1 # SPDX-License-Identifier: GPL-2.0
9 # To see a list of typical targets execute "make help"
10 # More info can be located in ./README
11 # Comments in this file are targeted only to the developer, do not
12 # expect to learn how to build the kernel reading this file.
14 # That's our default target when none is given on the command line
18 # We are using a recursive build, so we need to do a little thinking
19 # to get the ordering right.
21 # Most importantly: sub-Makefiles should only ever modify files in
22 # their own directory. If in some directory we have a dependency on
23 # a file in another dir (which doesn't happen often, but it's often
24 # unavoidable when linking the built-in.a targets which finally
25 # turn into vmlinux), we will call a sub make in that other dir, and
26 # after that we are sure that everything which is in that other dir
29 # The only cases where we need to modify files which have global
30 # effects are thus separated out and done before the recursive
31 # descending is started. They are now explicitly listed as the
34 ifneq ($(sub_make_done
),1)
36 # Do not use make's built-in rules and variables
37 # (this increases performance and avoids hard-to-debug behaviour)
40 # Avoid funny character set dependencies
44 export LC_COLLATE LC_NUMERIC
46 # Avoid interference with shell env settings
50 # ---------------------------------------------------------------------------
52 # Normally, we echo the whole command before executing it. By making
53 # that echo $($(quiet)$(cmd)), we now have the possibility to set
54 # $(quiet) to choose other forms of output instead, e.g.
56 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
57 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
59 # If $(quiet) is empty, the whole command will be printed.
60 # If it is set to "quiet_", only the short version will be printed.
61 # If it is set to "silent_", nothing will be printed at all, since
62 # the variable $(silent_cmd_cc_o_c) doesn't exist.
64 # A simple variant is to prefix commands with $(Q) - that's useful
65 # for commands that shall be hidden in non-verbose mode.
69 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
70 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
72 # To put more focus on warnings, be less verbose as default
73 # Use 'make V=1' to see the full commands
75 ifeq ("$(origin V)", "command line")
82 ifeq ($(KBUILD_VERBOSE
),1)
90 # If the user is running make -s (silent mode), suppress echoing of
93 ifneq ($(findstring s
,$(filter-out --%,$(MAKEFLAGS
))),)
97 export quiet Q KBUILD_VERBOSE
99 # Kbuild will save output files in the current working directory.
100 # This does not need to match to the root of the kernel source tree.
102 # For example, you can do this:
104 # cd /dir/to/store/output/files; make -f /dir/to/kernel/source/Makefile
106 # If you want to save output files in a different location, there are
107 # two syntaxes to specify it.
110 # Use "make O=dir/to/store/output/files/"
112 # 2) Set KBUILD_OUTPUT
113 # Set the environment variable KBUILD_OUTPUT to point to the output directory.
114 # export KBUILD_OUTPUT=dir/to/store/output/files/; make
116 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
119 # Do we want to change the working directory?
120 ifeq ("$(origin O)", "command line")
121 KBUILD_OUTPUT
:= $(O
)
124 ifneq ($(KBUILD_OUTPUT
),)
125 # Make's built-in functions such as $(abspath ...), $(realpath ...) cannot
126 # expand a shell special character '~'. We use a somewhat tedious way here.
127 abs_objtree
:= $(shell mkdir
-p
$(KBUILD_OUTPUT
) && cd
$(KBUILD_OUTPUT
) && pwd
)
128 $(if
$(abs_objtree
),, \
129 $(error failed to create output directory
"$(KBUILD_OUTPUT)"))
131 # $(realpath ...) resolves symlinks
132 abs_objtree
:= $(realpath
$(abs_objtree
))
134 abs_objtree
:= $(CURDIR
)
135 endif # ifneq ($(KBUILD_OUTPUT),)
137 ifeq ($(abs_objtree
),$(CURDIR
))
138 # Suppress "Entering directory ..." unless we are changing the work directory.
139 MAKEFLAGS
+= --no-print-directory
144 abs_srctree
:= $(realpath
$(dir $(lastword
$(MAKEFILE_LIST
))))
146 ifneq ($(words $(subst :, ,$(abs_srctree
))), 1)
147 $(error source directory cannot contain spaces or colons
)
150 ifneq ($(abs_srctree
),$(abs_objtree
))
151 # Look for make include files relative to root of kernel src
153 # This does not become effective immediately because MAKEFLAGS is re-parsed
154 # once after the Makefile is read. We need to invoke sub-make.
155 MAKEFLAGS
+= --include-dir
=$(abs_srctree
)
159 ifneq ($(filter 3.
%,$(MAKE_VERSION
)),)
160 # 'MAKEFLAGS += -rR' does not immediately become effective for GNU Make 3.x
161 # We need to invoke sub-make to avoid implicit rules in the top Makefile.
163 # Cancel implicit rules for this Makefile.
164 $(lastword
$(MAKEFILE_LIST
)): ;
167 export abs_srctree abs_objtree
168 export sub_make_done
:= 1
170 ifeq ($(need-sub-make
),1)
172 PHONY
+= $(MAKECMDGOALS
) sub-make
174 $(filter-out _all sub-make
$(lastword
$(MAKEFILE_LIST
)), $(MAKECMDGOALS
)) _all
: sub-make
177 # Invoke a second make in the output directory, passing relevant variables
179 $(Q
)$(MAKE
) -C
$(abs_objtree
) -f
$(abs_srctree
)/Makefile
$(MAKECMDGOALS
)
181 endif # need-sub-make
182 endif # sub_make_done
184 # We process the rest of the Makefile if this is the final invocation of make
185 ifeq ($(need-sub-make
),)
187 # Do not print "Entering directory ...",
188 # but we want to display it when entering to the output directory
189 # so that IDEs/editors are able to understand relative filenames.
190 MAKEFLAGS
+= --no-print-directory
192 # Call a source code checker (by default, "sparse") as part of the
195 # Use 'make C=1' to enable checking of only re-compiled files.
196 # Use 'make C=2' to enable checking of *all* source files, regardless
197 # of whether they are re-compiled or not.
199 # See the file "Documentation/dev-tools/sparse.rst" for more details,
200 # including where to get the "sparse" utility.
202 ifeq ("$(origin C)", "command line")
203 KBUILD_CHECKSRC
= $(C
)
205 ifndef KBUILD_CHECKSRC
209 # Use make M=dir to specify directory of external module to build
210 # Old syntax make ... SUBDIRS=$PWD is still supported
211 # Setting the environment variable KBUILD_EXTMOD take precedence
213 $(warning
================= WARNING
================)
214 $(warning
'SUBDIRS' will be removed after Linux
5.3)
216 $(warning If you are building an individual subdirectory
)
217 $(warning in the kernel tree
, you can do like this
:)
218 $(warning
$$ make path
/to
/dir/you
/want
/to
/build
/)
219 $(warning
(Do not forget the trailing slash
))
221 $(warning If you are building an external module
,)
222 $(warning Please use
'M=' or
'KBUILD_EXTMOD' instead
)
223 $(warning
==========================================)
224 KBUILD_EXTMOD ?
= $(SUBDIRS
)
227 ifeq ("$(origin M)", "command line")
228 KBUILD_EXTMOD
:= $(M
)
231 export KBUILD_CHECKSRC KBUILD_EXTMOD
233 ifeq ($(abs_srctree
),$(abs_objtree
))
234 # building in the source tree
236 building_out_of_srctree
:=
238 ifeq ($(abs_srctree
)/,$(dir $(abs_objtree
)))
239 # building in a subdirectory of the source tree
242 srctree
:= $(abs_srctree
)
244 building_out_of_srctree
:= 1
247 ifneq ($(KBUILD_ABS_SRCTREE
),)
248 srctree
:= $(abs_srctree
)
254 export building_out_of_srctree srctree objtree VPATH
256 # To make sure we do not include .config for any of the *config targets
257 # catch them early, and hand them over to scripts/kconfig/Makefile
258 # It is allowed to specify more targets when calling make, including
259 # mixing *config targets and build targets.
260 # For example 'make oldconfig all'.
261 # Detect when mixed targets is specified, and make a second invocation
262 # of make so .config is not included in this case either (for *config).
264 version_h
:= include/generated
/uapi
/linux
/version.h
265 old_version_h
:= include/linux
/version.h
267 clean-targets
:= %clean mrproper cleandocs
268 no-dot-config-targets
:= $(clean-targets
) \
269 cscope gtags TAGS
tags help
% %docs
check% coccicheck \
270 $(version_h
) headers headers_
% archheaders archscripts \
271 %asm-generic kernelversion
%src-pkg
272 no-sync-config-targets
:= $(no-dot-config-targets
) install %install \
280 ifneq ($(filter $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
281 ifeq ($(filter-out $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
286 ifneq ($(filter $(no-sync-config-targets
), $(MAKECMDGOALS
)),)
287 ifeq ($(filter-out $(no-sync-config-targets
), $(MAKECMDGOALS
)),)
292 ifneq ($(KBUILD_EXTMOD
),)
296 ifeq ($(KBUILD_EXTMOD
),)
297 ifneq ($(filter config
%config
,$(MAKECMDGOALS
)),)
299 ifneq ($(words $(MAKECMDGOALS
)),1)
305 # For "make -j clean all", "make -j mrproper defconfig all", etc.
