Documentation/devicetree/bindings/arm/cpu-capacity.txt

   1 ==========================================
   2 ARM CPUs capacity bindings
   3 ==========================================
   4
   5 ==========================================
   6 1 - Introduction
   7 ==========================================
   8
   9 ARM systems may be configured to have cpus with different power/performance
  10 characteristics within the same chip. In this case, additional information has
  11 to be made available to the kernel for it to be aware of such differences and
  12 take decisions accordingly.
  13
  14 ==========================================
  15 2 - CPU capacity definition
  16 ==========================================
  17
  18 CPU capacity is a number that provides the scheduler information about CPUs
  19 heterogeneity. Such heterogeneity can come from micro-architectural differences
  20 (e.g., ARM big.LITTLE systems) or maximum frequency at which CPUs can run
  21 (e.g., SMP systems with multiple frequency domains). Heterogeneity in this
  22 context is about differing performance characteristics; this binding tries to
  23 capture a first-order approximation of the relative performance of CPUs.
  24
  25 CPU capacities are obtained by running a suitable benchmark. This binding makes
  26 no guarantees on the validity or suitability of any particular benchmark, the
  27 final capacity should, however, be:
  28
  29 * A "single-threaded" or CPU affine benchmark
  30 * Divided by the running frequency of the CPU executing the benchmark
  31 * Not subject to dynamic frequency scaling of the CPU
  32
  33 For the time being we however advise usage of the Dhrystone benchmark. What
  34 above thus becomes:
  35
  36 CPU capacities are obtained by running the Dhrystone benchmark on each CPU at
  37 max frequency (with caches enabled). The obtained DMIPS score is then divided
  38 by the frequency (in MHz) at which the benchmark has been run, so that
  39 DMIPS/MHz are obtained.  Such values are then normalized w.r.t. the highest
  40 score obtained in the system.
  41
  42 ==========================================
  43 3 - capacity-dmips-mhz
  44 ==========================================
  45
  46 capacity-dmips-mhz is an optional cpu node [1] property: u32 value
  47 representing CPU capacity expressed in normalized DMIPS/MHz. At boot time, the
  48 maximum frequency available to the cpu is then used to calculate the capacity
  49 value internally used by the kernel.
  50
  51 capacity-dmips-mhz property is all-or-nothing: if it is specified for a cpu
  52 node, it has to be specified for every other cpu nodes, or the system will
  53 fall back to the default capacity value for every CPU. If cpufreq is not
  54 available, final capacities are calculated by directly using capacity-dmips-
  55 mhz values (normalized w.r.t. the highest value found while parsing the DT).
  56
  57 ===========================================
  58 4 - Examples
  59 ===========================================
  60
  61 Example 1 (ARM 64-bit, 6-cpu system, two clusters):
  62 The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024)
  63 are 1024 and 578 for cluster0 and cluster1. Further normalization
  64 is done by the operating system based on cluster0@max-freq=1100 and
  65 custer1@max-freq=850, final capacities are 1024 for cluster0 and
  66 446 for cluster1 (576*850/1100).
  67
  68 cpus {
  69         #address-cells = <2>;
  70         #size-cells = <0>;
  71
  72         cpu-map {
  73                 cluster0 {
  74                         core0 {
  75                                 cpu = <&A57_0>;
  76                         };
  77                         core1 {
  78                                 cpu = <&A57_1>;
  79                         };
  80                 };
  81
  82                 cluster1 {
  83                         core0 {
  84                                 cpu = <&A53_0>;
  85                         };
  86                         core1 {
  87                                 cpu = <&A53_1>;
  88                         };
  89                         core2 {
  90                                 cpu = <&A53_2>;
  91                         };
  92                         core3 {
  93                                 cpu = <&A53_3>;
  94                         };
  95                 };
  96         };
  97
  98         idle-states {
  99                 entry-method = "psci";
 100
 101                 CPU_SLEEP_0: cpu-sleep-0 {
 102                         compatible = "arm,idle-state";
 103                         arm,psci-suspend-param = <0x0010000>;
 104                         local-timer-stop;
 105                         entry-latency-us = <100>;
 106                         exit-latency-us = <250>;
 107                         min-residency-us = <150>;
 108                 };
 109
