Makefile

   1 # Makefile for QEMU.
   2
   3 ifneq ($(words $(subst :, ,$(CURDIR))), 1)
   4   $(error main directory cannot contain spaces nor colons)
   5 endif
   6
   7 # Always point to the root of the build tree (needs GNU make).
   8 BUILD_DIR=$(CURDIR)
   9
  10 # Before including a proper config-host.mak, assume we are in the source tree
  11 SRC_PATH=.
  12
  13 UNCHECKED_GOALS := %clean TAGS cscope ctags dist \
  14     html info pdf txt \
  15     help check-help print-% \
  16     docker docker-% vm-help vm-test vm-build-%
  17
  18 # All following code might depend on configuration variables
  19 ifneq ($(wildcard config-host.mak),)
  20 # Put the all: rule here so that config-host.mak can contain dependencies.
  21 all:
  22 include config-host.mak
  23
  24 git-submodule-update:
  25
  26 .PHONY: git-submodule-update
  27
  28 git_module_status := $(shell \
  29   cd '$(SRC_PATH)' && \
  30   GIT="$(GIT)" ./scripts/git-submodule.sh status $(GIT_SUBMODULES); \
  31   echo $$?; \
  32 )
  33
  34 ifeq (1,$(git_module_status))
  35 ifeq (no,$(GIT_UPDATE))
  36 git-submodule-update:
  37         $(call quiet-command, \
  38             echo && \
  39             echo "GIT submodule checkout is out of date. Please run" && \
  40             echo "  scripts/git-submodule.sh update $(GIT_SUBMODULES)" && \
  41             echo "from the source directory checkout $(SRC_PATH)" && \
  42             echo && \
  43             exit 1)
  44 else
  45 git-submodule-update:
  46         $(call quiet-command, \
  47           (cd $(SRC_PATH) && GIT="$(GIT)" ./scripts/git-submodule.sh update $(GIT_SUBMODULES)), \
  48           "GIT","$(GIT_SUBMODULES)")
  49 endif
  50 endif
  51
  52 export NINJA=./ninjatool
  53
  54 # Running meson regenerates both build.ninja and ninjatool, and that is
  55 # enough to prime the rest of the build.
  56 ninjatool: build.ninja
  57
  58 # Only needed in case Makefile.ninja does not exist.
  59 .PHONY: ninja-clean ninja-distclean clean-ctlist
  60 clean-ctlist:
  61 ninja-clean::
  62 ninja-distclean::
  63 build.ninja: config-host.mak
  64
  65 Makefile.ninja: build.ninja ninjatool
  66         ./ninjatool -t ninja2make --omit clean dist uninstall < $< > $@
  67 -include Makefile.ninja
  68
  69 ${ninja-targets-c_COMPILER} ${ninja-targets-cpp_COMPILER}: .var.command += -MP
  70
  71 # If MESON is empty, the rule will be re-evaluated after Makefiles are
  72 # reread (and MESON won't be empty anymore).
  73 ifneq ($(MESON),)
  74 Makefile.mtest: build.ninja scripts/mtest2make.py
  75         $(MESON) introspect --tests | $(PYTHON) scripts/mtest2make.py > $@
  76 -include Makefile.mtest
  77 endif
  78
  79 .git-submodule-status: git-submodule-update config-host.mak
  80
  81 # Check that we're not trying to do an out-of-tree build from
  82 # a tree that's been used for an in-tree build.
  83 ifneq ($(realpath $(SRC_PATH)),$(realpath .))
  84 ifneq ($(wildcard $(SRC_PATH)/config-host.mak),)
  85 $(error This is an out of tree build but your source tree ($(SRC_PATH)) \
  86 seems to have been used for an in-tree build. You can fix this by running \
  87 "$(MAKE) distclean && rm -rf *-linux-user *-softmmu" in your source tree)
  88 endif
  89 endif
  90
  91 CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y)
  92 CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y)
  93 CONFIG_XEN := $(CONFIG_XEN_BACKEND)
  94 CONFIG_ALL=y
  95 -include config-all-devices.mak
  96 -include config-all-disas.mak
  97
  98 config-host.mak: $(SRC_PATH)/configure $(SRC_PATH)/pc-bios $(SRC_PATH)/VERSION
  99         @echo $@ is out-of-date, running configure
 100         @if test -f meson-private/coredata.dat; then \
 101           ./config.status --skip-meson; \
 102         else \
 103           ./config.status; \
 104         fi
 105
 106 # Force configure to re-run if the API symbols are updated
 107 ifeq ($(CONFIG_PLUGIN),y)
 108 config-host.mak: $(SRC_PATH)/plugins/qemu-plugins.symbols
 109 endif
 110
 111 else
 112 config-host.mak:
 113 ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
 114         @echo "Please call configure before running make!"
