1 ------------------------------------------------------------------------------
2 T H E /proc F I L E S Y S T E M
3 ------------------------------------------------------------------------------
4 /proc/sys Terrehon Bowden <terrehon@pacbell.net> October 7 1999
5 Bodo Bauer <bb@ricochet.net>
7 2.4.x update Jorge Nerin <comandante@zaralinux.com> November 14 2000
8 move /proc/sys Shen Feng <shen@cn.fujitsu.com> April 1 2009
9 ------------------------------------------------------------------------------
10 Version 1.3 Kernel version 2.2.12
11 Kernel version 2.4.0-test11-pre4
12 ------------------------------------------------------------------------------
13 fixes/update part 1.1 Stefani Seibold <stefani@seibold.net> June 9 2009
19 0.1 Introduction/Credits
22 1 Collecting System Information
23 1.1 Process-Specific Subdirectories
25 1.3 IDE devices in /proc/ide
26 1.4 Networking info in /proc/net
28 1.6 Parallel port info in /proc/parport
29 1.7 TTY info in /proc/tty
30 1.8 Miscellaneous kernel statistics in /proc/stat
31 1.9 Ext4 file system parameters
33 2 Modifying System Parameters
35 3 Per-Process Parameters
36 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
38 3.2 /proc/<pid>/oom_score - Display current oom-killer score
39 3.3 /proc/<pid>/io - Display the IO accounting fields
40 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
41 3.5 /proc/<pid>/mountinfo - Information about mounts
42 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
43 3.7 /proc/<pid>/task/<tid>/children - Information about task children
44 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
45 3.9 /proc/<pid>/map_files - Information about memory mapped files
46 3.10 /proc/<pid>/timerslack_ns - Task timerslack value
51 ------------------------------------------------------------------------------
53 ------------------------------------------------------------------------------
55 0.1 Introduction/Credits
56 ------------------------
58 This documentation is part of a soon (or so we hope) to be released book on
59 the SuSE Linux distribution. As there is no complete documentation for the
60 /proc file system and we've used many freely available sources to write these
61 chapters, it seems only fair to give the work back to the Linux community.
62 This work is based on the 2.2.* kernel version and the upcoming 2.4.*. I'm
63 afraid it's still far from complete, but we hope it will be useful. As far as
64 we know, it is the first 'all-in-one' document about the /proc file system. It
65 is focused on the Intel x86 hardware, so if you are looking for PPC, ARM,
66 SPARC, AXP, etc., features, you probably won't find what you are looking for.
67 It also only covers IPv4 networking, not IPv6 nor other protocols - sorry. But
68 additions and patches are welcome and will be added to this document if you
71 We'd like to thank Alan Cox, Rik van Riel, and Alexey Kuznetsov and a lot of
72 other people for help compiling this documentation. We'd also like to extend a
73 special thank you to Andi Kleen for documentation, which we relied on heavily
74 to create this document, as well as the additional information he provided.
75 Thanks to everybody else who contributed source or docs to the Linux kernel
76 and helped create a great piece of software... :)
78 If you have any comments, corrections or additions, please don't hesitate to
79 contact Bodo Bauer at bb@ricochet.net. We'll be happy to add them to this
82 The latest version of this document is available online at
83 http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/proc.html
85 If the above direction does not works for you, you could try the kernel
86 mailing list at linux-kernel@vger.kernel.org and/or try to reach me at
87 comandante@zaralinux.com.
92 We don't guarantee the correctness of this document, and if you come to us
93 complaining about how you screwed up your system because of incorrect
94 documentation, we won't feel responsible...
96 ------------------------------------------------------------------------------
97 CHAPTER 1: COLLECTING SYSTEM INFORMATION
98 ------------------------------------------------------------------------------
100 ------------------------------------------------------------------------------
102 ------------------------------------------------------------------------------
103 * Investigating the properties of the pseudo file system /proc and its
104 ability to provide information on the running Linux system
105 * Examining /proc's structure
106 * Uncovering various information about the kernel and the processes running
108 ------------------------------------------------------------------------------
111 The proc file system acts as an interface to internal data structures in the
112 kernel. It can be used to obtain information about the system and to change
113 certain kernel parameters at runtime (sysctl).
115 First, we'll take a look at the read-only parts of /proc. In Chapter 2, we
116 show you how you can use /proc/sys to change settings.
118 1.1 Process-Specific Subdirectories
119 -----------------------------------
121 The directory /proc contains (among other things) one subdirectory for each
122 process running on the system, which is named after the process ID (PID).
124 The link self points to the process reading the file system. Each process
125 subdirectory has the entries listed in Table 1-1.
128 Table 1-1: Process specific entries in /proc
129 ..............................................................................
131 clear_refs Clears page referenced bits shown in smaps output
132 cmdline Command line arguments
133 cpu Current and last cpu in which it was executed (2.4)(smp)
134 cwd Link to the current working directory
135 environ Values of environment variables
136 exe Link to the executable of this process
137 fd Directory, which contains all file descriptors
138 maps Memory maps to executables and library files (2.4)
139 mem Memory held by this process
140 root Link to the root directory of this process
142 statm Process memory status information
143 status Process status in human readable form
144 wchan Present with CONFIG_KALLSYMS=y: it shows the kernel function
145 symbol the task is blocked in - or "0" if not blocked.
147 stack Report full stack trace, enable via CONFIG_STACKTRACE
148 smaps an extension based on maps, showing the memory consumption of
149 each mapping and flags associated with it
150 numa_maps an extension based on maps, showing the memory locality and
151 binding policy as well as mem usage (in pages) of each mapping.
152 ..............................................................................
154 For example, to get the status information of a process, all you have to do is
155 read the file /proc/PID/status:
157 >cat /proc/self/status
185 SigPnd: 0000000000000000
186 ShdPnd: 0000000000000000
187 SigBlk: 0000000000000000
188 SigIgn: 0000000000000000
189 SigCgt: 0000000000000000
190 CapInh: 00000000fffffeff
191 CapPrm: 0000000000000000
192 CapEff: 0000000000000000
193 CapBnd: ffffffffffffffff
195 voluntary_ctxt_switches: 0
196 nonvoluntary_ctxt_switches: 1
198 This shows you nearly the same information you would get if you viewed it with
199 the ps command. In fact, ps uses the proc file system to obtain its
200 information. But you get a more detailed view of the process by reading the
201 file /proc/PID/status. It fields are described in table 1-2.
203 The statm file contains more detailed information about the process
204 memory usage. Its seven fields are explained in Table 1-3. The stat file
205 contains details information about the process itself. Its fields are
206 explained in Table 1-4.
208 (for SMP CONFIG users)
209 For making accounting scalable, RSS related information are handled in an
210 asynchronous manner and the value may not be very precise. To see a precise
211 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
212 It's slow but very precise.
214 Table 1-2: Contents of the status files (as of 4.1)
215 ..............................................................................
217 Name filename of the executable
218 State state (R is running, S is sleeping, D is sleeping
219 in an uninterruptible wait, Z is zombie,
220 T is traced or stopped)
222 Ngid NUMA group ID (0 if none)
224 PPid process id of the parent process
225 TracerPid PID of process tracing this process (0 if not)
226 Uid Real, effective, saved set, and file system UIDs
227 Gid Real, effective, saved set, and file system GIDs
228 Umask file mode creation mask
229 FDSize number of file descriptor slots currently allocated
230 Groups supplementary group list
231 NStgid descendant namespace thread group ID hierarchy
232 NSpid descendant namespace process ID hierarchy
233 NSpgid descendant namespace process group ID hierarchy
234 NSsid descendant namespace session ID hierarchy
235 VmPeak peak virtual memory size
236 VmSize total program size
237 VmLck locked memory size
238 VmHWM peak resident set size ("high water mark")
239 VmRSS size of memory portions. It contains the three
240 following parts (VmRSS = RssAnon + RssFile + RssShmem)
241 RssAnon size of resident anonymous memory
242 RssFile size of resident file mappings
243 RssShmem size of resident shmem memory (includes SysV shm,
244 mapping of tmpfs and shared anonymous mappings)
245 VmData size of private data segments
246 VmStk size of stack segments
247 VmExe size of text segment
248 VmLib size of shared library code
249 VmPTE size of page table entries
250 VmPMD size of second level page tables
251 VmSwap amount of swap used by anonymous private data
252 (shmem swap usage is not included)
253 HugetlbPages size of hugetlb memory portions
254 Threads number of threads
255 SigQ number of signals queued/max. number for queue
256 SigPnd bitmap of pending signals for the thread
257 ShdPnd bitmap of shared pending signals for the process
258 SigBlk bitmap of blocked signals
259 SigIgn bitmap of ignored signals
260 SigCgt bitmap of caught signals
261 CapInh bitmap of inheritable capabilities
262 CapPrm bitmap of permitted capabilities
263 CapEff bitmap of effective capabilities
264 CapBnd bitmap of capabilities bounding set
265 Seccomp seccomp mode, like prctl(PR_GET_SECCOMP, ...)
266 Cpus_allowed mask of CPUs on which this process may run
267 Cpus_allowed_list Same as previous, but in "list format"
268 Mems_allowed mask of memory nodes allowed to this process
269 Mems_allowed_list Same as previous, but in "list format"
270 voluntary_ctxt_switches number of voluntary context switches
271 nonvoluntary_ctxt_switches number of non voluntary context switches
272 ..............................................................................
