]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * OHCI HCD (Host Controller Driver) for USB. | |
3 | * | |
4 | * TI DA8xx (OMAP-L1x) Bus Glue | |
5 | * | |
6 | * Derived from: ohci-omap.c and ohci-s3c2410.c | |
7 | * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com> | |
8 | * | |
9 | * This file is licensed under the terms of the GNU General Public License | |
10 | * version 2. This program is licensed "as is" without any warranty of any | |
11 | * kind, whether express or implied. | |
12 | */ | |
13 | ||
14 | #include <linux/clk.h> | |
15 | #include <linux/io.h> | |
16 | #include <linux/interrupt.h> | |
17 | #include <linux/jiffies.h> | |
18 | #include <linux/kernel.h> | |
19 | #include <linux/module.h> | |
20 | #include <linux/platform_device.h> | |
21 | #include <linux/phy/phy.h> | |
22 | #include <linux/platform_data/usb-davinci.h> | |
23 | #include <linux/regulator/consumer.h> | |
24 | #include <linux/usb.h> | |
25 | #include <linux/usb/hcd.h> | |
26 | #include <asm/unaligned.h> | |
27 | ||
28 | #include "ohci.h" | |
29 | ||
30 | #define DRIVER_DESC "DA8XX" | |
31 | #define DRV_NAME "ohci-da8xx" | |
32 | ||
33 | static struct hc_driver __read_mostly ohci_da8xx_hc_driver; | |
34 | ||
35 | static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, | |
36 | u16 wValue, u16 wIndex, char *buf, u16 wLength); | |
37 | static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); | |
38 | ||
39 | struct da8xx_ohci_hcd { | |
40 | struct usb_hcd *hcd; | |
41 | struct clk *usb11_clk; | |
42 | struct phy *usb11_phy; | |
43 | struct regulator *vbus_reg; | |
44 | struct notifier_block nb; | |
45 | unsigned int reg_enabled; | |
46 | }; | |
47 | ||
48 | #define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv) | |
49 | ||
50 | /* Over-current indicator change bitmask */ | |
51 | static volatile u16 ocic_mask; | |
52 | ||
53 | static int ohci_da8xx_enable(struct usb_hcd *hcd) | |
54 | { | |
55 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | |
56 | int ret; | |
57 | ||
58 | ret = clk_prepare_enable(da8xx_ohci->usb11_clk); | |
59 | if (ret) | |
60 | return ret; | |
61 | ||
62 | ret = phy_init(da8xx_ohci->usb11_phy); | |
63 | if (ret) | |
64 | goto err_phy_init; | |
65 | ||
66 | ret = phy_power_on(da8xx_ohci->usb11_phy); | |
67 | if (ret) | |
68 | goto err_phy_power_on; | |
69 | ||
70 | return 0; | |
71 | ||
72 | err_phy_power_on: | |
73 | phy_exit(da8xx_ohci->usb11_phy); | |
74 | err_phy_init: | |
75 | clk_disable_unprepare(da8xx_ohci->usb11_clk); | |
76 | ||
77 | return ret; | |
78 | } | |
79 | ||
80 | static void ohci_da8xx_disable(struct usb_hcd *hcd) | |
81 | { | |
82 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | |
83 | ||
84 | phy_power_off(da8xx_ohci->usb11_phy); | |
85 | phy_exit(da8xx_ohci->usb11_phy); | |
86 | clk_disable_unprepare(da8xx_ohci->usb11_clk); | |
87 | } | |
88 | ||
89 | static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on) | |
90 | { | |
91 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | |
92 | struct device *dev = hcd->self.controller; | |
93 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); | |
94 | int ret; | |
95 | ||
96 | if (hub && hub->set_power) | |
97 | return hub->set_power(1, on); | |
98 | ||
99 | if (!da8xx_ohci->vbus_reg) | |
100 | return 0; | |
101 | ||
102 | if (on && !da8xx_ohci->reg_enabled) { | |
103 | ret = regulator_enable(da8xx_ohci->vbus_reg); | |
104 | if (ret) { | |
105 | dev_err(dev, "Failed to enable regulator: %d\n", ret); | |
106 | return ret; | |
107 | } | |
108 | da8xx_ohci->reg_enabled = 1; | |
109 | ||
110 | } else if (!on && da8xx_ohci->reg_enabled) { | |
111 | ret = regulator_disable(da8xx_ohci->vbus_reg); | |
112 | if (ret) { | |
113 | dev_err(dev, "Failed to disable regulator: %d\n", ret); | |
114 | return ret; | |
115 | } | |
