Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt

   1 Lattice iCE40 FPGA Manager
   2
   3 Required properties:
   4 - compatible:           Should contain "lattice,ice40-fpga-mgr"
   5 - reg:                  SPI chip select
   6 - spi-max-frequency:    Maximum SPI frequency (>=1000000, <=25000000)
   7 - cdone-gpios:          GPIO input connected to CDONE pin
   8 - reset-gpios:          Active-low GPIO output connected to CRESET_B pin. Note
   9                         that unless the GPIO is held low during startup, the
  10                         FPGA will enter Master SPI mode and drive SCK with a
  11                         clock signal potentially jamming other devices on the
  12                         bus until the firmware is loaded.
  13
  14 Example:
  15         fpga: fpga@0 {
  16                 compatible = "lattice,ice40-fpga-mgr";
  17                 reg = <0>;
  18                 spi-max-frequency = <1000000>;
  19                 cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
  20                 reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  21         };