306 ifneq ($(filter $(clean-targets
),$(MAKECMDGOALS
)),)
307 ifneq ($(filter-out $(clean-targets
),$(MAKECMDGOALS
)),)
312 # install and modules_install need also be processed one by one
313 ifneq ($(filter install,$(MAKECMDGOALS
)),)
314 ifneq ($(filter modules_install
,$(MAKECMDGOALS
)),)
319 ifeq ($(mixed-targets
),1)
320 # ===========================================================================
321 # We're called with mixed targets (*config and build targets).
322 # Handle them one by one.
324 PHONY
+= $(MAKECMDGOALS
) __build_one_by_one
326 $(filter-out __build_one_by_one
, $(MAKECMDGOALS
)): __build_one_by_one
331 for i in
$(MAKECMDGOALS
); do \
332 $(MAKE
) -f
$(srctree
)/Makefile
$$i; \
337 include scripts
/Kbuild.
include
339 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
340 KERNELRELEASE
= $(shell cat
include/config
/kernel.release
2> /dev
/null
)
341 KERNELVERSION
= $(VERSION
)$(if
$(PATCHLEVEL
),.
$(PATCHLEVEL
)$(if
$(SUBLEVEL
),.
$(SUBLEVEL
)))$(EXTRAVERSION
)
342 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
344 include scripts
/subarch.
include
346 # Cross compiling and selecting different set of gcc/bin-utils
347 # ---------------------------------------------------------------------------
349 # When performing cross compilation for other architectures ARCH shall be set
350 # to the target architecture. (See arch/* for the possibilities).
351 # ARCH can be set during invocation of make:
353 # Another way is to have ARCH set in the environment.
354 # The default ARCH is the host where make is executed.
356 # CROSS_COMPILE specify the prefix used for all executables used
357 # during compilation. Only gcc and related bin-utils executables
358 # are prefixed with $(CROSS_COMPILE).
359 # CROSS_COMPILE can be set on the command line
360 # make CROSS_COMPILE=ia64-linux-
361 # Alternatively CROSS_COMPILE can be set in the environment.
362 # Default value for CROSS_COMPILE is not to prefix executables
363 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
366 # Architecture as present in compile.h
367 UTS_MACHINE
:= $(ARCH
)
370 # Additional ARCH settings for x86
374 ifeq ($(ARCH
),x86_64
)
378 # Additional ARCH settings for sparc
379 ifeq ($(ARCH
),sparc32
)
382 ifeq ($(ARCH
),sparc64
)
386 # Additional ARCH settings for sh
391 KCONFIG_CONFIG ?
= .config
392 export KCONFIG_CONFIG
394 # SHELL used by kbuild
395 CONFIG_SHELL
:= $(shell if
[ -x
"$$BASH" ]; then echo
$$BASH; \
396 else if
[ -x
/bin
/bash
]; then echo
/bin
/bash
; \
397 else echo sh
; fi
; fi
)
399 HOST_LFS_CFLAGS
:= $(shell getconf LFS_CFLAGS
2>/dev
/null
)
400 HOST_LFS_LDFLAGS
:= $(shell getconf LFS_LDFLAGS
2>/dev
/null
)
401 HOST_LFS_LIBS
:= $(shell getconf LFS_LIBS
2>/dev
/null
)
405 KBUILD_HOSTCFLAGS
:= -Wall
-Wmissing-prototypes
-Wstrict-prototypes
-O2 \
406 -fomit-frame-pointer
-std
=gnu89
$(HOST_LFS_CFLAGS
) \
408 KBUILD_HOSTCXXFLAGS
:= -O2
$(HOST_LFS_CFLAGS
) $(HOSTCXXFLAGS
)
409 KBUILD_HOSTLDFLAGS
:= $(HOST_LFS_LDFLAGS
) $(HOSTLDFLAGS
)
410 KBUILD_HOSTLDLIBS
:= $(HOST_LFS_LIBS
) $(HOSTLDLIBS
)
412 # Make variables (CC, etc...)
413 AS
= $(CROSS_COMPILE
)as
414 LD
= $(CROSS_COMPILE
)ld
415 CC
= $(CROSS_COMPILE
)gcc
417 AR
= $(CROSS_COMPILE
)ar
418 NM
= $(CROSS_COMPILE
)nm
419 STRIP
= $(CROSS_COMPILE
)strip
420 OBJCOPY
= $(CROSS_COMPILE
)objcopy
421 OBJDUMP
= $(CROSS_COMPILE
)objdump
426 INSTALLKERNEL
:= installkernel
427 DEPMOD
= /sbin
/depmod
434 CHECKFLAGS
:= -D__linux__
-Dlinux
-D__STDC__
-Dunix
-D__unix__ \
435 -Wbitwise
-Wno-return-void
-Wno-unknown-attribute
$(CF
)
444 # Use USERINCLUDE when you must reference the UAPI directories only.
446 -I
$(srctree
)/arch
/$(SRCARCH
)/include/uapi \
447 -I
$(objtree
)/arch
/$(SRCARCH
)/include/generated
/uapi \
448 -I
$(srctree
)/include/uapi \
449 -I
$(objtree
)/include/generated
/uapi \
450 -include $(srctree
)/include/linux
/kconfig.h
452 # Use LINUXINCLUDE when you must reference the include/ directory.
453 # Needed to be compatible with the O= option
455 -I
$(srctree
)/arch
/$(SRCARCH
)/include \
456 -I
$(objtree
)/arch
/$(SRCARCH
)/include/generated \
457 $(if
$(building_out_of_srctree
),-I
$(srctree
)/include) \
458 -I
$(objtree
)/include \
461 KBUILD_AFLAGS
:= -D__ASSEMBLY__
-fno-PIE
462 KBUILD_CFLAGS
:= -Wall
-Wundef
-Werror
=strict-prototypes
-Wno-trigraphs \
463 -fno-strict-aliasing
-fno-common
-fshort-wchar
-fno-PIE \
464 -Werror
=implicit-function-declaration
-Werror
=implicit-int \
465 -Wno-format-security \
467 KBUILD_CPPFLAGS
:= -D__KERNEL__
468 KBUILD_AFLAGS_KERNEL
:=
469 KBUILD_CFLAGS_KERNEL
:=
470 KBUILD_AFLAGS_MODULE
:= -DMODULE
471 KBUILD_CFLAGS_MODULE
:= -DMODULE
472 KBUILD_LDFLAGS_MODULE
:= -T
$(srctree
)/scripts
/module-common.lds
474 GCC_PLUGINS_CFLAGS
:=
477 export ARCH SRCARCH CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
478 export CPP AR NM STRIP OBJCOPY OBJDUMP PAHOLE KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
479 export MAKE LEX YACC AWK INSTALLKERNEL PERL PYTHON PYTHON2 PYTHON3 UTS_MACHINE
480 export HOSTCXX KBUILD_HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
482 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
483 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
484 export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE CFLAGS_UBSAN
485 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
486 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
487 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
488 export KBUILD_ARFLAGS
490 # Files to ignore in find ... statements
492 export RCS_FIND_IGNORE
:= \
( -name SCCS
-o
-name BitKeeper
-o
-name .svn
-o \
493 -name CVS
-o
-name .
pc -o
-name .hg
-o
-name .git \
) \
495 export RCS_TAR_IGNORE
:= --exclude SCCS
--exclude BitKeeper
--exclude .svn \
496 --exclude CVS
--exclude .
pc --exclude .hg
--exclude .git
498 # ===========================================================================
499 # Rules shared between *config targets and build targets
501 # Basic helpers built in scripts/basic/
502 PHONY
+= scripts_basic
504 $(Q
)$(MAKE
) $(build
)=scripts
/basic
505 $(Q
)rm -f .tmp_quiet_recordmcount
507 PHONY
+= outputmakefile
508 # outputmakefile generates a Makefile in the output directory, if using a
509 # separate output directory. This allows convenient use of make in the
511 # At the same time when output Makefile generated, generate .gitignore to
512 # ignore whole output directory
514 ifdef building_out_of_srctree
515 $(Q
)ln
-fsn
$(srctree
) source
516 $(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/mkmakefile
$(srctree
)
517 $(Q
)test -e .gitignore || \
518 { echo
"# this is build directory, ignore it"; echo
"*"; } > .gitignore
521 ifneq ($(shell $(CC
) --version
2>&1 | head
-n
1 | grep clang
),)
522 ifneq ($(CROSS_COMPILE
),)
523 CLANG_FLAGS
+= --target
=$(notdir $(CROSS_COMPILE
:%-=%))
524 GCC_TOOLCHAIN_DIR
:= $(dir $(shell which
$(CROSS_COMPILE
)elfedit
))
525 CLANG_FLAGS
+= --prefix=$(GCC_TOOLCHAIN_DIR
)
526 GCC_TOOLCHAIN
:= $(realpath
$(GCC_TOOLCHAIN_DIR
)/..
