Documentation/hwmon/lm92

   1 Kernel driver lm92
   2 ==================
   3
   4 Supported chips:
   5   * National Semiconductor LM92
   6     Prefix: 'lm92'
   7     Addresses scanned: I2C 0x48 - 0x4b
   8     Datasheet: http://www.national.com/pf/LM/LM92.html
   9   * National Semiconductor LM76
  10     Prefix: 'lm92'
  11     Addresses scanned: none, force parameter needed
  12     Datasheet: http://www.national.com/pf/LM/LM76.html
  13   * Maxim MAX6633/MAX6634/MAX6635
  14     Prefix: 'lm92'
  15     Addresses scanned: I2C 0x48 - 0x4b
  16     MAX6633 with address in 0x40 - 0x47, 0x4c - 0x4f needs force parameter
  17     and MAX6634 with address in 0x4c - 0x4f needs force parameter
  18     Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074
  19
  20 Authors:
  21         Abraham van der Merwe <abraham@2d3d.co.za>
  22         Jean Delvare <jdelvare@suse.de>
  23
  24
  25 Description
  26 -----------
  27
  28 This driver implements support for the National Semiconductor LM92
  29 temperature sensor.
  30
  31 Each LM92 temperature sensor supports a single temperature sensor. There are
  32 alarms for high, low, and critical thresholds. There's also an hysteresis to
  33 control the thresholds for resetting alarms.
  34
  35 Support was added later for the LM76 and Maxim MAX6633/MAX6634/MAX6635,
  36 which are mostly compatible. They have not all been tested, so you
  37 may need to use the force parameter.