Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt

   1 Binding for the Synopsys HSDK reset controller
   2
   3 This binding uses the common reset binding[1].
   4
   5 [1] Documentation/devicetree/bindings/reset/reset.txt
   6
   7 Required properties:
   8 - compatible: should be "snps,hsdk-reset".
   9 - reg: should always contain 2 pairs address - length: first for reset
  10   configuration register and second for corresponding SW reset and status bits
  11   register.
  12 - #reset-cells: from common reset binding; Should always be set to 1.
  13
  14 Example:
  15         reset: reset@880 {
  16                 compatible = "snps,hsdk-reset";
  17                 #reset-cells = <1>;
  18                 reg = <0x8A0 0x4>, <0xFF0 0x4>;
  19         };
  20
  21 Specifying reset lines connected to IP modules:
  22         ethernet@.... {
  23                 ....
  24                 resets = <&reset HSDK_V1_ETH_RESET>;
  25                 ....
  26         };
  27
  28 The index could be found in <dt-bindings/reset/snps,hsdk-reset.h>