 115         @exit 1
 116 endif
 117 endif
 118
 119 include $(SRC_PATH)/rules.mak
 120
 121 # lor is defined in rules.mak
 122 CONFIG_BLOCK := $(call lor,$(CONFIG_SOFTMMU),$(CONFIG_TOOLS))
 123
 124 # Create QEMU_PKGVERSION and FULL_VERSION strings
 125 # If PKGVERSION is set, use that; otherwise get version and -dirty status from git
 126 QEMU_PKGVERSION := $(if $(PKGVERSION),$(PKGVERSION),$(shell \
 127   cd $(SRC_PATH); \
 128   if test -e .git; then \
 129     git describe --match 'v*' 2>/dev/null | tr -d '\n'; \
 130     if ! git diff-index --quiet HEAD &>/dev/null; then \
 131       echo "-dirty"; \
 132     fi; \
 133   fi))
 134
 135 # Either "version (pkgversion)", or just "version" if pkgversion not set
 136 FULL_VERSION := $(if $(QEMU_PKGVERSION),$(VERSION) ($(QEMU_PKGVERSION)),$(VERSION))
 137
 138 generated-files-y = qemu-version.h config-host.h qemu-options.def
 139
 140 generated-files-y += module_block.h
 141
 142 generated-files-y += .git-submodule-status
 143
 144 edk2-decompressed = $(basename $(wildcard pc-bios/edk2-*.fd.bz2))
 145 pc-bios/edk2-%.fd: pc-bios/edk2-%.fd.bz2
 146         $(call quiet-command,bzip2 -d -c $< > $@,"BUNZIP2",$<)
 147
 148 # Don't try to regenerate Makefile or configure
 149 # We don't generate any of them
 150 Makefile: ;
 151 configure: ;
 152
 153 .PHONY: all clean cscope distclean html info install install-doc \
 154         pdf txt recurse-all dist msi FORCE
 155
 156 $(call set-vpath, $(SRC_PATH))
 157
 158 LIBS+=-lz $(LIBS_TOOLS)
 159
 160 HELPERS-y = $(HELPERS)
 161
 162 # Sphinx does not allow building manuals into the same directory as
 163 # the source files, so if we're doing an in-tree QEMU build we must
 164 # build the manuals into a subdirectory (and then install them from
 165 # there for 'make install'). For an out-of-tree build we can just
 166 # use the docs/ subdirectory in the build tree as normal.
 167 ifeq ($(realpath $(SRC_PATH)),$(realpath .))
 168 MANUAL_BUILDDIR := docs/built
 169 else
 170 MANUAL_BUILDDIR := docs
 171 endif
 172
 173 ifdef BUILD_DOCS
 174 DOCS+=$(MANUAL_BUILDDIR)/system/qemu.1
 175 DOCS+=$(MANUAL_BUILDDIR)/tools/qemu-img.1
 176 DOCS+=$(MANUAL_BUILDDIR)/tools/qemu-nbd.8
 177 DOCS+=$(MANUAL_BUILDDIR)/interop/qemu-ga.8
 178 ifeq ($(CONFIG_LINUX)$(CONFIG_SECCOMP)$(CONFIG_LIBCAP_NG),yyy)
 179 DOCS+=$(MANUAL_BUILDDIR)/tools/virtiofsd.1
 180 endif
 181 DOCS+=$(MANUAL_BUILDDIR)/system/qemu-block-drivers.7
 182 DOCS+=docs/interop/qemu-qmp-ref.html docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7
 183 DOCS+=docs/interop/qemu-ga-ref.html docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7
 184 DOCS+=$(MANUAL_BUILDDIR)/system/qemu-cpu-models.7
 185 DOCS+=$(MANUAL_BUILDDIR)/index.html
 186 ifdef CONFIG_VIRTFS
 187 DOCS+=$(MANUAL_BUILDDIR)/tools/virtfs-proxy-helper.1
 188 endif
 189 ifdef CONFIG_TRACE_SYSTEMTAP
 190 DOCS+=$(MANUAL_BUILDDIR)/tools/qemu-trace-stap.1
 191 endif
 192 else
 193 DOCS=
 194 endif
 195
 196 SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory --quiet) BUILD_DIR=$(BUILD_DIR)
 197 SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(filter %-softmmu, $(TARGET_DIRS)))
 198 SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %.d, $(SUBDIR_DEVICES_MAK))
 199
 200 ifeq ($(SUBDIR_DEVICES_MAK),)
 201 config-all-devices.mak: config-host.mak
 202         $(call quiet-command,echo '# no devices' > $@,"GEN","$@")
 203 else
 204 config-all-devices.mak: $(SUBDIR_DEVICES_MAK) config-host.mak
 205         $(call quiet-command, sed -n \
 206              's|^\([^=]*\)=\(.*\)$$|\1:=$$(findstring y,$$(\1)\2)|p' \
 207              $(SUBDIR_DEVICES_MAK) | sort -u > $@, \
 208              "GEN","$@")
 209 endif
 210
 211 -include $(SUBDIR_DEVICES_MAK_DEP)
 212
 213 # This has to be kept in sync with Kconfig.host.
