]>
Commit | Line | Data |
---|---|---|
1 | # -*- Mode: Python -*- | |
2 | # vim: filetype=python | |
3 | # | |
4 | ||
5 | ## | |
6 | # = Net devices | |
7 | ## | |
8 | ||
9 | { 'include': 'common.json' } | |
10 | { 'include': 'sockets.json' } | |
11 | ||
12 | ## | |
13 | # @set_link: | |
14 | # | |
15 | # Sets the link status of a virtual network adapter. | |
16 | # | |
17 | # @name: the device name of the virtual network adapter | |
18 | # | |
19 | # @up: true to set the link status to be up | |
20 | # | |
21 | # Returns: Nothing on success If @name is not a valid network device, | |
22 | # DeviceNotFound | |
23 | # | |
24 | # Since: 0.14 | |
25 | # | |
26 | # Notes: Not all network adapters support setting link status. This | |
27 | # command will succeed even if the network adapter does not | |
28 | # support link status notification. | |
29 | # | |
30 | # Example: | |
31 | # | |
32 | # -> { "execute": "set_link", | |
33 | # "arguments": { "name": "e1000.0", "up": false } } | |
34 | # <- { "return": {} } | |
35 | ## | |
36 | { 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} } | |
37 | ||
38 | ## | |
39 | # @netdev_add: | |
40 | # | |
41 | # Add a network backend. | |
42 | # | |
43 | # Additional arguments depend on the type. | |
44 | # | |
45 | # Since: 0.14 | |
46 | # | |
47 | # Returns: Nothing on success If @type is not a valid network backend, | |
48 | # DeviceNotFound | |
49 | # | |
50 | # Example: | |
51 | # | |
52 | # -> { "execute": "netdev_add", | |
53 | # "arguments": { "type": "user", "id": "netdev1", | |
54 | # "dnssearch": [ { "str": "example.org" } ] } } | |
55 | # <- { "return": {} } | |
56 | ## | |
57 | { 'command': 'netdev_add', 'data': 'Netdev', 'boxed': true, | |
58 | 'allow-preconfig': true } | |
59 | ||
60 | ## | |
61 | # @netdev_del: | |
62 | # | |
63 | # Remove a network backend. | |
64 | # | |
65 | # @id: the name of the network backend to remove | |
66 | # | |
67 | # Returns: Nothing on success If @id is not a valid network backend, | |
68 | # DeviceNotFound | |
69 | # | |
70 | # Since: 0.14 | |
71 | # | |
72 | # Example: | |
73 | # | |
74 | # -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } } | |
75 | # <- { "return": {} } | |
76 | ## | |
77 | { 'command': 'netdev_del', 'data': {'id': 'str'}, | |
78 | 'allow-preconfig': true } | |
79 | ||
80 | ## | |
81 | # @NetLegacyNicOptions: | |
82 | # | |
83 | # Create a new Network Interface Card. | |
84 | # | |
85 | # @netdev: id of -netdev to connect to | |
86 | # | |
87 | # @macaddr: MAC address | |
88 | # | |
89 | # @model: device model (e1000, rtl8139, virtio etc.) | |
90 | # | |
91 | # @addr: PCI device address | |
92 | # | |
93 | # @vectors: number of MSI-x vectors, 0 to disable MSI-X | |
94 | # | |
95 | # Since: 1.2 | |
96 | ## | |
97 | { 'struct': 'NetLegacyNicOptions', | |
98 | 'data': { | |
99 | '*netdev': 'str', | |
100 | '*macaddr': 'str', | |
101 | '*model': 'str', | |
102 | '*addr': 'str', | |
103 | '*vectors': 'uint32' } } | |
104 | ||
105 | ## | |
106 | # @NetdevUserOptions: | |
107 | # | |
108 | # Use the user mode network stack which requires no administrator | |
109 | # privilege to run. | |
110 | # | |
111 | # @hostname: client hostname reported by the builtin DHCP server | |
112 | # | |
113 | # @restrict: isolate the guest from the host | |
114 | # | |
115 | # @ipv4: whether to support IPv4, default true for enabled (since 2.6) | |
116 | # | |
117 | # @ipv6: whether to support IPv6, default true for enabled (since 2.6) | |
118 | # | |
119 | # @ip: legacy parameter, use net= instead | |
120 | # | |
121 | # @net: IP network address that the guest will see, in the form | |
122 | # addr[/netmask] The netmask is optional, and can be either in the | |
123 | # form a.b.c.d or as a number of valid top-most bits. Default is | |
124 | # 10.0.2.0/24. | |
125 | # | |
126 | # @host: guest-visible address of the host | |
127 | # | |
128 | # @tftp: root directory of the built-in TFTP server | |
129 | # | |
130 | # @bootfile: BOOTP filename, for use with tftp= | |
131 | # | |
132 | # @dhcpstart: the first of the 16 IPs the built-in DHCP server can | |
133 | # assign | |
134 | # | |
135 | # @dns: guest-visible address of the virtual nameserver | |
136 | # | |