)
528 ifneq ($(GCC_TOOLCHAIN
),)
529 CLANG_FLAGS
+= --gcc-toolchain
=$(GCC_TOOLCHAIN
)
531 ifeq ($(shell $(AS
) --version
2>&1 | head
-n
1 | grep clang
),)
532 CLANG_FLAGS
+= -no-integrated-as
534 CLANG_FLAGS
+= -Werror
=unknown-warning-option
535 KBUILD_CFLAGS
+= $(CLANG_FLAGS
)
536 KBUILD_AFLAGS
+= $(CLANG_FLAGS
)
540 # The expansion should be delayed until arch/$(SRCARCH)/Makefile is included.
541 # Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile.
542 # CC_VERSION_TEXT is referenced from Kconfig (so it needs export),
543 # and from include/config/auto.conf.cmd to detect the compiler upgrade.
544 CC_VERSION_TEXT
= $(shell $(CC
) --version
2>/dev
/null | head
-n
1)
546 ifeq ($(config-targets
),1)
547 # ===========================================================================
548 # *config targets only - make sure prerequisites are updated, and descend
549 # in scripts/kconfig to make the *config target
551 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
552 # KBUILD_DEFCONFIG may point out an alternative default configuration
553 # used for 'make defconfig'
554 include arch
/$(SRCARCH
)/Makefile
555 export KBUILD_DEFCONFIG KBUILD_KCONFIG CC_VERSION_TEXT
557 config
: scripts_basic outputmakefile FORCE
558 $(Q
)$(MAKE
) $(build
)=scripts
/kconfig
$@
560 %config
: scripts_basic outputmakefile FORCE
561 $(Q
)$(MAKE
) $(build
)=scripts
/kconfig
$@
564 # ===========================================================================
565 # Build targets only - this includes vmlinux, arch specific targets, clean
566 # targets and others. In general all targets except *config targets.
568 # If building an external module we do not care about the all: rule
569 # but instead _all depend on modules
571 ifeq ($(KBUILD_EXTMOD
),)
577 # Decide whether to build built-in, modular, or both.
578 # Normally, just do built-in.
583 # If we have only "make modules", don't compile built-in objects.
584 # When we're building modules with modversions, we need to consider
585 # the built-in objects during the descend as well, in order to
586 # make sure the checksums are up to date before we record them.
588 ifeq ($(MAKECMDGOALS
),modules
)
589 KBUILD_BUILTIN
:= $(if
$(CONFIG_MODVERSIONS
),1)
592 # If we have "make <whatever> modules", compile modules
593 # in addition to whatever we do anyway.
594 # Just "make" or "make all" shall build modules as well
596 ifneq ($(filter all _all modules
,$(MAKECMDGOALS
)),)
600 ifeq ($(MAKECMDGOALS
),)
604 export KBUILD_MODULES KBUILD_BUILTIN
606 ifeq ($(dot-config
),1)
607 include include/config
/auto.conf
610 ifeq ($(KBUILD_EXTMOD
),)
611 # Objects we will link into vmlinux / subdirs we need to visit
613 drivers-y
:= drivers
/ sound
/
614 drivers-
$(CONFIG_SAMPLES
) += samples
/
615 drivers-
$(CONFIG_KERNEL_HEADER_TEST
) += include/
620 endif # KBUILD_EXTMOD
622 # The all: target is the default when no target is given on the
624 # This allow a user to issue only 'make' to build a kernel including modules
625 # Defaults to vmlinux, but the arch makefile usually adds further targets
628 CFLAGS_GCOV
:= -fprofile-arcs
-ftest-coverage \
629 $(call cc-option
,-fno-tree-loop-im
) \
630 $(call cc-disable-warning
,maybe-uninitialized
,)
633 # The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later.
634 ifdef CONFIG_FUNCTION_TRACER
635 CC_FLAGS_FTRACE
:= -pg
638 RETPOLINE_CFLAGS_GCC
:= -mindirect-branch
=thunk-extern
-mindirect-branch-register
639 RETPOLINE_VDSO_CFLAGS_GCC
:= -mindirect-branch
=thunk-inline
-mindirect-branch-register
640 RETPOLINE_CFLAGS_CLANG
:= -mretpoline-external-thunk
641 RETPOLINE_VDSO_CFLAGS_CLANG
:= -mretpoline
642 RETPOLINE_CFLAGS
:= $(call cc-option
,$(RETPOLINE_CFLAGS_GCC
),$(call cc-option
,$(RETPOLINE_CFLAGS_CLANG
)))
643 RETPOLINE_VDSO_CFLAGS
:= $(call cc-option
,$(RETPOLINE_VDSO_CFLAGS_GCC
),$(call cc-option
,$(RETPOLINE_VDSO_CFLAGS_CLANG
)))
644 export RETPOLINE_CFLAGS
645 export RETPOLINE_VDSO_CFLAGS
647 # The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
648 # values of the respective KBUILD_* variables
652 include arch
/$(SRCARCH
)/Makefile
654 ifeq ($(dot-config
),1)
655 ifeq ($(may-sync-config
),1)
656 # Read in dependencies to all Kconfig* files, make sure to run syncconfig if
657 # changes are detected. This should be included after arch/$(SRCARCH)/Makefile
658 # because some architectures define CROSS_COMPILE there.
659 include include/config
/auto.conf.cmd
663 @echo
>&2 '*** Configuration file "$@" not found!'
665 @echo
>&2 '*** Please run some configurator (e.g. "make oldconfig" or'
666 @echo
>&2 '*** "make menuconfig" or "make xconfig").'
670 # The actual configuration files used during the build are stored in
671 # include/generated/ and include/config/. Update them if .config is newer than
672 # include/config/auto.conf (which mirrors .config).
674 # This exploits the 'multi-target pattern rule' trick.
675 # The syncconfig should be executed only once to make all the targets.
676 %/auto.conf
%/auto.conf.cmd
%/tristate.conf
: $(KCONFIG_CONFIG
)
677 $(Q
)$(MAKE
) -f
$(srctree
)/Makefile syncconfig
679 # External modules and some install targets need include/generated/autoconf.h
680 # and include/config/auto.conf but do not care if they are up-to-date.
681 # Use auto.conf to trigger the test
682 PHONY
+= include/config
/auto.conf
684 include/config
/auto.conf
:
685 $(Q
)test -e
include/generated
/autoconf.h
-a
-e
$@ ||
( \
687 echo
>&2 " ERROR: Kernel configuration is invalid."; \
688 echo
>&2 " include/generated/autoconf.h or $@ are missing.";\
689 echo
>&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
693 endif # may-sync-config
694 endif # $(dot-config)
696 KBUILD_CFLAGS
+= $(call cc-option
,-fno-delete-null-pointer-checks
,)
697 KBUILD_CFLAGS
+= $(call cc-disable-warning
,frame-address
,)
698 KBUILD_CFLAGS
+= $(call cc-disable-warning
, format-truncation
)
699 KBUILD_CFLAGS
+= $(call cc-disable-warning
, format-overflow
)
700 KBUILD_CFLAGS
+= $(call cc-disable-warning
, address-of-packed-member
)
702 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
708 ifdef CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED
709 KBUILD_CFLAGS
+= -Wno-maybe-uninitialized
712 # Tell gcc to never replace conditional load with a non-conditional one
713 KBUILD_CFLAGS
+= $(call cc-option
,--param
=allow-store-data-races
=0)
715 include scripts
/Makefile.kcov
716 include scripts
/Makefile.gcc-plugins
718 ifdef CONFIG_READABLE_ASM
719 # Disable optimizations that make assembler listings hard to read.
720 # reorder blocks reorders the control in the function
721 # ipa clone creates specialized cloned functions
722 # partial inlining inlines only parts of functions
723 KBUILD_CFLAGS
+= $(call cc-option
,-fno-reorder-blocks
,) \
724 $(call cc-option
,-fno-ipa-cp-clone
,) \
725 $(call cc-option
,-fno-partial-inlining
)
728 ifneq ($(CONFIG_FRAME_WARN
),0)
729 KBUILD_CFLAGS
+= $(call cc-option
,-Wframe-larger-than
=${CONFIG_FRAME_WARN})
732 stackp-flags-
$(CONFIG_CC_HAS_STACKPROTECTOR_NONE
) := -fno-stack-protector
733 stackp-flags-
$(CONFIG_STACKPROTECTOR
) := -fstack-protector
734 stackp-flags-
$(CONFIG_STACKPROTECTOR_STRONG
) := -fstack-protector-strong
736 KBUILD_CFLAGS
+= $(stackp-flags-y
)
738 ifdef CONFIG_CC_IS_CLANG
739 KBUILD_CPPFLAGS
+= -Qunused-arguments
740 KBUILD_CFLAGS
+= -Wno-format-invalid-specifier
741 KBUILD_CFLAGS
+= -Wno-gnu
742 # Quiet clang warning: comparison of unsigned expression < 0 is always false
743 KBUILD_CFLAGS
+= -Wno-tautological-compare
744 # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
745 # source of a reference will be _MergedGlobals and not on of the whitelisted names.
746 # See modpost pattern 2
747 KBUILD_CFLAGS
+= -mno-global-merge
750 # These warnings generated too much noise in a regular build.