274 Table 1-3: Contents of the statm files (as of 2.6.8-rc3)
275 ..............................................................................
277 size total program size (pages) (same as VmSize in status)
278 resident size of memory portions (pages) (same as VmRSS in status)
279 shared number of pages that are shared (i.e. backed by a file, same
280 as RssFile+RssShmem in status)
281 trs number of pages that are 'code' (not including libs; broken,
282 includes data segment)
283 lrs number of pages of library (always 0 on 2.6)
284 drs number of pages of data/stack (including libs; broken,
285 includes library text)
286 dt number of dirty pages (always 0 on 2.6)
287 ..............................................................................
290 Table 1-4: Contents of the stat files (as of 2.6.30-rc7)
291 ..............................................................................
294 tcomm filename of the executable
295 state state (R is running, S is sleeping, D is sleeping in an
296 uninterruptible wait, Z is zombie, T is traced or stopped)
297 ppid process id of the parent process
298 pgrp pgrp of the process
300 tty_nr tty the process uses
301 tty_pgrp pgrp of the tty
303 min_flt number of minor faults
304 cmin_flt number of minor faults with child's
305 maj_flt number of major faults
306 cmaj_flt number of major faults with child's
307 utime user mode jiffies
308 stime kernel mode jiffies
309 cutime user mode jiffies with child's
310 cstime kernel mode jiffies with child's
311 priority priority level
313 num_threads number of threads
314 it_real_value (obsolete, always 0)
315 start_time time the process started after system boot
316 vsize virtual memory size
317 rss resident set memory size
318 rsslim current limit in bytes on the rss
319 start_code address above which program text can run
320 end_code address below which program text can run
321 start_stack address of the start of the main process stack
322 esp current value of ESP
323 eip current value of EIP
324 pending bitmap of pending signals
325 blocked bitmap of blocked signals
326 sigign bitmap of ignored signals
327 sigcatch bitmap of caught signals
328 0 (place holder, used to be the wchan address, use /proc/PID/wchan instead)
331 exit_signal signal to send to parent thread on exit
332 task_cpu which CPU the task is scheduled on
333 rt_priority realtime priority
334 policy scheduling policy (man sched_setscheduler)
335 blkio_ticks time spent waiting for block IO
336 gtime guest time of the task in jiffies
337 cgtime guest time of the task children in jiffies
338 start_data address above which program data+bss is placed
339 end_data address below which program data+bss is placed
340 start_brk address above which program heap can be expanded with brk()
341 arg_start address above which program command line is placed
342 arg_end address below which program command line is placed
343 env_start address above which program environment is placed
344 env_end address below which program environment is placed
345 exit_code the thread's exit_code in the form reported by the waitpid system call
346 ..............................................................................
348 The /proc/PID/maps file containing the currently mapped memory regions and
349 their access permissions.
353 address perms offset dev inode pathname
355 08048000-08049000 r-xp 00000000 03:00 8312 /opt/test
356 08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
357 0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
358 a7cb1000-a7cb2000 ---p 00000000 00:00 0
359 a7cb2000-a7eb2000 rw-p 00000000 00:00 0
360 a7eb2000-a7eb3000 ---p 00000000 00:00 0
361 a7eb3000-a7ed5000 rw-p 00000000 00:00 0
362 a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
363 a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6
364 a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6
365 a800b000-a800e000 rw-p 00000000 00:00 0
366 a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0
367 a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0
368 a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0
369 a8024000-a8027000 rw-p 00000000 00:00 0
370 a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2
371 a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2
372 a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2
373 aff35000-aff4a000 rw-p 00000000 00:00 0 [stack]
374 ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso]
376 where "address" is the address space in the process that it occupies, "perms"
377 is a set of permissions:
383 p = private (copy on write)
385 "offset" is the offset into the mapping, "dev" is the device (major:minor), and
386 "inode" is the inode on that device. 0 indicates that no inode is associated
387 with the memory region, as the case would be with BSS (uninitialized data).
388 The "pathname" shows the name associated file for this mapping. If the mapping
389 is not associated with a file:
391 [heap] = the heap of the program
392 [stack] = the stack of the main process
393 [vdso] = the "virtual dynamic shared object",
394 the kernel system call handler
396 or if empty, the mapping is anonymous.
398 The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
399 of the individual tasks of a process. In this file you will see a mapping marked
400 as [stack] if that task sees it as a stack. Hence, for the example above, the
401 task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
403 08048000-08049000 r-xp 00000000 03:00 8312 /opt/test
404 08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
405 0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
406 a7cb1000-a7cb2000 ---p 00000000 00:00 0
407 a7cb2000-a7eb2000 rw-p 00000000 00:00 0
408 a7eb2000-a7eb3000 ---p 00000000 00:00 0
409 a7eb3000-a7ed5000 rw-p 00000000 00:00 0 [stack]
410 a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
411 a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6
412 a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6
413 a800b000-a800e000 rw-p 00000000 00:00 0
414 a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0
415 a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0
416 a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0
417 a8024000-a8027000 rw-p 00000000 00:00 0
418 a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2
419 a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2
420 a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2
421 aff35000-aff4a000 rw-p 00000000 00:00 0
422 ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso]
424 The /proc/PID/smaps is an extension based on maps, showing the memory
425 consumption for each of the process's mappings. For each of mappings there
426 is a series of lines such as the following:
428 08048000-080bc000 r-xp 00000000 03:02 13130 /bin/bash
441 Private_Hugetlb: 0 kB
447 VmFlags: rd ex mr mw me dw
449 the first of these lines shows the same information as is displayed for the
450 mapping in /proc/PID/maps. The remaining lines show the size of the mapping
451 (size), the amount of the mapping that is currently resident in RAM (RSS), the
452 process' proportional share of this mapping (PSS), the number of clean and
453 dirty private pages in the mapping.
455 The "proportional set size" (PSS) of a process is the count of pages it has
456 in memory, where each page is divided by the number of processes sharing it.
457 So if a process has 1000 pages all to itself, and 1000 shared with one other
458 process, its PSS will be 1500.
459 Note that even a page which is part of a MAP_SHARED mapping, but has only
460 a single pte mapped, i.e. is currently used by only one process, is accounted
461 as private and not as shared.
462 "Referenced" indicates the amount of memory currently marked as referenced or
464 "Anonymous" shows the amount of memory that does not belong to any file. Even
465 a mapping associated with a file may contain anonymous pages: when MAP_PRIVATE
466 and a page is modified, the file page is replaced by a private anonymous copy.
467 "AnonHugePages" shows the ammount of memory backed by transparent hugepage.
468 "ShmemPmdMapped" shows the ammount of shared (shmem/tmpfs) memory backed by
470 "Shared_Hugetlb" and "Private_Hugetlb" show the ammounts of memory backed by
471 hugetlbfs page which is *not* counted in "RSS" or "PSS" field for historical
472 reasons. And these are not included in {Shared,Private}_{Clean,Dirty} field.
473 "Swap" shows how much would-be-anonymous memory is also used, but out on swap.
474 For shmem mappings, "Swap" includes also the size of the mapped (and not
475 replaced by copy-on-write) part of the underlying shmem object out on swap.
476 "SwapPss" shows proportional swap share of this mapping. Unlike "Swap", this
477 does not take into account swapped out page of underlying shmem objects.
478 "Locked" indicates whether the mapping is locked in memory or not.
480 "VmFlags" field deserves a separate description. This member represents the kernel
481 flags associated with the particular virtual memory area in two letter encoded
482 manner. The codes are the following:
491 gd - stack segment growns down
493 dw - disabled write to the mapped file
494 lo - pages are locked in memory
495 io - memory mapped I/O area
496 sr - sequential read advise provided
497 rr - random read advise provided
498 dc - do not copy area on fork
499 de - do not expand area on remapping
500 ac - area is accountable
501 nr - swap space is not reserved for the area
502 ht - area uses huge tlb pages
503 ar - architecture specific flag
504 dd - do not include area into core dump
507 hg - huge page advise flag
508 nh - no-huge page advise flag
509 mg - mergable advise flag
511 Note that there is no guarantee that every flag and associated mnemonic will
512 be present in all further kernel releases. Things get changed, the flags may
513 be vanished or the reverse -- new added.