137 | # @dnssearch: list of DNS suffixes to search, passed as DHCP option to | |
138 | # the guest | |
139 | # | |
140 | # @domainname: guest-visible domain name of the virtual nameserver | |
141 | # (since 3.0) | |
142 | # | |
143 | # @ipv6-prefix: IPv6 network prefix (default is fec0::) (since 2.6). | |
144 | # The network prefix is given in the usual hexadecimal IPv6 | |
145 | # address notation. | |
146 | # | |
147 | # @ipv6-prefixlen: IPv6 network prefix length (default is 64) (since | |
148 | # 2.6) | |
149 | # | |
150 | # @ipv6-host: guest-visible IPv6 address of the host (since 2.6) | |
151 | # | |
152 | # @ipv6-dns: guest-visible IPv6 address of the virtual nameserver | |
153 | # (since 2.6) | |
154 | # | |
155 | # @smb: root directory of the built-in SMB server | |
156 | # | |
157 | # @smbserver: IP address of the built-in SMB server | |
158 | # | |
159 | # @hostfwd: redirect incoming TCP or UDP host connections to guest | |
160 | # endpoints | |
161 | # | |
162 | # @guestfwd: forward guest TCP connections | |
163 | # | |
164 | # @tftp-server-name: RFC2132 "TFTP server name" string (Since 3.1) | |
165 | # | |
166 | # Since: 1.2 | |
167 | ## | |
168 | { 'struct': 'NetdevUserOptions', | |
169 | 'data': { | |
170 | '*hostname': 'str', | |
171 | '*restrict': 'bool', | |
172 | '*ipv4': 'bool', | |
173 | '*ipv6': 'bool', | |
174 | '*ip': 'str', | |
175 | '*net': 'str', | |
176 | '*host': 'str', | |
177 | '*tftp': 'str', | |
178 | '*bootfile': 'str', | |
179 | '*dhcpstart': 'str', | |
180 | '*dns': 'str', | |
181 | '*dnssearch': ['String'], | |
182 | '*domainname': 'str', | |
183 | '*ipv6-prefix': 'str', | |
184 | '*ipv6-prefixlen': 'int', | |
185 | '*ipv6-host': 'str', | |
186 | '*ipv6-dns': 'str', | |
187 | '*smb': 'str', | |
188 | '*smbserver': 'str', | |
189 | '*hostfwd': ['String'], | |
190 | '*guestfwd': ['String'], | |
191 | '*tftp-server-name': 'str' } } | |
192 | ||
193 | ## | |
194 | # @NetdevTapOptions: | |
195 | # | |
196 | # Used to configure a host TAP network interface backend. | |
197 | # | |
198 | # @ifname: interface name | |
199 | # | |
200 | # @fd: file descriptor of an already opened tap | |
201 | # | |
202 | # @fds: multiple file descriptors of already opened multiqueue capable | |
203 | # tap | |
204 | # | |
205 | # @script: script to initialize the interface | |
206 | # | |
207 | # @downscript: script to shut down the interface | |
208 | # | |
209 | # @br: bridge name (since 2.8) | |
210 | # | |
211 | # @helper: command to execute to configure bridge | |
212 | # | |
213 | # @sndbuf: send buffer limit. Understands [TGMKkb] suffixes. | |
214 | # | |
215 | # @vnet_hdr: enable the IFF_VNET_HDR flag on the tap interface | |
216 | # | |
217 | # @vhost: enable vhost-net network accelerator | |
218 | # | |
219 | # @vhostfd: file descriptor of an already opened vhost net device | |
220 | # | |
221 | # @vhostfds: file descriptors of multiple already opened vhost net | |
222 | # devices | |
223 | # | |
224 | # @vhostforce: vhost on for non-MSIX virtio guests | |
225 | # | |
226 | # @queues: number of queues to be created for multiqueue capable tap | |
227 | # | |
228 | # @poll-us: maximum number of microseconds that could be spent on busy | |
229 | # polling for tap (since 2.7) | |
230 | # | |
231 | # Since: 1.2 | |
232 | ## | |
233 | { 'struct': 'NetdevTapOptions', | |
234 | 'data': { | |
235 | '*ifname': 'str', | |
236 | '*fd': 'str', | |
237 | '*fds': 'str', | |
238 | '*script': 'str', | |
239 | '*downscript': 'str', | |
240 | '*br': 'str', | |
241 | '*helper': 'str', | |
242 | '*sndbuf': 'size', | |
243 | '*vnet_hdr': 'bool', | |
244 | '*vhost': 'bool', | |
245 | '*vhostfd': 'str', | |
246 | '*vhostfds': 'str', | |
247 | '*vhostforce': 'bool', | |
248 | '*queues': 'uint32', | |
249 | '*poll-us': 'uint32'} } | |
250 | ||
251 | ## | |
252 | # @NetdevSocketOptions: | |
253 | # | |
254 | # Socket netdevs are used to establish a network connection to another | |
255 | # QEMU virtual machine via a TCP socket. | |
256 | # | |
257 | # @fd: file descriptor of an already opened socket | |
258 | # | |
259 | # @listen: port number, and optional hostname, to listen on | |
260 | # | |
261 | # @connect: port number, and optional hostname, to connect to | |
262 | # | |