 214 MINIKCONF_ARGS = \
 215     $(CONFIG_MINIKCONF_MODE) \
 216     $@ $*/config-devices.mak.d $< $(SRC_PATH)/Kconfig \
 217     CONFIG_TCG=$(CONFIG_TCG) \
 218     CONFIG_KVM=$(CONFIG_KVM) \
 219     CONFIG_SPICE=$(CONFIG_SPICE) \
 220     CONFIG_IVSHMEM=$(CONFIG_IVSHMEM) \
 221     CONFIG_TPM=$(CONFIG_TPM) \
 222     CONFIG_XEN=$(CONFIG_XEN) \
 223     CONFIG_OPENGL=$(CONFIG_OPENGL) \
 224     CONFIG_X11=$(CONFIG_X11) \
 225     CONFIG_VHOST_USER=$(CONFIG_VHOST_USER) \
 226     CONFIG_VHOST_KERNEL=$(CONFIG_VHOST_KERNEL) \
 227     CONFIG_VIRTFS=$(CONFIG_VIRTFS) \
 228     CONFIG_LINUX=$(CONFIG_LINUX) \
 229     CONFIG_PVRDMA=$(CONFIG_PVRDMA)
 230
 231 MINIKCONF = $(PYTHON) $(SRC_PATH)/scripts/minikconf.py
 232
 233 $(SUBDIR_DEVICES_MAK): %/config-devices.mak: default-configs/%.mak $(SRC_PATH)/Kconfig $(BUILD_DIR)/config-host.mak
 234         $(call quiet-command, $(MINIKCONF) $(MINIKCONF_ARGS) \
 235                 > $@.tmp, "GEN", "$@.tmp")
 236         $(call quiet-command, if test -f $@; then \
 237           if cmp -s $@.old $@; then \
 238             mv $@.tmp $@; \
 239             cp -p $@ $@.old; \
 240           else \
 241             if test -f $@.old; then \
 242               echo "WARNING: $@ (user modified) out of date.";\
 243             else \
 244               echo "WARNING: $@ out of date.";\
 245             fi; \
 246             echo "Run \"$(MAKE) defconfig\" to regenerate."; \
 247             rm $@.tmp; \
 248           fi; \
 249          else \
 250           mv $@.tmp $@; \
 251           cp -p $@ $@.old; \
 252          fi,"GEN","$@");
 253
 254 defconfig:
 255         rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
 256
 257 ifneq ($(wildcard config-host.mak),)
 258 include $(SRC_PATH)/Makefile.objs
 259 endif
 260
 261 dummy := $(call unnest-vars,, \
 262                 authz-obj-y \
 263                 chardev-obj-y \
 264                 block-obj-y \
 265                 block-obj-m \
 266                 storage-daemon-obj-y \
 267                 storage-daemon-obj-m \
 268                 crypto-obj-y \
 269                 qom-obj-y \
 270                 io-obj-y \
 271                 common-obj-y \
 272                 common-obj-m)
 273
 274 include $(SRC_PATH)/tests/Makefile.include
 275
 276 all: $(DOCS) $(if $(BUILD_DOCS),sphinxdocs) $(TOOLS) $(HELPERS-y) recurse-all modules
 277
 278 qemu-version.h: FORCE
 279         $(call quiet-command, \
 280                 (printf '#define QEMU_PKGVERSION "$(QEMU_PKGVERSION)"\n'; \
 281                 printf '#define QEMU_FULL_VERSION "$(FULL_VERSION)"\n'; \
