1 ------------------------------------------------------------------------------
2 T H E /proc F I L E S Y S T E M
3 ------------------------------------------------------------------------------
4 /proc/sys Terrehon Bowden <terrehon@pacbell.net> October 7 1999
5 Bodo Bauer <bb@ricochet.net>
7 2.4.x update Jorge Nerin <comandante@zaralinux.com> November 14 2000
8 move /proc/sys Shen Feng <shen@cn.fujitsu.com> April 1 2009
9 ------------------------------------------------------------------------------
10 Version 1.3 Kernel version 2.2.12
11 Kernel version 2.4.0-test11-pre4
12 ------------------------------------------------------------------------------
13 fixes/update part 1.1 Stefani Seibold <stefani@seibold.net> June 9 2009
19 0.1 Introduction/Credits
22 1 Collecting System Information
23 1.1 Process-Specific Subdirectories
25 1.3 IDE devices in /proc/ide
26 1.4 Networking info in /proc/net
28 1.6 Parallel port info in /proc/parport
29 1.7 TTY info in /proc/tty
30 1.8 Miscellaneous kernel statistics in /proc/stat
31 1.9 Ext4 file system parameters
33 2 Modifying System Parameters
35 3 Per-Process Parameters
36 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
38 3.2 /proc/<pid>/oom_score - Display current oom-killer score
39 3.3 /proc/<pid>/io - Display the IO accounting fields
40 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
41 3.5 /proc/<pid>/mountinfo - Information about mounts
42 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
43 3.7 /proc/<pid>/task/<tid>/children - Information about task children
44 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
45 3.9 /proc/<pid>/map_files - Information about memory mapped files
46 3.10 /proc/<pid>/timerslack_ns - Task timerslack value
47 3.11 /proc/<pid>/patch_state - Livepatch patch operation state
52 ------------------------------------------------------------------------------
54 ------------------------------------------------------------------------------
56 0.1 Introduction/Credits
57 ------------------------
59 This documentation is part of a soon (or so we hope) to be released book on
60 the SuSE Linux distribution. As there is no complete documentation for the
61 /proc file system and we've used many freely available sources to write these
62 chapters, it seems only fair to give the work back to the Linux community.
63 This work is based on the 2.2.* kernel version and the upcoming 2.4.*. I'm
64 afraid it's still far from complete, but we hope it will be useful. As far as
65 we know, it is the first 'all-in-one' document about the /proc file system. It
66 is focused on the Intel x86 hardware, so if you are looking for PPC, ARM,
67 SPARC, AXP, etc., features, you probably won't find what you are looking for.
68 It also only covers IPv4 networking, not IPv6 nor other protocols - sorry. But
69 additions and patches are welcome and will be added to this document if you
72 We'd like to thank Alan Cox, Rik van Riel, and Alexey Kuznetsov and a lot of
73 other people for help compiling this documentation. We'd also like to extend a
74 special thank you to Andi Kleen for documentation, which we relied on heavily
75 to create this document, as well as the additional information he provided.
76 Thanks to everybody else who contributed source or docs to the Linux kernel
77 and helped create a great piece of software... :)
79 If you have any comments, corrections or additions, please don't hesitate to
80 contact Bodo Bauer at bb@ricochet.net. We'll be happy to add them to this
83 The latest version of this document is available online at
84 http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/proc.html
86 If the above direction does not works for you, you could try the kernel
87 mailing list at linux-kernel@vger.kernel.org and/or try to reach me at
88 comandante@zaralinux.com.
93 We don't guarantee the correctness of this document, and if you come to us
94 complaining about how you screwed up your system because of incorrect
95 documentation, we won't feel responsible...
97 ------------------------------------------------------------------------------
98 CHAPTER 1: COLLECTING SYSTEM INFORMATION
99 ------------------------------------------------------------------------------
101 ------------------------------------------------------------------------------
103 ------------------------------------------------------------------------------
104 * Investigating the properties of the pseudo file system /proc and its
105 ability to provide information on the running Linux system
106 * Examining /proc's structure
107 * Uncovering various information about the kernel and the processes running
109 ------------------------------------------------------------------------------
112 The proc file system acts as an interface to internal data structures in the
113 kernel. It can be used to obtain information about the system and to change
114 certain kernel parameters at runtime (sysctl).
116 First, we'll take a look at the read-only parts of /proc. In Chapter 2, we
117 show you how you can use /proc/sys to change settings.
119 1.1 Process-Specific Subdirectories
120 -----------------------------------
122 The directory /proc contains (among other things) one subdirectory for each
123 process running on the system, which is named after the process ID (PID).
125 The link self points to the process reading the file system. Each process
126 subdirectory has the entries listed in Table 1-1.
129 Table 1-1: Process specific entries in /proc
130 ..............................................................................
132 clear_refs Clears page referenced bits shown in smaps output
133 cmdline Command line arguments
134 cpu Current and last cpu in which it was executed (2.4)(smp)
135 cwd Link to the current working directory
136 environ Values of environment variables
137 exe Link to the executable of this process
138 fd Directory, which contains all file descriptors
139 maps Memory maps to executables and library files (2.4)
140 mem Memory held by this process
141 root Link to the root directory of this process
143 statm Process memory status information
144 status Process status in human readable form
145 wchan Present with CONFIG_KALLSYMS=y: it shows the kernel function
146 symbol the task is blocked in - or "0" if not blocked.
148 stack Report full stack trace, enable via CONFIG_STACKTRACE
149 smaps an extension based on maps, showing the memory consumption of
150 each mapping and flags associated with it
151 numa_maps an extension based on maps, showing the memory locality and
152 binding policy as well as mem usage (in pages) of each mapping.
153 ..............................................................................
155 For example, to get the status information of a process, all you have to do is
156 read the file /proc/PID/status:
158 >cat /proc/self/status
187 SigPnd: 0000000000000000
188 ShdPnd: 0000000000000000
189 SigBlk: 0000000000000000
190 SigIgn: 0000000000000000
191 SigCgt: 0000000000000000
192 CapInh: 00000000fffffeff
193 CapPrm: 0000000000000000
194 CapEff: 0000000000000000
195 CapBnd: ffffffffffffffff
198 voluntary_ctxt_switches: 0
199 nonvoluntary_ctxt_switches: 1
201 This shows you nearly the same information you would get if you viewed it with
202 the ps command. In fact, ps uses the proc file system to obtain its
203 information. But you get a more detailed view of the process by reading the
204 file /proc/PID/status. It fields are described in table 1-2.
206 The statm file contains more detailed information about the process
207 memory usage. Its seven fields are explained in Table 1-3. The stat file
208 contains details information about the process itself. Its fields are
209 explained in Table 1-4.
211 (for SMP CONFIG users)
212 For making accounting scalable, RSS related information are handled in an
213 asynchronous manner and the value may not be very precise. To see a precise
214 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
215 It's slow but very precise.
217 Table 1-2: Contents of the status files (as of 4.8)
218 ..............................................................................
220 Name filename of the executable
221 Umask file mode creation mask
222 State state (R is running, S is sleeping, D is sleeping
223 in an uninterruptible wait, Z is zombie,
224 T is traced or stopped)
226 Ngid NUMA group ID (0 if none)
228 PPid process id of the parent process
229 TracerPid PID of process tracing this process (0 if not)
230 Uid Real, effective, saved set, and file system UIDs
231 Gid Real, effective, saved set, and file system GIDs
232 FDSize number of file descriptor slots currently allocated
233 Groups supplementary group list
234 NStgid descendant namespace thread group ID hierarchy
235 NSpid descendant namespace process ID hierarchy
236 NSpgid descendant namespace process group ID hierarchy
237 NSsid descendant namespace session ID hierarchy
238 VmPeak peak virtual memory size
239 VmSize total program size
240 VmLck locked memory size
241 VmPin pinned memory size
242 VmHWM peak resident set size ("high water mark")
243 VmRSS size of memory portions. It contains the three
244 following parts (VmRSS = RssAnon + RssFile + RssShmem)
245 RssAnon size of resident anonymous memory
246 RssFile size of resident file mappings
247 RssShmem size of resident shmem memory (includes SysV shm,
248 mapping of tmpfs and shared anonymous mappings)
249 VmData size of private data segments
250 VmStk size of stack segments
251 VmExe size of text segment
252 VmLib size of shared library code
253 VmPTE size of page table entries
254 VmSwap amount of swap used by anonymous private data
255 (shmem swap usage is not included)
256 HugetlbPages size of hugetlb memory portions
257 CoreDumping process's memory is currently being dumped
258 (killing the process may lead to a corrupted core)
259 Threads number of threads
260 SigQ number of signals queued/max. number for queue
261 SigPnd bitmap of pending signals for the thread
262 ShdPnd bitmap of shared pending signals for the process
263 SigBlk bitmap of blocked signals
264 SigIgn bitmap of ignored signals
265 SigCgt bitmap of caught signals
266 CapInh bitmap of inheritable capabilities
267 CapPrm bitmap of permitted capabilities
268 CapEff bitmap of effective capabilities
269 CapBnd bitmap of capabilities bounding set
270 NoNewPrivs no_new_privs, like prctl(PR_GET_NO_NEW_PRIV, ...)
271 Seccomp seccomp mode, like prctl(PR_GET_SECCOMP, ...)
272 Cpus_allowed mask of CPUs on which this process may run
273 Cpus_allowed_list Same as previous, but in "list format"
274 Mems_allowed mask of memory nodes allowed to this process
275 Mems_allowed_list Same as previous, but in "list format"
276 voluntary_ctxt_switches number of voluntary context switches
277 nonvoluntary_ctxt_switches number of non voluntary context switches
278 ..............................................................................