263 | # @mcast: UDP multicast address and port number | |
264 | # | |
265 | # @localaddr: source address and port for multicast and udp packets | |
266 | # | |
267 | # @udp: UDP unicast address and port number | |
268 | # | |
269 | # Since: 1.2 | |
270 | ## | |
271 | { 'struct': 'NetdevSocketOptions', | |
272 | 'data': { | |
273 | '*fd': 'str', | |
274 | '*listen': 'str', | |
275 | '*connect': 'str', | |
276 | '*mcast': 'str', | |
277 | '*localaddr': 'str', | |
278 | '*udp': 'str' } } | |
279 | ||
280 | ## | |
281 | # @NetdevL2TPv3Options: | |
282 | # | |
283 | # Configure an Ethernet over L2TPv3 tunnel. | |
284 | # | |
285 | # @src: source address | |
286 | # | |
287 | # @dst: destination address | |
288 | # | |
289 | # @srcport: source port - mandatory for udp, optional for ip | |
290 | # | |
291 | # @dstport: destination port - mandatory for udp, optional for ip | |
292 | # | |
293 | # @ipv6: force the use of ipv6 | |
294 | # | |
295 | # @udp: use the udp version of l2tpv3 encapsulation | |
296 | # | |
297 | # @cookie64: use 64 bit cookies | |
298 | # | |
299 | # @counter: have sequence counter | |
300 | # | |
301 | # @pincounter: pin sequence counter to zero - workaround for buggy | |
302 | # implementations or networks with packet reorder | |
303 | # | |
304 | # @txcookie: 32 or 64 bit transmit cookie | |
305 | # | |
306 | # @rxcookie: 32 or 64 bit receive cookie | |
307 | # | |
308 | # @txsession: 32 bit transmit session | |
309 | # | |
310 | # @rxsession: 32 bit receive session - if not specified set to the | |
311 | # same value as transmit | |
312 | # | |
313 | # @offset: additional offset - allows the insertion of additional | |
314 | # application-specific data before the packet payload | |
315 | # | |
316 | # Since: 2.1 | |
317 | ## | |
318 | { 'struct': 'NetdevL2TPv3Options', | |
319 | 'data': { | |
320 | 'src': 'str', | |
321 | 'dst': 'str', | |
322 | '*srcport': 'str', | |
323 | '*dstport': 'str', | |
324 | '*ipv6': 'bool', | |
325 | '*udp': 'bool', | |
326 | '*cookie64': 'bool', | |
327 | '*counter': 'bool', | |
328 | '*pincounter': 'bool', | |
329 | '*txcookie': 'uint64', | |
330 | '*rxcookie': 'uint64', | |
331 | 'txsession': 'uint32', | |
332 | '*rxsession': 'uint32', | |
333 | '*offset': 'uint32' } } | |
334 | ||
335 | ## | |
336 | # @NetdevVdeOptions: | |
337 | # | |
338 | # Connect to a vde switch running on the host. | |
339 | # | |
340 | # @sock: socket path | |
341 | # | |
342 | # @port: port number | |
343 | # | |
344 | # @group: group owner of socket | |
345 | # | |
346 | # @mode: permissions for socket | |
347 | # | |
348 | # Since: 1.2 | |
349 | ## | |
350 | { 'struct': 'NetdevVdeOptions', | |
351 | 'data': { | |
352 | '*sock': 'str', | |
353 | '*port': 'uint16', | |
354 | '*group': 'str', | |
355 | '*mode': 'uint16' } } | |
356 | ||
357 | ## | |
358 | # @NetdevBridgeOptions: | |
359 | # | |
360 | # Connect a host TAP network interface to a host bridge device. | |
361 | # | |
362 | # @br: bridge name | |
363 | # | |
364 | # @helper: command to execute to configure bridge | |
365 | # | |
366 | # Since: 1.2 | |
367 | ## | |
368 | { 'struct': 'NetdevBridgeOptions', | |
369 | 'data': { | |
370 | '*br': 'str', | |
371 | '*helper': 'str' } } | |
372 | ||
373 | ## | |
374 | # @NetdevHubPortOptions: | |
375 | # | |
376 | # Connect two or more net clients through a software hub. | |
377 | # | |
378 | # @hubid: hub identifier number | |
379 | # | |
380 | # @netdev: used to connect hub to a netdev instead of a device (since | |
381 | # 2.12) | |
382 | # | |
383 | # Since: 1.2 | |
384 | ## | |
385 | { 'struct': 'NetdevHubPortOptions', | |
386 | 'data': { | |
387 | 'hubid': 'int32', | |
388 | '*netdev': 'str' } } | |
389 | ||
390 | ## | |
391 | # @NetdevNetmapOptions: | |
392 | # | |
393 | # Connect a client to a netmap-enabled NIC or to a VALE switch port | |
394 | # | |
395 | # @ifname: Either the name of an existing network interface supported | |
396 | # by netmap, or the name of a VALE port (created on the fly). A | |
397 | # VALE port name is in the form 'valeXXX:YYY', where XXX and YYY | |
398 | # are non-negative integers. XXX identifies a switch and YYY | |
399 | # identifies a port of the switch. VALE ports having the same XXX | |
400 | # are therefore connected to the same switch. | |