 110                 CLUSTER_SLEEP_0: cluster-sleep-0 {
 111                         compatible = "arm,idle-state";
 112                         arm,psci-suspend-param = <0x1010000>;
 113                         local-timer-stop;
 114                         entry-latency-us = <800>;
 115                         exit-latency-us = <700>;
 116                         min-residency-us = <2500>;
 117                 };
 118         };
 119
 120         A57_0: cpu@0 {
 121                 compatible = "arm,cortex-a57","arm,armv8";
 122                 reg = <0x0 0x0>;
 123                 device_type = "cpu";
 124                 enable-method = "psci";
 125                 next-level-cache = <&A57_L2>;
 126                 clocks = <&scpi_dvfs 0>;
 127                 cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 128                 capacity-dmips-mhz = <1024>;
 129         };
 130
 131         A57_1: cpu@1 {
 132                 compatible = "arm,cortex-a57","arm,armv8";
 133                 reg = <0x0 0x1>;
 134                 device_type = "cpu";
 135                 enable-method = "psci";
 136                 next-level-cache = <&A57_L2>;
 137                 clocks = <&scpi_dvfs 0>;
 138                 cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 139                 capacity-dmips-mhz = <1024>;
 140         };
 141
 142         A53_0: cpu@100 {
 143                 compatible = "arm,cortex-a53","arm,armv8";
 144                 reg = <0x0 0x100>;
 145                 device_type = "cpu";
 146                 enable-method = "psci";
 147                 next-level-cache = <&A53_L2>;
 148                 clocks = <&scpi_dvfs 1>;
 149                 cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 150                 capacity-dmips-mhz = <578>;
 151         };
 152
 153         A53_1: cpu@101 {
 154                 compatible = "arm,cortex-a53","arm,armv8";
 155                 reg = <0x0 0x101>;
 156                 device_type = "cpu";
 157                 enable-method = "psci";
 158                 next-level-cache = <&A53_L2>;
 159                 clocks = <&scpi_dvfs 1>;
 160                 cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 161                 capacity-dmips-mhz = <578>;
 162         };
 163
 164         A53_2: cpu@102 {
 165                 compatible = "arm,cortex-a53","arm,armv8";
 166                 reg = <0x0 0x102>;
 167                 device_type = "cpu";
 168                 enable-method = "psci";
 169                 next-level-cache = <&A53_L2>;
 170                 clocks = <&scpi_dvfs 1>;
 171                 cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 172                 capacity-dmips-mhz = <578>;
 173         };
 174
 175         A53_3: cpu@103 {
 176                 compatible = "arm,cortex-a53","arm,armv8";
 177                 reg = <0x0 0x103>;
 178                 device_type = "cpu";
 179                 enable-method = "psci";
 180                 next-level-cache = <&A53_L2>;
 181                 clocks = <&scpi_dvfs 1>;
 182                 cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 183                 capacity-dmips-mhz = <578>;
 184         };
 185
 186         A57_L2: l2-cache0 {
 187                 compatible = "cache";
 188         };
 189
 190         A53_L2: l2-cache1 {
 191                 compatible = "cache";
 192         };
 193 };
 194
 195 Example 2 (ARM 32-bit, 4-cpu system, two clusters,
 196            cpus 0,1@1GHz, cpus 2,3@500MHz):
 197 capacities-dmips-mhz are scaled w.r.t. 2 (cpu@0 and cpu@1), this means that first
 198 cpu@0 and cpu@1 are twice fast than cpu@2 and cpu@3 (at the same frequency)
 199
 200 cpus {
 201         #address-cells = <1>;
 202         #size-cells = <0>;
 203
 204         cpu0: cpu@0 {
 205                 device_type = "cpu";
 206                 compatible = "arm,cortex-a15";
 207                 reg = <0>;
 208                 capacity-dmips-mhz = <2>;
 209         };
 210
 211         cpu1: cpu@1 {
 212                 device_type = "cpu";
 213                 compatible = "arm,cortex-a15";
 214                 reg = <1>;
 215                 capacity-dmips-mhz = <2>;
 216         };
 217
 218         cpu2: cpu@2 {
 219                 device_type = "cpu";
 220                 compatible = "arm,cortex-a15";
 221                 reg = <0x100>;
 222                 capacity-dmips-mhz = <1>;
 223         };
 224
 225         cpu3: cpu@3 {
 226                 device_type = "cpu";
 227                 compatible = "arm,cortex-a15";
 228                 reg = <0x101>;
 229                 capacity-dmips-mhz = <1>;
 230         };
 231 };
 232
 233 ===========================================
 234 5 - References
 235 ===========================================
 236
 237 [1] ARM Linux Kernel documentation - CPUs bindings
 238     Documentation/devicetree/bindings/arm/cpus.yaml