280 Table 1-3: Contents of the statm files (as of 2.6.8-rc3)
281 ..............................................................................
283 size total program size (pages) (same as VmSize in status)
284 resident size of memory portions (pages) (same as VmRSS in status)
285 shared number of pages that are shared (i.e. backed by a file, same
286 as RssFile+RssShmem in status)
287 trs number of pages that are 'code' (not including libs; broken,
288 includes data segment)
289 lrs number of pages of library (always 0 on 2.6)
290 drs number of pages of data/stack (including libs; broken,
291 includes library text)
292 dt number of dirty pages (always 0 on 2.6)
293 ..............................................................................
296 Table 1-4: Contents of the stat files (as of 2.6.30-rc7)
297 ..............................................................................
300 tcomm filename of the executable
301 state state (R is running, S is sleeping, D is sleeping in an
302 uninterruptible wait, Z is zombie, T is traced or stopped)
303 ppid process id of the parent process
304 pgrp pgrp of the process
306 tty_nr tty the process uses
307 tty_pgrp pgrp of the tty
309 min_flt number of minor faults
310 cmin_flt number of minor faults with child's
311 maj_flt number of major faults
312 cmaj_flt number of major faults with child's
313 utime user mode jiffies
314 stime kernel mode jiffies
315 cutime user mode jiffies with child's
316 cstime kernel mode jiffies with child's
317 priority priority level
319 num_threads number of threads
320 it_real_value (obsolete, always 0)
321 start_time time the process started after system boot
322 vsize virtual memory size
323 rss resident set memory size
324 rsslim current limit in bytes on the rss
325 start_code address above which program text can run
326 end_code address below which program text can run
327 start_stack address of the start of the main process stack
328 esp current value of ESP
329 eip current value of EIP
330 pending bitmap of pending signals
331 blocked bitmap of blocked signals
332 sigign bitmap of ignored signals
333 sigcatch bitmap of caught signals
334 0 (place holder, used to be the wchan address, use /proc/PID/wchan instead)
337 exit_signal signal to send to parent thread on exit
338 task_cpu which CPU the task is scheduled on
339 rt_priority realtime priority
340 policy scheduling policy (man sched_setscheduler)
341 blkio_ticks time spent waiting for block IO
342 gtime guest time of the task in jiffies
343 cgtime guest time of the task children in jiffies
344 start_data address above which program data+bss is placed
345 end_data address below which program data+bss is placed
346 start_brk address above which program heap can be expanded with brk()
347 arg_start address above which program command line is placed
348 arg_end address below which program command line is placed
349 env_start address above which program environment is placed
350 env_end address below which program environment is placed
351 exit_code the thread's exit_code in the form reported by the waitpid system call
352 ..............................................................................
354 The /proc/PID/maps file containing the currently mapped memory regions and
355 their access permissions.
359 address perms offset dev inode pathname
361 08048000-08049000 r-xp 00000000 03:00 8312 /opt/test
362 08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
363 0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
364 a7cb1000-a7cb2000 ---p 00000000 00:00 0
365 a7cb2000-a7eb2000 rw-p 00000000 00:00 0
366 a7eb2000-a7eb3000 ---p 00000000 00:00 0
367 a7eb3000-a7ed5000 rw-p 00000000 00:00 0
368 a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
369 a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6
370 a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6
371 a800b000-a800e000 rw-p 00000000 00:00 0
372 a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0
373 a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0
374 a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0
375 a8024000-a8027000 rw-p 00000000 00:00 0
376 a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2
377 a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2
378 a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2
379 aff35000-aff4a000 rw-p 00000000 00:00 0 [stack]
380 ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso]
382 where "address" is the address space in the process that it occupies, "perms"
383 is a set of permissions:
389 p = private (copy on write)
391 "offset" is the offset into the mapping, "dev" is the device (major:minor), and
392 "inode" is the inode on that device. 0 indicates that no inode is associated
393 with the memory region, as the case would be with BSS (uninitialized data).
394 The "pathname" shows the name associated file for this mapping. If the mapping
395 is not associated with a file:
397 [heap] = the heap of the program
398 [stack] = the stack of the main process
399 [vdso] = the "virtual dynamic shared object",
400 the kernel system call handler
402 or if empty, the mapping is anonymous.
404 The /proc/PID/smaps is an extension based on maps, showing the memory
405 consumption for each of the process's mappings. For each of mappings there
406 is a series of lines such as the following:
408 08048000-080bc000 r-xp 00000000 03:02 13130 /bin/bash
422 Private_Hugetlb: 0 kB
428 VmFlags: rd ex mr mw me dw
430 the first of these lines shows the same information as is displayed for the
431 mapping in /proc/PID/maps. The remaining lines show the size of the mapping
432 (size), the amount of the mapping that is currently resident in RAM (RSS), the
433 process' proportional share of this mapping (PSS), the number of clean and
434 dirty private pages in the mapping.
436 The "proportional set size" (PSS) of a process is the count of pages it has
437 in memory, where each page is divided by the number of processes sharing it.
438 So if a process has 1000 pages all to itself, and 1000 shared with one other
439 process, its PSS will be 1500.
440 Note that even a page which is part of a MAP_SHARED mapping, but has only
441 a single pte mapped, i.e. is currently used by only one process, is accounted
442 as private and not as shared.
443 "Referenced" indicates the amount of memory currently marked as referenced or
445 "Anonymous" shows the amount of memory that does not belong to any file. Even
446 a mapping associated with a file may contain anonymous pages: when MAP_PRIVATE
447 and a page is modified, the file page is replaced by a private anonymous copy.
448 "LazyFree" shows the amount of memory which is marked by madvise(MADV_FREE).
449 The memory isn't freed immediately with madvise(). It's freed in memory
450 pressure if the memory is clean. Please note that the printed value might
451 be lower than the real value due to optimizations used in the current
452 implementation. If this is not desirable please file a bug report.
453 "AnonHugePages" shows the ammount of memory backed by transparent hugepage.
454 "ShmemPmdMapped" shows the ammount of shared (shmem/tmpfs) memory backed by
456 "Shared_Hugetlb" and "Private_Hugetlb" show the ammounts of memory backed by
457 hugetlbfs page which is *not* counted in "RSS" or "PSS" field for historical
458 reasons. And these are not included in {Shared,Private}_{Clean,Dirty} field.
459 "Swap" shows how much would-be-anonymous memory is also used, but out on swap.
460 For shmem mappings, "Swap" includes also the size of the mapped (and not
461 replaced by copy-on-write) part of the underlying shmem object out on swap.
462 "SwapPss" shows proportional swap share of this mapping. Unlike "Swap", this
463 does not take into account swapped out page of underlying shmem objects.
464 "Locked" indicates whether the mapping is locked in memory or not.
466 "VmFlags" field deserves a separate description. This member represents the kernel
467 flags associated with the particular virtual memory area in two letter encoded
468 manner. The codes are the following:
477 gd - stack segment growns down
479 dw - disabled write to the mapped file
480 lo - pages are locked in memory
481 io - memory mapped I/O area
482 sr - sequential read advise provided
483 rr - random read advise provided
484 dc - do not copy area on fork
485 de - do not expand area on remapping
486 ac - area is accountable
487 nr - swap space is not reserved for the area
488 ht - area uses huge tlb pages
489 ar - architecture specific flag
490 dd - do not include area into core dump
493 hg - huge page advise flag
494 nh - no-huge page advise flag
495 mg - mergable advise flag
497 Note that there is no guarantee that every flag and associated mnemonic will
498 be present in all further kernel releases. Things get changed, the flags may
499 be vanished or the reverse -- new added. Interpretation of their meaning
500 might change in future as well. So each consumer of these flags has to
501 follow each specific kernel version for the exact semantic.
503 This file is only present if the CONFIG_MMU kernel configuration option is
506 Note: reading /proc/PID/maps or /proc/PID/smaps is inherently racy (consistent
507 output can be achieved only in the single read call).
508 This typically manifests when doing partial reads of these files while the
509 memory map is being modified. Despite the races, we do provide the following
512 1) The mapped addresses never go backwards, which implies no two
513 regions will ever overlap.
514 2) If there is something at a given vaddr during the entirety of the
515 life of the smaps/maps walk, there will be some output for it.