401 | # | |
402 | # @devname: path of the netmap device (default: '/dev/netmap'). | |
403 | # | |
404 | # Since: 2.0 | |
405 | ## | |
406 | { 'struct': 'NetdevNetmapOptions', | |
407 | 'data': { | |
408 | 'ifname': 'str', | |
409 | '*devname': 'str' } } | |
410 | ||
411 | ## | |
412 | # @AFXDPMode: | |
413 | # | |
414 | # Attach mode for a default XDP program | |
415 | # | |
416 | # @skb: generic mode, no driver support necessary | |
417 | # | |
418 | # @native: DRV mode, program is attached to a driver, packets are passed to | |
419 | # the socket without allocation of skb. | |
420 | # | |
421 | # Since: 8.2 | |
422 | ## | |
423 | { 'enum': 'AFXDPMode', | |
424 | 'data': [ 'native', 'skb' ], | |
425 | 'if': 'CONFIG_AF_XDP' } | |
426 | ||
427 | ## | |
428 | # @NetdevAFXDPOptions: | |
429 | # | |
430 | # AF_XDP network backend | |
431 | # | |
432 | # @ifname: The name of an existing network interface. | |
433 | # | |
434 | # @mode: Attach mode for a default XDP program. If not specified, then | |
435 | # 'native' will be tried first, then 'skb'. | |
436 | # | |
437 | # @force-copy: Force XDP copy mode even if device supports zero-copy. | |
438 | # (default: false) | |
439 | # | |
440 | # @queues: number of queues to be used for multiqueue interfaces (default: 1). | |
441 | # | |
442 | # @start-queue: Use @queues starting from this queue number (default: 0). | |
443 | # | |
444 | # @inhibit: Don't load a default XDP program, use one already loaded to | |
445 | # the interface (default: false). Requires @sock-fds. | |
446 | # | |
447 | # @sock-fds: A colon (:) separated list of file descriptors for already open | |
448 | # but not bound AF_XDP sockets in the queue order. One fd per queue. | |
449 | # These descriptors should already be added into XDP socket map for | |
450 | # corresponding queues. Requires @inhibit. | |
451 | # | |
452 | # Since: 8.2 | |
453 | ## | |
454 | { 'struct': 'NetdevAFXDPOptions', | |
455 | 'data': { | |
456 | 'ifname': 'str', | |
457 | '*mode': 'AFXDPMode', | |
458 | '*force-copy': 'bool', | |
459 | '*queues': 'int', | |
460 | '*start-queue': 'int', | |
461 | '*inhibit': 'bool', | |
462 | '*sock-fds': 'str' }, | |
463 | 'if': 'CONFIG_AF_XDP' } | |
464 | ||
465 | ## | |
466 | # @NetdevVhostUserOptions: | |
467 | # | |
468 | # Vhost-user network backend | |
469 | # | |
470 | # @chardev: name of a unix socket chardev | |
471 | # | |
472 | # @vhostforce: vhost on for non-MSIX virtio guests (default: false). | |
473 | # | |
474 | # @queues: number of queues to be created for multiqueue vhost-user | |
475 | # (default: 1) (Since 2.5) | |
476 | # | |
477 | # Since: 2.1 | |
478 | ## | |
479 | { 'struct': 'NetdevVhostUserOptions', | |
480 | 'data': { | |
481 | 'chardev': 'str', | |
482 | '*vhostforce': 'bool', | |
483 | '*queues': 'int' } } | |
484 | ||
485 | ## | |
486 | # @NetdevVhostVDPAOptions: | |
487 | # | |
488 | # Vhost-vdpa network backend | |
489 | # | |
490 | # vDPA device is a device that uses a datapath which complies with the | |
491 | # virtio specifications with a vendor specific control path. | |
492 | # | |
493 | # @vhostdev: path of vhost-vdpa device (default:'/dev/vhost-vdpa-0') | |
494 | # | |
495 | # @vhostfd: file descriptor of an already opened vhost vdpa device | |
496 | # | |
497 | # @queues: number of queues to be created for multiqueue vhost-vdpa | |
498 | # (default: 1) | |
499 | # | |
500 | # @x-svq: Start device with (experimental) shadow virtqueue. (Since | |
501 | # 7.1) (default: false) | |
502 | # | |
503 | # Features: | |
504 | # | |
505 | # @unstable: Member @x-svq is experimental. | |
506 | # | |
507 | # Since: 5.1 | |
508 | ## | |
509 | { 'struct': 'NetdevVhostVDPAOptions', | |
510 | 'data': { | |
511 | '*vhostdev': 'str', | |
512 | '*vhostfd': 'str', | |
513 | '*queues': 'int', | |
514 | '*x-svq': {'type': 'bool', 'features' : [ 'unstable'] } } } | |
515 | ||
516 | ## | |
517 | # @NetdevVmnetHostOptions: | |
518 | # | |
519 | # vmnet (host mode) network backend. | |
520 | # | |
521 | # Allows the vmnet interface to communicate with other vmnet | |
522 | # interfaces that are in host mode and also with the host. | |
523 | # | |
524 | # @start-address: The starting IPv4 address to use for the interface. | |
