxim MAX14577/77836 regulator via I2C bus. | |
369 | The MAX14577 regulators include safeout LDO and charger current | |
370 | regulator. The MAX77836 has two additional LDOs. | |
371 | ||
372 | config REGULATOR_MAX1586 | |
373 | tristate "Maxim 1586/1587 voltage regulator" | |
374 | depends on I2C | |
375 | help | |
376 | This driver controls a Maxim 1586 or 1587 voltage output | |
377 | regulator via I2C bus. The provided regulator is suitable | |
378 | for PXA27x chips to control VCC_CORE and VCC_USIM voltages. | |
379 | ||
380 | config REGULATOR_MAX77620 | |
381 | tristate "Maxim 77620/MAX20024 voltage regulator" | |
382 | depends on MFD_MAX77620 | |
383 | help | |
384 | This driver controls Maxim MAX77620 voltage output regulator | |
385 | via I2C bus. The provided regulator is suitable for Tegra | |
386 | chip to control Step-Down DC-DC and LDOs. Say Y here to | |
387 | enable the regulator driver. | |
388 | ||
389 | config REGULATOR_MAX8649 | |
390 | tristate "Maxim 8649 voltage regulator" | |
391 | depends on I2C | |
392 | select REGMAP_I2C | |
393 | help | |
394 | This driver controls a Maxim 8649 voltage output regulator via | |
395 | I2C bus. | |
396 | ||
397 | config REGULATOR_MAX8660 | |
398 | tristate "Maxim 8660/8661 voltage regulator" | |
399 | depends on I2C | |
400 | help | |
401 | This driver controls a Maxim 8660/8661 voltage output | |
402 | regulator via I2C bus. | |
403 | ||
404 | config REGULATOR_MAX8907 | |
405 | tristate "Maxim 8907 voltage regulator" | |
406 | depends on MFD_MAX8907 | |
407 | help | |
408 | This driver controls a Maxim 8907 voltage output regulator | |
409 | via I2C bus. The provided regulator is suitable for Tegra | |
410 | chip to control Step-Down DC-DC and LDOs. | |
411 | ||
412 | config REGULATOR_MAX8925 | |
413 | tristate "Maxim MAX8925 Power Management IC" | |
414 | depends on MFD_MAX8925 | |
415 | help | |
416 | Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. | |
417 | ||
418 | config REGULATOR_MAX8952 | |
419 | tristate "Maxim MAX8952 Power Management IC" | |
420 | depends on I2C | |
421 | help | |
422 | This driver controls a Maxim 8952 voltage output regulator | |
423 | via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS | |
424 | modes ranging from 0.77V to 1.40V by 0.01V steps. | |
425 | ||
426 | config REGULATOR_MAX8973 | |
427 | tristate "Maxim MAX8973 voltage regulator " | |
428 | depends on I2C | |
429 | depends on THERMAL && THERMAL_OF | |
430 | select REGMAP_I2C | |
431 | help | |
432 | The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down | |
433 | switching regulator delievers up to 9A of output current. Each | |
434 | phase operates at a 2MHz fixed frequency with a 120 deg shift | |
435 | from the adjacent phase, allowing the use of small magnetic component. | |
436 | ||
437 | config REGULATOR_MAX8997 | |
438 | tristate "Maxim 8997/8966 regulator" | |
439 | depends on MFD_MAX8997 | |
440 | help | |
441 | This driver controls a Maxim 8997/8966 regulator | |
442 | via I2C bus. The provided regulator is suitable for S5PC110, | |
443 | S5PV210, and Exynos-4 chips to control VCC_CORE and | |
444 | VCC_USIM voltages. | |
445 | ||
446 | config REGULATOR_MAX8998 | |
447 | tristate "Maxim 8998 voltage regulator" | |
448 | depends on MFD_MAX8998 | |
449 | help | |
450 | This driver controls a Maxim 8998 voltage output regulator | |
451 | via I2C bus. The provided regulator is suitable for S3C6410 | |
452 | and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. | |
453 | ||
454 | config REGULATOR_MAX77686 | |
455 | tristate "Maxim 77686 regulator" | |
456 | depends on MFD_MAX77686 | |
457 | help | |
458 | This driver controls a Maxim 77686 regulator | |
459 | via I2C bus. The provided regulator is suitable for | |
460 | Exynos-4 chips to control VARM and VINT voltages. | |
461 | ||
462 | config REGULATOR_MAX77693 | |
463 | tristate "Maxim 77693/77843 regulator" | |
464 | depends on (MFD_MAX77693 || MFD_MAX77843) | |
465 | help | |
466 | This driver controls a Maxim 77693/77843 regulators via I2C bus. | |
467 | The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' | |
468 | and one current regulator 'CHARGER'. This is suitable for | |