518 The /proc/PID/clear_refs is used to reset the PG_Referenced and ACCESSED/YOUNG
519 bits on both physical and virtual pages associated with a process, and the
520 soft-dirty bit on pte (see Documentation/admin-guide/mm/soft-dirty.rst
522 To clear the bits for all the pages associated with the process
523 > echo 1 > /proc/PID/clear_refs
525 To clear the bits for the anonymous pages associated with the process
526 > echo 2 > /proc/PID/clear_refs
528 To clear the bits for the file mapped pages associated with the process
529 > echo 3 > /proc/PID/clear_refs
531 To clear the soft-dirty bit
532 > echo 4 > /proc/PID/clear_refs
534 To reset the peak resident set size ("high water mark") to the process's
536 > echo 5 > /proc/PID/clear_refs
538 Any other value written to /proc/PID/clear_refs will have no effect.
540 The /proc/pid/pagemap gives the PFN, which can be used to find the pageflags
541 using /proc/kpageflags and number of times a page is mapped using
542 /proc/kpagecount. For detailed explanation, see
543 Documentation/admin-guide/mm/pagemap.rst.
545 The /proc/pid/numa_maps is an extension based on maps, showing the memory
546 locality and binding policy, as well as the memory usage (in pages) of
547 each mapping. The output follows a general format where mapping details get
548 summarized separated by blank spaces, one mapping per each file line:
550 address policy mapping details
552 00400000 default file=/usr/local/bin/app mapped=1 active=0 N3=1 kernelpagesize_kB=4
553 00600000 default file=/usr/local/bin/app anon=1 dirty=1 N3=1 kernelpagesize_kB=4
554 3206000000 default file=/lib64/ld-2.12.so mapped=26 mapmax=6 N0=24 N3=2 kernelpagesize_kB=4
555 320621f000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
556 3206220000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
557 3206221000 default anon=1 dirty=1 N3=1 kernelpagesize_kB=4
558 3206800000 default file=/lib64/libc-2.12.so mapped=59 mapmax=21 active=55 N0=41 N3=18 kernelpagesize_kB=4
559 320698b000 default file=/lib64/libc-2.12.so
560 3206b8a000 default file=/lib64/libc-2.12.so anon=2 dirty=2 N3=2 kernelpagesize_kB=4
561 3206b8e000 default file=/lib64/libc-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
562 3206b8f000 default anon=3 dirty=3 active=1 N3=3 kernelpagesize_kB=4
563 7f4dc10a2000 default anon=3 dirty=3 N3=3 kernelpagesize_kB=4
564 7f4dc10b4000 default anon=2 dirty=2 active=1 N3=2 kernelpagesize_kB=4
565 7f4dc1200000 default file=/anon_hugepage\040(deleted) huge anon=1 dirty=1 N3=1 kernelpagesize_kB=2048
566 7fff335f0000 default stack anon=3 dirty=3 N3=3 kernelpagesize_kB=4
567 7fff3369d000 default mapped=1 mapmax=35 active=0 N3=1 kernelpagesize_kB=4
570 "address" is the starting address for the mapping;
571 "policy" reports the NUMA memory policy set for the mapping (see Documentation/admin-guide/mm/numa_memory_policy.rst);
572 "mapping details" summarizes mapping data such as mapping type, page usage counters,
573 node locality page counters (N0 == node0, N1 == node1, ...) and the kernel page
574 size, in KB, that is backing the mapping up.
579 Similar to the process entries, the kernel data files give information about
580 the running kernel. The files used to obtain this information are contained in
581 /proc and are listed in Table 1-5. Not all of these will be present in your
582 system. It depends on the kernel configuration and the loaded modules, which
583 files are there, and which are missing.
585 Table 1-5: Kernel info in /proc
586 ..............................................................................
588 apm Advanced power management info
589 buddyinfo Kernel memory allocator information (see text) (2.5)
590 bus Directory containing bus specific information
591 cmdline Kernel command line
592 cpuinfo Info about the CPU
593 devices Available devices (block and character)
594 dma Used DMS channels
595 filesystems Supported filesystems
596 driver Various drivers grouped here, currently rtc (2.4)
597 execdomains Execdomains, related to security (2.4)
598 fb Frame Buffer devices (2.4)
599 fs File system parameters, currently nfs/exports (2.4)
600 ide Directory containing info about the IDE subsystem
601 interrupts Interrupt usage
602 iomem Memory map (2.4)
603 ioports I/O port usage
604 irq Masks for irq to cpu affinity (2.4)(smp?)
605 isapnp ISA PnP (Plug&Play) Info (2.4)
606 kcore Kernel core image (can be ELF or A.OUT(deprecated in 2.4))
608 ksyms Kernel symbol table
609 loadavg Load average of last 1, 5 & 15 minutes
613 modules List of loaded modules
614 mounts Mounted filesystems
615 net Networking info (see text)
616 pagetypeinfo Additional page allocator information (see text) (2.5)
617 partitions Table of partitions known to the system
618 pci Deprecated info of PCI bus (new way -> /proc/bus/pci/,
619 decoupled by lspci (2.4)
621 scsi SCSI info (see text)
622 slabinfo Slab pool info
623 softirqs softirq usage
624 stat Overall statistics
625 swaps Swap space utilization
627 sysvipc Info of SysVIPC Resources (msg, sem, shm) (2.4)
628 tty Info of tty drivers
629 uptime Wall clock since boot, combined idle time of all cpus
630 version Kernel version
631 video bttv info of video resources (2.4)
632 vmallocinfo Show vmalloced areas
633 ..............................................................................
635 You can, for example, check which interrupts are currently in use and what
636 they are used for by looking in the file /proc/interrupts:
638 > cat /proc/interrupts
640 0: 8728810 XT-PIC timer
641 1: 895 XT-PIC keyboard
643 3: 531695 XT-PIC aha152x
644 4: 2014133 XT-PIC serial
645 5: 44401 XT-PIC pcnet_cs
648 12: 182918 XT-PIC PS/2 Mouse
650 14: 1232265 XT-PIC ide0
654 In 2.4.* a couple of lines where added to this file LOC & ERR (this time is the
655 output of a SMP machine):
657 > cat /proc/interrupts
660 0: 1243498 1214548 IO-APIC-edge timer
661 1: 8949 8958 IO-APIC-edge keyboard
662 2: 0 0 XT-PIC cascade
663 5: 11286 10161 IO-APIC-edge soundblaster
664 8: 1 0 IO-APIC-edge rtc
665 9: 27422 27407 IO-APIC-edge 3c503
666 12: 113645 113873 IO-APIC-edge PS/2 Mouse
668 14: 22491 24012 IO-APIC-edge ide0
669 15: 2183 2415 IO-APIC-edge ide1
670 17: 30564 30414 IO-APIC-level eth0
671 18: 177 164 IO-APIC-level bttv
676 NMI is incremented in this case because every timer interrupt generates a NMI
677 (Non Maskable Interrupt) which is used by the NMI Watchdog to detect lockups.
679 LOC is the local interrupt counter of the internal APIC of every CPU.
681 ERR is incremented in the case of errors in the IO-APIC bus (the bus that
682 connects the CPUs in a SMP system. This means that an error has been detected,
683 the IO-APIC automatically retry the transmission, so it should not be a big
684 problem, but you should read the SMP-FAQ.
686 In 2.6.2* /proc/interrupts was expanded again. This time the goal was for
687 /proc/interrupts to display every IRQ vector in use by the system, not
688 just those considered 'most important'. The new vectors are:
690 THR -- interrupt raised when a machine check threshold counter
691 (typically counting ECC corrected errors of memory or cache) exceeds
692 a configurable threshold. Only available on some systems.
694 TRM -- a thermal event interrupt occurs when a temperature threshold
695 has been exceeded for the CPU. This interrupt may also be generated
696 when the temperature drops back to normal.
698 SPU -- a spurious interrupt is some interrupt that was raised then lowered
699 by some IO device before it could be fully processed by the APIC. Hence
700 the APIC sees the interrupt but does not know what device it came from.
701 For this case the APIC will generate the interrupt with a IRQ vector
702 of 0xff. This might also be generated by chipset bugs.
704 RES, CAL, TLB -- rescheduling, call and TLB flush interrupts are
705 sent from one CPU to another per the needs of the OS. Typically,
706 their statistics are used by kernel developers and interested users to
707 determine the occurrence of interrupts of the given type.
709 The above IRQ vectors are displayed only when relevant. For example,
710 the threshold vector does not exist on x86_64 platforms. Others are
711 suppressed when the system is a uniprocessor. As of this writing, only
712 i386 and x86_64 platforms support the new IRQ vector displays.
714 Of some interest is the introduction of the /proc/irq directory to 2.4.
715 It could be used to set IRQ to CPU affinity, this means that you can "hook" an
716 IRQ to only one CPU, or to exclude a CPU of handling IRQs. The contents of the
717 irq subdir is one subdir for each IRQ, and two files; default_smp_affinity and
722 0 10 12 14 16 18 2 4 6 8 prof_cpu_mask
723 1 11 13 15 17 19 3 5 7 9 default_smp_affinity
727 smp_affinity is a bitmask, in which you can specify which CPUs can handle the
728 IRQ, you can set it by doing:
730 > echo 1 > /proc/irq/10/smp_affinity
732 This means that only the first CPU will handle the IRQ, but you can also echo
733 5 which means that only the first and third CPU can handle the IRQ.