525 | # Must be in the private IP range (RFC 1918). Must be specified | |
526 | # along with @end-address and @subnet-mask. This address is used | |
527 | # as the gateway address. The subsequent address up to and | |
528 | # including end-address are placed in the DHCP pool. | |
529 | # | |
530 | # @end-address: The DHCP IPv4 range end address to use for the | |
531 | # interface. Must be in the private IP range (RFC 1918). Must be | |
532 | # specified along with @start-address and @subnet-mask. | |
533 | # | |
534 | # @subnet-mask: The IPv4 subnet mask to use on the interface. Must be | |
535 | # specified along with @start-address and @subnet-mask. | |
536 | # | |
537 | # @isolated: Enable isolation for this interface. Interface isolation | |
538 | # ensures that vmnet interface is not able to communicate with any | |
539 | # other vmnet interfaces. Only communication with host is | |
540 | # allowed. Requires at least macOS Big Sur 11.0. | |
541 | # | |
542 | # @net-uuid: The identifier (UUID) to uniquely identify the isolated | |
543 | # network vmnet interface should be added to. If set, no DHCP | |
544 | # service is provided for this interface and network communication | |
545 | # is allowed only with other interfaces added to this network | |
546 | # identified by the UUID. Requires at least macOS Big Sur 11.0. | |
547 | # | |
548 | # Since: 7.1 | |
549 | ## | |
550 | { 'struct': 'NetdevVmnetHostOptions', | |
551 | 'data': { | |
552 | '*start-address': 'str', | |
553 | '*end-address': 'str', | |
554 | '*subnet-mask': 'str', | |
555 | '*isolated': 'bool', | |
556 | '*net-uuid': 'str' }, | |
557 | 'if': 'CONFIG_VMNET' } | |
558 | ||
559 | ## | |
560 | # @NetdevVmnetSharedOptions: | |
561 | # | |
562 | # vmnet (shared mode) network backend. | |
563 | # | |
564 | # Allows traffic originating from the vmnet interface to reach the | |
565 | # Internet through a network address translator (NAT). The vmnet | |
566 | # interface can communicate with the host and with other shared mode | |
567 | # interfaces on the same subnet. If no DHCP settings, subnet mask and | |
568 | # IPv6 prefix specified, the interface can communicate with any of | |
569 | # other interfaces in shared mode. | |
570 | # | |
571 | # @start-address: The starting IPv4 address to use for the interface. | |
572 | # Must be in the private IP range (RFC 1918). Must be specified | |
573 | # along with @end-address and @subnet-mask. This address is used | |
574 | # as the gateway address. The subsequent address up to and | |
575 | # including end-address are placed in the DHCP pool. | |
576 | # | |
577 | # @end-address: The DHCP IPv4 range end address to use for the | |
578 | # interface. Must be in the private IP range (RFC 1918). Must be | |
579 | # specified along with @start-address and @subnet-mask. | |
580 | # | |
581 | # @subnet-mask: The IPv4 subnet mask to use on the interface. Must be | |
582 | # specified along with @start-address and @subnet-mask. | |
583 | # | |
584 | # @isolated: Enable isolation for this interface. Interface isolation | |
585 | # ensures that vmnet interface is not able to communicate with any | |
586 | # other vmnet interfaces. Only communication with host is | |
587 | # allowed. Requires at least macOS Big Sur 11.0. | |
588 | # | |
589 | # @nat66-prefix: The IPv6 prefix to use into guest network. Must be a | |
590 | # unique local address i.e. start with fd00::/8 and have length of | |
591 | # 64. | |
592 | # | |
593 | # Since: 7.1 | |
594 | ## | |
595 | { 'struct': 'NetdevVmnetSharedOptions', | |
596 | 'data': { | |
597 | '*start-address': 'str', | |
598 | '*end-address': 'str', | |
599 | '*subnet-mask': 'str', | |
600 | '*isolated': 'bool', | |
601 | '*nat66-prefix': 'str' }, | |
602 | 'if': 'CONFIG_VMNET' } | |
603 | ||
604 | ## | |
605 | # @NetdevVmnetBridgedOptions: | |
606 | # | |
607 | # vmnet (bridged mode) network backend. | |
608 | # | |
609 | # Bridges the vmnet interface with a physical network interface. | |
610 | # | |
611 | # @ifname: The name of the physical interface to be bridged. | |
612 | # | |
613 | # @isolated: Enable isolation for this interface. Interface isolation | |
614 | # ensures that vmnet interface is not able to communicate with any | |