469 | Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. | |
470 | ||
471 | config REGULATOR_MAX77802 | |
472 | tristate "Maxim 77802 regulator" | |
473 | depends on MFD_MAX77686 | |
474 | help | |
475 | This driver controls a Maxim 77802 regulator | |
476 | via I2C bus. The provided regulator is suitable for | |
477 | Exynos5420/Exynos5800 SoCs to control various voltages. | |
478 | It includes support for control of voltage and ramp speed. | |
479 | ||
480 | config REGULATOR_MC13XXX_CORE | |
481 | tristate | |
482 | ||
483 | config REGULATOR_MC13783 | |
484 | tristate "Freescale MC13783 regulator driver" | |
485 | depends on MFD_MC13XXX | |
486 | select REGULATOR_MC13XXX_CORE | |
487 | help | |
488 | Say y here to support the regulators found on the Freescale MC13783 | |
489 | PMIC. | |
490 | ||
491 | config REGULATOR_MC13892 | |
492 | tristate "Freescale MC13892 regulator driver" | |
493 | depends on MFD_MC13XXX | |
494 | select REGULATOR_MC13XXX_CORE | |
495 | help | |
496 | Say y here to support the regulators found on the Freescale MC13892 | |
497 | PMIC. | |
498 | ||
499 | config REGULATOR_MT6311 | |
500 | tristate "MediaTek MT6311 PMIC" | |
501 | depends on I2C | |
502 | select REGMAP_I2C | |
503 | help | |
504 | Say y here to select this option to enable the power regulator of | |
505 | MediaTek MT6311 PMIC. | |
506 | This driver supports the control of different power rails of device | |
507 | through regulator interface. | |
508 | ||
509 | config REGULATOR_MT6323 | |
510 | tristate "MediaTek MT6323 PMIC" | |
511 | depends on MFD_MT6397 | |
512 | help | |
513 | Say y here to select this option to enable the power regulator of | |
514 | MediaTek MT6323 PMIC. | |
515 | This driver supports the control of different power rails of device | |
516 | through regulator interface. | |
517 | ||
518 | config REGULATOR_MT6397 | |
519 | tristate "MediaTek MT6397 PMIC" | |
520 | depends on MFD_MT6397 | |
521 | help | |
522 | Say y here to select this option to enable the power regulator of | |
523 | MediaTek MT6397 PMIC. | |
524 | This driver supports the control of different power rails of device | |
525 | through regulator interface. | |
526 | ||
527 | config REGULATOR_PALMAS | |
528 | tristate "TI Palmas PMIC Regulators" | |
529 | depends on MFD_PALMAS | |
530 | help | |
531 | If you wish to control the regulators on the Palmas series of | |
532 | chips say Y here. This will enable support for all the software | |
533 | controllable SMPS/LDO regulators. | |
534 | ||
535 | The regulators available on Palmas series chips vary depending | |
536 | on the muxing. This is handled automatically in the driver by | |
537 | reading the mux info from OTP. | |
538 | ||
539 | config REGULATOR_PBIAS | |
540 | tristate "PBIAS OMAP regulator driver" | |
541 | depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON | |
542 | help | |
543 | Say y here to support pbias regulator for mmc1:SD card i/o | |
544 | on OMAP SoCs. | |
545 | This driver provides support for OMAP pbias modelled | |
546 | regulators. | |
547 | ||
548 | config REGULATOR_PCAP | |
549 | tristate "Motorola PCAP2 regulator driver" | |
550 | depends on EZX_PCAP | |
551 | help | |
552 | This driver provides support for the voltage regulators of the | |
553 | PCAP2 PMIC. | |
554 | ||
555 | config REGULATOR_PCF50633 | |
556 | tristate "NXP PCF50633 regulator driver" | |
557 | depends on MFD_PCF50633 | |
558 | help | |
559 | Say Y here to support the voltage regulators and convertors | |
560 | on PCF50633 | |
561 | ||
562 | config REGULATOR_PFUZE100 | |
563 | tristate "Freescale PFUZE100/200/3000 regulator driver" | |
564 | depends on I2C | |
565 | select REGMAP_I2C | |
566 | help | |
567 | Say y here to support the regulators found on the Freescale | |
568 | PFUZE100/200/3000 PMIC. | |
569 | ||
570 | config REGULATOR_PV88060 | |
571 | tristate "Powerventure Semiconductor PV88060 regulator" | |
572 | depends on I2C | |
573 | select REGMAP_I2C | |
574 | help | |
575 | Say y here to support the voltage regulators and convertors | |
576 | PV88060 | |
577 | ||
578 | config REGULATOR_PV88080 | |