515 This file is only present if the CONFIG_MMU kernel configuration option is
518 Note: reading /proc/PID/maps or /proc/PID/smaps is inherently racy (consistent
519 output can be achieved only in the single read call).
520 This typically manifests when doing partial reads of these files while the
521 memory map is being modified. Despite the races, we do provide the following
524 1) The mapped addresses never go backwards, which implies no two
525 regions will ever overlap.
526 2) If there is something at a given vaddr during the entirety of the
527 life of the smaps/maps walk, there will be some output for it.
530 The /proc/PID/clear_refs is used to reset the PG_Referenced and ACCESSED/YOUNG
531 bits on both physical and virtual pages associated with a process, and the
532 soft-dirty bit on pte (see Documentation/vm/soft-dirty.txt for details).
533 To clear the bits for all the pages associated with the process
534 > echo 1 > /proc/PID/clear_refs
536 To clear the bits for the anonymous pages associated with the process
537 > echo 2 > /proc/PID/clear_refs
539 To clear the bits for the file mapped pages associated with the process
540 > echo 3 > /proc/PID/clear_refs
542 To clear the soft-dirty bit
543 > echo 4 > /proc/PID/clear_refs
545 To reset the peak resident set size ("high water mark") to the process's
547 > echo 5 > /proc/PID/clear_refs
549 Any other value written to /proc/PID/clear_refs will have no effect.
551 The /proc/pid/pagemap gives the PFN, which can be used to find the pageflags
552 using /proc/kpageflags and number of times a page is mapped using
553 /proc/kpagecount. For detailed explanation, see Documentation/vm/pagemap.txt.
555 The /proc/pid/numa_maps is an extension based on maps, showing the memory
556 locality and binding policy, as well as the memory usage (in pages) of
557 each mapping. The output follows a general format where mapping details get
558 summarized separated by blank spaces, one mapping per each file line:
560 address policy mapping details
562 00400000 default file=/usr/local/bin/app mapped=1 active=0 N3=1 kernelpagesize_kB=4
563 00600000 default file=/usr/local/bin/app anon=1 dirty=1 N3=1 kernelpagesize_kB=4
564 3206000000 default file=/lib64/ld-2.12.so mapped=26 mapmax=6 N0=24 N3=2 kernelpagesize_kB=4
565 320621f000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
566 3206220000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
567 3206221000 default anon=1 dirty=1 N3=1 kernelpagesize_kB=4
568 3206800000 default file=/lib64/libc-2.12.so mapped=59 mapmax=21 active=55 N0=41 N3=18 kernelpagesize_kB=4
569 320698b000 default file=/lib64/libc-2.12.so
570 3206b8a000 default file=/lib64/libc-2.12.so anon=2 dirty=2 N3=2 kernelpagesize_kB=4
571 3206b8e000 default file=/lib64/libc-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
572 3206b8f000 default anon=3 dirty=3 active=1 N3=3 kernelpagesize_kB=4
573 7f4dc10a2000 default anon=3 dirty=3 N3=3 kernelpagesize_kB=4
574 7f4dc10b4000 default anon=2 dirty=2 active=1 N3=2 kernelpagesize_kB=4
575 7f4dc1200000 default file=/anon_hugepage\040(deleted) huge anon=1 dirty=1 N3=1 kernelpagesize_kB=2048
576 7fff335f0000 default stack anon=3 dirty=3 N3=3 kernelpagesize_kB=4
577 7fff3369d000 default mapped=1 mapmax=35 active=0 N3=1 kernelpagesize_kB=4
580 "address" is the starting address for the mapping;
581 "policy" reports the NUMA memory policy set for the mapping (see vm/numa_memory_policy.txt);
582 "mapping details" summarizes mapping data such as mapping type, page usage counters,
583 node locality page counters (N0 == node0, N1 == node1, ...) and the kernel page
584 size, in KB, that is backing the mapping up.
589 Similar to the process entries, the kernel data files give information about
590 the running kernel. The files used to obtain this information are contained in
591 /proc and are listed in Table 1-5. Not all of these will be present in your
592 system. It depends on the kernel configuration and the loaded modules, which
593 files are there, and which are missing.
595 Table 1-5: Kernel info in /proc
596 ..............................................................................
598 apm Advanced power management info
599 buddyinfo Kernel memory allocator information (see text) (2.5)
600 bus Directory containing bus specific information
601 cmdline Kernel command line
602 cpuinfo Info about the CPU
603 devices Available devices (block and character)
604 dma Used DMS channels
605 filesystems Supported filesystems
606 driver Various drivers grouped here, currently rtc (2.4)
607 execdomains Execdomains, related to security (2.4)
608 fb Frame Buffer devices (2.4)
609 fs File system parameters, currently nfs/exports (2.4)
610 ide Directory containing info about the IDE subsystem
611 interrupts Interrupt usage
612 iomem Memory map (2.4)
613 ioports I/O port usage
614 irq Masks for irq to cpu affinity (2.4)(smp?)
615 isapnp ISA PnP (Plug&Play) Info (2.4)
616 kcore Kernel core image (can be ELF or A.OUT(deprecated in 2.4))
618 ksyms Kernel symbol table
619 loadavg Load average of last 1, 5 & 15 minutes
623 modules List of loaded modules
624 mounts Mounted filesystems
625 net Networking info (see text)
626 pagetypeinfo Additional page allocator information (see text) (2.5)
627 partitions Table of partitions known to the system
628 pci Deprecated info of PCI bus (new way -> /proc/bus/pci/,
629 decoupled by lspci (2.4)
631 scsi SCSI info (see text)
632 slabinfo Slab pool info
633 softirqs softirq usage
634 stat Overall statistics
635 swaps Swap space utilization
637 sysvipc Info of SysVIPC Resources (msg, sem, shm) (2.4)
638 tty Info of tty drivers
639 uptime Wall clock since boot, combined idle time of all cpus
640 version Kernel version
641 video bttv info of video resources (2.4)
642 vmallocinfo Show vmalloced areas
643 ..............................................................................
645 You can, for example, check which interrupts are currently in use and what
646 they are used for by looking in the file /proc/interrupts:
648 > cat /proc/interrupts
650 0: 8728810 XT-PIC timer
651 1: 895 XT-PIC keyboard
653 3: 531695 XT-PIC aha152x
654 4: 2014133 XT-PIC serial
655 5: 44401 XT-PIC pcnet_cs
658 12: 182918 XT-PIC PS/2 Mouse
660 14: 1232265 XT-PIC ide0
664 In 2.4.* a couple of lines where added to this file LOC & ERR (this time is the
665 output of a SMP machine):
667 > cat /proc/interrupts
670 0: 1243498 1214548 IO-APIC-edge timer
671 1: 8949 8958 IO-APIC-edge keyboard
672 2: 0 0 XT-PIC cascade
673 5: 11286 10161 IO-APIC-edge soundblaster
674 8: 1 0 IO-APIC-edge rtc
675 9: 27422 27407 IO-APIC-edge 3c503
676 12: 113645 113873 IO-APIC-edge PS/2 Mouse
678 14: 22491 24012 IO-APIC-edge ide0
679 15: 2183 2415 IO-APIC-edge ide1
680 17: 30564 30414 IO-APIC-level eth0
681 18: 177 164 IO-APIC-level bttv
686 NMI is incremented in this case because every timer interrupt generates a NMI
687 (Non Maskable Interrupt) which is used by the NMI Watchdog to detect lockups.
689 LOC is the local interrupt counter of the internal APIC of every CPU.
691 ERR is incremented in the case of errors in the IO-APIC bus (the bus that
692 connects the CPUs in a SMP system. This means that an error has been detected,
693 the IO-APIC automatically retry the transmission, so it should not be a big
694 problem, but you should read the SMP-FAQ.
696 In 2.6.2* /proc/interrupts was expanded again. This time the goal was for
697 /proc/interrupts to display every IRQ vector in use by the system, not
698 just those considered 'most important'. The new vectors are:
700 THR -- interrupt raised when a machine check threshold counter
701 (typically counting ECC corrected errors of memory or cache) exceeds
702 a configurable threshold. Only available on some systems.
704 TRM -- a thermal event interrupt occurs when a temperature threshold
705 has been exceeded for the CPU. This interrupt may also be generated
706 when the temperature drops back to normal.
708 SPU -- a spurious interrupt is some interrupt that was raised then lowered
709 by some IO device before it could be fully processed by the APIC. Hence
710 the APIC sees the interrupt but does not know what device it came from.
711 For this case the APIC will generate the interrupt with a IRQ vector
712 of 0xff. This might also be generated by chipset bugs.
714 RES, CAL, TLB -- rescheduling, call and TLB flush interrupts are
715 sent from one CPU to another per the needs of the OS. Typically,
716 their statistics are used by kernel developers and interested users to
717 determine the occurrence of interrupts of the given type.