615 | # other vmnet interfaces. Only communication with host is | |
616 | # allowed. Requires at least macOS Big Sur 11.0. | |
617 | # | |
618 | # Since: 7.1 | |
619 | ## | |
620 | { 'struct': 'NetdevVmnetBridgedOptions', | |
621 | 'data': { | |
622 | 'ifname': 'str', | |
623 | '*isolated': 'bool' }, | |
624 | 'if': 'CONFIG_VMNET' } | |
625 | ||
626 | ## | |
627 | # @NetdevStreamOptions: | |
628 | # | |
629 | # Configuration info for stream socket netdev | |
630 | # | |
631 | # @addr: socket address to listen on (server=true) or connect to | |
632 | # (server=false) | |
633 | # | |
634 | # @server: create server socket (default: false) | |
635 | # | |
636 | # @reconnect: For a client socket, if a socket is disconnected, then | |
637 | # attempt a reconnect after the given number of seconds. Setting | |
638 | # this to zero disables this function. (default: 0) (since 8.0) | |
639 | # | |
640 | # Only SocketAddress types 'unix', 'inet' and 'fd' are supported. | |
641 | # | |
642 | # Since: 7.2 | |
643 | ## | |
644 | { 'struct': 'NetdevStreamOptions', | |
645 | 'data': { | |
646 | 'addr': 'SocketAddress', | |
647 | '*server': 'bool', | |
648 | '*reconnect': 'uint32' } } | |
649 | ||
650 | ## | |
651 | # @NetdevDgramOptions: | |
652 | # | |
653 | # Configuration info for datagram socket netdev. | |
654 | # | |
655 | # @remote: remote address | |
656 | # | |
657 | # @local: local address | |
658 | # | |
659 | # Only SocketAddress types 'unix', 'inet' and 'fd' are supported. | |
660 | # | |
661 | # If remote address is present and it's a multicast address, local | |
662 | # address is optional. Otherwise local address is required and remote | |
663 | # address is optional. | |
664 | # | |
665 | # .. table:: Valid parameters combination table | |
666 | # :widths: auto | |
667 | # | |
668 | # ============= ======== ===== | |
669 | # remote local okay? | |
670 | # ============= ======== ===== | |
671 | # absent absent no | |
672 | # absent not fd no | |
673 | # absent fd yes | |
674 | # multicast absent yes | |
675 | # multicast present yes | |
676 | # not multicast absent no | |
677 | # not multicast present yes | |
678 | # ============= ======== ===== | |
679 | # | |
680 | # Since: 7.2 | |
681 | ## | |
682 | { 'struct': 'NetdevDgramOptions', | |
683 | 'data': { | |
684 | '*local': 'SocketAddress', | |
685 | '*remote': 'SocketAddress' } } | |
686 | ||
687 | ## | |
688 | # @NetClientDriver: | |
689 | # | |
690 | # Available netdev drivers. | |
691 | # | |
692 | # @l2tpv3: since 2.1 | |
693 | # @vhost-vdpa: since 5.1 | |
694 | # @vmnet-host: since 7.1 | |
695 | # @vmnet-shared: since 7.1 | |
696 | # @vmnet-bridged: since 7.1 | |
697 | # @stream: since 7.2 | |
698 | # @dgram: since 7.2 | |
699 | # @af-xdp: since 8.2 | |
700 | # | |
701 | # Since: 2.7 | |
702 | ## | |
703 | { 'enum': 'NetClientDriver', | |
704 | 'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'stream', | |
705 | 'dgram', 'vde', 'bridge', 'hubport', 'netmap', 'vhost-user', | |
706 | 'vhost-vdpa', | |
707 | { 'name': 'af-xdp', 'if': 'CONFIG_AF_XDP' }, | |
708 | { 'name': 'vmnet-host', 'if': 'CONFIG_VMNET' }, | |
709 | { 'name': 'vmnet-shared', 'if': 'CONFIG_VMNET' }, | |
710 | { 'name': 'vmnet-bridged', 'if': 'CONFIG_VMNET' }] } | |
711 | ||
712 | ## | |
713 | # @Netdev: | |
714 | # | |
715 | # Captures the configuration of a network device. | |
716 | # | |
717 | # @id: identifier for monitor commands. | |
718 | # | |
719 | # @type: Specify the driver used for interpreting remaining arguments. | |
720 | # | |
721 | # Since: 1.2 | |
722 | ## | |
723 | { 'union': 'Netdev', | |
724 | 'base': { 'id': 'str', 'type': 'NetClientDriver' }, | |
725 | 'discriminator': 'type', | |
726 | 'data': { | |
727 | 'nic': 'NetLegacyNicOptions', | |
728 | 'user': 'NetdevUserOptions', | |
729 | 'tap': 'NetdevTapOptions', | |
730 | 'l2tpv3': 'NetdevL2TPv3Options', | |
731 | 'socket': 'NetdevSocketOptions', | |
732 | 'stream': 'NetdevStreamOptions', | |
733 | 'dgram': 'NetdevDgramOptions', | |
734 | 'vde': 'NetdevVdeOptions', | |
735 | 'bridge': 'NetdevBridgeOptions', | |
736 | 'hubport': 'NetdevHubPortOptions', | |
737 | 'netmap': 'NetdevNetmapOptions', | |
738 | 'af-xdp': { 'type': 'NetdevAFXDPOptions', | |