579 | tristate "Powerventure Semiconductor PV88080 regulator" | |
580 | depends on I2C | |
581 | select REGMAP_I2C | |
582 | help | |
583 | Say y here to support the buck convertors on PV88080 | |
584 | ||
585 | config REGULATOR_PV88090 | |
586 | tristate "Powerventure Semiconductor PV88090 regulator" | |
587 | depends on I2C | |
588 | select REGMAP_I2C | |
589 | help | |
590 | Say y here to support the voltage regulators and convertors | |
591 | on PV88090 | |
592 | ||
593 | config REGULATOR_PWM | |
594 | tristate "PWM voltage regulator" | |
595 | depends on PWM | |
596 | help | |
597 | This driver supports PWM controlled voltage regulators. PWM | |
598 | duty cycle can increase or decrease the voltage. | |
599 | ||
600 | config REGULATOR_QCOM_RPM | |
601 | tristate "Qualcomm RPM regulator driver" | |
602 | depends on MFD_QCOM_RPM | |
603 | help | |
604 | If you say yes to this option, support will be included for the | |
605 | regulators exposed by the Resource Power Manager found in Qualcomm | |
606 | 8660, 8960 and 8064 based devices. | |
607 | ||
608 | Say M here if you want to include support for the regulators on the | |
609 | Qualcomm RPM as a module. The module will be named | |
610 | "qcom_rpm-regulator". | |
611 | ||
612 | config REGULATOR_QCOM_SMD_RPM | |
613 | tristate "Qualcomm SMD based RPM regulator driver" | |
614 | depends on QCOM_SMD_RPM | |
615 | help | |
616 | If you say yes to this option, support will be included for the | |
617 | regulators exposed by the Resource Power Manager found in Qualcomm | |
618 | 8974 based devices. | |
619 | ||
620 | Say M here if you want to include support for the regulators on the | |
621 | Qualcomm RPM as a module. The module will be named | |
622 | "qcom_smd-regulator". | |
623 | ||
624 | config REGULATOR_QCOM_SPMI | |
625 | tristate "Qualcomm SPMI regulator driver" | |
626 | depends on SPMI || COMPILE_TEST | |
627 | help | |
628 | If you say yes to this option, support will be included for the | |
629 | regulators found in Qualcomm SPMI PMICs. | |
630 | ||
631 | Say M here if you want to include support for the regulators on the | |
632 | Qualcomm SPMI PMICs as a module. The module will be named | |
633 | "qcom_spmi-regulator". | |
634 | ||
635 | config REGULATOR_RC5T583 | |
636 | tristate "RICOH RC5T583 Power regulators" | |
637 | depends on MFD_RC5T583 | |
638 | help | |
639 | Select this option to enable the power regulator of RICOH | |
640 | PMIC RC5T583. | |
641 | This driver supports the control of different power rails of device | |
642 | through regulator interface. The device supports multiple DCDC/LDO | |
643 | outputs which can be controlled by i2c communication. | |
644 | ||
645 | config REGULATOR_RK808 | |
646 | tristate "Rockchip RK808/RK818 Power regulators" | |
647 | depends on MFD_RK808 | |
648 | help | |
649 | Select this option to enable the power regulator of ROCKCHIP | |
650 | PMIC RK808 and RK818. | |
651 | This driver supports the control of different power rails of device | |
652 | through regulator interface. The device supports multiple DCDC/LDO | |
653 | outputs which can be controlled by i2c communication. | |
654 | ||
655 | config REGULATOR_RN5T618 | |
656 | tristate "Ricoh RN5T567/618 voltage regulators" | |
657 | depends on MFD_RN5T618 | |
658 | help | |
659 | Say y here to support the regulators found on Ricoh RN5T567 or | |
660 | RN5T618 PMIC. | |
661 | ||
662 | config REGULATOR_RT5033 | |
663 | tristate "Richtek RT5033 Regulators" | |
664 | depends on MFD_RT5033 | |
665 | help | |
666 | This adds support for voltage and current regulators in Richtek | |
667 | RT5033 PMIC. The device supports multiple regulators like | |
668 | current source, LDO and Buck. | |
669 | ||
670 | config REGULATOR_S2MPA01 | |
671 | tristate "Samsung S2MPA01 voltage regulator" | |
672 | depends on MFD_SEC_CORE | |
673 | help | |
674 | This driver controls Samsung S2MPA01 voltage output regulator | |
675 | via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. | |
676 | ||
677 | config REGULATOR_S2MPS11 | |
678 | tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" | |
679 | depends on MFD_SEC_CORE | |
680 | help | |
