Documentation/devicetree/bindings/clock/imx8mm-clock.txt

   1 * Clock bindings for NXP i.MX8M Mini
   2
   3 Required properties:
   4 - compatible: Should be "fsl,imx8mm-ccm"
   5 - reg: Address and length of the register set
   6 - #clock-cells: Should be <1>
   7 - clocks: list of clock specifiers, must contain an entry for each required
   8           entry in clock-names
   9 - clock-names: should include the following entries:
  10     - "osc_32k"
  11     - "osc_24m"
  12     - "clk_ext1"
  13     - "clk_ext2"
  14     - "clk_ext3"
  15     - "clk_ext4"
  16
  17 clk: clock-controller@30380000 {
  18         compatible = "fsl,imx8mm-ccm";
  19         reg = <0x0 0x30380000 0x0 0x10000>;
  20         #clock-cells = <1>;
  21         clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
  22                  <&clk_ext3>, <&clk_ext4>;
  23         clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
  24                       "clk_ext3", "clk_ext4";
  25 };
  26
  27 The clock consumer should specify the desired clock by having the clock
  28 ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h
  29 for the full list of i.MX8M Mini clock IDs.