116 | da8xx_ohci->reg_enabled = 0; | |
117 | } | |
118 | ||
119 | return 0; | |
120 | } | |
121 | ||
122 | static int ohci_da8xx_get_power(struct usb_hcd *hcd) | |
123 | { | |
124 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | |
125 | struct device *dev = hcd->self.controller; | |
126 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); | |
127 | ||
128 | if (hub && hub->get_power) | |
129 | return hub->get_power(1); | |
130 | ||
131 | if (da8xx_ohci->vbus_reg) | |
132 | return regulator_is_enabled(da8xx_ohci->vbus_reg); | |
133 | ||
134 | return 1; | |
135 | } | |
136 | ||
137 | static int ohci_da8xx_get_oci(struct usb_hcd *hcd) | |
138 | { | |
139 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | |
140 | struct device *dev = hcd->self.controller; | |
141 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); | |
142 | unsigned int flags; | |
143 | int ret; | |
144 | ||
145 | if (hub && hub->get_oci) | |
146 | return hub->get_oci(1); | |
147 | ||
148 | if (!da8xx_ohci->vbus_reg) | |
149 | return 0; | |
150 | ||
151 | ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags); | |
152 | if (ret) | |
153 | return ret; | |
154 | ||
155 | if (flags & REGULATOR_ERROR_OVER_CURRENT) | |
156 | return 1; | |
157 | ||
158 | return 0; | |
159 | } | |
160 | ||
161 | static int ohci_da8xx_has_set_power(struct usb_hcd *hcd) | |
162 | { | |
163 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | |
164 | struct device *dev = hcd->self.controller; | |
165 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); | |
166 | ||
167 | if (hub && hub->set_power) | |
168 | return 1; | |
169 | ||
170 | if (da8xx_ohci->vbus_reg) | |
171 | return 1; | |
172 | ||
173 | return 0; | |
174 | } | |
175 | ||
176 | static int ohci_da8xx_has_oci(struct usb_hcd *hcd) | |
177 | { | |
178 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | |
179 | struct device *dev = hcd->self.controller; | |
180 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); | |
181 | ||
182 | if (hub && hub->get_oci) | |
183 | return 1; | |
184 | ||
185 | if (da8xx_ohci->vbus_reg) | |
186 | return 1; | |
187 | ||
188 | return 0; | |
189 | } | |
190 | ||
191 | static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd) | |
192 | { | |
193 | struct device *dev = hcd->self.controller; | |
194 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); | |
195 | ||
196 | if (hub && hub->potpgt) | |
197 | return 1; | |
198 | ||
199 | return 0; | |
200 | } | |
201 | ||
202 | /* | |
203 | * Handle the port over-current indicator change. | |
204 | */ | |
205 | static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub, | |
206 | unsigned port) | |
207 | { | |
208 | ocic_mask |= 1 << port; | |
209 | ||
210 | /* Once over-current is detected, the port needs to be powered down */ | |
211 | if (hub->get_oci(port) > 0) | |
212 | hub->set_power(port, 0); | |
213 | } | |
214 | ||
215 | static int ohci_da8xx_regulator_event(struct notifier_block *nb, | |
216 | unsigned long event, void *data) | |
217 | { | |
218 | struct da8xx_ohci_hcd *da8xx_ohci = | |
219 | container_of(nb, struct da8xx_ohci_hcd, nb); | |
220 | ||
221 | if (event & REGULATOR_EVENT_OVER_CURRENT) { | |
222 | ocic_mask |= 1 << 1; | |
223 | ohci_da8xx_set_power(da8xx_ohci->hcd, 0); | |
224 | } | |
225 | ||
226 | return 0; | |
227 | } | |
228 | ||
229 | static int ohci_da8xx_register_notify(struct usb_hcd *hcd) | |
230 | { | |
231 | struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | |
232 | struct device *dev = hcd->self.controller; | |
233 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); | |
234 | int ret = 0; | |
235 | ||
236 | if (hub && hub->ocic_notify) { | |
237 | ret = hub->ocic_notify(ohci_da8xx_ocic_handler); | |
238 | } else if (da8xx_ohci->vbus_reg) { | |
239 | da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event; | |