681 | This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage | |
682 | output regulator via I2C bus. The chip is comprised of high efficient | |
683 | Buck converters including Dual-Phase Buck converter, Buck-Boost | |
684 | converter, various LDOs. | |
685 | ||
686 | config REGULATOR_S5M8767 | |
687 | tristate "Samsung S5M8767A voltage regulator" | |
688 | depends on MFD_SEC_CORE | |
689 | help | |
690 | This driver supports a Samsung S5M8767A voltage output regulator | |
691 | via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and | |
692 | supports DVS mode with 8bits of output voltage control. | |
693 | ||
694 | config REGULATOR_SKY81452 | |
695 | tristate "Skyworks Solutions SKY81452 voltage regulator" | |
696 | depends on MFD_SKY81452 | |
697 | help | |
698 | This driver supports Skyworks SKY81452 voltage output regulator | |
699 | via I2C bus. SKY81452 has one voltage linear regulator can be | |
700 | programmed from 4.5V to 20V. | |
701 | ||
702 | This driver can also be built as a module. If so, the module | |
703 | will be called sky81452-regulator. | |
704 | ||
705 | config REGULATOR_TI_ABB | |
706 | tristate "TI Adaptive Body Bias on-chip LDO" | |
707 | depends on ARCH_OMAP | |
708 | help | |
709 | Select this option to support Texas Instruments' on-chip Adaptive Body | |
710 | Bias (ABB) LDO regulators. It is recommended that this option be | |
711 | enabled on required TI SoC. Certain Operating Performance Points | |
712 | on TI SoCs may be unstable without enabling this as it provides | |
713 | device specific optimized bias to allow/optimize functionality. | |
714 | ||
715 | config REGULATOR_STW481X_VMMC | |
716 | bool "ST Microelectronics STW481X VMMC regulator" | |
717 | depends on MFD_STW481X || COMPILE_TEST | |
718 | default y if MFD_STW481X | |
719 | help | |
720 | This driver supports the internal VMMC regulator in the STw481x | |
721 | PMIC chips. | |
722 | ||
723 | config REGULATOR_TPS51632 | |
724 | tristate "TI TPS51632 Power Regulator" | |
725 | depends on I2C | |
726 | select REGMAP_I2C | |
727 | help | |
728 | This driver supports TPS51632 voltage regulator chip. | |
729 | The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller | |
730 | with Serial VID control and DVFS. | |
731 | The voltage output can be configure through I2C interface or PWM | |
732 | interface. | |
733 | ||
734 | config REGULATOR_TPS6105X | |
735 | tristate "TI TPS6105X Power regulators" | |
736 | depends on TPS6105X | |
737 | default y if TPS6105X | |
738 | help | |
739 | This driver supports TPS61050/TPS61052 voltage regulator chips. | |
740 | It is a single boost converter primarily for white LEDs and | |
741 | audio amplifiers. | |
742 | ||
743 | config REGULATOR_TPS62360 | |
744 | tristate "TI TPS6236x Power Regulator" | |
745 | depends on I2C | |
746 | select REGMAP_I2C | |
747 | help | |
748 | This driver supports TPS6236x voltage regulator chip. This | |
749 | regulator is meant for processor core supply. This chip is | |
750 | high-frequency synchronous step down dc-dc converter optimized | |
751 | for battery-powered portable applications. | |
752 | ||
753 | config REGULATOR_TPS65023 | |
754 | tristate "TI TPS65023 Power regulators" | |
755 | depends on I2C | |
756 | select REGMAP_I2C | |
757 | help | |
758 | This driver supports TPS65023 voltage regulator chips. TPS65023 provides | |
759 | three step-down converters and two general-purpose LDO voltage regulators. | |
760 | It supports TI's software based Class-2 SmartReflex implementation. | |
761 | ||
762 | config REGULATOR_TPS6507X | |
763 | tristate "TI TPS6507X Power regulators" | |
764 | depends on I2C | |
765 | help | |
766 | This driver supports TPS6507X voltage regulator chips. TPS6507X provides | |
767 | three step-down converters and two general-purpose LDO voltage regulators. | |
768 | It supports TI's software based Class-2 SmartReflex implementation. | |
769 | ||
770 | config REGULATOR_TPS65086 | |
771 | tristate "TI TPS65086 Power regulators" | |
772 | depends on MFD_TPS65086 | |
773 | help | |
774 | This driver provides support for the voltage regulators on | |
775 | TI TPS65086 PMICs. | |
776 | ||