 282                 ) > $@.tmp)
 283         $(call quiet-command, if ! cmp -s $@ $@.tmp; then \
 284           mv $@.tmp $@; \
 285          else \
 286           rm $@.tmp; \
 287          fi)
 288
 289 config-host.h: config-host.h-timestamp
 290 config-host.h-timestamp: config-host.mak
 291 qemu-options.def: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
 292         $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$@")
 293
 294 TARGET_DIRS_RULES := $(foreach t, all fuzz clean install, $(addsuffix /$(t), $(TARGET_DIRS)))
 295
 296 SOFTMMU_ALL_RULES=$(filter %-softmmu/all, $(TARGET_DIRS_RULES))
 297 $(SOFTMMU_ALL_RULES): $(authz-obj-y)
 298 $(SOFTMMU_ALL_RULES): $(block-obj-y)
 299 $(SOFTMMU_ALL_RULES): $(storage-daemon-obj-y)
 300 $(SOFTMMU_ALL_RULES): $(chardev-obj-y)
 301 $(SOFTMMU_ALL_RULES): $(crypto-obj-y)
 302 $(SOFTMMU_ALL_RULES): $(io-obj-y)
 303 $(SOFTMMU_ALL_RULES): config-all-devices.mak
 304 ifdef DECOMPRESS_EDK2_BLOBS
 305 $(SOFTMMU_ALL_RULES): $(edk2-decompressed)
 306 endif
 307
 308 SOFTMMU_FUZZ_RULES=$(filter %-softmmu/fuzz, $(TARGET_DIRS_RULES))
 309 $(SOFTMMU_FUZZ_RULES): $(authz-obj-y)
 310 $(SOFTMMU_FUZZ_RULES): $(block-obj-y)
 311 $(SOFTMMU_FUZZ_RULES): $(chardev-obj-y)
 312 $(SOFTMMU_FUZZ_RULES): $(crypto-obj-y)
 313 $(SOFTMMU_FUZZ_RULES): $(io-obj-y)
 314 $(SOFTMMU_FUZZ_RULES): config-all-devices.mak
 315 $(SOFTMMU_FUZZ_RULES): $(edk2-decompressed)
 316
 317 .PHONY: $(TARGET_DIRS_RULES)
 318 # The $(TARGET_DIRS_RULES) are of the form SUBDIR/GOAL, so that
 319 # $(dir $@) yields the sub-directory, and $(notdir $@) yields the sub-goal
 320 $(TARGET_DIRS_RULES):
 321         $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" TARGET_DIR="$(dir $@)" $(notdir $@),)
 322
 323 # LIBFDT_lib="": avoid breaking existing trees with objects requiring -fPIC
 324 DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_lib=""
 325 DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS)
 326 DTC_CPPFLAGS=-I$(SRC_PATH)/dtc/libfdt
 327
 328 .PHONY: dtc/all
 329 dtc/all: .git-submodule-status dtc/libfdt
 330         $(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt,)
 331
 332 dtc/%: .git-submodule-status
 333         @mkdir -p $@
 334
 335 # Overriding CFLAGS causes us to lose defines added in the sub-makefile.
 336 # Not overriding CFLAGS leads to mis-matches between compilation modes.
 337 # Therefore we replicate some of the logic in the sub-makefile.
 338 # Remove all the extra -Warning flags that QEMU uses that Capstone doesn't;
 339 # no need to annoy QEMU developers with such things.