735 The contents of each smp_affinity file is the same by default:
737 > cat /proc/irq/0/smp_affinity
740 There is an alternate interface, smp_affinity_list which allows specifying
741 a cpu range instead of a bitmask:
743 > cat /proc/irq/0/smp_affinity_list
746 The default_smp_affinity mask applies to all non-active IRQs, which are the
747 IRQs which have not yet been allocated/activated, and hence which lack a
748 /proc/irq/[0-9]* directory.
750 The node file on an SMP system shows the node to which the device using the IRQ
751 reports itself as being attached. This hardware locality information does not
752 include information about any possible driver locality preference.
754 prof_cpu_mask specifies which CPUs are to be profiled by the system wide
755 profiler. Default value is ffffffff (all cpus if there are only 32 of them).
757 The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
758 between all the CPUs which are allowed to handle it. As usual the kernel has
759 more info than you and does a better job than you, so the defaults are the
760 best choice for almost everyone. [Note this applies only to those IO-APIC's
761 that support "Round Robin" interrupt distribution.]
763 There are three more important subdirectories in /proc: net, scsi, and sys.
764 The general rule is that the contents, or even the existence of these
765 directories, depend on your kernel configuration. If SCSI is not enabled, the
766 directory scsi may not exist. The same is true with the net, which is there
767 only when networking support is present in the running kernel.
769 The slabinfo file gives information about memory usage at the slab level.
770 Linux uses slab pools for memory management above page level in version 2.2.
771 Commonly used objects have their own slab pool (such as network buffers,
772 directory cache, and so on).
774 ..............................................................................
776 > cat /proc/buddyinfo
778 Node 0, zone DMA 0 4 5 4 4 3 ...
779 Node 0, zone Normal 1 0 0 1 101 8 ...
780 Node 0, zone HighMem 2 0 0 1 1 0 ...
782 External fragmentation is a problem under some workloads, and buddyinfo is a
783 useful tool for helping diagnose these problems. Buddyinfo will give you a
784 clue as to how big an area you can safely allocate, or why a previous
787 Each column represents the number of pages of a certain order which are
788 available. In this case, there are 0 chunks of 2^0*PAGE_SIZE available in
789 ZONE_DMA, 4 chunks of 2^1*PAGE_SIZE in ZONE_DMA, 101 chunks of 2^4*PAGE_SIZE
790 available in ZONE_NORMAL, etc...
792 More information relevant to external fragmentation can be found in
795 > cat /proc/pagetypeinfo
799 Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10
800 Node 0, zone DMA, type Unmovable 0 0 0 1 1 1 1 1 1 1 0
801 Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
802 Node 0, zone DMA, type Movable 1 1 2 1 2 1 1 0 1 0 2
803 Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 1 0
804 Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0
805 Node 0, zone DMA32, type Unmovable 103 54 77 1 1 1 11 8 7 1 9
806 Node 0, zone DMA32, type Reclaimable 0 0 2 1 0 0 0 0 1 0 0
807 Node 0, zone DMA32, type Movable 169 152 113 91 77 54 39 13 6 1 452
808 Node 0, zone DMA32, type Reserve 1 2 2 2 2 0 1 1 1 1 0
809 Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0
811 Number of blocks type Unmovable Reclaimable Movable Reserve Isolate
812 Node 0, zone DMA 2 0 5 1 0
813 Node 0, zone DMA32 41 6 967 2 0
815 Fragmentation avoidance in the kernel works by grouping pages of different
816 migrate types into the same contiguous regions of memory called page blocks.
817 A page block is typically the size of the default hugepage size e.g. 2MB on
818 X86-64. By keeping pages grouped based on their ability to move, the kernel
819 can reclaim pages within a page block to satisfy a high-order allocation.
821 The pagetypinfo begins with information on the size of a page block. It
822 then gives the same type of information as buddyinfo except broken down
823 by migrate-type and finishes with details on how many page blocks of each
826 If min_free_kbytes has been tuned correctly (recommendations made by hugeadm
827 from libhugetlbfs https://github.com/libhugetlbfs/libhugetlbfs/), one can
828 make an estimate of the likely number of huge pages that can be allocated
829 at a given point in time. All the "Movable" blocks should be allocatable
830 unless memory has been mlock()'d. Some of the Reclaimable blocks should
831 also be allocatable although a lot of filesystem metadata may have to be
832 reclaimed to achieve this.
834 ..............................................................................
838 Provides information about distribution and utilization of memory. This
839 varies by architecture and compile options. The following is from a
840 16GB PIII, which has highmem enabled. You may not have all of these fields.
844 MemTotal: 16344972 kB
846 MemAvailable: 14836172 kB
852 HighTotal: 15597528 kB
853 HighFree: 13629632 kB
863 KReclaimable: 168048 kB
865 SReclaimable: 159856 kB
866 SUnreclaim: 124508 kB
871 CommitLimit: 7669796 kB
872 Committed_AS: 100056 kB
873 VmallocTotal: 112216 kB
875 VmallocChunk: 111088 kB
877 HardwareCorrupted: 0 kB
878 AnonHugePages: 49152 kB
883 MemTotal: Total usable ram (i.e. physical ram minus a few reserved
884 bits and the kernel binary code)
885 MemFree: The sum of LowFree+HighFree
886 MemAvailable: An estimate of how much memory is available for starting new
887 applications, without swapping. Calculated from MemFree,
888 SReclaimable, the size of the file LRU lists, and the low
889 watermarks in each zone.
890 The estimate takes into account that the system needs some
891 page cache to function well, and that not all reclaimable
892 slab will be reclaimable, due to items being in use. The
893 impact of those factors will vary from system to system.
894 Buffers: Relatively temporary storage for raw disk blocks
895 shouldn't get tremendously large (20MB or so)
896 Cached: in-memory cache for files read from the disk (the
897 pagecache). Doesn't include SwapCached
898 SwapCached: Memory that once was swapped out, is swapped back in but
899 still also is in the swapfile (if memory is needed it
900 doesn't need to be swapped out AGAIN because it is already
901 in the swapfile. This saves I/O)
902 Active: Memory that has been used more recently and usually not
903 reclaimed unless absolutely necessary.
904 Inactive: Memory which has been less recently used. It is more
905 eligible to be reclaimed for other purposes
907 HighFree: Highmem is all memory above ~860MB of physical memory
908 Highmem areas are for use by userspace programs, or
909 for the pagecache. The kernel must use tricks to access
910 this memory, making it slower to access than lowmem.
912 LowFree: Lowmem is memory which can be used for everything that
913 highmem can be used for, but it is also available for the
914 kernel's use for its own data structures. Among many
915 other things, it is where everything from the Slab is
916 allocated. Bad things happen when you're out of lowmem.
917 SwapTotal: total amount of swap space available
918 SwapFree: Memory which has been evicted from RAM, and is temporarily
920 Dirty: Memory which is waiting to get written back to the disk
921 Writeback: Memory which is actively being written back to the disk
922 AnonPages: Non-file backed pages mapped into userspace page tables
923 HardwareCorrupted: The amount of RAM/memory in KB, the kernel identifies as
925 AnonHugePages: Non-file backed huge pages mapped into userspace page tables
926 Mapped: files which have been mmaped, such as libraries
927 Shmem: Total memory used by shared memory (shmem) and tmpfs
928 ShmemHugePages: Memory used by shared memory (shmem) and tmpfs allocated
930 ShmemPmdMapped: Shared memory mapped into userspace with huge pages
931 KReclaimable: Kernel allocations that the kernel will attempt to reclaim
932 under memory pressure. Includes SReclaimable (below), and other
933 direct allocations with a shrinker.
934 Slab: in-kernel data structures cache
935 SReclaimable: Part of Slab, that might be reclaimed, such as caches
936 SUnreclaim: Part of Slab, that cannot be reclaimed on memory pressure
937 PageTables: amount of memory dedicated to the lowest level of page
939 NFS_Unstable: NFS pages sent to the server, but not yet committed to stable
941 Bounce: Memory used for block device "bounce buffers"
942 WritebackTmp: Memory used by FUSE for temporary writeback buffers
943 CommitLimit: Based on the overcommit ratio ('vm.overcommit_ratio'),
944 this is the total amount of memory currently available to
945 be allocated on the system. This limit is only adhered to
946 if strict overcommit accounting is enabled (mode 2 in
947 'vm.overcommit_memory').
948 The CommitLimit is calculated with the following formula:
949 CommitLimit = ([total RAM pages] - [total huge TLB pages]) *
950 overcommit_ratio / 100 + [total swap pages]
951 For example, on a system with 1G of physical RAM and 7G
952 of swap with a `vm.overcommit_ratio` of 30 it would
953 yield a CommitLimit of 7.3G.
954 For more details, see the memory overcommit documentation
955 in vm/overcommit-accounting.
