Documentation/devicetree/bindings/display/ilitek,ili9341.txt

   1 Ilitek ILI9341 display panels
   2
   3 This binding is for display panels using an Ilitek ILI9341 controller in SPI
   4 mode.
   5
   6 Required properties:
   7 - compatible:   "adafruit,yx240qv29", "ilitek,ili9341"
   8 - dc-gpios:     D/C pin
   9 - reset-gpios:  Reset pin
  10
  11 The node for this driver must be a child node of a SPI controller, hence
  12 all mandatory properties described in ../spi/spi-bus.txt must be specified.
  13
  14 Optional properties:
  15 - rotation:     panel rotation in degrees counter clockwise (0,90,180,270)
  16 - backlight:    phandle of the backlight device attached to the panel
  17
  18 Example:
  19         display@0{
  20                 compatible = "adafruit,yx240qv29", "ilitek,ili9341";
  21                 reg = <0>;
  22                 spi-max-frequency = <32000000>;
  23                 dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  24                 reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
  25                 rotation = <270>;
  26                 backlight = <&backlight>;
  27         };