Documentation/i2c/busses/i2c-ocores

   1 Kernel driver i2c-ocores
   2
   3 Supported adapters:
   4   * OpenCores.org I2C controller by Richard Herveille (see datasheet link)
   5     Datasheet: http://www.opencores.org/projects.cgi/web/i2c/overview
   6
   7 Author: Peter Korsgaard <jacmet@sunsite.dk>
   8
   9 Description
  10 -----------
  11
  12 i2c-ocores is an i2c bus driver for the OpenCores.org I2C controller
  13 IP core by Richard Herveille.
  14
  15 Usage
  16 -----
  17
  18 i2c-ocores uses the platform bus, so you need to provide a struct
  19 platform_device with the base address and interrupt number. The
  20 dev.platform_data of the device should also point to a struct
  21 ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the
  22 distance between registers and the input clock speed.
  23 There is also a possibility to attach a list of i2c_board_info which
  24 the i2c-ocores driver will add to the bus upon creation.
  25
  26 E.G. something like:
  27
  28 static struct resource ocores_resources[] = {
  29         [0] = {
  30                 .start  = MYI2C_BASEADDR,
  31                 .end    = MYI2C_BASEADDR + 8,
  32                 .flags  = IORESOURCE_MEM,
  33         },
  34         [1] = {
  35                 .start  = MYI2C_IRQ,
  36                 .end    = MYI2C_IRQ,
  37                 .flags  = IORESOURCE_IRQ,
  38         },
  39 };
  40
  41 /* optional board info */
  42 struct i2c_board_info ocores_i2c_board_info[] = {
  43         {
  44                 I2C_BOARD_INFO("tsc2003", 0x48),
  45                 .platform_data = &tsc2003_platform_data,
  46                 .irq = TSC_IRQ
  47         },
  48         {
  49                 I2C_BOARD_INFO("adv7180", 0x42 >> 1),
  50                 .irq = ADV_IRQ
  51         }
  52 };
  53
  54 static struct ocores_i2c_platform_data myi2c_data = {
  55         .regstep        = 2,            /* two bytes between registers */
  56         .clock_khz      = 50000,        /* input clock of 50MHz */
  57         .devices        = ocores_i2c_board_info, /* optional table of devices */
  58         .num_devices    = ARRAY_SIZE(ocores_i2c_board_info), /* table size */
  59 };
  60
  61 static struct platform_device myi2c = {
  62         .name                   = "ocores-i2c",
  63         .dev = {
  64                 .platform_data  = &myi2c_data,
  65         },
  66         .num_resources          = ARRAY_SIZE(ocores_resources),
  67         .resource               = ocores_resources,
  68 };