956 Committed_AS: The amount of memory presently allocated on the system.
957 The committed memory is a sum of all of the memory which
958 has been allocated by processes, even if it has not been
959 "used" by them as of yet. A process which malloc()'s 1G
960 of memory, but only touches 300M of it will show up as
961 using 1G. This 1G is memory which has been "committed" to
962 by the VM and can be used at any time by the allocating
963 application. With strict overcommit enabled on the system
964 (mode 2 in 'vm.overcommit_memory'),allocations which would
965 exceed the CommitLimit (detailed above) will not be permitted.
966 This is useful if one needs to guarantee that processes will
967 not fail due to lack of memory once that memory has been
968 successfully allocated.
969 VmallocTotal: total size of vmalloc memory area
970 VmallocUsed: amount of vmalloc area which is used
971 VmallocChunk: largest contiguous block of vmalloc area which is free
972 Percpu: Memory allocated to the percpu allocator used to back percpu
973 allocations. This stat excludes the cost of metadata.
975 ..............................................................................
979 Provides information about vmalloced/vmaped areas. One line per area,
980 containing the virtual address range of the area, size in bytes,
981 caller information of the creator, and optional information depending
982 on the kind of area :
984 pages=nr number of pages
985 phys=addr if a physical address was specified
986 ioremap I/O mapping (ioremap() and friends)
987 vmalloc vmalloc() area
990 vpages buffer for pages pointers was vmalloced (huge area)
991 N<node>=nr (Only on NUMA kernels)
992 Number of pages allocated on memory node <node>
994 > cat /proc/vmallocinfo
995 0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ...
996 /0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
997 0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ...
998 /0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
999 0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f...
1000 phys=7fee8000 ioremap
1001 0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f...
1002 phys=7fee7000 ioremap
1003 0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210
1004 0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ...
1005 /0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
1006 0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ...
1007 pages=2 vmalloc N1=2
1008 0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ...
1009 /0x130 [x_tables] pages=4 vmalloc N0=4
1010 0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ...
1011 pages=14 vmalloc N2=14
1012 0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ...
1013 pages=4 vmalloc N1=4
1014 0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ...
1015 pages=2 vmalloc N1=2
1016 0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ...
1017 pages=10 vmalloc N0=10
1019 ..............................................................................
1023 Provides counts of softirq handlers serviced since boot time, for each cpu.
1025 > cat /proc/softirqs
1028 TIMER: 27166 27120 27097 27034
1033 SCHED: 27035 26983 26971 26746
1035 RCU: 1678 1769 2178 2250
1038 1.3 IDE devices in /proc/ide
1039 ----------------------------
1041 The subdirectory /proc/ide contains information about all IDE devices of which
1042 the kernel is aware. There is one subdirectory for each IDE controller, the
1043 file drivers and a link for each IDE device, pointing to the device directory
1044 in the controller specific subtree.
1046 The file drivers contains general information about the drivers used for the
1049 > cat /proc/ide/drivers
1050 ide-cdrom version 4.53
1051 ide-disk version 1.08
1053 More detailed information can be found in the controller specific
1054 subdirectories. These are named ide0, ide1 and so on. Each of these
1055 directories contains the files shown in table 1-6.
1058 Table 1-6: IDE controller info in /proc/ide/ide?
1059 ..............................................................................
1061 channel IDE channel (0 or 1)
1062 config Configuration (only for PCI/IDE bridge)
1064 model Type/Chipset of IDE controller
1065 ..............................................................................
1067 Each device connected to a controller has a separate subdirectory in the
1068 controllers directory. The files listed in table 1-7 are contained in these
1072 Table 1-7: IDE device information
1073 ..............................................................................
1076 capacity Capacity of the medium (in 512Byte blocks)
1077 driver driver and version
1078 geometry physical and logical geometry
1079 identify device identify block
1081 model device identifier
1082 settings device setup
1083 smart_thresholds IDE disk management thresholds
1084 smart_values IDE disk management values
1085 ..............................................................................
1087 The most interesting file is settings. This file contains a nice overview of
1088 the drive parameters:
1090 # cat /proc/ide/ide0/hda/settings
1091 name value min max mode
1092 ---- ----- --- --- ----
1093 bios_cyl 526 0 65535 rw
1094 bios_head 255 0 255 rw
1095 bios_sect 63 0 63 rw
1096 breada_readahead 4 0 127 rw
1098 file_readahead 72 0 2097151 rw
1100 keepsettings 0 0 1 rw
1101 max_kb_per_request 122 1 127 rw
1105 pio_mode write-only 0 255 w
1111 1.4 Networking info in /proc/net
1112 --------------------------------
1114 The subdirectory /proc/net follows the usual pattern. Table 1-8 shows the
1115 additional values you get for IP version 6 if you configure the kernel to
1116 support this. Table 1-9 lists the files and their meaning.
1119 Table 1-8: IPv6 info in /proc/net
1120 ..............................................................................
1122 udp6 UDP sockets (IPv6)
1123 tcp6 TCP sockets (IPv6)
1124 raw6 Raw device statistics (IPv6)
1125 igmp6 IP multicast addresses, which this host joined (IPv6)
1126 if_inet6 List of IPv6 interface addresses
1127 ipv6_route Kernel routing table for IPv6
1128 rt6_stats Global IPv6 routing tables statistics
1129 sockstat6 Socket statistics (IPv6)
1130 snmp6 Snmp data (IPv6)
1131 ..............................................................................
1134 Table 1-9: Network info in /proc/net
1135 ..............................................................................
1137 arp Kernel ARP table
1138 dev network devices with statistics
1139 dev_mcast the Layer2 multicast groups a device is listening too
1140 (interface index, label, number of references, number of bound
1142 dev_stat network device status
1143 ip_fwchains Firewall chain linkage
1144 ip_fwnames Firewall chain names
1145 ip_masq Directory containing the masquerading tables
1146 ip_masquerade Major masquerading table
1147 netstat Network statistics
1148 raw raw device statistics
1149 route Kernel routing table
1150 rpc Directory containing rpc info
1151 rt_cache Routing cache
1153 sockstat Socket statistics
1156 unix UNIX domain sockets
1157 wireless Wireless interface data (Wavelan etc)
1158 igmp IP multicast addresses, which this host joined
1159 psched Global packet scheduler parameters.
1160 netlink List of PF_NETLINK sockets
1161 ip_mr_vifs List of multicast virtual interfaces
1162 ip_mr_cache List of multicast routing cache
1163 ..............................................................................
1165 You can use this information to see which network devices are available in
1166 your system and how much traffic was routed over those devices:
1169 Inter-|Receive |[...
1170 face |bytes packets errs drop fifo frame compressed multicast|[...
1171 lo: 908188 5596 0 0 0 0 0 0 [...
1172 ppp0:15475140 20721 410 0 0 410 0 0 [...
1173 eth0: 614530 7085 0 0 0 0 0 1 [...
1176 ...] bytes packets errs drop fifo colls carrier compressed
1177 ...] 908188 5596 0 0 0 0 0 0
1178 ...] 1375103 17405 0 0 0 0 0 0
1179 ...] 1703981 5535 0 0 0 3 0 0
1181 In addition, each Channel Bond interface has its own directory. For
1182 example, the bond0 device will have a directory called /proc/net/bond0/.
1183 It will contain information that is specific to that bond, such as the
1184 current slaves of the bond, the link status of the slaves, and how
1185 many times the slaves link has failed.
1190 If you have a SCSI host adapter in your system, you'll find a subdirectory
1191 named after the driver for this adapter in /proc/scsi. You'll also see a list
1192 of all recognized SCSI devices in /proc/scsi:
1194 >cat /proc/scsi/scsi
1196 Host: scsi0 Channel: 00 Id: 00 Lun: 00
1197 Vendor: IBM Model: DGHS09U Rev: 03E0
1198 Type: Direct-Access ANSI SCSI revision: 03
1199 Host: scsi0 Channel: 00 Id: 06 Lun: 00
1200 Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.04
1201 Type: CD-ROM ANSI SCSI revision: 02
1204 The directory named after the driver has one file for each adapter found in
1205 the system. These files contain information about the controller, including
1206 the used IRQ and the IO address range. The amount of information shown is
1207 dependent on the adapter you use. The example shows the output for an Adaptec
1208 AHA-2940 SCSI adapter:
1210 > cat /proc/scsi/aic7xxx/0
1212 Adaptec AIC7xxx driver version: 5.1.19/3.2.4
1214 TCQ Enabled By Default : Disabled
1215 AIC7XXX_PROC_STATS : Disabled
1216 AIC7XXX_RESET_DELAY : 5
1217 Adapter Configuration:
1218 SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
1219 Ultra Wide Controller
1220 PCI MMAPed I/O Base: 0xeb001000
1221 Adapter SEEPROM Config: SEEPROM found and used.
1222 Adaptec SCSI BIOS: Enabled
1224 SCBs: Active 0, Max Active 2,
1225 Allocated 15, HW 16, Page 255
1227 BIOS Control Word: 0x18b6
1228 Adapter Control Word: 0x005b
1229 Extended Translation: Enabled
1230 Disconnect Enable Flags: 0xffff
1231 Ultra Enable Flags: 0x0001
1232 Tag Queue Enable Flags: 0x0000
1233 Ordered Queue Tag Flags: 0x0000
1234 Default Tag Queue Depth: 8
1235 Tagged Queue By Device array for aic7xxx host instance 0:
1236 {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
1237 Actual queue depth per device for aic7xxx host instance 0:
1238 {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
1241 Device using Wide/Sync transfers at 40.0 MByte/sec, offset 8
1242 Transinfo settings: current(12/8/1/0), goal(12/8/1/0), user(12/15/1/0)
1243 Total transfers 160151 (74577 reads and 85574 writes)
1245 Device using Narrow/Sync transfers at 5.0 MByte/sec, offset 15
1246 Transinfo settings: current(50/15/0/0), goal(50/15/0/0), user(50/15/0/0)
1247 Total transfers 0 (0 reads and 0 writes)
1250 1.6 Parallel port info in /proc/parport
1251 ---------------------------------------
1253 The directory /proc/parport contains information about the parallel ports of
1254 your system. It has one subdirectory for each port, named after the port
1257 These directories contain the four files shown in Table 1-10.
1260 Table 1-10: Files in /proc/parport
1261 ..............................................................................