240 | ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg, | |
241 | &da8xx_ohci->nb); | |
242 | } | |
243 | ||
244 | if (ret) | |
245 | dev_err(dev, "Failed to register notifier: %d\n", ret); | |
246 | ||
247 | return ret; | |
248 | } | |
249 | ||
250 | static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd) | |
251 | { | |
252 | struct device *dev = hcd->self.controller; | |
253 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); | |
254 | ||
255 | if (hub && hub->ocic_notify) | |
256 | hub->ocic_notify(NULL); | |
257 | } | |
258 | ||
259 | static int ohci_da8xx_reset(struct usb_hcd *hcd) | |
260 | { | |
261 | struct device *dev = hcd->self.controller; | |
262 | struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); | |
263 | struct ohci_hcd *ohci = hcd_to_ohci(hcd); | |
264 | int result; | |
265 | u32 rh_a; | |
266 | ||
267 | dev_dbg(dev, "starting USB controller\n"); | |
268 | ||
269 | result = ohci_da8xx_enable(hcd); | |
270 | if (result < 0) | |
271 | return result; | |
272 | ||
273 | /* | |
274 | * DA8xx only have 1 port connected to the pins but the HC root hub | |
275 | * register A reports 2 ports, thus we'll have to override it... | |
276 | */ | |
277 | ohci->num_ports = 1; | |
278 | ||
279 | result = ohci_setup(hcd); | |
280 | if (result < 0) { | |
281 | ohci_da8xx_disable(hcd); | |
282 | return result; | |
283 | } | |
284 | ||
285 | /* | |
286 | * Since we're providing a board-specific root hub port power control | |
287 | * and over-current reporting, we have to override the HC root hub A | |
288 | * register's default value, so that ohci_hub_control() could return | |
289 | * the correct hub descriptor... | |
290 | */ | |
291 | rh_a = ohci_readl(ohci, &ohci->regs->roothub.a); | |
292 | if (ohci_da8xx_has_set_power(hcd)) { | |
293 | rh_a &= ~RH_A_NPS; | |
294 | rh_a |= RH_A_PSM; | |
295 | } | |
296 | if (ohci_da8xx_has_oci(hcd)) { | |
297 | rh_a &= ~RH_A_NOCP; | |
298 | rh_a |= RH_A_OCPM; | |
299 | } | |
300 | if (ohci_da8xx_has_potpgt(hcd)) { | |
301 | rh_a &= ~RH_A_POTPGT; | |
302 | rh_a |= hub->potpgt << 24; | |
303 | } | |
304 | ohci_writel(ohci, rh_a, &ohci->regs->roothub.a); | |
305 | ||
306 | return result; | |
307 | } | |
308 | ||
309 | /* | |
310 | * Update the status data from the hub with the over-current indicator change. | |
311 | */ | |
312 | static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf) | |
313 | { | |
314 | int length = orig_ohci_hub_status_data(hcd, buf); | |
315 | ||
316 | /* See if we have OCIC bit set on port 1 */ | |
317 | if (ocic_mask & (1 << 1)) { | |
318 | dev_dbg(hcd->self.controller, "over-current indicator change " | |
319 | "on port 1\n"); | |
320 | ||
321 | if (!length) | |
322 | length = 1; | |
323 | ||
324 | buf[0] |= 1 << 1; | |
325 | } | |
326 | return length; | |
327 | } | |
328 | ||
329 | /* | |
330 | * Look at the control requests to the root hub and see if we need to override. | |
331 | */ | |
332 | static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, | |
333 | u16 wIndex, char *buf, u16 wLength) | |
334 | { | |
335 | struct device *dev = hcd->self.controller; | |
336 | int temp; | |
337 | ||
338 | switch (typeReq) { | |
339 | case GetPortStatus: | |
340 | /* Check the port number */ | |
341 | if (wIndex != 1) | |
342 | break; | |
343 | ||
344 | dev_dbg(dev, "GetPortStatus(%u)\n", wIndex); | |
345 | ||
346 | temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1); | |
347 | ||
348 | /* The port power status (PPS) bit defaults to 1 */ | |
349 | if (!ohci_da8xx_get_power(hcd)) | |
350 | temp &= ~RH_PS_PPS; | |
351 | ||
352 | /* The port over-current indicator (POCI) bit is always 0 */ | |
353 | if (ohci_da8xx_get_oci(hcd) > 0) | |
354 | temp |= RH_PS_POCI; | |
355 | ||
356 | /* The over-current indicator change (OCIC) bit is 0 too */ | |