 340 CAP_CFLAGS = $(patsubst -W%,,$(CFLAGS) $(QEMU_CFLAGS))
 341 CAP_CFLAGS += -DCAPSTONE_USE_SYS_DYN_MEM
 342 CAP_CFLAGS += -DCAPSTONE_HAS_ARM
 343 CAP_CFLAGS += -DCAPSTONE_HAS_ARM64
 344 CAP_CFLAGS += -DCAPSTONE_HAS_POWERPC
 345 CAP_CFLAGS += -DCAPSTONE_HAS_X86
 346
 347 .PHONY: capstone/all
 348 capstone/all: .git-submodule-status
 349         $(call quiet-command,$(MAKE) -C $(SRC_PATH)/capstone CAPSTONE_SHARED=no BUILDDIR="$(BUILD_DIR)/capstone" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(CAP_CFLAGS)" $(SUBDIR_MAKEFLAGS) $(BUILD_DIR)/capstone/$(LIBCAPSTONE))
 350
 351 .PHONY: slirp/all
 352 slirp/all: .git-submodule-status
 353         $(call quiet-command,$(MAKE) -C $(SRC_PATH)/slirp               \
 354                 BUILD_DIR="$(BUILD_DIR)/slirp"                  \
 355                 PKG_CONFIG="$(PKG_CONFIG)"                              \
 356                 CC="$(CC)" AR="$(AR)"   LD="$(LD)" RANLIB="$(RANLIB)"   \
 357                 CFLAGS="$(QEMU_CFLAGS) $(CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)")
 358
 359 $(filter %/all, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \
 360         $(qom-obj-y)
 361
 362 $(filter %/fuzz, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \
 363         $(qom-obj-y) $(crypto-user-obj-$(CONFIG_USER_ONLY))
 364
 365 ROM_DIRS = $(addprefix pc-bios/, $(ROMS))
 366 ROM_DIRS_RULES=$(foreach t, all clean, $(addsuffix /$(t), $(ROM_DIRS)))
 367 # Only keep -O and -g cflags
 368 .PHONY: $(ROM_DIRS_RULES)
 369 $(ROM_DIRS_RULES):
 370         $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" TARGET_DIR="$(dir $@)" CFLAGS="$(filter -O% -g%,$(CFLAGS))" $(notdir $@),)
 371
 372 .PHONY: recurse-all recurse-clean recurse-install
 373 recurse-all: $(addsuffix /all, $(TARGET_DIRS) $(ROM_DIRS))
 374 recurse-clean: $(addsuffix /clean, $(TARGET_DIRS) $(ROM_DIRS))
 375 recurse-install: $(addsuffix /install, $(TARGET_DIRS))
 376 $(addsuffix /install, $(TARGET_DIRS)): all
 377
 378 $(BUILD_DIR)/version.o: $(SRC_PATH)/version.rc config-host.h
 379         $(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"RC","version.o")
 380
 381 Makefile: $(version-obj-y)
 382
 383 ######################################################################
 384
 385 COMMON_LDADDS = libqemuutil.a
 386
 387 qemu-img.o: qemu-img-cmds.h
 388
 389 qemu-img$(EXESUF): qemu-img.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 390 qemu-nbd$(EXESUF): qemu-nbd.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 391 qemu-io$(EXESUF): qemu-io.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 392 qemu-storage-daemon$(EXESUF): qemu-storage-daemon.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(chardev-obj-y) $(io-obj-y) $(qom-obj-y) $(storage-daemon-obj-y) $(COMMON_LDADDS)
 393
 394 scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(authz-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 395 ifdef CONFIG_MPATH
 396 scsi/qemu-pr-helper$(EXESUF): LIBS += -ludev -lmultipath -lmpathpersist
 397 endif
 398
 399 qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/scripts/hxtool
 400         $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$@")
 401
 402 module_block.h: $(SRC_PATH)/scripts/modules/module_block.py config-host.mak
 403         $(call quiet-command,$(PYTHON) $< $@ \
 404         $(addprefix $(SRC_PATH)/,$(patsubst %.mo,%.c,$(block-obj-m))), \
 405         "GEN","$@")
 406
 407 clean: recurse-clean ninja-clean clean-ctlist
 408         -test -f ninjatool && ./ninjatool $(if $(V),-v,) -t clean
 409 # avoid old build problems by removing potentially incorrect old files
 410         rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
 411         rm -f qemu-options.def
 412         find . \( -name '*.so' -o -name '*.dll' -o -name '*.mo' -o -name '*.[oda]' \) -type f \
 413                 ! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-aarch64.a \
 414                 ! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-arm.a \
 415                 ! -path ./roms/edk2/BaseTools/Source/Python/UPT/Dll/sqlite3.dll \
 416                 -exec rm {} +
 417         rm -f $(edk2-decompressed)