719 The above IRQ vectors are displayed only when relevant. For example,
720 the threshold vector does not exist on x86_64 platforms. Others are
721 suppressed when the system is a uniprocessor. As of this writing, only
722 i386 and x86_64 platforms support the new IRQ vector displays.
724 Of some interest is the introduction of the /proc/irq directory to 2.4.
725 It could be used to set IRQ to CPU affinity, this means that you can "hook" an
726 IRQ to only one CPU, or to exclude a CPU of handling IRQs. The contents of the
727 irq subdir is one subdir for each IRQ, and two files; default_smp_affinity and
732 0 10 12 14 16 18 2 4 6 8 prof_cpu_mask
733 1 11 13 15 17 19 3 5 7 9 default_smp_affinity
737 smp_affinity is a bitmask, in which you can specify which CPUs can handle the
738 IRQ, you can set it by doing:
740 > echo 1 > /proc/irq/10/smp_affinity
742 This means that only the first CPU will handle the IRQ, but you can also echo
743 5 which means that only the first and third CPU can handle the IRQ.
745 The contents of each smp_affinity file is the same by default:
747 > cat /proc/irq/0/smp_affinity
750 There is an alternate interface, smp_affinity_list which allows specifying
751 a cpu range instead of a bitmask:
753 > cat /proc/irq/0/smp_affinity_list
756 The default_smp_affinity mask applies to all non-active IRQs, which are the
757 IRQs which have not yet been allocated/activated, and hence which lack a
758 /proc/irq/[0-9]* directory.
760 The node file on an SMP system shows the node to which the device using the IRQ
761 reports itself as being attached. This hardware locality information does not
762 include information about any possible driver locality preference.
764 prof_cpu_mask specifies which CPUs are to be profiled by the system wide
765 profiler. Default value is ffffffff (all cpus if there are only 32 of them).
767 The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
768 between all the CPUs which are allowed to handle it. As usual the kernel has
769 more info than you and does a better job than you, so the defaults are the
770 best choice for almost everyone. [Note this applies only to those IO-APIC's
771 that support "Round Robin" interrupt distribution.]
773 There are three more important subdirectories in /proc: net, scsi, and sys.
774 The general rule is that the contents, or even the existence of these
775 directories, depend on your kernel configuration. If SCSI is not enabled, the
776 directory scsi may not exist. The same is true with the net, which is there
777 only when networking support is present in the running kernel.
779 The slabinfo file gives information about memory usage at the slab level.
780 Linux uses slab pools for memory management above page level in version 2.2.
781 Commonly used objects have their own slab pool (such as network buffers,
782 directory cache, and so on).
784 ..............................................................................
786 > cat /proc/buddyinfo
788 Node 0, zone DMA 0 4 5 4 4 3 ...
789 Node 0, zone Normal 1 0 0 1 101 8 ...
790 Node 0, zone HighMem 2 0 0 1 1 0 ...
792 External fragmentation is a problem under some workloads, and buddyinfo is a
793 useful tool for helping diagnose these problems. Buddyinfo will give you a
794 clue as to how big an area you can safely allocate, or why a previous
797 Each column represents the number of pages of a certain order which are
798 available. In this case, there are 0 chunks of 2^0*PAGE_SIZE available in
799 ZONE_DMA, 4 chunks of 2^1*PAGE_SIZE in ZONE_DMA, 101 chunks of 2^4*PAGE_SIZE
800 available in ZONE_NORMAL, etc...
802 More information relevant to external fragmentation can be found in
805 > cat /proc/pagetypeinfo
809 Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10
810 Node 0, zone DMA, type Unmovable 0 0 0 1 1 1 1 1 1 1 0
811 Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
812 Node 0, zone DMA, type Movable 1 1 2 1 2 1 1 0 1 0 2
813 Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 1 0
814 Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0
815 Node 0, zone DMA32, type Unmovable 103 54 77 1 1 1 11 8 7 1 9
816 Node 0, zone DMA32, type Reclaimable 0 0 2 1 0 0 0 0 1 0 0
817 Node 0, zone DMA32, type Movable 169 152 113 91 77 54 39 13 6 1 452
818 Node 0, zone DMA32, type Reserve 1 2 2 2 2 0 1 1 1 1 0
819 Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0
821 Number of blocks type Unmovable Reclaimable Movable Reserve Isolate
822 Node 0, zone DMA 2 0 5 1 0
823 Node 0, zone DMA32 41 6 967 2 0
825 Fragmentation avoidance in the kernel works by grouping pages of different
826 migrate types into the same contiguous regions of memory called page blocks.
827 A page block is typically the size of the default hugepage size e.g. 2MB on
828 X86-64. By keeping pages grouped based on their ability to move, the kernel
829 can reclaim pages within a page block to satisfy a high-order allocation.
831 The pagetypinfo begins with information on the size of a page block. It
832 then gives the same type of information as buddyinfo except broken down
833 by migrate-type and finishes with details on how many page blocks of each
836 If min_free_kbytes has been tuned correctly (recommendations made by hugeadm
837 from libhugetlbfs https://github.com/libhugetlbfs/libhugetlbfs/), one can
838 make an estimate of the likely number of huge pages that can be allocated
839 at a given point in time. All the "Movable" blocks should be allocatable
840 unless memory has been mlock()'d. Some of the Reclaimable blocks should
841 also be allocatable although a lot of filesystem metadata may have to be
842 reclaimed to achieve this.
844 ..............................................................................
848 Provides information about distribution and utilization of memory. This
849 varies by architecture and compile options. The following is from a
850 16GB PIII, which has highmem enabled. You may not have all of these fields.
854 MemTotal: 16344972 kB
856 MemAvailable: 14836172 kB
862 HighTotal: 15597528 kB
863 HighFree: 13629632 kB
874 SReclaimable: 159856 kB
875 SUnreclaim: 124508 kB
880 CommitLimit: 7669796 kB
881 Committed_AS: 100056 kB
882 VmallocTotal: 112216 kB
884 VmallocChunk: 111088 kB
885 AnonHugePages: 49152 kB
890 MemTotal: Total usable ram (i.e. physical ram minus a few reserved
891 bits and the kernel binary code)
892 MemFree: The sum of LowFree+HighFree
893 MemAvailable: An estimate of how much memory is available for starting new
894 applications, without swapping. Calculated from MemFree,
895 SReclaimable, the size of the file LRU lists, and the low
896 watermarks in each zone.
897 The estimate takes into account that the system needs some
898 page cache to function well, and that not all reclaimable
899 slab will be reclaimable, due to items being in use. The
900 impact of those factors will vary from system to system.
901 Buffers: Relatively temporary storage for raw disk blocks
902 shouldn't get tremendously large (20MB or so)
903 Cached: in-memory cache for files read from the disk (the
904 pagecache). Doesn't include SwapCached
905 SwapCached: Memory that once was swapped out, is swapped back in but
906 still also is in the swapfile (if memory is needed it
907 doesn't need to be swapped out AGAIN because it is already
908 in the swapfile. This saves I/O)
909 Active: Memory that has been used more recently and usually not
910 reclaimed unless absolutely necessary.
911 Inactive: Memory which has been less recently used. It is more
912 eligible to be reclaimed for other purposes
914 HighFree: Highmem is all memory above ~860MB of physical memory
915 Highmem areas are for use by userspace programs, or
916 for the pagecache. The kernel must use tricks to access
917 this memory, making it slower to access than lowmem.
919 LowFree: Lowmem is memory which can be used for everything that
920 highmem can be used for, but it is also available for the
921 kernel's use for its own data structures. Among many
922 other things, it is where everything from the Slab is
923 allocated. Bad things happen when you're out of lowmem.
924 SwapTotal: total amount of swap space available
925 SwapFree: Memory which has been evicted from RAM, and is temporarily
927 Dirty: Memory which is waiting to get written back to the disk
928 Writeback: Memory which is actively being written back to the disk
929 AnonPages: Non-file backed pages mapped into userspace page tables
930 AnonHugePages: Non-file backed huge pages mapped into userspace page tables
931 Mapped: files which have been mmaped, such as libraries
932 Shmem: Total memory used by shared memory (shmem) and tmpfs
933 ShmemHugePages: Memory used by shared memory (shmem) and tmpfs allocated
935 ShmemPmdMapped: Shared memory mapped into userspace with huge pages
936 Slab: in-kernel data structures cache
937 SReclaimable: Part of Slab, that might be reclaimed, such as caches
938 SUnreclaim: Part of Slab, that cannot be reclaimed on memory pressure
939 PageTables: amount of memory dedicated to the lowest level of page
941 NFS_Unstable: NFS pages sent to the server, but not yet committed to stable
943 Bounce: Memory used for block device "bounce buffers"
944 WritebackTmp: Memory used by FUSE for temporary writeback buffers
945 CommitLimit: Based on the overcommit ratio ('vm.overcommit_ratio'),
946 this is the total amount of memory currently available to
947 be allocated on the system. This limit is only adhered to
948 if strict overcommit accounting is enabled (mode 2 in
949 'vm.overcommit_memory').
