Documentation/hwmon/max8688.rst

   1 Kernel driver max8688
   2 =====================
   3
   4 Supported chips:
   5
   6   * Maxim MAX8688
   7
   8     Prefix: 'max8688'
   9
  10     Addresses scanned: -
  11
  12     Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
  13
  14 Author: Guenter Roeck <linux@roeck-us.net>
  15
  16
  17 Description
  18 -----------
  19
  20 This driver supports hardware monitoring for Maxim MAX8688 Digital Power-Supply
  21 Controller/Monitor with PMBus Interface.
  22
  23 The driver is a client driver to the core PMBus driver. Please see
  24 Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
  25
  26
  27 Usage Notes
  28 -----------
  29
  30 This driver does not auto-detect devices. You will have to instantiate the
  31 devices explicitly. Please see Documentation/i2c/instantiating-devices for
  32 details.
  33
  34
  35 Platform data support
  36 ---------------------
  37
  38 The driver supports standard PMBus driver platform data.
  39
  40
  41 Sysfs entries
  42 -------------
  43
  44 The following attributes are supported. Limits are read-write; all other
  45 attributes are read-only.
  46
  47 ======================= ========================================================
  48 in1_label               "vout1"
  49 in1_input               Measured voltage. From READ_VOUT register.
  50 in1_min                 Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
  51 in1_max                 Maximum voltage. From VOUT_OV_WARN_LIMIT register.
  52 in1_lcrit               Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
  53 in1_crit                Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
  54                         register.
  55 in1_min_alarm           Voltage low alarm. From VOLTAGE_UV_WARNING status.
  56 in1_max_alarm           Voltage high alarm. From VOLTAGE_OV_WARNING status.
  57 in1_lcrit_alarm         Voltage critical low alarm. From VOLTAGE_UV_FAULT
  58                         status.
  59 in1_crit_alarm          Voltage critical high alarm. From VOLTAGE_OV_FAULT
  60                         status.
  61 in1_highest             Historical maximum voltage.
  62 in1_reset_history       Write any value to reset history.
  63
  64 curr1_label             "iout1"
  65 curr1_input             Measured current. From READ_IOUT register.
  66 curr1_max               Maximum current. From IOUT_OC_WARN_LIMIT register.
  67 curr1_crit              Critical maximum current. From IOUT_OC_FAULT_LIMIT
  68                         register.
  69 curr1_max_alarm         Current high alarm. From IOUT_OC_WARN_LIMIT register.
  70 curr1_crit_alarm        Current critical high alarm. From IOUT_OC_FAULT status.
  71 curr1_highest           Historical maximum current.
  72 curr1_reset_history     Write any value to reset history.
  73
  74 temp1_input             Measured temperature. From READ_TEMPERATURE_1 register.
  75 temp1_max               Maximum temperature. From OT_WARN_LIMIT register.
  76 temp1_crit              Critical high temperature. From OT_FAULT_LIMIT register.
  77 temp1_max_alarm         Chip temperature high alarm. Set by comparing
  78                         READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
  79                         status is set.
  80 temp1_crit_alarm        Chip temperature critical high alarm. Set by comparing
  81                         READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
  82                         status is set.
  83 temp1_highest           Historical maximum temperature.
  84 temp1_reset_history     Write any value to reset history.
  85 ======================= ========================================================