 418         rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) TAGS cscope.* *.pod *~ */*~
 419         rm -f fsdev/*.pod scsi/*.pod
 420         rm -f qemu-img-cmds.h
 421         rm -f ui/shader/*-vert.h ui/shader/*-frag.h
 422         rm -f $(foreach f,$(generated-files-y),$(f) $(f)-timestamp)
 423         rm -f config-all-devices.mak
 424         rm -f $(SUBDIR_DEVICES_MAK)
 425
 426 VERSION ?= $(shell cat VERSION)
 427
 428 dist: qemu-$(VERSION).tar.bz2
 429
 430 qemu-%.tar.bz2:
 431         $(SRC_PATH)/scripts/make-release "$(SRC_PATH)" "$(patsubst qemu-%.tar.bz2,%,$@)"
 432
 433 define clean-manual =
 434 rm -rf $(MANUAL_BUILDDIR)/$1/_static
 435 rm -f $(MANUAL_BUILDDIR)/$1/objects.inv $(MANUAL_BUILDDIR)/$1/searchindex.js $(MANUAL_BUILDDIR)/$1/*.html
 436 endef
 437
 438 distclean: clean ninja-distclean
 439         -test -f ninjatool && ./ninjatool $(if $(V),-v,) -t clean -g
 440         rm -f config-host.mak config-host.h* $(DOCS)
 441         rm -f tests/tcg/config-*.mak
 442         rm -f config-all-devices.mak config-all-disas.mak config.status
 443         rm -f $(SUBDIR_DEVICES_MAK)
 444         rm -f po/*.mo tests/qemu-iotests/common.env
 445         rm -f roms/seabios/config.mak roms/vgabios/config.mak
 446         rm -f qemu-plugins-ld.symbols qemu-plugins-ld64.symbols
 447         rm -rf meson-private meson-logs meson-info compile_commands.json
 448         rm -f Makefile.ninja ninjatool ninjatool.stamp Makefile.mtest
 449         rm -f config.log
 450         rm -f linux-headers/asm
 451         rm -f docs/version.texi
 452         rm -f docs/interop/qemu-ga-qapi.texi docs/interop/qemu-qmp-qapi.texi
 453         rm -f docs/interop/qemu-qmp-ref.7 docs/interop/qemu-ga-ref.7
 454         rm -f docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt
 455         rm -f docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf
 456         rm -f docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html
 457         rm -rf .doctrees
 458         $(call clean-manual,devel)
 459         $(call clean-manual,interop)
 460         $(call clean-manual,specs)
 461         $(call clean-manual,system)
 462         $(call clean-manual,tools)
 463         $(call clean-manual,user)
 464         for d in $(TARGET_DIRS); do \
 465         rm -rf $$d || exit 1 ; \
 466         done
 467         rm -Rf .sdk
 468
 469 KEYMAPS=da     en-gb  et  fr     fr-ch  is  lt  no  pt-br  sv \
 470 ar      de     en-us  fi  fr-be  hr     it  lv  nl         pl  ru     th \
 471 de-ch  es     fo  fr-ca  hu     ja  mk  pt  sl     tr \
 472 bepo    cz
 473
 474 ifdef INSTALL_BLOBS
 475 BLOBS=bios.bin bios-256k.bin bios-microvm.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \
 476 vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin vgabios-virtio.bin \
 477 vgabios-ramfb.bin vgabios-bochs-display.bin vgabios-ati.bin \
 478 openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin QEMU,cgthree.bin \
 479 pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \
 480 pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \
 481 efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
 482 efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
 483 efi-e1000e.rom efi-vmxnet3.rom \
 484 qemu-nsis.bmp \
 485 bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
 486 multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin pvh.bin \
 487 s390-ccw.img s390-netboot.img \
 488 slof.bin skiboot.lid \
 489 palcode-clipper \
 490 u-boot.e500 u-boot-sam460-20100605.bin \
 491 qemu_vga.ndrv \
 492 edk2-licenses.txt \
 493 hppa-firmware.img \
 494 opensbi-riscv32-sifive_u-fw_jump.bin opensbi-riscv32-virt-fw_jump.bin \
 495 opensbi-riscv64-sifive_u-fw_jump.bin opensbi-riscv64-virt-fw_jump.bin
 496
 497
 498 DESCS=50-edk2-i386-secure.json 50-edk2-x86_64-secure.json \
 499 60-edk2-aarch64.json 60-edk2-arm.json 60-edk2-i386.json 60-edk2-x86_64.json
 500 else
 501 BLOBS=
 502 DESCS=
 503 endif
 504
 505 # Note that we manually filter-out the non-Sphinx documentation which
 506 # is currently built into the docs/interop directory in the build tree,
 507 # and also any sphinx-built manpages.