950 The CommitLimit is calculated with the following formula:
951 CommitLimit = ([total RAM pages] - [total huge TLB pages]) *
952 overcommit_ratio / 100 + [total swap pages]
953 For example, on a system with 1G of physical RAM and 7G
954 of swap with a `vm.overcommit_ratio` of 30 it would
955 yield a CommitLimit of 7.3G.
956 For more details, see the memory overcommit documentation
957 in vm/overcommit-accounting.
958 Committed_AS: The amount of memory presently allocated on the system.
959 The committed memory is a sum of all of the memory which
960 has been allocated by processes, even if it has not been
961 "used" by them as of yet. A process which malloc()'s 1G
962 of memory, but only touches 300M of it will show up as
963 using 1G. This 1G is memory which has been "committed" to
964 by the VM and can be used at any time by the allocating
965 application. With strict overcommit enabled on the system
966 (mode 2 in 'vm.overcommit_memory'),allocations which would
967 exceed the CommitLimit (detailed above) will not be permitted.
968 This is useful if one needs to guarantee that processes will
969 not fail due to lack of memory once that memory has been
970 successfully allocated.
971 VmallocTotal: total size of vmalloc memory area
972 VmallocUsed: amount of vmalloc area which is used
973 VmallocChunk: largest contiguous block of vmalloc area which is free
975 ..............................................................................
979 Provides information about vmalloced/vmaped areas. One line per area,
980 containing the virtual address range of the area, size in bytes,
981 caller information of the creator, and optional information depending
982 on the kind of area :
984 pages=nr number of pages
985 phys=addr if a physical address was specified
986 ioremap I/O mapping (ioremap() and friends)
987 vmalloc vmalloc() area
990 vpages buffer for pages pointers was vmalloced (huge area)
991 N<node>=nr (Only on NUMA kernels)
992 Number of pages allocated on memory node <node>
994 > cat /proc/vmallocinfo
995 0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ...
996 /0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
997 0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ...
998 /0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
999 0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f...
1000 phys=7fee8000 ioremap
1001 0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f...
1002 phys=7fee7000 ioremap
1003 0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210
1004 0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ...
1005 /0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
1006 0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ...
1007 pages=2 vmalloc N1=2
1008 0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ...
1009 /0x130 [x_tables] pages=4 vmalloc N0=4
1010 0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ...
1011 pages=14 vmalloc N2=14
1012 0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ...
1013 pages=4 vmalloc N1=4
1014 0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ...
1015 pages=2 vmalloc N1=2
1016 0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ...
1017 pages=10 vmalloc N0=10
1019 ..............................................................................
1023 Provides counts of softirq handlers serviced since boot time, for each cpu.
1025 > cat /proc/softirqs
1028 TIMER: 27166 27120 27097 27034
1033 SCHED: 27035 26983 26971 26746
1035 RCU: 1678 1769 2178 2250
1038 1.3 IDE devices in /proc/ide
1039 ----------------------------
1041 The subdirectory /proc/ide contains information about all IDE devices of which
1042 the kernel is aware. There is one subdirectory for each IDE controller, the
1043 file drivers and a link for each IDE device, pointing to the device directory
1044 in the controller specific subtree.
1046 The file drivers contains general information about the drivers used for the
1049 > cat /proc/ide/drivers
1050 ide-cdrom version 4.53
1051 ide-disk version 1.08
1053 More detailed information can be found in the controller specific
1054 subdirectories. These are named ide0, ide1 and so on. Each of these
1055 directories contains the files shown in table 1-6.
1058 Table 1-6: IDE controller info in /proc/ide/ide?
1059 ..............................................................................
1061 channel IDE channel (0 or 1)
1062 config Configuration (only for PCI/IDE bridge)
1064 model Type/Chipset of IDE controller
1065 ..............................................................................
1067 Each device connected to a controller has a separate subdirectory in the
1068 controllers directory. The files listed in table 1-7 are contained in these
1072 Table 1-7: IDE device information
1073 ..............................................................................
1076 capacity Capacity of the medium (in 512Byte blocks)
1077 driver driver and version
1078 geometry physical and logical geometry
1079 identify device identify block
1081 model device identifier
1082 settings device setup
1083 smart_thresholds IDE disk management thresholds
1084 smart_values IDE disk management values
1085 ..............................................................................
1087 The most interesting file is settings. This file contains a nice overview of
1088 the drive parameters:
1090 # cat /proc/ide/ide0/hda/settings
1091 name value min max mode
1092 ---- ----- --- --- ----
1093 bios_cyl 526 0 65535 rw
1094 bios_head 255 0 255 rw
1095 bios_sect 63 0 63 rw
1096 breada_readahead 4 0 127 rw
1098 file_readahead 72 0 2097151 rw
1100 keepsettings 0 0 1 rw
1101 max_kb_per_request 122 1 127 rw
1105 pio_mode write-only 0 255 w
1111 1.4 Networking info in /proc/net
1112 --------------------------------
1114 The subdirectory /proc/net follows the usual pattern. Table 1-8 shows the
1115 additional values you get for IP version 6 if you configure the kernel to
1116 support this. Table 1-9 lists the files and their meaning.
1119 Table 1-8: IPv6 info in /proc/net
1120 ..............................................................................
1122 udp6 UDP sockets (IPv6)
1123 tcp6 TCP sockets (IPv6)
1124 raw6 Raw device statistics (IPv6)
1125 igmp6 IP multicast addresses, which this host joined (IPv6)
1126 if_inet6 List of IPv6 interface addresses
1127 ipv6_route Kernel routing table for IPv6
1128 rt6_stats Global IPv6 routing tables statistics
1129 sockstat6 Socket statistics (IPv6)
1130 snmp6 Snmp data (IPv6)
1131 ..............................................................................
1134 Table 1-9: Network info in /proc/net
1135 ..............................................................................
1137 arp Kernel ARP table
1138 dev network devices with statistics
1139 dev_mcast the Layer2 multicast groups a device is listening too
1140 (interface index, label, number of references, number of bound
1142 dev_stat network device status
1143 ip_fwchains Firewall chain linkage
1144 ip_fwnames Firewall chain names
1145 ip_masq Directory containing the masquerading tables
1146 ip_masquerade Major masquerading table
1147 netstat Network statistics
1148 raw raw device statistics
1149 route Kernel routing table
1150 rpc Directory containing rpc info
1151 rt_cache Routing cache
1153 sockstat Socket statistics
1156 unix UNIX domain sockets
1157 wireless Wireless interface data (Wavelan etc)
1158 igmp IP multicast addresses, which this host joined
1159 psched Global packet scheduler parameters.
1160 netlink List of PF_NETLINK sockets
1161 ip_mr_vifs List of multicast virtual interfaces
1162 ip_mr_cache List of multicast routing cache
1163 ..............................................................................
1165 You can use this information to see which network devices are available in
1166 your system and how much traffic was routed over those devices:
1169 Inter-|Receive |[...
1170 face |bytes packets errs drop fifo frame compressed multicast|[...
1171 lo: 908188 5596 0 0 0 0 0 0 [...
1172 ppp0:15475140 20721 410 0 0 410 0 0 [...
1173 eth0: 614530 7085 0 0 0 0 0 1 [...
1176 ...] bytes packets errs drop fifo colls carrier compressed
1177 ...] 908188 5596 0 0 0 0 0 0
1178 ...] 1375103 17405 0 0 0 0 0 0
1179 ...] 1703981 5535 0 0 0 3 0 0
1181 In addition, each Channel Bond interface has its own directory. For
1182 example, the bond0 device will have a directory called /proc/net/bond0/.
1183 It will contain information that is specific to that bond, such as the
1184 current slaves of the bond, the link status of the slaves, and how
1185 many times the slaves link has failed.