357 | if (ocic_mask & (1 << wIndex)) | |
358 | temp |= RH_PS_OCIC; | |
359 | ||
360 | put_unaligned(cpu_to_le32(temp), (__le32 *)buf); | |
361 | return 0; | |
362 | case SetPortFeature: | |
363 | temp = 1; | |
364 | goto check_port; | |
365 | case ClearPortFeature: | |
366 | temp = 0; | |
367 | ||
368 | check_port: | |
369 | /* Check the port number */ | |
370 | if (wIndex != 1) | |
371 | break; | |
372 | ||
373 | switch (wValue) { | |
374 | case USB_PORT_FEAT_POWER: | |
375 | dev_dbg(dev, "%sPortFeature(%u): %s\n", | |
376 | temp ? "Set" : "Clear", wIndex, "POWER"); | |
377 | ||
378 | return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0; | |
379 | case USB_PORT_FEAT_C_OVER_CURRENT: | |
380 | dev_dbg(dev, "%sPortFeature(%u): %s\n", | |
381 | temp ? "Set" : "Clear", wIndex, | |
382 | "C_OVER_CURRENT"); | |
383 | ||
384 | if (temp) | |
385 | ocic_mask |= 1 << wIndex; | |
386 | else | |
387 | ocic_mask &= ~(1 << wIndex); | |
388 | return 0; | |
389 | } | |
390 | } | |
391 | ||
392 | return orig_ohci_hub_control(hcd, typeReq, wValue, | |
393 | wIndex, buf, wLength); | |
394 | } | |
395 | ||
396 | /*-------------------------------------------------------------------------*/ | |
397 | #ifdef CONFIG_OF | |
398 | static const struct of_device_id da8xx_ohci_ids[] = { | |
399 | { .compatible = "ti,da830-ohci" }, | |
400 | { } | |
401 | }; | |
402 | MODULE_DEVICE_TABLE(of, da8xx_ohci_ids); | |
403 | #endif | |
404 | ||
405 | static int ohci_da8xx_probe(struct platform_device *pdev) | |
406 | { | |
407 | struct da8xx_ohci_hcd *da8xx_ohci; | |
408 | struct usb_hcd *hcd; | |
409 | struct resource *mem; | |
410 | int error, irq; | |
411 | hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev, | |
412 | dev_name(&pdev->dev)); | |
413 | if (!hcd) | |
414 | return -ENOMEM; | |
415 | ||
416 | da8xx_ohci = to_da8xx_ohci(hcd); | |
417 | da8xx_ohci->hcd = hcd; | |
418 | ||
419 | da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, "usb11"); | |
420 | if (IS_ERR(da8xx_ohci->usb11_clk)) { | |
421 | error = PTR_ERR(da8xx_ohci->usb11_clk); | |
422 | if (error != -EPROBE_DEFER) | |
423 | dev_err(&pdev->dev, "Failed to get clock.\n"); | |
424 | goto err; | |
425 | } | |
426 | ||
427 | da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy"); | |
428 | if (IS_ERR(da8xx_ohci->usb11_phy)) { | |
429 | error = PTR_ERR(da8xx_ohci->usb11_phy); | |
430 | if (error != -EPROBE_DEFER) | |
431 | dev_err(&pdev->dev, "Failed to get phy.\n"); | |
432 | goto err; | |
433 | } | |
434 | ||
435 | da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus"); | |
436 | if (IS_ERR(da8xx_ohci->vbus_reg)) { | |
437 | error = PTR_ERR(da8xx_ohci->vbus_reg); | |
438 | if (error == -ENODEV) { | |
439 | da8xx_ohci->vbus_reg = NULL; | |
440 | } else if (error == -EPROBE_DEFER) { | |
441 | goto err; | |
442 | } else { | |
443 | dev_err(&pdev->dev, "Failed to get regulator\n"); | |
444 | goto err; | |
445 | } | |
446 | } | |
447 | ||
448 | mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
449 | hcd->regs = devm_ioremap_resource(&pdev->dev, mem); | |
450 | if (IS_ERR(hcd->regs)) { | |
451 | error = PTR_ERR(hcd->regs); | |
452 | goto err; | |
453 | } | |
454 | hcd->rsrc_start = mem->start; | |
455 | hcd->rsrc_len = resource_size(mem); | |
456 | ||
457 | irq = platform_get_irq(pdev, 0); | |
458 | if (irq < 0) { | |
459 | error = -ENODEV; | |
460 | goto err; | |
461 | } | |
462 | ||
463 | error = usb_add_hcd(hcd, irq, 0); | |
464 | if (error) | |
465 | goto err; | |
466 | ||
467 | device_wakeup_enable(hcd->self.controller); | |
468 | ||
469 | error = ohci_da8xx_register_notify(hcd); | |
470 | if (error) | |
471 | goto err_remove_hcd; | |
472 | ||
473 | return 0; | |
474 | ||
475 | err_remove_hcd: | |
476 | usb_remove_hcd(hcd); | |
477 | err: | |
478 | usb_put_hcd(hcd); | |