751 # Use make W=1 to enable them (see scripts/Makefile.extrawarn)
752 KBUILD_CFLAGS
+= -Wno-unused-but-set-variable
755 KBUILD_CFLAGS
+= $(call cc-disable-warning
, unused-const-variable
)
756 ifdef CONFIG_FRAME_POINTER
757 KBUILD_CFLAGS
+= -fno-omit-frame-pointer
-fno-optimize-sibling-calls
759 # Some targets (ARM with Thumb2, for example), can't be built with frame
760 # pointers. For those, we don't have FUNCTION_TRACER automatically
761 # select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is
762 # incompatible with -fomit-frame-pointer with current GCC, so we don't use
763 # -fomit-frame-pointer with FUNCTION_TRACER.
764 ifndef CONFIG_FUNCTION_TRACER
765 KBUILD_CFLAGS
+= -fomit-frame-pointer
769 # Initialize all stack variables with a pattern, if desired.
770 ifdef CONFIG_INIT_STACK_ALL
771 KBUILD_CFLAGS
+= -ftrivial-auto-var-init
=pattern
774 DEBUG_CFLAGS
:= $(call cc-option
, -fno-var-tracking-assignments
)
776 ifdef CONFIG_DEBUG_INFO
777 ifdef CONFIG_DEBUG_INFO_SPLIT
778 DEBUG_CFLAGS
+= -gsplit-dwarf
782 KBUILD_AFLAGS
+= -Wa
,-gdwarf-2
784 ifdef CONFIG_DEBUG_INFO_DWARF4
785 DEBUG_CFLAGS
+= -gdwarf-4
788 ifdef CONFIG_DEBUG_INFO_REDUCED
789 DEBUG_CFLAGS
+= $(call cc-option
, -femit-struct-debug-baseonly
) \
790 $(call cc-option
,-fno-var-tracking
)
793 KBUILD_CFLAGS
+= $(DEBUG_CFLAGS
)
796 ifdef CONFIG_FUNCTION_TRACER
797 ifdef CONFIG_FTRACE_MCOUNT_RECORD
798 # gcc 5 supports generating the mcount tables directly
799 ifeq ($(call cc-option-yn
,-mrecord-mcount
),y
)
800 CC_FLAGS_FTRACE
+= -mrecord-mcount
801 export CC_USING_RECORD_MCOUNT
:= 1
803 ifdef CONFIG_HAVE_NOP_MCOUNT
804 ifeq ($(call cc-option-yn
, -mnop-mcount
),y
)
805 CC_FLAGS_FTRACE
+= -mnop-mcount
806 CC_FLAGS_USING
+= -DCC_USING_NOP_MCOUNT
810 ifdef CONFIG_HAVE_FENTRY
811 ifeq ($(call cc-option-yn
, -mfentry
),y
)
812 CC_FLAGS_FTRACE
+= -mfentry
813 CC_FLAGS_USING
+= -DCC_USING_FENTRY
816 export CC_FLAGS_FTRACE
817 KBUILD_CFLAGS
+= $(CC_FLAGS_FTRACE
) $(CC_FLAGS_USING
)
818 KBUILD_AFLAGS
+= $(CC_FLAGS_USING
)
819 ifdef CONFIG_DYNAMIC_FTRACE
820 ifdef CONFIG_HAVE_C_RECORDMCOUNT
821 BUILD_C_RECORDMCOUNT
:= y
822 export BUILD_C_RECORDMCOUNT
827 # We trigger additional mismatches with less inlining
828 ifdef CONFIG_DEBUG_SECTION_MISMATCH
829 KBUILD_CFLAGS
+= $(call cc-option
, -fno-inline-functions-called-once
)
832 ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
833 KBUILD_CFLAGS_KERNEL
+= -ffunction-sections
-fdata-sections
834 LDFLAGS_vmlinux
+= --gc-sections
837 ifdef CONFIG_LIVEPATCH
838 KBUILD_CFLAGS
+= $(call cc-option
, -flive-patching
=inline-clone
)
841 # arch Makefile may override CC so keep this after arch Makefile is included
842 NOSTDINC_FLAGS
+= -nostdinc
-isystem
$(shell $(CC
) -print-file-name
=include)
844 # warn about C99 declaration after statement
845 KBUILD_CFLAGS
+= -Wdeclaration-after-statement
847 # Warn about unmarked fall-throughs in switch statement.
848 KBUILD_CFLAGS
+= $(call cc-option
,-Wimplicit-fallthrough
=3,)
850 # Variable Length Arrays (VLAs) should not be used anywhere in the kernel
851 KBUILD_CFLAGS
+= -Wvla
853 # disable pointer signed / unsigned warnings in gcc 4.0
854 KBUILD_CFLAGS
+= -Wno-pointer-sign
856 # disable stringop warnings in gcc 8+
857 KBUILD_CFLAGS
+= $(call cc-disable-warning
, stringop-truncation
)
859 # disable invalid "can't wrap" optimizations for signed / pointers
860 KBUILD_CFLAGS
+= $(call cc-option
,-fno-strict-overflow
)
862 # clang sets -fmerge-all-constants by default as optimization, but this
863 # is non-conforming behavior for C and in fact breaks the kernel, so we
864 # need to disable it here generally.
865 KBUILD_CFLAGS
+= $(call cc-option
,-fno-merge-all-constants
)
867 # for gcc -fno-merge-all-constants disables everything, but it is fine
868 # to have actual conforming behavior enabled.
869 KBUILD_CFLAGS
+= $(call cc-option
,-fmerge-constants
)
871 # Make sure -fstack-check isn't enabled (like gentoo apparently did)
872 KBUILD_CFLAGS
+= $(call cc-option
,-fno-stack-check
,)
874 # conserve stack if available
875 KBUILD_CFLAGS
+= $(call cc-option
,-fconserve-stack
)
877 # Prohibit date/time macros, which would make the build non-deterministic
878 KBUILD_CFLAGS
+= $(call cc-option
,-Werror
=date-time
)
880 # enforce correct pointer usage
881 KBUILD_CFLAGS
+= $(call cc-option
,-Werror
=incompatible-pointer-types
)
883 # Require designated initializers for all marked structures
884 KBUILD_CFLAGS
+= $(call cc-option
,-Werror
=designated-init
)
886 # change __FILE__ to the relative path from the srctree
887 KBUILD_CFLAGS
+= $(call cc-option
,-fmacro-prefix-map
=$(srctree
)/=)
889 # ensure -fcf-protection is disabled when using retpoline as it is
890 # incompatible with -mindirect-branch=thunk-extern
891 ifdef CONFIG_RETPOLINE
892 KBUILD_CFLAGS
+= $(call cc-option
,-fcf-protection
=none
)
895 # use the deterministic mode of AR if available
896 KBUILD_ARFLAGS
:= $(call ar-option
,D
)
898 include scripts
/Makefile.kasan
899 include scripts
/Makefile.extrawarn
900 include scripts
/Makefile.ubsan
902 # Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the
904 KBUILD_CPPFLAGS
+= $(ARCH_CPPFLAGS
) $(KCPPFLAGS
)
905 KBUILD_AFLAGS
+= $(ARCH_AFLAGS
) $(KAFLAGS
)
906 KBUILD_CFLAGS
+= $(ARCH_CFLAGS
) $(KCFLAGS
)
908 KBUILD_LDFLAGS_MODULE
+= --build-id
909 LDFLAGS_vmlinux
+= --build-id
911 ifeq ($(CONFIG_STRIP_ASM_SYMS
),y
)
912 LDFLAGS_vmlinux
+= $(call ld-option
, -X
,)
915 # insure the checker run with the right endianness
916 CHECKFLAGS
+= $(if
$(CONFIG_CPU_BIG_ENDIAN
),-mbig-endian
,-mlittle-endian
)
918 # the checker needs the correct machine size
919 CHECKFLAGS
+= $(if
$(CONFIG_64BIT
),-m64
,-m32
)
921 # Default kernel image to build when no specific target is given.
922 # KBUILD_IMAGE may be overruled on the command line or
923 # set in the environment
924 # Also any assignments in arch/$(ARCH)/Makefile take precedence over
926 export KBUILD_IMAGE ?
= vmlinux
929 # INSTALL_PATH specifies where to place the updated kernel and system map
930 # images. Default is /boot, but you can set it to other values
931 export INSTALL_PATH ?
= /boot
934 # INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots.
935 # Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as
936 # an argument if needed. Otherwise it defaults to the kernel install path
938 export INSTALL_DTBS_PATH ?
= $(INSTALL_PATH
)/dtbs
/$(KERNELRELEASE
)
941 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
942 # relocations required by build roots. This is not defined in the
943 # makefile but the argument can be passed to make if needed.
946 MODLIB
= $(INSTALL_MOD_PATH
)/lib
/modules
/$(KERNELRELEASE
)
950 # INSTALL_MOD_STRIP, if defined, will cause modules to be
951 # stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
952 # the default option --strip-debug will be used. Otherwise,
953 # INSTALL_MOD_STRIP value will be used as the options to the strip command.
