]>
Commit | Line | Data |
---|---|---|
1 | /* SPDX-License-Identifier: GPL-2.0-or-later */ | |
2 | /* | |
3 | * max8973-regulator.h -- MAXIM 8973 regulator | |
4 | * | |
5 | * Interface for regulator driver for MAXIM 8973 DC-DC step-down | |
6 | * switching regulator. | |
7 | * | |
8 | * Copyright (C) 2012 NVIDIA Corporation | |
9 | ||
10 | * Author: Laxman Dewangan <ldewangan@nvidia.com> | |
11 | */ | |
12 | ||
13 | #ifndef __LINUX_REGULATOR_MAX8973_H | |
14 | #define __LINUX_REGULATOR_MAX8973_H | |
15 | ||
16 | /* | |
17 | * Control flags for configuration of the device. | |
18 | * Client need to pass this information with ORed | |
19 | */ | |
20 | #define MAX8973_CONTROL_REMOTE_SENSE_ENABLE 0x00000001 | |
21 | #define MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE 0x00000002 | |
22 | #define MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE 0x00000004 | |
23 | #define MAX8973_CONTROL_BIAS_ENABLE 0x00000008 | |
24 | #define MAX8973_CONTROL_PULL_DOWN_ENABLE 0x00000010 | |
25 | #define MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE 0x00000020 | |
26 | ||
27 | #define MAX8973_CONTROL_CLKADV_TRIP_DISABLED 0x00000000 | |
28 | #define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US 0x00010000 | |
29 | #define MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US 0x00020000 | |
30 | #define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS 0x00030000 | |
31 | ||
32 | #define MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL 0x00000000 | |
33 | #define MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER 0x00100000 | |
34 | #define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER 0x00200000 | |
35 | #define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER 0x00300000 | |
36 | ||
37 | /* | |
38 | * struct max8973_regulator_platform_data - max8973 regulator platform data. | |
39 | * | |
40 | * @reg_init_data: The regulator init data. | |
41 | * @control_flags: Control flags which are ORed value of above flags to | |
42 | * configure device. | |
43 | * @junction_temp_warning: Junction temp in millicelcius on which warning need | |
44 | * to be set. Thermal functionality is only supported on | |
45 | * MAX77621. The threshold warning supported by MAX77621 | |
46 | * are 120C and 140C. | |
47 | * @enable_ext_control: Enable the voltage enable/disable through external | |
48 | * control signal from EN input pin. If it is false then | |
49 | * voltage output will be enabled/disabled through EN bit of | |
50 | * device register. | |
51 | * @enable_gpio: Enable GPIO. If EN pin is controlled through GPIO from host | |
52 | * then GPIO number can be provided. If no GPIO controlled then | |
53 | * it should be -1. | |
54 | * @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic. | |
55 | * @dvs_def_state: Default state of dvs. 1 if it is high else 0. | |
56 | */ | |
57 | struct max8973_regulator_platform_data { | |
58 | struct regulator_init_data *reg_init_data; | |
59 | unsigned long control_flags; | |
60 | unsigned long junction_temp_warning; | |
61 | bool enable_ext_control; | |
62 | int enable_gpio; | |
63 | int dvs_gpio; | |
64 | unsigned dvs_def_state:1; | |
65 | }; | |
66 | ||
67 | #endif /* __LINUX_REGULATOR_MAX8973_H */ |