1263 autoprobe Any IEEE-1284 device ID information that has been acquired.
1264 devices list of the device drivers using that port. A + will appear by the
1265 name of the device currently using the port (it might not appear
1267 hardware Parallel port's base address, IRQ line and DMA channel.
1268 irq IRQ that parport is using for that port. This is in a separate
1269 file to allow you to alter it by writing a new value in (IRQ
1271 ..............................................................................
1273 1.7 TTY info in /proc/tty
1274 -------------------------
1276 Information about the available and actually used tty's can be found in the
1277 directory /proc/tty.You'll find entries for drivers and line disciplines in
1278 this directory, as shown in Table 1-11.
1281 Table 1-11: Files in /proc/tty
1282 ..............................................................................
1284 drivers list of drivers and their usage
1285 ldiscs registered line disciplines
1286 driver/serial usage statistic and status of single tty lines
1287 ..............................................................................
1289 To see which tty's are currently in use, you can simply look into the file
1292 > cat /proc/tty/drivers
1293 pty_slave /dev/pts 136 0-255 pty:slave
1294 pty_master /dev/ptm 128 0-255 pty:master
1295 pty_slave /dev/ttyp 3 0-255 pty:slave
1296 pty_master /dev/pty 2 0-255 pty:master
1297 serial /dev/cua 5 64-67 serial:callout
1298 serial /dev/ttyS 4 64-67 serial
1299 /dev/tty0 /dev/tty0 4 0 system:vtmaster
1300 /dev/ptmx /dev/ptmx 5 2 system
1301 /dev/console /dev/console 5 1 system:console
1302 /dev/tty /dev/tty 5 0 system:/dev/tty
1303 unknown /dev/tty 4 1-63 console
1306 1.8 Miscellaneous kernel statistics in /proc/stat
1307 -------------------------------------------------
1309 Various pieces of information about kernel activity are available in the
1310 /proc/stat file. All of the numbers reported in this file are aggregates
1311 since the system first booted. For a quick look, simply cat the file:
1314 cpu 2255 34 2290 22625563 6290 127 456 0 0 0
1315 cpu0 1132 34 1441 11311718 3675 127 438 0 0 0
1316 cpu1 1123 0 849 11313845 2614 0 18 0 0 0
1317 intr 114930548 113199788 3 0 5 263 0 4 [... lots more numbers ...]
1323 softirq 183433 0 21755 12 39 1137 231 21459 2263
1325 The very first "cpu" line aggregates the numbers in all of the other "cpuN"
1326 lines. These numbers identify the amount of time the CPU has spent performing
1327 different kinds of work. Time units are in USER_HZ (typically hundredths of a
1328 second). The meanings of the columns are as follows, from left to right:
1330 - user: normal processes executing in user mode
1331 - nice: niced processes executing in user mode
1332 - system: processes executing in kernel mode
1333 - idle: twiddling thumbs
1334 - iowait: In a word, iowait stands for waiting for I/O to complete. But there
1335 are several problems:
1336 1. Cpu will not wait for I/O to complete, iowait is the time that a task is
1337 waiting for I/O to complete. When cpu goes into idle state for
1338 outstanding task io, another task will be scheduled on this CPU.
1339 2. In a multi-core CPU, the task waiting for I/O to complete is not running
1340 on any CPU, so the iowait of each CPU is difficult to calculate.
1341 3. The value of iowait field in /proc/stat will decrease in certain
1343 So, the iowait is not reliable by reading from /proc/stat.
1344 - irq: servicing interrupts
1345 - softirq: servicing softirqs
1346 - steal: involuntary wait
1347 - guest: running a normal guest
1348 - guest_nice: running a niced guest
1350 The "intr" line gives counts of interrupts serviced since boot time, for each
1351 of the possible system interrupts. The first column is the total of all
1352 interrupts serviced including unnumbered architecture specific interrupts;
1353 each subsequent column is the total for that particular numbered interrupt.
1354 Unnumbered interrupts are not shown, only summed into the total.
1356 The "ctxt" line gives the total number of context switches across all CPUs.
1358 The "btime" line gives the time at which the system booted, in seconds since
1361 The "processes" line gives the number of processes and threads created, which
1362 includes (but is not limited to) those created by calls to the fork() and
1363 clone() system calls.
1365 The "procs_running" line gives the total number of threads that are
1366 running or ready to run (i.e., the total number of runnable threads).
1368 The "procs_blocked" line gives the number of processes currently blocked,
1369 waiting for I/O to complete.
1371 The "softirq" line gives counts of softirqs serviced since boot time, for each
1372 of the possible system softirqs. The first column is the total of all
1373 softirqs serviced; each subsequent column is the total for that particular
1377 1.9 Ext4 file system parameters
1378 -------------------------------
1380 Information about mounted ext4 file systems can be found in
1381 /proc/fs/ext4. Each mounted filesystem will have a directory in
1382 /proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or
1383 /proc/fs/ext4/dm-0). The files in each per-device directory are shown
1384 in Table 1-12, below.
1386 Table 1-12: Files in /proc/fs/ext4/<devname>
1387 ..............................................................................
1389 mb_groups details of multiblock allocator buddy cache of free blocks
1390 ..............................................................................
1394 Shows registered system console lines.
1396 To see which character device lines are currently used for the system console
1397 /dev/console, you may simply look into the file /proc/consoles:
1399 > cat /proc/consoles
1405 device name of the device
1406 operations R = can do read operations
1407 W = can do write operations
1409 flags E = it is enabled
1410 C = it is preferred console
1411 B = it is primary boot console
1412 p = it is used for printk buffer
1413 b = it is not a TTY but a Braille device
1414 a = it is safe to use when cpu is offline
1415 major:minor major and minor number of the device separated by a colon
1417 ------------------------------------------------------------------------------
1419 ------------------------------------------------------------------------------
1420 The /proc file system serves information about the running system. It not only
1421 allows access to process data but also allows you to request the kernel status
1422 by reading files in the hierarchy.
1424 The directory structure of /proc reflects the types of information and makes
1425 it easy, if not obvious, where to look for specific data.
1426 ------------------------------------------------------------------------------
1428 ------------------------------------------------------------------------------
1429 CHAPTER 2: MODIFYING SYSTEM PARAMETERS
1430 ------------------------------------------------------------------------------
1432 ------------------------------------------------------------------------------
1434 ------------------------------------------------------------------------------
1435 * Modifying kernel parameters by writing into files found in /proc/sys
1436 * Exploring the files which modify certain parameters
1437 * Review of the /proc/sys file tree
1438 ------------------------------------------------------------------------------
1441 A very interesting part of /proc is the directory /proc/sys. This is not only
1442 a source of information, it also allows you to change parameters within the
1443 kernel. Be very careful when attempting this. You can optimize your system,
1444 but you can also cause it to crash. Never alter kernel parameters on a
1445 production system. Set up a development machine and test to make sure that
1446 everything works the way you want it to. You may have no alternative but to
1447 reboot the machine once an error has been made.
1449 To change a value, simply echo the new value into the file. An example is
1450 given below in the section on the file system data. You need to be root to do
1451 this. You can create your own boot script to perform this every time your
1454 The files in /proc/sys can be used to fine tune and monitor miscellaneous and
1455 general things in the operation of the Linux kernel. Since some of the files
1456 can inadvertently disrupt your system, it is advisable to read both
1457 documentation and source before actually making adjustments. In any case, be
1458 very careful when writing to any of these files. The entries in /proc may
1459 change slightly between the 2.1.* and the 2.2 kernel, so if there is any doubt
1460 review the kernel documentation in the directory /usr/src/linux/Documentation.
1461 This chapter is heavily based on the documentation included in the pre 2.2
1462 kernels, and became part of it in version 2.2.1 of the Linux kernel.