955 ifdef INSTALL_MOD_STRIP
956 ifeq ($(INSTALL_MOD_STRIP
),1)
957 mod_strip_cmd
= $(STRIP
) --strip-debug
959 mod_strip_cmd
= $(STRIP
) $(INSTALL_MOD_STRIP
)
960 endif # INSTALL_MOD_STRIP=1
963 endif # INSTALL_MOD_STRIP
966 # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed
967 # after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP
968 # or CONFIG_MODULE_COMPRESS_XZ.
970 mod_compress_cmd
= true
971 ifdef CONFIG_MODULE_COMPRESS
972 ifdef CONFIG_MODULE_COMPRESS_GZIP
973 mod_compress_cmd
= gzip
-n
-f
974 endif # CONFIG_MODULE_COMPRESS_GZIP
975 ifdef CONFIG_MODULE_COMPRESS_XZ
976 mod_compress_cmd
= xz
-f
977 endif # CONFIG_MODULE_COMPRESS_XZ
978 endif # CONFIG_MODULE_COMPRESS
979 export mod_compress_cmd
981 ifdef CONFIG_MODULE_SIG_ALL
982 $(eval
$(call config_filename
,MODULE_SIG_KEY
))
984 mod_sign_cmd
= scripts
/sign-file
$(CONFIG_MODULE_SIG_HASH
) $(MODULE_SIG_KEY_SRCPREFIX
)$(CONFIG_MODULE_SIG_KEY
) certs
/signing_key.x509
990 HOST_LIBELF_LIBS
= $(shell pkg-config libelf
--libs
2>/dev
/null || echo
-lelf
)
992 ifdef CONFIG_STACK_VALIDATION
993 has_libelf
:= $(call try-run
,\
994 echo
"int main() {}" |
$(HOSTCC
) -xc
-o
/dev
/null
$(HOST_LIBELF_LIBS
) -,1,0)
995 ifeq ($(has_libelf
),1)
996 objtool_target
:= tools
/objtool FORCE
998 SKIP_STACK_VALIDATION
:= 1
999 export SKIP_STACK_VALIDATION
1005 ifeq ($(KBUILD_EXTMOD
),)
1006 core-y
+= kernel
/ certs
/ mm
/ fs
/ ipc
/ security
/ crypto
/ block
/
1008 vmlinux-dirs
:= $(patsubst %/,%,$(filter %/, $(init-y
) $(init-m
) \
1009 $(core-y
) $(core-m
) $(drivers-y
) $(drivers-m
) \
1010 $(net-y
) $(net-m
) $(libs-y
) $(libs-m
) $(virt-y
)))
1012 vmlinux-alldirs
:= $(sort $(vmlinux-dirs
) Documentation \
1013 $(patsubst %/,%,$(filter %/, $(init-
) $(core-
) \
1014 $(drivers-
) $(net-
) $(libs-
) $(virt-
))))
1016 init-y
:= $(patsubst %/, %/built-in.a
, $(init-y
))
1017 core-y
:= $(patsubst %/, %/built-in.a
, $(core-y
))
1018 drivers-y
:= $(patsubst %/, %/built-in.a
, $(drivers-y
))
1019 net-y
:= $(patsubst %/, %/built-in.a
, $(net-y
))
1020 libs-y1
:= $(patsubst %/, %/lib.a
, $(libs-y
))
1021 libs-y2
:= $(patsubst %/, %/built-in.a
, $(filter-out %.a
, $(libs-y
)))
1022 virt-y
:= $(patsubst %/, %/built-in.a
, $(virt-y
))
1024 # Externally visible symbols (used by link-vmlinux.sh)
1025 export KBUILD_VMLINUX_OBJS
:= $(head-y
) $(init-y
) $(core-y
) $(libs-y2
) \
1026 $(drivers-y
) $(net-y
) $(virt-y
)
1027 export KBUILD_VMLINUX_LIBS
:= $(libs-y1
)
1028 export KBUILD_LDS
:= arch
/$(SRCARCH
)/kernel
/vmlinux.lds
1029 export LDFLAGS_vmlinux
1030 # used by scripts/package/Makefile
1031 export KBUILD_ALLDIRS
:= $(sort $(filter-out arch
/%,$(vmlinux-alldirs
)) LICENSES arch
include scripts tools
)
1033 vmlinux-deps
:= $(KBUILD_LDS
) $(KBUILD_VMLINUX_OBJS
) $(KBUILD_VMLINUX_LIBS
)
1035 # Recurse until adjust_autoksyms.sh is satisfied
1036 PHONY
+= autoksyms_recursive
1037 ifdef CONFIG_TRIM_UNUSED_KSYMS
1038 autoksyms_recursive
: $(vmlinux-deps
) modules.order
1039 $(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/adjust_autoksyms.sh \
1040 "$(MAKE) -f $(srctree)/Makefile vmlinux"
1043 # For the kernel to actually contain only the needed exported symbols,
1044 # we have to build modules as well to determine what those symbols are.
1045 # (this can be evaluated only once include/config/auto.conf has been included)
1046 ifdef CONFIG_TRIM_UNUSED_KSYMS
1050 autoksyms_h
:= $(if
$(CONFIG_TRIM_UNUSED_KSYMS
), include/generated
/autoksyms.h
)
1053 $(Q
)mkdir
-p
$(dir $@
)
1056 ARCH_POSTLINK
:= $(wildcard $(srctree
)/arch
/$(SRCARCH
)/Makefile.postlink
)
1058 # Final link of vmlinux with optional arch pass after final link
1059 cmd_link-vmlinux
= \
1060 $(CONFIG_SHELL
) $< $(LD
) $(KBUILD_LDFLAGS
) $(LDFLAGS_vmlinux
) ; \
1061 $(if
$(ARCH_POSTLINK
), $(MAKE
) -f
$(ARCH_POSTLINK
) $@
, true
)
1063 vmlinux
: scripts
/link-vmlinux.sh autoksyms_recursive
$(vmlinux-deps
) FORCE
1064 +$(call if_changed
,link-vmlinux
)
1068 # The actual objects are generated when descending,
1069 # make sure no implicit rule kicks in
1070 $(sort $(vmlinux-deps
)): $(vmlinux-dirs
) ;
1072 # Handle descending into subdirectories listed in $(vmlinux-dirs)
1073 # Preset locale variables to speed up the build process. Limit locale
1074 # tweaks to this spot to avoid wrong language settings when running
1075 # make menuconfig etc.
1076 # Error messages still appears in the original language
1078 PHONY
+= $(vmlinux-dirs
)
1079 $(vmlinux-dirs
): prepare
1080 $(Q
)$(MAKE
) $(build
)=$@ need-builtin
=1 need-modorder
=1
1082 filechk_kernel.release
= \
1083 echo
"$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1085 # Store (new) KERNELRELEASE string in include/config/kernel.release
1086 include/config
/kernel.release
: FORCE
1087 $(call filechk
,kernel.release
)
1089 # Additional helpers built in scripts/
1090 # Carefully list dependencies so we do not try to build scripts twice
1093 scripts
: scripts_basic scripts_dtc
1094 $(Q
)$(MAKE
) $(build
)=$(@
)
1096 # Things we need to do before we recursively start building the kernel
1097 # or the modules are listed in "prepare".
1098 # A multi level approach is used. prepareN is processed before prepareN-1.
1099 # archprepare is used in arch Makefiles and when processed asm symlink,
1100 # version.h and scripts_basic is processed / created.
1102 PHONY
+= prepare archprepare prepare3
1104 # prepare3 is used to check if we are building in a separate output directory,
1106 # 1) Check that make has not been executed in the kernel src $(srctree)
1107 prepare3
: include/config
/kernel.release
1108 ifdef building_out_of_srctree
1109 @
$(kecho
) ' Using $(srctree) as source for kernel'
1110 $(Q
)if
[ -f
$(srctree
)/.config
-o \
1111 -d
$(srctree
)/include/config
-o \
1112 -d
$(srctree
)/arch
/$(SRCARCH
)/include/generated
]; then \
1113 echo
>&2 " $(srctree) is not clean, please run 'make ARCH=$(ARCH) mrproper'"; \
1114 echo
>&2 " in the '$(srctree)' directory.";\
1119 archprepare
: archheaders archscripts scripts prepare3 outputmakefile \
1120 asm-generic
$(version_h
) $(autoksyms_h
) include/generated
/utsrelease.h
1122 prepare0
: archprepare
1123 $(Q
)$(MAKE
) $(build
)=scripts
/mod
1124 $(Q
)$(MAKE
) $(build
)=.
1126 # All the preparing..