1190 If you have a SCSI host adapter in your system, you'll find a subdirectory
1191 named after the driver for this adapter in /proc/scsi. You'll also see a list
1192 of all recognized SCSI devices in /proc/scsi:
1194 >cat /proc/scsi/scsi
1196 Host: scsi0 Channel: 00 Id: 00 Lun: 00
1197 Vendor: IBM Model: DGHS09U Rev: 03E0
1198 Type: Direct-Access ANSI SCSI revision: 03
1199 Host: scsi0 Channel: 00 Id: 06 Lun: 00
1200 Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.04
1201 Type: CD-ROM ANSI SCSI revision: 02
1204 The directory named after the driver has one file for each adapter found in
1205 the system. These files contain information about the controller, including
1206 the used IRQ and the IO address range. The amount of information shown is
1207 dependent on the adapter you use. The example shows the output for an Adaptec
1208 AHA-2940 SCSI adapter:
1210 > cat /proc/scsi/aic7xxx/0
1212 Adaptec AIC7xxx driver version: 5.1.19/3.2.4
1214 TCQ Enabled By Default : Disabled
1215 AIC7XXX_PROC_STATS : Disabled
1216 AIC7XXX_RESET_DELAY : 5
1217 Adapter Configuration:
1218 SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
1219 Ultra Wide Controller
1220 PCI MMAPed I/O Base: 0xeb001000
1221 Adapter SEEPROM Config: SEEPROM found and used.
1222 Adaptec SCSI BIOS: Enabled
1224 SCBs: Active 0, Max Active 2,
1225 Allocated 15, HW 16, Page 255
1227 BIOS Control Word: 0x18b6
1228 Adapter Control Word: 0x005b
1229 Extended Translation: Enabled
1230 Disconnect Enable Flags: 0xffff
1231 Ultra Enable Flags: 0x0001
1232 Tag Queue Enable Flags: 0x0000
1233 Ordered Queue Tag Flags: 0x0000
1234 Default Tag Queue Depth: 8
1235 Tagged Queue By Device array for aic7xxx host instance 0:
1236 {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
1237 Actual queue depth per device for aic7xxx host instance 0:
1238 {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
1241 Device using Wide/Sync transfers at 40.0 MByte/sec, offset 8
1242 Transinfo settings: current(12/8/1/0), goal(12/8/1/0), user(12/15/1/0)
1243 Total transfers 160151 (74577 reads and 85574 writes)
1245 Device using Narrow/Sync transfers at 5.0 MByte/sec, offset 15
1246 Transinfo settings: current(50/15/0/0), goal(50/15/0/0), user(50/15/0/0)
1247 Total transfers 0 (0 reads and 0 writes)
1250 1.6 Parallel port info in /proc/parport
1251 ---------------------------------------
1253 The directory /proc/parport contains information about the parallel ports of
1254 your system. It has one subdirectory for each port, named after the port
1257 These directories contain the four files shown in Table 1-10.
1260 Table 1-10: Files in /proc/parport
1261 ..............................................................................
1263 autoprobe Any IEEE-1284 device ID information that has been acquired.
1264 devices list of the device drivers using that port. A + will appear by the
1265 name of the device currently using the port (it might not appear
1267 hardware Parallel port's base address, IRQ line and DMA channel.
1268 irq IRQ that parport is using for that port. This is in a separate
1269 file to allow you to alter it by writing a new value in (IRQ
1271 ..............................................................................
1273 1.7 TTY info in /proc/tty
1274 -------------------------
1276 Information about the available and actually used tty's can be found in the
1277 directory /proc/tty.You'll find entries for drivers and line disciplines in
1278 this directory, as shown in Table 1-11.
1281 Table 1-11: Files in /proc/tty
1282 ..............................................................................
1284 drivers list of drivers and their usage
1285 ldiscs registered line disciplines
1286 driver/serial usage statistic and status of single tty lines
1287 ..............................................................................
1289 To see which tty's are currently in use, you can simply look into the file
1292 > cat /proc/tty/drivers
1293 pty_slave /dev/pts 136 0-255 pty:slave
1294 pty_master /dev/ptm 128 0-255 pty:master
1295 pty_slave /dev/ttyp 3 0-255 pty:slave
1296 pty_master /dev/pty 2 0-255 pty:master
1297 serial /dev/cua 5 64-67 serial:callout
1298 serial /dev/ttyS 4 64-67 serial
1299 /dev/tty0 /dev/tty0 4 0 system:vtmaster
1300 /dev/ptmx /dev/ptmx 5 2 system
1301 /dev/console /dev/console 5 1 system:console
1302 /dev/tty /dev/tty 5 0 system:/dev/tty
1303 unknown /dev/tty 4 1-63 console
1306 1.8 Miscellaneous kernel statistics in /proc/stat
1307 -------------------------------------------------
1309 Various pieces of information about kernel activity are available in the
1310 /proc/stat file. All of the numbers reported in this file are aggregates
1311 since the system first booted. For a quick look, simply cat the file:
1314 cpu 2255 34 2290 22625563 6290 127 456 0 0 0
1315 cpu0 1132 34 1441 11311718 3675 127 438 0 0 0
1316 cpu1 1123 0 849 11313845 2614 0 18 0 0 0
1317 intr 114930548 113199788 3 0 5 263 0 4 [... lots more numbers ...]
1323 softirq 183433 0 21755 12 39 1137 231 21459 2263
1325 The very first "cpu" line aggregates the numbers in all of the other "cpuN"
1326 lines. These numbers identify the amount of time the CPU has spent performing
1327 different kinds of work. Time units are in USER_HZ (typically hundredths of a
1328 second). The meanings of the columns are as follows, from left to right:
1330 - user: normal processes executing in user mode
1331 - nice: niced processes executing in user mode
1332 - system: processes executing in kernel mode
1333 - idle: twiddling thumbs
1334 - iowait: waiting for I/O to complete
1335 - irq: servicing interrupts
1336 - softirq: servicing softirqs
1337 - steal: involuntary wait
1338 - guest: running a normal guest
1339 - guest_nice: running a niced guest
1341 The "intr" line gives counts of interrupts serviced since boot time, for each
1342 of the possible system interrupts. The first column is the total of all
1343 interrupts serviced including unnumbered architecture specific interrupts;
1344 each subsequent column is the total for that particular numbered interrupt.
1345 Unnumbered interrupts are not shown, only summed into the total.
1347 The "ctxt" line gives the total number of context switches across all CPUs.
1349 The "btime" line gives the time at which the system booted, in seconds since
1352 The "processes" line gives the number of processes and threads created, which
1353 includes (but is not limited to) those created by calls to the fork() and
1354 clone() system calls.
1356 The "procs_running" line gives the total number of threads that are
1357 running or ready to run (i.e., the total number of runnable threads).
1359 The "procs_blocked" line gives the number of processes currently blocked,
1360 waiting for I/O to complete.
1362 The "softirq" line gives counts of softirqs serviced since boot time, for each
1363 of the possible system softirqs. The first column is the total of all
1364 softirqs serviced; each subsequent column is the total for that particular
1368 1.9 Ext4 file system parameters
1369 -------------------------------
1371 Information about mounted ext4 file systems can be found in
1372 /proc/fs/ext4. Each mounted filesystem will have a directory in
1373 /proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or
1374 /proc/fs/ext4/dm-0). The files in each per-device directory are shown
1375 in Table 1-12, below.
1377 Table 1-12: Files in /proc/fs/ext4/<devname>
1378 ..............................................................................
1380 mb_groups details of multiblock allocator buddy cache of free blocks
1381 ..............................................................................
1385 Shows registered system console lines.
1387 To see which character device lines are currently used for the system console
1388 /dev/console, you may simply look into the file /proc/consoles:
1390 > cat /proc/consoles
1396 device name of the device
1397 operations R = can do read operations
1398 W = can do write operations
1400 flags E = it is enabled
1401 C = it is preferred console
1402 B = it is primary boot console
1403 p = it is used for printk buffer
1404 b = it is not a TTY but a Braille device
1405 a = it is safe to use when cpu is offline
1406 major:minor major and minor number of the device separated by a colon
1408 ------------------------------------------------------------------------------
1410 ------------------------------------------------------------------------------
1411 The /proc file system serves information about the running system. It not only
1412 allows access to process data but also allows you to request the kernel status
1413 by reading files in the hierarchy.
1415 The directory structure of /proc reflects the types of information and makes
1416 it easy, if not obvious, where to look for specific data.
1417 ------------------------------------------------------------------------------
1419 ------------------------------------------------------------------------------
1420 CHAPTER 2: MODIFYING SYSTEM PARAMETERS
1421 ------------------------------------------------------------------------------
1423 ------------------------------------------------------------------------------
1425 ------------------------------------------------------------------------------
1426 * Modifying kernel parameters by writing into files found in /proc/sys
1427 * Exploring the files which modify certain parameters
1428 * Review of the /proc/sys file tree
1429 ------------------------------------------------------------------------------
1432 A very interesting part of /proc is the directory /proc/sys. This is not only
1433 a source of information, it also allows you to change parameters within the
1434 kernel. Be very careful when attempting this. You can optimize your system,
1435 but you can also cause it to crash. Never alter kernel parameters on a
1436 production system. Set up a development machine and test to make sure that
1437 everything works the way you want it to. You may have no alternative but to
1438 reboot the machine once an error has been made.
1440 To change a value, simply echo the new value into the file. An example is
1441 given below in the section on the file system data. You need to be root to do
1442 this. You can create your own boot script to perform this every time your
1445 The files in /proc/sys can be used to fine tune and monitor miscellaneous and
1446 general things in the operation of the Linux kernel. Since some of the files
1447 can inadvertently disrupt your system, it is advisable to read both
1448 documentation and source before actually making adjustments. In any case, be
1449 very careful when writing to any of these files. The entries in /proc may
1450 change slightly between the 2.1.* and the 2.2 kernel, so if there is any doubt
1451 review the kernel documentation in the directory /usr/src/linux/Documentation.