 508 define install-manual =
 509 for d in $$(cd $(MANUAL_BUILDDIR) && find $1 -type d); do $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/$$d"; done
 510 for f in $$(cd $(MANUAL_BUILDDIR) && find $1 -type f -a '!' '(' -name '*.[0-9]' -o -name 'qemu-*-qapi.*' -o -name 'qemu-*-ref.*' ')' ); do $(INSTALL_DATA) "$(MANUAL_BUILDDIR)/$$f" "$(DESTDIR)$(qemu_docdir)/$$f"; done
 511 endef
 512
 513 # Note that we deliberately do not install the "devel" manual: it is
 514 # for QEMU developers, and not interesting to our users.
 515 .PHONY: install-sphinxdocs
 516 install-sphinxdocs: sphinxdocs
 517         $(call install-manual,interop)
 518         $(call install-manual,specs)
 519         $(call install-manual,system)
 520         $(call install-manual,tools)
 521         $(call install-manual,user)
 522
 523 install-doc: $(DOCS) install-sphinxdocs
 524         $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)"
 525         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/index.html "$(DESTDIR)$(qemu_docdir)"
 526         $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/interop"
 527         $(INSTALL_DATA) docs/interop/qemu-qmp-ref.html "$(DESTDIR)$(qemu_docdir)/interop"
 528         $(INSTALL_DATA) docs/interop/qemu-qmp-ref.txt "$(DESTDIR)$(qemu_docdir)/interop"
 529 ifdef CONFIG_POSIX
 530         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
 531         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/system/qemu.1 "$(DESTDIR)$(mandir)/man1"
 532         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man7"
 533         $(INSTALL_DATA) docs/interop/qemu-qmp-ref.7 "$(DESTDIR)$(mandir)/man7"
 534         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/system/qemu-block-drivers.7 "$(DESTDIR)$(mandir)/man7"
 535         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/system/qemu-cpu-models.7 "$(DESTDIR)$(mandir)/man7"
 536 ifeq ($(CONFIG_TOOLS),y)
 537         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/qemu-img.1 "$(DESTDIR)$(mandir)/man1"
 538         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
 539         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
 540 endif
 541 ifdef CONFIG_TRACE_SYSTEMTAP
 542         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/qemu-trace-stap.1 "$(DESTDIR)$(mandir)/man1"
 543 endif
 544 ifeq ($(CONFIG_GUEST_AGENT),y)
 545         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/interop/qemu-ga.8 "$(DESTDIR)$(mandir)/man8"
 546         $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/interop"
 547         $(INSTALL_DATA) docs/interop/qemu-ga-ref.html "$(DESTDIR)$(qemu_docdir)/interop"
 548         $(INSTALL_DATA) docs/interop/qemu-ga-ref.txt "$(DESTDIR)$(qemu_docdir)/interop"
 549         $(INSTALL_DATA) docs/interop/qemu-ga-ref.7 "$(DESTDIR)$(mandir)/man7"
 550 endif
 551 endif
 552 ifdef CONFIG_VIRTFS
 553         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
 554         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/virtfs-proxy-helper.1 "$(DESTDIR)$(mandir)/man1"
 555 endif
 556 ifeq ($(CONFIG_LINUX)$(CONFIG_SECCOMP)$(CONFIG_LIBCAP_NG),yyy)
 557         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/virtiofsd.1 "$(DESTDIR)$(mandir)/man1"
 558 endif
 559
 560 install-datadir:
 561         $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)"
 562
 563 install-localstatedir:
 564 ifdef CONFIG_POSIX
 565 ifeq ($(CONFIG_GUEST_AGENT),y)
 566         $(INSTALL_DIR) "$(DESTDIR)$(qemu_localstatedir)"/run
 567 endif
 568 endif
 569
 570 ICON_SIZES=16x16 24x24 32x32 48x48 64x64 128x128 256x256 512x512
 571
 572 install-includedir:
 573         $(INSTALL_DIR) "$(DESTDIR)$(includedir)"
 574
 575 # Needed by "meson install"
 576 export DESTDIR
 577 install: all $(if $(BUILD_DOCS),install-doc) \
 578         install-datadir install-localstatedir install-includedir \