1127 prepare
: prepare0 prepare-objtool
1129 # Support for using generic headers in asm-generic
1130 asm-generic
:= -f
$(srctree
)/scripts
/Makefile.asm-generic obj
1132 PHONY
+= asm-generic uapi-asm-generic
1133 asm-generic
: uapi-asm-generic
1134 $(Q
)$(MAKE
) $(asm-generic
)=arch
/$(SRCARCH
)/include/generated
/asm \
1135 generic
=include/asm-generic
1137 $(Q
)$(MAKE
) $(asm-generic
)=arch
/$(SRCARCH
)/include/generated
/uapi
/asm \
1138 generic
=include/uapi
/asm-generic
1140 PHONY
+= prepare-objtool
1141 prepare-objtool
: $(objtool_target
)
1142 ifeq ($(SKIP_STACK_VALIDATION
),1)
1143 ifdef CONFIG_UNWINDER_ORC
1144 @echo
"error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
1147 @echo
"warning: Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
1151 # Generate some files
1152 # ---------------------------------------------------------------------------
1154 # KERNELRELEASE can change from a few different places, meaning version.h
1155 # needs to be updated, so this check is forced on all builds
1158 define filechk_utsrelease.h
1159 if
[ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt
$(uts_len
) ]; then \
1160 echo
'"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
1163 echo \
#define UTS_RELEASE \"$(KERNELRELEASE)\"
1166 define filechk_version.h
1167 echo \
#define LINUX_VERSION_CODE $(shell \
1168 expr
$(VERSION
) \
* 65536 + 0$(PATCHLEVEL
) \
* 256 + 0$(SUBLEVEL
)); \
1169 echo
'#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'
1173 $(call filechk
,version.h
)
1174 $(Q
)rm -f
$(old_version_h
)
1176 include/generated
/utsrelease.h
: include/config
/kernel.release FORCE
1177 $(call filechk
,utsrelease.h
)
1181 $(Q
)find
$(srctree
)/include/ -name
'*.h' | xargs
--max-args
1 \
1182 $(srctree
)/scripts
/headerdep.pl
-I
$(srctree
)/include
1184 # ---------------------------------------------------------------------------
1187 #Default location for installed headers
1188 export INSTALL_HDR_PATH
= $(objtree
)/usr
1190 quiet_cmd_headers_install
= INSTALL
$(INSTALL_HDR_PATH
)/include
1191 cmd_headers_install
= \
1192 mkdir
-p
$(INSTALL_HDR_PATH
); \
1193 rsync
-mrl
--include='*/' --include='*\.h' --exclude
='*' \
1194 usr
/include $(INSTALL_HDR_PATH
)
1196 PHONY
+= headers_install
1197 headers_install
: headers
1198 $(call cmd
,headers_install
)
1200 PHONY
+= archheaders archscripts
1202 hdr-inst
:= -f
$(srctree
)/scripts
/Makefile.headersinst obj
1205 headers
: $(version_h
) scripts_unifdef uapi-asm-generic archheaders archscripts
1206 $(if
$(wildcard $(srctree
)/arch
/$(SRCARCH
)/include/uapi
/asm
/Kbuild
),, \
1207 $(error Headers not exportable for the
$(SRCARCH
) architecture
))
1208 $(Q
)$(MAKE
) $(hdr-inst
)=include/uapi
1209 $(Q
)$(MAKE
) $(hdr-inst
)=arch
/$(SRCARCH
)/include/uapi
1211 PHONY
+= headers_check
1212 headers_check
: headers
1213 $(Q
)$(MAKE
) $(hdr-inst
)=include/uapi HDRCHECK
=1
1214 $(Q
)$(MAKE
) $(hdr-inst
)=arch
/$(SRCARCH
)/include/uapi HDRCHECK
=1
1216 ifdef CONFIG_HEADERS_INSTALL
1220 ifdef CONFIG_HEADERS_CHECK
1224 PHONY
+= scripts_unifdef
1225 scripts_unifdef
: scripts_basic
1226 $(Q
)$(MAKE
) $(build
)=scripts scripts
/unifdef
1228 # ---------------------------------------------------------------------------
1233 $(Q
)$(MAKE
) -C
$(srctree
)/tools
/testing
/selftests run_tests
1235 PHONY
+= kselftest-clean
1237 $(Q
)$(MAKE
) -C
$(srctree
)/tools
/testing
/selftests
clean
1239 PHONY
+= kselftest-merge
1241 $(if
$(wildcard $(objtree
)/.config
),, $(error No .config exists
, config your kernel first
!))
1242 $(Q
)find
$(srctree
)/tools
/testing
/selftests
-name config | \
1243 xargs
$(srctree
)/scripts
/kconfig
/merge_config.sh
-m
$(objtree
)/.config
1244 +$(Q
)$(MAKE
) -f
$(srctree
)/Makefile olddefconfig
1246 # ---------------------------------------------------------------------------
1249 ifneq ($(wildcard $(srctree
)/arch
/$(SRCARCH
)/boot
/dts
/),)
1250 dtstree
:= arch
/$(SRCARCH
)/boot
/dts
1255 %.dtb
: prepare3 scripts_dtc
1256 $(Q
)$(MAKE
) $(build
)=$(dtstree
) $(dtstree
)/$@
1258 PHONY
+= dtbs dtbs_install dt_binding_check
1259 dtbs dtbs_check
: prepare3 scripts_dtc
1260 $(Q
)$(MAKE
) $(build
)=$(dtstree
)
1262 dtbs_check
: export CHECK_DTBS
=1
1263 dtbs_check
: dt_binding_check
1266 $(Q
)$(MAKE
) $(dtbinst
)=$(dtstree
)
1268 ifdef CONFIG_OF_EARLY_FLATTREE
1274 PHONY
+= scripts_dtc
1275 scripts_dtc
: scripts_basic
1276 $(Q
)$(MAKE
) $(build
)=scripts
/dtc
1278 dt_binding_check
: scripts_dtc
1279 $(Q
)$(MAKE
) $(build
)=Documentation
/devicetree
/bindings
1281 # ---------------------------------------------------------------------------
1284 ifdef CONFIG_MODULES
1286 # By default, build modules as well
1292 # A module can be listed more than once in obj-m resulting in
1293 # duplicate lines in modules.order files. Those are removed
1294 # using awk while concatenating to the final file.
1297 modules
: $(if
$(KBUILD_BUILTIN
),vmlinux
) modules.order modules.builtin
1298 @
$(kecho
) ' Building modules, stage 2.';
1299 $(Q
)$(MAKE
) -f
$(srctree
)/scripts
/Makefile.modpost
1300 $(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/modules-check.sh
1302 modules.order
: $(vmlinux-dirs
)
1303 $(Q
)$(AWK
) '!x[$$0]++' $(addsuffix /$@
, $(vmlinux-dirs
)) > $@
1305 modbuiltin-dirs
:= $(addprefix _modbuiltin_
, $(vmlinux-dirs
))
1307 modules.builtin
: $(modbuiltin-dirs
)
1308 $(Q
)$(AWK
) '!x[$$0]++' $(addsuffix /$@
, $(vmlinux-dirs
)) > $@
1310 PHONY
+= $(modbuiltin-dirs
)
1311 # tristate.conf is not included from this Makefile. Add it as a prerequisite
1312 # here to make it self-healing in case somebody accidentally removes it.
1313 $(modbuiltin-dirs
): include/config
/tristate.conf
1314 $(Q
)$(MAKE
) $(modbuiltin
)=$(patsubst _modbuiltin_
%,%,$@
)
1316 # Target to prepare building external modules
1317 PHONY
+= modules_prepare
1318 modules_prepare
: prepare
1320 # Target to install modules
1321 PHONY
+= modules_install
1322 modules_install
: _modinst_ _modinst_post
1326 @
rm -rf
$(MODLIB
)/kernel
1327 @
rm -f
$(MODLIB
)/source
1328 @mkdir
-p
$(MODLIB
)/kernel
1329 @ln
-s
$(abspath
$(srctree
)) $(MODLIB
)/source
1330 @if
[ ! $(objtree
) -ef
$(MODLIB
)/build
]; then \
1331 rm -f
$(MODLIB
)/build
; \
1332 ln
-s
$(CURDIR
) $(MODLIB
)/build
; \
1334 @sed
's:^:kernel/:' modules.order
> $(MODLIB
)/modules.order
1335 @sed
's:^:kernel/:' modules.builtin
> $(MODLIB
)/modules.builtin
1336 @cp
-f
$(objtree
)/modules.builtin.modinfo
$(MODLIB
)/
1337 $(Q
)$(MAKE
) -f
$(srctree
)/scripts
/Makefile.modinst
1339 # This depmod is only for convenience to give the initial
1340 # boot a modules.dep even before / is mounted read-write. However the
1341 # boot script depmod is the master version.
1342 PHONY
+= _modinst_post
1343 _modinst_post
: _modinst_
1346 ifeq ($(CONFIG_MODULE_SIG
), y
)
1347 PHONY
+= modules_sign
1349 $(Q
)$(MAKE
) -f
$(srctree
)/scripts
/Makefile.modsign
1352 else # CONFIG_MODULES
1354 # Modules not configured
1355 # ---------------------------------------------------------------------------
1357 PHONY
+= modules modules_install
1358 modules modules_install
:
1360 @echo
>&2 "The present kernel configuration has modules disabled."
1361 @echo
>&2 "Type 'make config' and enable loadable module support."
1362 @echo
>&2 "Then build a kernel with module support enabled."
1366 endif # CONFIG_MODULES
1369 # Cleaning is done on three levels.