479 | return error; | |
480 | } | |
481 | ||
482 | static int ohci_da8xx_remove(struct platform_device *pdev) | |
483 | { | |
484 | struct usb_hcd *hcd = platform_get_drvdata(pdev); | |
485 | ||
486 | ohci_da8xx_unregister_notify(hcd); | |
487 | usb_remove_hcd(hcd); | |
488 | usb_put_hcd(hcd); | |
489 | ||
490 | return 0; | |
491 | } | |
492 | ||
493 | #ifdef CONFIG_PM | |
494 | static int ohci_da8xx_suspend(struct platform_device *pdev, | |
495 | pm_message_t message) | |
496 | { | |
497 | struct usb_hcd *hcd = platform_get_drvdata(pdev); | |
498 | struct ohci_hcd *ohci = hcd_to_ohci(hcd); | |
499 | bool do_wakeup = device_may_wakeup(&pdev->dev); | |
500 | int ret; | |
501 | ||
502 | ||
503 | if (time_before(jiffies, ohci->next_statechange)) | |
504 | msleep(5); | |
505 | ohci->next_statechange = jiffies; | |
506 | ||
507 | ret = ohci_suspend(hcd, do_wakeup); | |
508 | if (ret) | |
509 | return ret; | |
510 | ||
511 | ohci_da8xx_disable(hcd); | |
512 | hcd->state = HC_STATE_SUSPENDED; | |
513 | ||
514 | return ret; | |
515 | } | |
516 | ||
517 | static int ohci_da8xx_resume(struct platform_device *dev) | |
518 | { | |
519 | struct usb_hcd *hcd = platform_get_drvdata(dev); | |
520 | struct ohci_hcd *ohci = hcd_to_ohci(hcd); | |
521 | int ret; | |
522 | ||
523 | if (time_before(jiffies, ohci->next_statechange)) | |
524 | msleep(5); | |
525 | ohci->next_statechange = jiffies; | |
526 | ||
527 | ret = ohci_da8xx_enable(hcd); | |
528 | if (ret) | |
529 | return ret; | |
530 | ||
531 | ohci_resume(hcd, false); | |
532 | ||
533 | return 0; | |
534 | } | |
535 | #endif | |
536 | ||
537 | static const struct ohci_driver_overrides da8xx_overrides __initconst = { | |
538 | .reset = ohci_da8xx_reset, | |
539 | .extra_priv_size = sizeof(struct da8xx_ohci_hcd), | |
540 | }; | |
541 | ||
542 | /* | |
543 | * Driver definition to register with platform structure. | |
544 | */ | |
545 | static struct platform_driver ohci_hcd_da8xx_driver = { | |
546 | .probe = ohci_da8xx_probe, | |
547 | .remove = ohci_da8xx_remove, | |
548 | .shutdown = usb_hcd_platform_shutdown, | |
549 | #ifdef CONFIG_PM | |
550 | .suspend = ohci_da8xx_suspend, | |
551 | .resume = ohci_da8xx_resume, | |
552 | #endif | |
553 | .driver = { | |
554 | .name = DRV_NAME, | |
555 | .of_match_table = of_match_ptr(da8xx_ohci_ids), | |
556 | }, | |
557 | }; | |
558 | ||
559 | static int __init ohci_da8xx_init(void) | |
560 | { | |
561 | ||
562 | if (usb_disabled()) | |
563 | return -ENODEV; | |
564 | ||
565 | pr_info("%s: " DRIVER_DESC "\n", DRV_NAME); | |
566 | ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides); | |
567 | ||
568 | /* | |
569 | * The Davinci da8xx HW has some unusual quirks, which require | |
570 | * da8xx-specific workarounds. We override certain hc_driver | |
571 | * functions here to achieve that. We explicitly do not enhance | |
572 | * ohci_driver_overrides to allow this more easily, since this | |
573 | * is an unusual case, and we don't want to encourage others to | |
574 | * override these functions by making it too easy. | |
575 | */ | |
576 | ||
577 | orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control; | |
578 | orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data; | |
579 | ||
580 | ohci_da8xx_hc_driver.hub_status_data = ohci_da8xx_hub_status_data; | |
581 | ohci_da8xx_hc_driver.hub_control = ohci_da8xx_hub_control; | |
582 | ||
583 | return platform_driver_register(&ohci_hcd_da8xx_driver); | |
584 | } | |
585 | module_init(ohci_da8xx_init); | |
586 | ||
587 | static void __exit ohci_da8xx_exit(void) | |
588 | { | |
589 | platform_driver_unregister(&ohci_hcd_da8xx_driver); | |
590 | } | |
591 | module_exit(ohci_da8xx_exit); | |
592 | MODULE_DESCRIPTION(DRIVER_DESC); | |
593 | MODULE_LICENSE("GPL"); | |
594 | MODULE_ALIAS("platform:" DRV_NAME); |