739 | 'if': 'CONFIG_AF_XDP' }, | |
740 | 'vhost-user': 'NetdevVhostUserOptions', | |
741 | 'vhost-vdpa': 'NetdevVhostVDPAOptions', | |
742 | 'vmnet-host': { 'type': 'NetdevVmnetHostOptions', | |
743 | 'if': 'CONFIG_VMNET' }, | |
744 | 'vmnet-shared': { 'type': 'NetdevVmnetSharedOptions', | |
745 | 'if': 'CONFIG_VMNET' }, | |
746 | 'vmnet-bridged': { 'type': 'NetdevVmnetBridgedOptions', | |
747 | 'if': 'CONFIG_VMNET' } } } | |
748 | ||
749 | ## | |
750 | # @RxState: | |
751 | # | |
752 | # Packets receiving state | |
753 | # | |
754 | # @normal: filter assigned packets according to the mac-table | |
755 | # | |
756 | # @none: don't receive any assigned packet | |
757 | # | |
758 | # @all: receive all assigned packets | |
759 | # | |
760 | # Since: 1.6 | |
761 | ## | |
762 | { 'enum': 'RxState', 'data': [ 'normal', 'none', 'all' ] } | |
763 | ||
764 | ## | |
765 | # @RxFilterInfo: | |
766 | # | |
767 | # Rx-filter information for a NIC. | |
768 | # | |
769 | # @name: net client name | |
770 | # | |
771 | # @promiscuous: whether promiscuous mode is enabled | |
772 | # | |
773 | # @multicast: multicast receive state | |
774 | # | |
775 | # @unicast: unicast receive state | |
776 | # | |
777 | # @vlan: vlan receive state (Since 2.0) | |
778 | # | |
779 | # @broadcast-allowed: whether to receive broadcast | |
780 | # | |
781 | # @multicast-overflow: multicast table is overflowed or not | |
782 | # | |
783 | # @unicast-overflow: unicast table is overflowed or not | |
784 | # | |
785 | # @main-mac: the main macaddr string | |
786 | # | |
787 | # @vlan-table: a list of active vlan id | |
788 | # | |
789 | # @unicast-table: a list of unicast macaddr string | |
790 | # | |
791 | # @multicast-table: a list of multicast macaddr string | |
792 | # | |
793 | # Since: 1.6 | |
794 | ## | |
795 | { 'struct': 'RxFilterInfo', | |
796 | 'data': { | |
797 | 'name': 'str', | |
798 | 'promiscuous': 'bool', | |
799 | 'multicast': 'RxState', | |
800 | 'unicast': 'RxState', | |
801 | 'vlan': 'RxState', | |
802 | 'broadcast-allowed': 'bool', | |
803 | 'multicast-overflow': 'bool', | |
804 | 'unicast-overflow': 'bool', | |
805 | 'main-mac': 'str', | |
806 | 'vlan-table': ['int'], | |
807 | 'unicast-table': ['str'], | |
808 | 'multicast-table': ['str'] }} | |
809 | ||
810 | ## | |
811 | # @query-rx-filter: | |
812 | # | |
813 | # Return rx-filter information for all NICs (or for the given NIC). | |
814 | # | |
815 | # @name: net client name | |
816 | # | |
817 | # Returns: list of @RxFilterInfo for all NICs (or for the given NIC). | |
818 | # Returns an error if the given @name doesn't exist, or given NIC | |
819 | # doesn't support rx-filter querying, or given net client isn't a | |
820 | # NIC. | |
821 | # | |
822 | # Since: 1.6 | |
823 | # | |
824 | # Example: | |
825 | # | |
826 | # -> { "execute": "query-rx-filter", "arguments": { "name": "vnet0" } } | |
827 | # <- { "return": [ | |
828 | # { | |
829 | # "promiscuous": true, | |
830 | # "name": "vnet0", | |
831 | # "main-mac": "52:54:00:12:34:56", | |
832 | # "unicast": "normal", | |
833 | # "vlan": "normal", | |
834 | # "vlan-table": [ | |
835 | # 4, | |
836 | # 0 | |
837 | # ], | |
838 | # "unicast-table": [ | |
839 | # ], | |
840 | # "multicast": "normal", | |
841 | # "multicast-overflow": false, | |
842 | # "unicast-overflow": false, | |
843 | # "multicast-table": [ | |
844 | # "01:00:5e:00:00:01", | |
845 | # "33:33:00:00:00:01", | |
846 | # "33:33:ff:12:34:56" | |
847 | # ], | |
848 | # "broadcast-allowed": false | |
849 | # } | |
850 | # ] | |
851 | # } | |
852 | ## | |
853 | { 'command': 'query-rx-filter', | |
854 | 'data': { '*name': 'str' }, | |
855 | 'returns': ['RxFilterInfo'] } | |
856 | ||
857 | ## | |
858 | # @NIC_RX_FILTER_CHANGED: | |
859 | # | |
860 | # Emitted once until the 'query-rx-filter' command is executed, the | |
861 | # first event will always be emitted | |
862 | # | |
863 | # @name: net client name | |
864 | # | |
865 | # @path: device path | |
866 | # | |
867 | # Since: 1.6 | |
868 | # | |
869 | # Example: | |
870 | # | |
871 | # <- { "event": "NIC_RX_FILTER_CHANGED", | |
872 | # "data": { "name": "vnet0", | |
873 | # "path": "/machine/peripheral/vnet0/virtio-backend" }, | |
874 | # "timestamp": { "seconds": 1368697518, "microseconds": 326866 } } | |