1370 # make clean Delete most generated files
1371 # Leave enough to build external modules
1372 # make mrproper Delete the current configuration, and all generated files
1373 # make distclean Remove editor backup files, patch leftover files and the like
1375 # Directories & files removed with 'make clean'
1376 CLEAN_DIRS
+= include/ksym
1377 CLEAN_FILES
+= modules.builtin.modinfo
1379 # Directories & files removed with 'make mrproper'
1380 MRPROPER_DIRS
+= include/config
include/generated \
1381 arch
/$(SRCARCH
)/include/generated .tmp_objdiff
1382 MRPROPER_FILES
+= .config .config.old .version \
1384 signing_key.pem signing_key.priv signing_key.x509 \
1385 x509.genkey extra_certificates signing_key.x509.keyid \
1386 signing_key.x509.signer vmlinux-gdb.py
1388 # Directories & files removed with 'make distclean'
1390 DISTCLEAN_FILES
+= tags TAGS cscope
* GPATH GTAGS GRTAGS GSYMS
1392 # clean - Delete most, but leave enough to build external modules
1394 clean: rm-dirs
:= $(CLEAN_DIRS
)
1395 clean: rm-files
:= $(CLEAN_FILES
)
1396 clean-dirs
:= $(addprefix _clean_
, .
$(vmlinux-alldirs
))
1398 PHONY
+= $(clean-dirs
) clean archclean vmlinuxclean
1400 $(Q
)$(MAKE
) $(clean)=$(patsubst _clean_
%,%,$@
)
1403 $(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/link-vmlinux.sh
clean
1404 $(Q
)$(if
$(ARCH_POSTLINK
), $(MAKE
) -f
$(ARCH_POSTLINK
) clean)
1406 clean: archclean vmlinuxclean
1408 # mrproper - Delete all generated files, including .config
1410 mrproper
: rm-dirs
:= $(wildcard $(MRPROPER_DIRS
))
1411 mrproper
: rm-files
:= $(wildcard $(MRPROPER_FILES
))
1412 mrproper-dirs
:= $(addprefix _mrproper_
,scripts
)
1414 PHONY
+= $(mrproper-dirs
) mrproper
1416 $(Q
)$(MAKE
) $(clean)=$(patsubst _mrproper_
%,%,$@
)
1418 mrproper
: clean $(mrproper-dirs
)
1424 distclean: rm-dirs
:= $(wildcard $(DISTCLEAN_DIRS
))
1425 distclean: rm-files
:= $(wildcard $(DISTCLEAN_FILES
))
1432 @find
$(srctree
) $(RCS_FIND_IGNORE
) \
1433 \
( -name
'*.orig' -o
-name
'*.rej' -o
-name
'*~' \
1434 -o
-name
'*.bak' -o
-name
'#*#' -o
-name
'*%' \
1435 -o
-name
'core' \
) \
1436 -type f
-print | xargs
rm -f
1439 # Packaging of the kernel to various formats
1440 # ---------------------------------------------------------------------------
1441 package-dir
:= scripts
/package
1444 $(Q
)$(MAKE
) $(build
)=$(package-dir
) $@
1445 %pkg
: include/config
/kernel.release FORCE
1446 $(Q
)$(MAKE
) $(build
)=$(package-dir
) $@
1449 # Brief documentation of the typical targets used
1450 # ---------------------------------------------------------------------------
1452 boards
:= $(wildcard $(srctree
)/arch
/$(SRCARCH
)/configs
/*_defconfig
)
1453 boards
:= $(sort $(notdir $(boards
)))
1454 board-dirs
:= $(dir $(wildcard $(srctree
)/arch
/$(SRCARCH
)/configs
/*/*_defconfig
))
1455 board-dirs
:= $(sort $(notdir $(board-dirs
:/=)))
1459 @echo
'Cleaning targets:'
1460 @echo
' clean - Remove most generated files but keep the config and'
1461 @echo
' enough build support to build external modules'
1462 @echo
' mrproper - Remove all generated files + config + various backup files'
1463 @echo
' distclean - mrproper + remove editor backup and patch files'
1465 @echo
'Configuration targets:'
1466 @
$(MAKE
) -f
$(srctree
)/scripts
/kconfig
/Makefile help
1468 @echo
'Other generic targets:'
1469 @echo
' all - Build all targets marked with [*]'
1470 @echo
'* vmlinux - Build the bare kernel'
1471 @echo
'* modules - Build all modules'
1472 @echo
' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1473 @echo
' dir/ - Build all files in dir and below'
1474 @echo
' dir/file.[ois] - Build specified target only'
1475 @echo
' dir/file.ll - Build the LLVM assembly file'
1476 @echo
' (requires compiler support for LLVM assembly generation)'
1477 @echo
' dir/file.lst - Build specified mixed source/assembly target only'
1478 @echo
' (requires a recent binutils and recent build (System.map))'
1479 @echo
' dir/file.ko - Build module including final link'
1480 @echo
' modules_prepare - Set up for building external modules'
1481 @echo
' tags/TAGS - Generate tags file for editors'
1482 @echo
' cscope - Generate cscope index'
1483 @echo
' gtags - Generate GNU GLOBAL index'
1484 @echo
' kernelrelease - Output the release version string (use with make -s)'
1485 @echo
' kernelversion - Output the version stored in Makefile (use with make -s)'
1486 @echo
' image_name - Output the image name (use with make -s)'
1487 @echo
' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1488 echo
' (default: $(INSTALL_HDR_PATH))'; \
1490 @echo
'Static analysers:'
1491 @echo
' checkstack - Generate a list of stack hogs'
1492 @echo
' namespacecheck - Name space analysis on compiled kernel'
1493 @echo
' versioncheck - Sanity check on version.h usage'
1494 @echo
' includecheck - Check for duplicate included header files'
1495 @echo
' export_report - List the usages of all exported symbols'
1496 @echo
' headers_check - Sanity check on exported headers'
1497 @echo
' headerdep - Detect inclusion cycles in headers'
1498 @echo
' coccicheck - Check with Coccinelle'
1500 @echo
'Kernel selftest:'
1501 @echo
' kselftest - Build and run kernel selftest (run as root)'
1502 @echo
' Build, install, and boot kernel before'
1503 @echo
' running kselftest on it'
1504 @echo
' kselftest-clean - Remove all generated kselftest files'
1505 @echo
' kselftest-merge - Merge all the config dependencies of kselftest to existing'
1509 echo
'Devicetree:'; \
1510 echo
'* dtbs - Build device tree blobs for enabled boards'; \
1511 echo
' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \
1514 @echo
'Userspace tools targets:'
1515 @echo
' use "make tools/help"'
1516 @echo
' or "cd tools; make help"'
1518 @echo
'Kernel packaging:'
1519 @
$(MAKE
) $(build
)=$(package-dir
) help
1521 @echo
'Documentation targets:'
1522 @
$(MAKE
) -f
$(srctree
)/Documentation
/Makefile dochelp
1524 @echo
'Architecture specific targets ($(SRCARCH)):'
1525 @
$(if
$(archhelp
),$(archhelp
),\
1526 echo
' No architecture specific help defined for $(SRCARCH)')
1529 $(foreach b
, $(boards
), \
1530 printf
" %-24s - Build for %s\\n" $(b
) $(subst _defconfig
,,$(b
));) \
1532 @
$(if
$(board-dirs
), \
1533 $(foreach b
, $(board-dirs
), \
1534 printf
" %-16s - Show %s-specific targets\\n" help-
$(b
) $(b
);) \
1535 printf
" %-16s - Show all of the above\\n" help-boards
; \
1538 @echo
' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1539 @echo
' make V=2 [targets] 2 => give reason for rebuild of target'
1540 @echo
' make O=dir [targets] Locate all output files in "dir", including .config'
1541 @echo
' make C=1 [targets] Check re-compiled c source with $$CHECK (sparse by default)'
1542 @echo
' make C=2 [targets] Force check of all c source with $$CHECK'
1543 @echo
' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1544 @echo
' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1545 @echo
' 1: warnings which may be relevant and do not occur too often'
1546 @echo
' 2: warnings which occur quite often but may still be relevant'
1547 @echo
' 3: more obscure warnings, can most likely be ignored'
1548 @echo
' Multiple levels can be combined with W=12 or W=123'
1550 @echo
'Execute "make" or "make all" to build all targets marked with [*] '
1551 @echo
'For further info see the ./README file'
1554 help-board-dirs
:= $(addprefix help-
,$(board-dirs
))
1556 help-boards
: $(help-board-dirs
)
1558 boards-per-dir
= $(sort $(notdir $(wildcard $(srctree
)/arch
/$(SRCARCH
)/configs
/$*/*_defconfig
)))
1560 $(help-board-dirs
): help-
%:
1561 @echo
'Architecture specific targets ($(SRCARCH) $*):'
1562 @
$(if
$(boards-per-dir
), \
1563 $(foreach b
, $(boards-per-dir
), \
1564 printf
" %-24s - Build for %s\\n" $*/$(b
) $(subst _defconfig
,,$(b
));) \
1568 # Documentation targets
1569 # ---------------------------------------------------------------------------
1570 DOC_TARGETS
:= xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
1571 linkcheckdocs dochelp refcheckdocs
1572 PHONY
+= $(DOC_TARGETS
)
1573 $(DOC_TARGETS
): scripts_basic FORCE
1574 $(Q
)$(MAKE
) $(build
)=Documentation
$@
1577 # ---------------------------------------------------------------------------
1579 PHONY
+= scripts_gdb
1580 scripts_gdb
: prepare0
1581 $(Q
)$(MAKE
) $(build
)=scripts
/gdb
1582 $(Q
)ln
-fsn
$(abspath
$(srctree
)/scripts
/gdb
/vmlinux-gdb.py
)
1584 ifdef CONFIG_GDB_SCRIPTS
1588 else # KBUILD_EXTMOD
1591 # External module support.