1464 Please see: Documentation/sysctl/ directory for descriptions of these
1467 ------------------------------------------------------------------------------
1469 ------------------------------------------------------------------------------
1470 Certain aspects of kernel behavior can be modified at runtime, without the
1471 need to recompile the kernel, or even to reboot the system. The files in the
1472 /proc/sys tree can not only be read, but also modified. You can use the echo
1473 command to write value into these files, thereby changing the default settings
1475 ------------------------------------------------------------------------------
1477 ------------------------------------------------------------------------------
1478 CHAPTER 3: PER-PROCESS PARAMETERS
1479 ------------------------------------------------------------------------------
1481 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
1482 --------------------------------------------------------------------------------
1484 These file can be used to adjust the badness heuristic used to select which
1485 process gets killed in out of memory conditions.
1487 The badness heuristic assigns a value to each candidate task ranging from 0
1488 (never kill) to 1000 (always kill) to determine which process is targeted. The
1489 units are roughly a proportion along that range of allowed memory the process
1490 may allocate from based on an estimation of its current memory and swap use.
1491 For example, if a task is using all allowed memory, its badness score will be
1492 1000. If it is using half of its allowed memory, its score will be 500.
1494 There is an additional factor included in the badness score: the current memory
1495 and swap usage is discounted by 3% for root processes.
1497 The amount of "allowed" memory depends on the context in which the oom killer
1498 was called. If it is due to the memory assigned to the allocating task's cpuset
1499 being exhausted, the allowed memory represents the set of mems assigned to that
1500 cpuset. If it is due to a mempolicy's node(s) being exhausted, the allowed
1501 memory represents the set of mempolicy nodes. If it is due to a memory
1502 limit (or swap limit) being reached, the allowed memory is that configured
1503 limit. Finally, if it is due to the entire system being out of memory, the
1504 allowed memory represents all allocatable resources.
1506 The value of /proc/<pid>/oom_score_adj is added to the badness score before it
1507 is used to determine which task to kill. Acceptable values range from -1000
1508 (OOM_SCORE_ADJ_MIN) to +1000 (OOM_SCORE_ADJ_MAX). This allows userspace to
1509 polarize the preference for oom killing either by always preferring a certain
1510 task or completely disabling it. The lowest possible value, -1000, is
1511 equivalent to disabling oom killing entirely for that task since it will always
1512 report a badness score of 0.
1514 Consequently, it is very simple for userspace to define the amount of memory to
1515 consider for each task. Setting a /proc/<pid>/oom_score_adj value of +500, for
1516 example, is roughly equivalent to allowing the remainder of tasks sharing the
1517 same system, cpuset, mempolicy, or memory controller resources to use at least
1518 50% more memory. A value of -500, on the other hand, would be roughly
1519 equivalent to discounting 50% of the task's allowed memory from being considered
1520 as scoring against the task.
1522 For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
1523 be used to tune the badness score. Its acceptable values range from -16
1524 (OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
1525 (OOM_DISABLE) to disable oom killing entirely for that task. Its value is
1526 scaled linearly with /proc/<pid>/oom_score_adj.
1528 The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
1529 value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
1530 requires CAP_SYS_RESOURCE.
1532 Caveat: when a parent task is selected, the oom killer will sacrifice any first
1533 generation children with separate address spaces instead, if possible. This
1534 avoids servers and important system daemons from being killed and loses the
1535 minimal amount of work.
1538 3.2 /proc/<pid>/oom_score - Display current oom-killer score
1539 -------------------------------------------------------------
1541 This file can be used to check the current score used by the oom-killer is for
1542 any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
1543 process should be killed in an out-of-memory situation.
1546 3.3 /proc/<pid>/io - Display the IO accounting fields
1547 -------------------------------------------------------
1549 This file contains IO statistics for each running process
1554 test:/tmp # dd if=/dev/zero of=/tmp/test.dat &
1557 test:/tmp # cat /proc/3828/io
1563 write_bytes: 323932160
1564 cancelled_write_bytes: 0
1573 I/O counter: chars read
1574 The number of bytes which this task has caused to be read from storage. This
1575 is simply the sum of bytes which this process passed to read() and pread().
1576 It includes things like tty IO and it is unaffected by whether or not actual
1577 physical disk IO was required (the read might have been satisfied from
1584 I/O counter: chars written
1585 The number of bytes which this task has caused, or shall cause to be written
1586 to disk. Similar caveats apply here as with rchar.
1592 I/O counter: read syscalls
1593 Attempt to count the number of read I/O operations, i.e. syscalls like read()
1600 I/O counter: write syscalls
1601 Attempt to count the number of write I/O operations, i.e. syscalls like
1602 write() and pwrite().
1608 I/O counter: bytes read
1609 Attempt to count the number of bytes which this process really did cause to
1610 be fetched from the storage layer. Done at the submit_bio() level, so it is
1611 accurate for block-backed filesystems. <please add status regarding NFS and
1612 CIFS at a later time>
1618 I/O counter: bytes written
1619 Attempt to count the number of bytes which this process caused to be sent to
1620 the storage layer. This is done at page-dirtying time.
1623 cancelled_write_bytes
1624 ---------------------
1626 The big inaccuracy here is truncate. If a process writes 1MB to a file and
1627 then deletes the file, it will in fact perform no writeout. But it will have
1628 been accounted as having caused 1MB of write.
1629 In other words: The number of bytes which this process caused to not happen,
1630 by truncating pagecache. A task can cause "negative" IO too. If this task
1631 truncates some dirty pagecache, some IO which another task has been accounted
1632 for (in its write_bytes) will not be happening. We _could_ just subtract that
1633 from the truncating task's write_bytes, but there is information loss in doing
1640 At its current implementation state, this is a bit racy on 32-bit machines: if
1641 process A reads process B's /proc/pid/io while process B is updating one of
1642 those 64-bit counters, process A could see an intermediate result.
1645 More information about this can be found within the taskstats documentation in
1646 Documentation/accounting.
1648 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
1649 ---------------------------------------------------------------
1650 When a process is dumped, all anonymous memory is written to a core file as
1651 long as the size of the core file isn't limited. But sometimes we don't want
1652 to dump some memory segments, for example, huge shared memory or DAX.
1653 Conversely, sometimes we want to save file-backed memory segments into a core
1654 file, not only the individual files.
1656 /proc/<pid>/coredump_filter allows you to customize which memory segments
1657 will be dumped when the <pid> process is dumped. coredump_filter is a bitmask
1658 of memory types. If a bit of the bitmask is set, memory segments of the
1659 corresponding memory type are dumped, otherwise they are not dumped.
1661 The following 9 memory types are supported:
1662 - (bit 0) anonymous private memory
1663 - (bit 1) anonymous shared memory
1664 - (bit 2) file-backed private memory
1665 - (bit 3) file-backed shared memory
1666 - (bit 4) ELF header pages in file-backed private memory areas (it is
1667 effective only if the bit 2 is cleared)
1668 - (bit 5) hugetlb private memory
1669 - (bit 6) hugetlb shared memory
1670 - (bit 7) DAX private memory
1671 - (bit 8) DAX shared memory
1673 Note that MMIO pages such as frame buffer are never dumped and vDSO pages
1674 are always dumped regardless of the bitmask status.
1676 Note that bits 0-4 don't affect hugetlb or DAX memory. hugetlb memory is
1677 only affected by bit 5-6, and DAX is only affected by bits 7-8.
1679 The default value of coredump_filter is 0x33; this means all anonymous memory
1680 segments, ELF header pages and hugetlb private memory are dumped.
1682 If you don't want to dump all shared memory segments attached to pid 1234,
1683 write 0x31 to the process's proc file.
1685 $ echo 0x31 > /proc/1234/coredump_filter
1687 When a new process is created, the process inherits the bitmask status from its
1688 parent. It is useful to set up coredump_filter before the program runs.
1691 $ echo 0x7 > /proc/self/coredump_filter
1694 3.5 /proc/<pid>/mountinfo - Information about mounts
1695 --------------------------------------------------------
1697 This file contains lines of the form:
1699 36 35 98:0 /mnt1 /mnt2 rw,noatime master:1 - ext3 /dev/root rw,errors=continue
1700 (1)(2)(3) (4) (5) (6) (7) (8) (9) (10) (11)
1702 (1) mount ID: unique identifier of the mount (may be reused after umount)
1703 (2) parent ID: ID of parent (or of self for the top of the mount tree)
1704 (3) major:minor: value of st_dev for files on filesystem
1705 (4) root: root of the mount within the filesystem
1706 (5) mount point: mount point relative to the process's root
1707 (6) mount options: per mount options
1708 (7) optional fields: zero or more fields of the form "tag[:value]"
1709 (8) separator: marks the end of the optional fields
1710 (9) filesystem type: name of filesystem of the form "type[.subtype]"
1711 (10) mount source: filesystem specific information or "none"
1712 (11) super options: per super block options
1714 Parsers should ignore all unrecognised optional fields. Currently the
1715 possible optional fields are:
1717 shared:X mount is shared in peer group X
1718 master:X mount is slave to peer group X
1719 propagate_from:X mount is slave and receives propagation from peer group X (*)
1720 unbindable mount is unbindable
1722 (*) X is the closest dominant peer group under the process's root. If
1723 X is the immediate master of the mount, or if there's no dominant peer
1724 group under the same root, then only the "master:X" field is present
1725 and not the "propagate_from:X" field.