1452 This chapter is heavily based on the documentation included in the pre 2.2
1453 kernels, and became part of it in version 2.2.1 of the Linux kernel.
1455 Please see: Documentation/sysctl/ directory for descriptions of these
1458 ------------------------------------------------------------------------------
1460 ------------------------------------------------------------------------------
1461 Certain aspects of kernel behavior can be modified at runtime, without the
1462 need to recompile the kernel, or even to reboot the system. The files in the
1463 /proc/sys tree can not only be read, but also modified. You can use the echo
1464 command to write value into these files, thereby changing the default settings
1466 ------------------------------------------------------------------------------
1468 ------------------------------------------------------------------------------
1469 CHAPTER 3: PER-PROCESS PARAMETERS
1470 ------------------------------------------------------------------------------
1472 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
1473 --------------------------------------------------------------------------------
1475 These file can be used to adjust the badness heuristic used to select which
1476 process gets killed in out of memory conditions.
1478 The badness heuristic assigns a value to each candidate task ranging from 0
1479 (never kill) to 1000 (always kill) to determine which process is targeted. The
1480 units are roughly a proportion along that range of allowed memory the process
1481 may allocate from based on an estimation of its current memory and swap use.
1482 For example, if a task is using all allowed memory, its badness score will be
1483 1000. If it is using half of its allowed memory, its score will be 500.
1485 There is an additional factor included in the badness score: the current memory
1486 and swap usage is discounted by 3% for root processes.
1488 The amount of "allowed" memory depends on the context in which the oom killer
1489 was called. If it is due to the memory assigned to the allocating task's cpuset
1490 being exhausted, the allowed memory represents the set of mems assigned to that
1491 cpuset. If it is due to a mempolicy's node(s) being exhausted, the allowed
1492 memory represents the set of mempolicy nodes. If it is due to a memory
1493 limit (or swap limit) being reached, the allowed memory is that configured
1494 limit. Finally, if it is due to the entire system being out of memory, the
1495 allowed memory represents all allocatable resources.
1497 The value of /proc/<pid>/oom_score_adj is added to the badness score before it
1498 is used to determine which task to kill. Acceptable values range from -1000
1499 (OOM_SCORE_ADJ_MIN) to +1000 (OOM_SCORE_ADJ_MAX). This allows userspace to
1500 polarize the preference for oom killing either by always preferring a certain
1501 task or completely disabling it. The lowest possible value, -1000, is
1502 equivalent to disabling oom killing entirely for that task since it will always
1503 report a badness score of 0.
1505 Consequently, it is very simple for userspace to define the amount of memory to
1506 consider for each task. Setting a /proc/<pid>/oom_score_adj value of +500, for
1507 example, is roughly equivalent to allowing the remainder of tasks sharing the
1508 same system, cpuset, mempolicy, or memory controller resources to use at least
1509 50% more memory. A value of -500, on the other hand, would be roughly
1510 equivalent to discounting 50% of the task's allowed memory from being considered
1511 as scoring against the task.
1513 For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
1514 be used to tune the badness score. Its acceptable values range from -16
1515 (OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
1516 (OOM_DISABLE) to disable oom killing entirely for that task. Its value is
1517 scaled linearly with /proc/<pid>/oom_score_adj.
1519 The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
1520 value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
1521 requires CAP_SYS_RESOURCE.
1523 Caveat: when a parent task is selected, the oom killer will sacrifice any first
1524 generation children with separate address spaces instead, if possible. This
1525 avoids servers and important system daemons from being killed and loses the
1526 minimal amount of work.
1529 3.2 /proc/<pid>/oom_score - Display current oom-killer score
1530 -------------------------------------------------------------
1532 This file can be used to check the current score used by the oom-killer is for
1533 any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
1534 process should be killed in an out-of-memory situation.
1537 3.3 /proc/<pid>/io - Display the IO accounting fields
1538 -------------------------------------------------------
1540 This file contains IO statistics for each running process
1545 test:/tmp # dd if=/dev/zero of=/tmp/test.dat &
1548 test:/tmp # cat /proc/3828/io
1554 write_bytes: 323932160
1555 cancelled_write_bytes: 0
1564 I/O counter: chars read
1565 The number of bytes which this task has caused to be read from storage. This
1566 is simply the sum of bytes which this process passed to read() and pread().
1567 It includes things like tty IO and it is unaffected by whether or not actual
1568 physical disk IO was required (the read might have been satisfied from
1575 I/O counter: chars written
1576 The number of bytes which this task has caused, or shall cause to be written
1577 to disk. Similar caveats apply here as with rchar.
1583 I/O counter: read syscalls
1584 Attempt to count the number of read I/O operations, i.e. syscalls like read()
1591 I/O counter: write syscalls
1592 Attempt to count the number of write I/O operations, i.e. syscalls like
1593 write() and pwrite().
1599 I/O counter: bytes read
1600 Attempt to count the number of bytes which this process really did cause to
1601 be fetched from the storage layer. Done at the submit_bio() level, so it is
1602 accurate for block-backed filesystems. <please add status regarding NFS and
1603 CIFS at a later time>
1609 I/O counter: bytes written
1610 Attempt to count the number of bytes which this process caused to be sent to
1611 the storage layer. This is done at page-dirtying time.
1614 cancelled_write_bytes
1615 ---------------------
1617 The big inaccuracy here is truncate. If a process writes 1MB to a file and
1618 then deletes the file, it will in fact perform no writeout. But it will have
1619 been accounted as having caused 1MB of write.
1620 In other words: The number of bytes which this process caused to not happen,
1621 by truncating pagecache. A task can cause "negative" IO too. If this task
1622 truncates some dirty pagecache, some IO which another task has been accounted
1623 for (in its write_bytes) will not be happening. We _could_ just subtract that
1624 from the truncating task's write_bytes, but there is information loss in doing
1631 At its current implementation state, this is a bit racy on 32-bit machines: if
1632 process A reads process B's /proc/pid/io while process B is updating one of
1633 those 64-bit counters, process A could see an intermediate result.
1636 More information about this can be found within the taskstats documentation in
1637 Documentation/accounting.
1639 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
1640 ---------------------------------------------------------------
1641 When a process is dumped, all anonymous memory is written to a core file as
1642 long as the size of the core file isn't limited. But sometimes we don't want
1643 to dump some memory segments, for example, huge shared memory or DAX.
1644 Conversely, sometimes we want to save file-backed memory segments into a core
1645 file, not only the individual files.
1647 /proc/<pid>/coredump_filter allows you to customize which memory segments
1648 will be dumped when the <pid> process is dumped. coredump_filter is a bitmask
1649 of memory types. If a bit of the bitmask is set, memory segments of the
1650 corresponding memory type are dumped, otherwise they are not dumped.
1652 The following 9 memory types are supported:
1653 - (bit 0) anonymous private memory
1654 - (bit 1) anonymous shared memory
1655 - (bit 2) file-backed private memory
1656 - (bit 3) file-backed shared memory
1657 - (bit 4) ELF header pages in file-backed private memory areas (it is
1658 effective only if the bit 2 is cleared)
1659 - (bit 5) hugetlb private memory
1660 - (bit 6) hugetlb shared memory
1661 - (bit 7) DAX private memory
1662 - (bit 8) DAX shared memory
1664 Note that MMIO pages such as frame buffer are never dumped and vDSO pages
1665 are always dumped regardless of the bitmask status.
1667 Note that bits 0-4 don't affect hugetlb or DAX memory. hugetlb memory is
1668 only affected by bit 5-6, and DAX is only affected by bits 7-8.
1670 The default value of coredump_filter is 0x33; this means all anonymous memory
1671 segments, ELF header pages and hugetlb private memory are dumped.
1673 If you don't want to dump all shared memory segments attached to pid 1234,
1674 write 0x31 to the process's proc file.
1676 $ echo 0x31 > /proc/1234/coredump_filter
1678 When a new process is created, the process inherits the bitmask status from its
1679 parent. It is useful to set up coredump_filter before the program runs.