1592 # When building external modules the kernel used as basis is considered
1593 # read-only, and no consistency checks are made and the make
1594 # system is not used on the basis kernel. If updates are required
1595 # in the basis kernel ordinary make commands (without M=...) must
1598 # The following are the only valid targets when building external
1600 # make M=dir clean Delete all automatically generated files
1601 # make M=dir modules Make all modules in specified dir
1602 # make M=dir Same as 'make M=dir modules'
1603 # make M=dir modules_install
1604 # Install the modules built in the module directory
1605 # Assumes install directory is already created
1607 # We are always building modules
1610 PHONY
+= $(objtree
)/Module.symvers
1611 $(objtree
)/Module.symvers
:
1612 @
test -e
$(objtree
)/Module.symvers ||
( \
1614 echo
" WARNING: Symbol version dump $(objtree)/Module.symvers"; \
1615 echo
" is missing; modules will have no dependencies and modversions."; \
1618 module-dirs
:= $(addprefix _module_
,$(KBUILD_EXTMOD
))
1619 PHONY
+= $(module-dirs
) modules
1620 $(module-dirs
): prepare
$(objtree
)/Module.symvers
1621 $(Q
)$(MAKE
) $(build
)=$(patsubst _module_
%,%,$@
) need-modorder
=1
1623 modules
: $(module-dirs
)
1624 @
$(kecho
) ' Building modules, stage 2.';
1625 $(Q
)$(MAKE
) -f
$(srctree
)/scripts
/Makefile.modpost
1627 PHONY
+= modules_install
1628 modules_install
: _emodinst_ _emodinst_post
1630 install-dir
:= $(if
$(INSTALL_MOD_DIR
),$(INSTALL_MOD_DIR
),extra
)
1633 $(Q
)mkdir
-p
$(MODLIB
)/$(install-dir
)
1634 $(Q
)$(MAKE
) -f
$(srctree
)/scripts
/Makefile.modinst
1636 PHONY
+= _emodinst_post
1637 _emodinst_post
: _emodinst_
1640 clean-dirs
:= $(addprefix _clean_
,$(KBUILD_EXTMOD
))
1642 PHONY
+= $(clean-dirs
) clean
1644 $(Q
)$(MAKE
) $(clean)=$(patsubst _clean_
%,%,$@
)
1646 clean: rm-files
:= $(KBUILD_EXTMOD
)/Module.symvers
1650 @echo
' Building external modules.'
1651 @echo
' Syntax: make -C path/to/kernel/src M=$$PWD target'
1653 @echo
' modules - default target, build the module(s)'
1654 @echo
' modules_install - install the module'
1655 @echo
' clean - remove generated files in module directory only'
1659 endif # KBUILD_EXTMOD
1661 clean: $(clean-dirs
)
1664 @find
$(if
$(KBUILD_EXTMOD
), $(KBUILD_EXTMOD
), .
) $(RCS_FIND_IGNORE
) \
1665 \
( -name
'*.[aios]' -o
-name
'*.ko' -o
-name
'.*.cmd' \
1667 -o
-name
'*.dtb' -o
-name
'*.dtb.S' -o
-name
'*.dt.yaml' \
1668 -o
-name
'*.dwo' -o
-name
'*.lst' \
1669 -o
-name
'*.su' -o
-name
'*.mod' \
1670 -o
-name
'.*.d' -o
-name
'.*.tmp' -o
-name
'*.mod.c' \
1671 -o
-name
'*.lex.c' -o
-name
'*.tab.[ch]' \
1672 -o
-name
'*.asn1.[ch]' \
1673 -o
-name
'*.symtypes' -o
-name
'modules.order' \
1674 -o
-name modules.builtin
-o
-name
'.tmp_*.o.*' \
1675 -o
-name
'*.c.[012]*.*' \
1677 -o
-name
'*.gcno' \
) -type f
-print | xargs
rm -f
1679 # Generate tags for editors
1680 # ---------------------------------------------------------------------------
1681 quiet_cmd_tags
= GEN
$@
1682 cmd_tags
= $(CONFIG_SHELL
) $(srctree
)/scripts
/tags.sh
$@
1684 tags TAGS cscope gtags
: FORCE
1687 # Scripts to check various things for consistency
1688 # ---------------------------------------------------------------------------
1690 PHONY
+= includecheck versioncheck coccicheck namespacecheck export_report
1693 find
$(srctree
)/* $(RCS_FIND_IGNORE
) \
1694 -name
'*.[hcS]' -type f
-print |
sort \
1695 | xargs
$(PERL
) -w
$(srctree
)/scripts
/checkincludes.pl
1698 find
$(srctree
)/* $(RCS_FIND_IGNORE
) \
1699 -name
'*.[hcS]' -type f
-print |
sort \
1700 | xargs
$(PERL
) -w
$(srctree
)/scripts
/checkversion.pl
1703 $(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/$@
1706 $(PERL
) $(srctree
)/scripts
/namespace.pl
1709 $(PERL
) $(srctree
)/scripts
/export_report.pl
1711 PHONY
+= checkstack kernelrelease kernelversion image_name
1713 # UML needs a little special treatment here. It wants to use the host
1714 # toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone
1715 # else wants $(ARCH), including people doing cross-builds, which means
1716 # that $(SUBARCH) doesn't work here.
1718 CHECKSTACK_ARCH
:= $(SUBARCH
)
1720 CHECKSTACK_ARCH
:= $(ARCH
)
1723 $(OBJDUMP
) -d vmlinux
$$(find .
-name
'*.ko') | \
1724 $(PERL
) $(srctree
)/scripts
/checkstack.pl
$(CHECKSTACK_ARCH
)
1727 @echo
"$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1730 @echo
$(KERNELVERSION
)
1733 @echo
$(KBUILD_IMAGE
)
1735 # Clear a bunch of variables before executing the submake
1737 ifeq ($(quiet
),silent_
)
1742 $(Q
)mkdir
-p
$(objtree
)/tools
1743 $(Q
)$(MAKE
) LDFLAGS
= MAKEFLAGS
="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O
=$(abspath
$(objtree
)) subdir
=tools
-C
$(srctree
)/tools
/
1746 $(Q
)mkdir
-p
$(objtree
)/tools
1747 $(Q
)$(MAKE
) LDFLAGS
= MAKEFLAGS
="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O
=$(abspath
$(objtree
)) subdir
=tools
-C
$(srctree
)/tools
/ $*
1750 # ---------------------------------------------------------------------------
1751 # Single targets are compatible with:
1752 # - build with mixed source and output
1753 # - build with separate output dir 'make O=...'
1754 # - external modules
1756 # target-dir => where to store outputfile
1757 # build-dir => directory in kernel source tree to use
1759 build-target
= $(if
$(KBUILD_EXTMOD
), $(KBUILD_EXTMOD
)/)$@
1760 build-dir
= $(patsubst %/,%,$(dir $(build-target
)))
1763 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(build-target
)
1765 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(build-target
)
1766 %.lst
: prepare FORCE
1767 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(build-target
)
1769 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(build-target
)
1771 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(build-target
)
1772 %.symtypes
: prepare FORCE
1773 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(build-target
)
1780 $(Q
)$(MAKE
) KBUILD_MODULES
=1 $(build
)=$(build-dir
)
1782 # FIXME Should go into a make.lib or something
1783 # ===========================================================================
1785 quiet_cmd_rmdirs
= $(if
$(wildcard $(rm-dirs
)),CLEAN
$(wildcard $(rm-dirs
)))
1786 cmd_rmdirs
= rm -rf
$(rm-dirs
)
1788 quiet_cmd_rmfiles
= $(if
$(wildcard $(rm-files
)),CLEAN
$(wildcard $(rm-files
)))
1789 cmd_rmfiles
= rm -f
$(rm-files
)
1791 # Run depmod only if we have System.map and depmod is executable
1792 quiet_cmd_depmod
= DEPMOD
$(KERNELRELEASE
)
1793 cmd_depmod
= $(CONFIG_SHELL
) $(srctree
)/scripts
/depmod.sh
$(DEPMOD
) \
1796 # read saved command lines for existing targets
1797 existing-targets
:= $(wildcard $(sort $(targets
)))
1799 -include $(foreach f
,$(existing-targets
),$(dir $(f
)).
$(notdir $(f
)).cmd
)
1801 endif # ifeq ($(config-targets),1)
1802 endif # ifeq ($(mixed-targets),1)
1803 endif # need-sub-make
1808 # Declare the contents of the PHONY variable as phony. We keep that
1809 # information in a variable so we can use it in if_changed and friends.