875 | ## | |
876 | { 'event': 'NIC_RX_FILTER_CHANGED', | |
877 | 'data': { '*name': 'str', 'path': 'str' } } | |
878 | ||
879 | ## | |
880 | # @AnnounceParameters: | |
881 | # | |
882 | # Parameters for self-announce timers | |
883 | # | |
884 | # @initial: Initial delay (in ms) before sending the first GARP/RARP | |
885 | # announcement | |
886 | # | |
887 | # @max: Maximum delay (in ms) between GARP/RARP announcement packets | |
888 | # | |
889 | # @rounds: Number of self-announcement attempts | |
890 | # | |
891 | # @step: Delay increase (in ms) after each self-announcement attempt | |
892 | # | |
893 | # @interfaces: An optional list of interface names, which restricts | |
894 | # the announcement to the listed interfaces. (Since 4.1) | |
895 | # | |
896 | # @id: A name to be used to identify an instance of announce-timers | |
897 | # and to allow it to modified later. Not for use as part of the | |
898 | # migration parameters. (Since 4.1) | |
899 | # | |
900 | # Since: 4.0 | |
901 | ## | |
902 | ||
903 | { 'struct': 'AnnounceParameters', | |
904 | 'data': { 'initial': 'int', | |
905 | 'max': 'int', | |
906 | 'rounds': 'int', | |
907 | 'step': 'int', | |
908 | '*interfaces': ['str'], | |
909 | '*id' : 'str' } } | |
910 | ||
911 | ## | |
912 | # @announce-self: | |
913 | # | |
914 | # Trigger generation of broadcast RARP frames to update network | |
915 | # switches. This can be useful when network bonds fail-over the | |
916 | # active slave. | |
917 | # | |
918 | # Example: | |
919 | # | |
920 | # -> { "execute": "announce-self", | |
921 | # "arguments": { | |
922 | # "initial": 50, "max": 550, "rounds": 10, "step": 50, | |
923 | # "interfaces": ["vn2", "vn3"], "id": "bob" } } | |
924 | # <- { "return": {} } | |
925 | # | |
926 | # Since: 4.0 | |
927 | ## | |
928 | { 'command': 'announce-self', 'boxed': true, | |
929 | 'data' : 'AnnounceParameters'} | |
930 | ||
931 | ## | |
932 | # @FAILOVER_NEGOTIATED: | |
933 | # | |
934 | # Emitted when VIRTIO_NET_F_STANDBY was enabled during feature | |
935 | # negotiation. Failover primary devices which were hidden (not | |
936 | # hotplugged when requested) before will now be hotplugged by the | |
937 | # virtio-net standby device. | |
938 | # | |
939 | # @device-id: QEMU device id of the unplugged device | |
940 | # | |
941 | # Since: 4.2 | |
942 | # | |
943 | # Example: | |
944 | # | |
945 | # <- { "event": "FAILOVER_NEGOTIATED", | |
946 | # "data": { "device-id": "net1" }, | |
947 | # "timestamp": { "seconds": 1368697518, "microseconds": 326866 } } | |
948 | ## | |
949 | { 'event': 'FAILOVER_NEGOTIATED', | |
950 | 'data': {'device-id': 'str'} } | |
951 | ||
952 | ## | |
953 | # @NETDEV_STREAM_CONNECTED: | |
954 | # | |
955 | # Emitted when the netdev stream backend is connected | |
956 | # | |
957 | # @netdev-id: QEMU netdev id that is connected | |
958 | # | |
959 | # @addr: The destination address | |
960 | # | |
961 | # Since: 7.2 | |
962 | # | |
963 | # Examples: | |
964 | # | |
965 | # <- { "event": "NETDEV_STREAM_CONNECTED", | |
966 | # "data": { "netdev-id": "netdev0", | |
967 | # "addr": { "port": "47666", "ipv6": true, | |
968 | # "host": "::1", "type": "inet" } }, | |
969 | # "timestamp": { "seconds": 1666269863, "microseconds": 311222 } } | |
970 | # | |
971 | # <- { "event": "NETDEV_STREAM_CONNECTED", | |
972 | # "data": { "netdev-id": "netdev0", | |
973 | # "addr": { "path": "/tmp/qemu0", "type": "unix" } }, | |
974 | # "timestamp": { "seconds": 1666269706, "microseconds": 413651 } } | |
975 | ## | |
976 | { 'event': 'NETDEV_STREAM_CONNECTED', | |
977 | 'data': { 'netdev-id': 'str', | |
978 | 'addr': 'SocketAddress' } } | |
979 | ||
980 | ## | |
981 | # @NETDEV_STREAM_DISCONNECTED: | |
982 | # | |
983 | # Emitted when the netdev stream backend is disconnected | |
984 | # | |
985 | # @netdev-id: QEMU netdev id that is disconnected | |
986 | # | |
987 | # Since: 7.2 | |
988 | # | |
989 | # Example: | |
990 | # | |
991 | # <- { 'event': 'NETDEV_STREAM_DISCONNECTED', | |
992 | # 'data': {'netdev-id': 'netdev0'}, | |
993 | # 'timestamp': {'seconds': 1663330937, 'microseconds': 526695} } | |
994 | ## | |
995 | { 'event': 'NETDEV_STREAM_DISCONNECTED', | |
996 | 'data': { 'netdev-id': 'str' } } |