1682 $ echo 0x7 > /proc/self/coredump_filter
1685 3.5 /proc/<pid>/mountinfo - Information about mounts
1686 --------------------------------------------------------
1688 This file contains lines of the form:
1690 36 35 98:0 /mnt1 /mnt2 rw,noatime master:1 - ext3 /dev/root rw,errors=continue
1691 (1)(2)(3) (4) (5) (6) (7) (8) (9) (10) (11)
1693 (1) mount ID: unique identifier of the mount (may be reused after umount)
1694 (2) parent ID: ID of parent (or of self for the top of the mount tree)
1695 (3) major:minor: value of st_dev for files on filesystem
1696 (4) root: root of the mount within the filesystem
1697 (5) mount point: mount point relative to the process's root
1698 (6) mount options: per mount options
1699 (7) optional fields: zero or more fields of the form "tag[:value]"
1700 (8) separator: marks the end of the optional fields
1701 (9) filesystem type: name of filesystem of the form "type[.subtype]"
1702 (10) mount source: filesystem specific information or "none"
1703 (11) super options: per super block options
1705 Parsers should ignore all unrecognised optional fields. Currently the
1706 possible optional fields are:
1708 shared:X mount is shared in peer group X
1709 master:X mount is slave to peer group X
1710 propagate_from:X mount is slave and receives propagation from peer group X (*)
1711 unbindable mount is unbindable
1713 (*) X is the closest dominant peer group under the process's root. If
1714 X is the immediate master of the mount, or if there's no dominant peer
1715 group under the same root, then only the "master:X" field is present
1716 and not the "propagate_from:X" field.
1718 For more information on mount propagation see:
1720 Documentation/filesystems/sharedsubtree.txt
1723 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
1724 --------------------------------------------------------
1725 These files provide a method to access a tasks comm value. It also allows for
1726 a task to set its own or one of its thread siblings comm value. The comm value
1727 is limited in size compared to the cmdline value, so writing anything longer
1728 then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated
1732 3.7 /proc/<pid>/task/<tid>/children - Information about task children
1733 -------------------------------------------------------------------------
1734 This file provides a fast way to retrieve first level children pids
1735 of a task pointed by <pid>/<tid> pair. The format is a space separated
1738 Note the "first level" here -- if a child has own children they will
1739 not be listed here, one needs to read /proc/<children-pid>/task/<tid>/children
1740 to obtain the descendants.
1742 Since this interface is intended to be fast and cheap it doesn't
1743 guarantee to provide precise results and some children might be
1744 skipped, especially if they've exited right after we printed their
1745 pids, so one need to either stop or freeze processes being inspected
1746 if precise results are needed.
1749 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
1750 ---------------------------------------------------------------
1751 This file provides information associated with an opened file. The regular
1752 files have at least three fields -- 'pos', 'flags' and mnt_id. The 'pos'
1753 represents the current offset of the opened file in decimal form [see lseek(2)
1754 for details], 'flags' denotes the octal O_xxx mask the file has been
1755 created with [see open(2) for details] and 'mnt_id' represents mount ID of
1756 the file system containing the opened file [see 3.5 /proc/<pid>/mountinfo
1765 All locks associated with a file descriptor are shown in its fdinfo too.
1767 lock: 1: FLOCK ADVISORY WRITE 359 00:13:11691 0 EOF
1769 The files such as eventfd, fsnotify, signalfd, epoll among the regular pos/flags
1770 pair provide additional information particular to the objects they represent.
1779 where 'eventfd-count' is hex value of a counter.
1786 sigmask: 0000000000000200
1788 where 'sigmask' is hex value of the signal mask associated
1796 tfd: 5 events: 1d data: ffffffffffffffff
1798 where 'tfd' is a target file descriptor number in decimal form,
1799 'events' is events mask being watched and the 'data' is data
1800 associated with a target [see epoll(7) for more details].
1804 For inotify files the format is the following
1808 inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
1810 where 'wd' is a watch descriptor in decimal form, ie a target file
1811 descriptor number, 'ino' and 'sdev' are inode and device where the
1812 target file resides and the 'mask' is the mask of events, all in hex
1813 form [see inotify(7) for more details].
1815 If the kernel was built with exportfs support, the path to the target
1816 file is encoded as a file handle. The file handle is provided by three
1817 fields 'fhandle-bytes', 'fhandle-type' and 'f_handle', all in hex
1820 If the kernel is built without exportfs support the file handle won't be
1823 If there is no inotify mark attached yet the 'inotify' line will be omitted.
1825 For fanotify files the format is
1830 fanotify flags:10 event-flags:0
1831 fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
1832 fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
1834 where fanotify 'flags' and 'event-flags' are values used in fanotify_init
1835 call, 'mnt_id' is the mount point identifier, 'mflags' is the value of
1836 flags associated with mark which are tracked separately from events
1837 mask. 'ino', 'sdev' are target inode and device, 'mask' is the events
1838 mask and 'ignored_mask' is the mask of events which are to be ignored.
1839 All in hex format. Incorporation of 'mflags', 'mask' and 'ignored_mask'
1840 does provide information about flags and mask used in fanotify_mark
1841 call [see fsnotify manpage for details].
1843 While the first three lines are mandatory and always printed, the rest is
1844 optional and may be omitted if no marks created yet.
1855 it_value: (0, 49406829)
1858 where 'clockid' is the clock type and 'ticks' is the number of the timer expirations
1859 that have occurred [see timerfd_create(2) for details]. 'settime flags' are
1860 flags in octal form been used to setup the timer [see timerfd_settime(2) for
1861 details]. 'it_value' is remaining time until the timer exiration.
1862 'it_interval' is the interval for the timer. Note the timer might be set up
1863 with TIMER_ABSTIME option which will be shown in 'settime flags', but 'it_value'
1864 still exhibits timer's remaining time.
1866 3.9 /proc/<pid>/map_files - Information about memory mapped files
1867 ---------------------------------------------------------------------
1868 This directory contains symbolic links which represent memory mapped files
1869 the process is maintaining. Example output:
1871 | lr-------- 1 root root 64 Jan 27 11:24 333c600000-333c620000 -> /usr/lib64/ld-2.18.so
1872 | lr-------- 1 root root 64 Jan 27 11:24 333c81f000-333c820000 -> /usr/lib64/ld-2.18.so
1873 | lr-------- 1 root root 64 Jan 27 11:24 333c820000-333c821000 -> /usr/lib64/ld-2.18.so
1875 | lr-------- 1 root root 64 Jan 27 11:24 35d0421000-35d0422000 -> /usr/lib64/libselinux.so.1
1876 | lr-------- 1 root root 64 Jan 27 11:24 400000-41a000 -> /usr/bin/ls
1878 The name of a link represents the virtual memory bounds of a mapping, i.e.
1879 vm_area_struct::vm_start-vm_area_struct::vm_end.
1881 The main purpose of the map_files is to retrieve a set of memory mapped
1882 files in a fast way instead of parsing /proc/<pid>/maps or
1883 /proc/<pid>/smaps, both of which contain many more records. At the same
1884 time one can open(2) mappings from the listings of two processes and
1885 comparing their inode numbers to figure out which anonymous memory areas
1886 are actually shared.
1888 3.10 /proc/<pid>/timerslack_ns - Task timerslack value
1889 ---------------------------------------------------------
1890 This file provides the value of the task's timerslack value in nanoseconds.
1891 This value specifies a amount of time that normal timers may be deferred
1892 in order to coalesce timers and avoid unnecessary wakeups.
1894 This allows a task's interactivity vs power consumption trade off to be
1897 Writing 0 to the file will set the tasks timerslack to the default value.
1899 Valid values are from 0 - ULLONG_MAX
1901 An application setting the value must have PTRACE_MODE_ATTACH_FSCREDS level
1902 permissions on the task specified to change its timerslack_ns value.
1905 ------------------------------------------------------------------------------
1907 ------------------------------------------------------------------------------
1910 ---------------------
1912 The following mount options are supported:
1914 hidepid= Set /proc/<pid>/ access mode.
1915 gid= Set the group authorized to learn processes information.
1917 hidepid=0 means classic mode - everybody may access all /proc/<pid>/ directories
1920 hidepid=1 means users may not access any /proc/<pid>/ directories but their
1921 own. Sensitive files like cmdline, sched*, status are now protected against
1922 other users. This makes it impossible to learn whether any user runs
1923 specific program (given the program doesn't reveal itself by its behaviour).
1924 As an additional bonus, as /proc/<pid>/cmdline is unaccessible for other users,
1925 poorly written programs passing sensitive information via program arguments are
1926 now protected against local eavesdroppers.
1928 hidepid=2 means hidepid=1 plus all /proc/<pid>/ will be fully invisible to other
1929 users. It doesn't mean that it hides a fact whether a process with a specific
1930 pid value exists (it can be learned by other means, e.g. by "kill -0 $PID"),
1931 but it hides process' uid and gid, which may be learned by stat()'ing
1932 /proc/<pid>/ otherwise. It greatly complicates an intruder's task of gathering
1933 information about running processes, whether some daemon runs with elevated
1934 privileges, whether other user runs some sensitive program, whether other users
1935 run any program at all, etc.
1937 gid= defines a group authorized to learn processes information otherwise
1938 prohibited by hidepid=. If you use some daemon like identd which needs to learn
1939 information about processes information, just add identd to this group.
projects / mirror_ubuntu-zesty-kernel.git / blob