1727 For more information on mount propagation see:
1729 Documentation/filesystems/sharedsubtree.txt
1732 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
1733 --------------------------------------------------------
1734 These files provide a method to access a tasks comm value. It also allows for
1735 a task to set its own or one of its thread siblings comm value. The comm value
1736 is limited in size compared to the cmdline value, so writing anything longer
1737 then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated
1741 3.7 /proc/<pid>/task/<tid>/children - Information about task children
1742 -------------------------------------------------------------------------
1743 This file provides a fast way to retrieve first level children pids
1744 of a task pointed by <pid>/<tid> pair. The format is a space separated
1747 Note the "first level" here -- if a child has own children they will
1748 not be listed here, one needs to read /proc/<children-pid>/task/<tid>/children
1749 to obtain the descendants.
1751 Since this interface is intended to be fast and cheap it doesn't
1752 guarantee to provide precise results and some children might be
1753 skipped, especially if they've exited right after we printed their
1754 pids, so one need to either stop or freeze processes being inspected
1755 if precise results are needed.
1758 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
1759 ---------------------------------------------------------------
1760 This file provides information associated with an opened file. The regular
1761 files have at least three fields -- 'pos', 'flags' and mnt_id. The 'pos'
1762 represents the current offset of the opened file in decimal form [see lseek(2)
1763 for details], 'flags' denotes the octal O_xxx mask the file has been
1764 created with [see open(2) for details] and 'mnt_id' represents mount ID of
1765 the file system containing the opened file [see 3.5 /proc/<pid>/mountinfo
1774 All locks associated with a file descriptor are shown in its fdinfo too.
1776 lock: 1: FLOCK ADVISORY WRITE 359 00:13:11691 0 EOF
1778 The files such as eventfd, fsnotify, signalfd, epoll among the regular pos/flags
1779 pair provide additional information particular to the objects they represent.
1788 where 'eventfd-count' is hex value of a counter.
1795 sigmask: 0000000000000200
1797 where 'sigmask' is hex value of the signal mask associated
1805 tfd: 5 events: 1d data: ffffffffffffffff pos:0 ino:61af sdev:7
1807 where 'tfd' is a target file descriptor number in decimal form,
1808 'events' is events mask being watched and the 'data' is data
1809 associated with a target [see epoll(7) for more details].
1811 The 'pos' is current offset of the target file in decimal form
1812 [see lseek(2)], 'ino' and 'sdev' are inode and device numbers
1813 where target file resides, all in hex format.
1817 For inotify files the format is the following
1821 inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
1823 where 'wd' is a watch descriptor in decimal form, ie a target file
1824 descriptor number, 'ino' and 'sdev' are inode and device where the
1825 target file resides and the 'mask' is the mask of events, all in hex
1826 form [see inotify(7) for more details].
1828 If the kernel was built with exportfs support, the path to the target
1829 file is encoded as a file handle. The file handle is provided by three
1830 fields 'fhandle-bytes', 'fhandle-type' and 'f_handle', all in hex
1833 If the kernel is built without exportfs support the file handle won't be
1836 If there is no inotify mark attached yet the 'inotify' line will be omitted.
1838 For fanotify files the format is
1843 fanotify flags:10 event-flags:0
1844 fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
1845 fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
1847 where fanotify 'flags' and 'event-flags' are values used in fanotify_init
1848 call, 'mnt_id' is the mount point identifier, 'mflags' is the value of
1849 flags associated with mark which are tracked separately from events
1850 mask. 'ino', 'sdev' are target inode and device, 'mask' is the events
1851 mask and 'ignored_mask' is the mask of events which are to be ignored.
1852 All in hex format. Incorporation of 'mflags', 'mask' and 'ignored_mask'
1853 does provide information about flags and mask used in fanotify_mark
1854 call [see fsnotify manpage for details].
1856 While the first three lines are mandatory and always printed, the rest is
1857 optional and may be omitted if no marks created yet.
1868 it_value: (0, 49406829)
1871 where 'clockid' is the clock type and 'ticks' is the number of the timer expirations
1872 that have occurred [see timerfd_create(2) for details]. 'settime flags' are
1873 flags in octal form been used to setup the timer [see timerfd_settime(2) for
1874 details]. 'it_value' is remaining time until the timer exiration.
1875 'it_interval' is the interval for the timer. Note the timer might be set up
1876 with TIMER_ABSTIME option which will be shown in 'settime flags', but 'it_value'
1877 still exhibits timer's remaining time.
1879 3.9 /proc/<pid>/map_files - Information about memory mapped files
1880 ---------------------------------------------------------------------
1881 This directory contains symbolic links which represent memory mapped files
1882 the process is maintaining. Example output:
1884 | lr-------- 1 root root 64 Jan 27 11:24 333c600000-333c620000 -> /usr/lib64/ld-2.18.so
1885 | lr-------- 1 root root 64 Jan 27 11:24 333c81f000-333c820000 -> /usr/lib64/ld-2.18.so
1886 | lr-------- 1 root root 64 Jan 27 11:24 333c820000-333c821000 -> /usr/lib64/ld-2.18.so
1888 | lr-------- 1 root root 64 Jan 27 11:24 35d0421000-35d0422000 -> /usr/lib64/libselinux.so.1
1889 | lr-------- 1 root root 64 Jan 27 11:24 400000-41a000 -> /usr/bin/ls
1891 The name of a link represents the virtual memory bounds of a mapping, i.e.
1892 vm_area_struct::vm_start-vm_area_struct::vm_end.
1894 The main purpose of the map_files is to retrieve a set of memory mapped
1895 files in a fast way instead of parsing /proc/<pid>/maps or
1896 /proc/<pid>/smaps, both of which contain many more records. At the same
1897 time one can open(2) mappings from the listings of two processes and
1898 comparing their inode numbers to figure out which anonymous memory areas
1899 are actually shared.
1901 3.10 /proc/<pid>/timerslack_ns - Task timerslack value
1902 ---------------------------------------------------------
1903 This file provides the value of the task's timerslack value in nanoseconds.
1904 This value specifies a amount of time that normal timers may be deferred
1905 in order to coalesce timers and avoid unnecessary wakeups.
1907 This allows a task's interactivity vs power consumption trade off to be
1910 Writing 0 to the file will set the tasks timerslack to the default value.
1912 Valid values are from 0 - ULLONG_MAX
1914 An application setting the value must have PTRACE_MODE_ATTACH_FSCREDS level
1915 permissions on the task specified to change its timerslack_ns value.
1917 3.11 /proc/<pid>/patch_state - Livepatch patch operation state
1918 -----------------------------------------------------------------
1919 When CONFIG_LIVEPATCH is enabled, this file displays the value of the
1920 patch state for the task.
1922 A value of '-1' indicates that no patch is in transition.
1924 A value of '0' indicates that a patch is in transition and the task is
1925 unpatched. If the patch is being enabled, then the task hasn't been
1926 patched yet. If the patch is being disabled, then the task has already
1929 A value of '1' indicates that a patch is in transition and the task is
1930 patched. If the patch is being enabled, then the task has already been
1931 patched. If the patch is being disabled, then the task hasn't been
1935 ------------------------------------------------------------------------------
1937 ------------------------------------------------------------------------------
1940 ---------------------
1942 The following mount options are supported:
1944 hidepid= Set /proc/<pid>/ access mode.
1945 gid= Set the group authorized to learn processes information.
1947 hidepid=0 means classic mode - everybody may access all /proc/<pid>/ directories
1950 hidepid=1 means users may not access any /proc/<pid>/ directories but their
1951 own. Sensitive files like cmdline, sched*, status are now protected against
1952 other users. This makes it impossible to learn whether any user runs
1953 specific program (given the program doesn't reveal itself by its behaviour).
1954 As an additional bonus, as /proc/<pid>/cmdline is unaccessible for other users,
1955 poorly written programs passing sensitive information via program arguments are
1956 now protected against local eavesdroppers.
1958 hidepid=2 means hidepid=1 plus all /proc/<pid>/ will be fully invisible to other
1959 users. It doesn't mean that it hides a fact whether a process with a specific
1960 pid value exists (it can be learned by other means, e.g. by "kill -0 $PID"),
1961 but it hides process' uid and gid, which may be learned by stat()'ing
1962 /proc/<pid>/ otherwise. It greatly complicates an intruder's task of gathering
1963 information about running processes, whether some daemon runs with elevated
1964 privileges, whether other user runs some sensitive program, whether other users
1965 run any program at all, etc.
1967 gid= defines a group authorized to learn processes information otherwise
1968 prohibited by hidepid=. If you use some daemon like identd which needs to learn
1969 information about processes information, just add identd to this group.
projects / mirror_ubuntu-eoan-kernel.git / blob