Documentation/scsi/scsi-parameters.txt

   1                           SCSI Kernel Parameters
   2                           ~~~~~~~~~~~~~~~~~~~~~~
   3
   4 See Documentation/kernel-parameters.txt for general information on
   5 specifying module parameters.
   6
   7 This document may not be entirely up to date and comprehensive. The command
   8 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
   9 module. Loadable modules, after being loaded into the running kernel, also
  10 reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
  11 parameters may be changed at runtime by the command
  12 "echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
  13
  14
  15         advansys=       [HW,SCSI]
  16                         See header of drivers/scsi/advansys.c.
  17
  18         aha152x=        [HW,SCSI]
  19                         See Documentation/scsi/aha152x.txt.
  20
  21         aha1542=        [HW,SCSI]
  22                         Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
  23
  24         aic7xxx=        [HW,SCSI]
  25                         See Documentation/scsi/aic7xxx.txt.
  26
  27         aic79xx=        [HW,SCSI]
  28                         See Documentation/scsi/aic79xx.txt.
  29
  30         atascsi=        [HW,SCSI]
  31                         See drivers/scsi/atari_scsi.c.
  32
  33         BusLogic=       [HW,SCSI]
  34                         See drivers/scsi/BusLogic.c, comment before function
  35                         BusLogic_ParseDriverOptions().
  36
  37         dtc3181e=       [HW,SCSI]
  38                         See Documentation/scsi/g_NCR5380.txt.
  39
  40         eata=           [HW,SCSI]
  41
  42         fdomain=        [HW,SCSI]
  43                         See header of drivers/scsi/fdomain.c.
  44
  45         gdth=           [HW,SCSI]
  46                         See header of drivers/scsi/gdth.c.
  47
  48         gvp11=          [HW,SCSI]
  49
  50         in2000=         [HW,SCSI]
  51                         See header of drivers/scsi/in2000.c.
  52
  53         ips=            [HW,SCSI] Adaptec / IBM ServeRAID controller
  54                         See header of drivers/scsi/ips.c.
  55
  56         mac5380=        [HW,SCSI]
  57                         See drivers/scsi/mac_scsi.c.
  58
  59         max_luns=       [SCSI] Maximum number of LUNs to probe.
  60                         Should be between 1 and 2^32-1.
  61
  62         max_report_luns=
  63                         [SCSI] Maximum number of LUNs received.
  64                         Should be between 1 and 16384.
  65
  66         NCR_D700=       [HW,SCSI]
  67                         See header of drivers/scsi/NCR_D700.c.
  68
  69         ncr5380=        [HW,SCSI]
  70                         See Documentation/scsi/g_NCR5380.txt.
  71
  72         ncr53c400=      [HW,SCSI]
  73                         See Documentation/scsi/g_NCR5380.txt.
  74
  75         ncr53c400a=     [HW,SCSI]
  76                         See Documentation/scsi/g_NCR5380.txt.
  77
  78         ncr53c406a=     [HW,SCSI]
  79
  80         ncr53c8xx=      [HW,SCSI]
  81
  82         nodisconnect    [HW,SCSI,M68K] Disables SCSI disconnects.
  83
  84         osst=           [HW,SCSI] SCSI Tape Driver
  85                         Format: <buffer_size>,<write_threshold>
  86                         See also Documentation/scsi/st.txt.
  87
  88         pas16=          [HW,SCSI]
  89                         See header of drivers/scsi/pas16.c.
  90
  91         scsi_debug_*=   [SCSI]
  92                         See drivers/scsi/scsi_debug.c.
  93
  94         scsi_default_dev_flags=
  95                         [SCSI] SCSI default device flags
  96                         Format: <integer>
  97
  98         scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
  99                         Format: <vendor>:<model>:<flags>
 100                         (flags are integer value)
 101
 102         scsi_logging_level=     [SCSI] a bit mask of logging levels
 103                         See drivers/scsi/scsi_logging.h for bits.  Also
 104                         settable via sysctl at dev.scsi.logging_level
 105                         (/proc/sys/dev/scsi/logging_level).
 106                         There is also a nice 'scsi_logging_level' script in the
 107                         S390-tools package, available for download at
 108                         http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
 109
 110         scsi_mod.scan=  [SCSI] sync (default) scans SCSI busses as they are
 111                         discovered.  async scans them in kernel threads,
 112                         allowing boot to proceed.  none ignores them, expecting
 113                         user space to do the scan.
 114
 115         sim710=         [SCSI,HW]
 116                         See header of drivers/scsi/sim710.c.
 117
 118         st=             [HW,SCSI] SCSI tape parameters (buffers, etc.)
 119                         See Documentation/scsi/st.txt.
 120
 121         sym53c416=      [HW,SCSI]
 122                         See header of drivers/scsi/sym53c416.c.
 123
 124         t128=           [HW,SCSI]
 125                         See header of drivers/scsi/t128.c.
 126
 127         tmscsim=        [HW,SCSI]
 128                         See comment before function dc390_setup() in
 129                         drivers/scsi/tmscsim.c.
 130
 131         u14-34f=        [HW,SCSI] UltraStor 14F/34F SCSI host adapter
 132                         See header of drivers/scsi/u14-34f.c.
 133
 134         wd33c93=        [HW,SCSI]
 135                         See header of drivers/scsi/wd33c93.c.
 136
 137         wd7000=         [HW,SCSI]
 138                         See header of drivers/scsi/wd7000.c.