777 | config REGULATOR_TPS65090 | |
778 | tristate "TI TPS65090 Power regulator" | |
779 | depends on MFD_TPS65090 | |
780 | help | |
781 | This driver provides support for the voltage regulators on the | |
782 | TI TPS65090 PMIC. | |
783 | ||
784 | config REGULATOR_TPS65217 | |
785 | tristate "TI TPS65217 Power regulators" | |
786 | depends on MFD_TPS65217 | |
787 | help | |
788 | This driver supports TPS65217 voltage regulator chips. TPS65217 | |
789 | provides three step-down converters and four general-purpose LDO | |
790 | voltage regulators. It supports software based voltage control | |
791 | for different voltage domains | |
792 | ||
793 | config REGULATOR_TPS65218 | |
794 | tristate "TI TPS65218 Power regulators" | |
795 | depends on MFD_TPS65218 && OF | |
796 | help | |
797 | This driver supports TPS65218 voltage regulator chips. TPS65218 | |
798 | provides six step-down converters and one general-purpose LDO | |
799 | voltage regulators. It supports software based voltage control | |
800 | for different voltage domains | |
801 | ||
802 | config REGULATOR_TPS6524X | |
803 | tristate "TI TPS6524X Power regulators" | |
804 | depends on SPI | |
805 | help | |
806 | This driver supports TPS6524X voltage regulator chips. TPS6524X | |
807 | provides three step-down converters and two general-purpose LDO | |
808 | voltage regulators. This device is interfaced using a customized | |
809 | serial interface currently supported on the sequencer serial | |
810 | port controller. | |
811 | ||
812 | config REGULATOR_TPS6586X | |
813 | tristate "TI TPS6586X Power regulators" | |
814 | depends on MFD_TPS6586X | |
815 | help | |
816 | This driver supports TPS6586X voltage regulator chips. | |
817 | ||
818 | config REGULATOR_TPS65910 | |
819 | tristate "TI TPS65910/TPS65911 Power Regulators" | |
820 | depends on MFD_TPS65910 | |
821 | help | |
822 | This driver supports TPS65910/TPS65911 voltage regulator chips. | |
823 | ||
824 | config REGULATOR_TPS65912 | |
825 | tristate "TI TPS65912 Power regulator" | |
826 | depends on MFD_TPS65912 | |
827 | help | |
828 | This driver supports TPS65912 voltage regulator chip. | |
829 | ||
830 | config REGULATOR_TPS80031 | |
831 | tristate "TI TPS80031/TPS80032 power regulator driver" | |
832 | depends on MFD_TPS80031 | |
833 | help | |
834 | TPS80031/ TPS80032 Fully Integrated Power Management with Power | |
835 | Path and Battery Charger. It has 5 configurable step-down | |
836 | converters, 11 general purpose LDOs, VBUS generator and digital | |
837 | output to control regulators. | |
838 | ||
839 | config REGULATOR_TWL4030 | |
840 | tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" | |
841 | depends on TWL4030_CORE | |
842 | help | |
843 | This driver supports the voltage regulators provided by | |
844 | this family of companion chips. | |
845 | ||
846 | config REGULATOR_VEXPRESS | |
847 | tristate "Versatile Express regulators" | |
848 | depends on VEXPRESS_CONFIG | |
849 | help | |
850 | This driver provides support for voltage regulators available | |
851 | on the ARM Ltd's Versatile Express platform. | |
852 | ||
853 | config REGULATOR_WM831X | |
854 | tristate "Wolfson Microelectronics WM831x PMIC regulators" | |
855 | depends on MFD_WM831X | |
856 | help | |
857 | Support the voltage and current regulators of the WM831x series | |
858 | of PMIC devices. | |
859 | ||
860 | config REGULATOR_WM8350 | |
861 | tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" | |
862 | depends on MFD_WM8350 | |
863 | help | |
864 | This driver provides support for the voltage and current regulators | |
865 | of the WM8350 AudioPlus PMIC. | |
866 | ||
867 | config REGULATOR_WM8400 | |
868 | tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" | |
869 | depends on MFD_WM8400 | |
870 | help | |
871 | This driver provides support for the voltage regulators of the | |
872 | WM8400 AudioPlus PMIC. | |
873 | ||
874 | config REGULATOR_WM8994 | |
875 | tristate "Wolfson Microelectronics WM8994 CODEC" | |
876 | depends on MFD_WM8994 | |
877 | help | |
878 | This driver provides support for the voltage regulators on the | |
879 | WM8994 CODEC. | |
880 | ||
881 | endif | |
882 |