 579         $(if $(INSTALL_BLOBS),$(edk2-decompressed)) \
 580         recurse-install
 581 ifneq ($(TOOLS),)
 582         $(call install-prog,$(TOOLS),$(DESTDIR)$(bindir))
 583 endif
 584 ifneq ($(CONFIG_MODULES),)
 585         $(INSTALL_DIR) "$(DESTDIR)$(qemu_moddir)"
 586         for s in $(modules-m:.mo=$(DSOSUF)); do \
 587                 t="$(DESTDIR)$(qemu_moddir)/$$(echo $$s | tr / -)"; \
 588                 $(INSTALL_LIB) $$s "$$t"; \
 589                 test -z "$(STRIP)" || $(STRIP) "$$t"; \
 590         done
 591 endif
 592 ifneq ($(HELPERS-y),)
 593         $(call install-prog,$(HELPERS-y),$(DESTDIR)$(libexecdir))
 594 endif
 595 ifdef CONFIG_TRACE_SYSTEMTAP
 596         $(INSTALL_PROG) "scripts/qemu-trace-stap" $(DESTDIR)$(bindir)
 597 endif
 598 ifneq ($(BLOBS),)
 599         set -e; for x in $(BLOBS); do \
 600                 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(qemu_datadir)"; \
 601         done
 602 endif
 603 ifdef INSTALL_BLOBS
 604         set -e; for x in $(edk2-decompressed); do \
 605                 $(INSTALL_DATA) $$x "$(DESTDIR)$(qemu_datadir)"; \
 606         done
 607 endif
 608 ifneq ($(DESCS),)
 609         $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/firmware"
 610         set -e; tmpf=$$(mktemp); trap 'rm -f -- "$$tmpf"' EXIT; \
 611         for x in $(DESCS); do \
 612                 sed -e 's,@DATADIR@,$(qemu_datadir),' \
 613                         "$(SRC_PATH)/pc-bios/descriptors/$$x" > "$$tmpf"; \
 614                 $(INSTALL_DATA) "$$tmpf" \
 615                         "$(DESTDIR)$(qemu_datadir)/firmware/$$x"; \
 616         done
 617 endif
 618         for s in $(ICON_SIZES); do \
 619                 mkdir -p "$(DESTDIR)$(qemu_icondir)/hicolor/$${s}/apps"; \
 620                 $(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu_$${s}.png \
 621                         "$(DESTDIR)$(qemu_icondir)/hicolor/$${s}/apps/qemu.png"; \
 622         done; \
 623         mkdir -p "$(DESTDIR)$(qemu_icondir)/hicolor/32x32/apps"; \
 624         $(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu_32x32.bmp \
 625                 "$(DESTDIR)$(qemu_icondir)/hicolor/32x32/apps/qemu.bmp"; \
 626         mkdir -p "$(DESTDIR)$(qemu_icondir)/hicolor/scalable/apps"; \
 627         $(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu.svg \
 628                 "$(DESTDIR)$(qemu_icondir)/hicolor/scalable/apps/qemu.svg"
 629         mkdir -p "$(DESTDIR)$(qemu_desktopdir)"
 630         $(INSTALL_DATA) $(SRC_PATH)/ui/qemu.desktop \
 631                 "$(DESTDIR)$(qemu_desktopdir)/qemu.desktop"
 632 ifdef CONFIG_GTK
 633         $(MAKE) -C po $@
 634 endif
 635 ifeq ($(CONFIG_PLUGIN),y)
 636         $(INSTALL_DATA) $(SRC_PATH)/include/qemu/qemu-plugin.h "$(DESTDIR)$(includedir)/qemu-plugin.h"
 637 endif
 638         $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/keymaps"
 639         set -e; for x in $(KEYMAPS); do \
 640                 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(qemu_datadir)/keymaps"; \
 641         done
 642         for d in $(TARGET_DIRS); do \
 643         $(MAKE) $(SUBDIR_MAKEFLAGS) TARGET_DIR=$$d/ -C $$d $@ || exit 1 ; \
 644         done
 645
 646 # opengl shader programs
 647 ui/shader/%-vert.h: $(SRC_PATH)/ui/shader/%.vert $(SRC_PATH)/scripts/shaderinclude.pl
 648         @mkdir -p $(dir $@)
 649         $(call quiet-command,\
 650                 perl $(SRC_PATH)/scripts/shaderinclude.pl $< > $@,\
 651                 "VERT","$@")
 652
 653 ui/shader/%-frag.h: $(SRC_PATH)/ui/shader/%.frag $(SRC_PATH)/scripts/shaderinclude.pl
 654         @mkdir -p $(dir $@)
 655         $(call quiet-command,\
 656                 perl $(SRC_PATH)/scripts/shaderinclude.pl $< > $@,\
 657                 "FRAG","$@")
 658
 659 ui/shader.o: $(SRC_PATH)/ui/shader.c \
 660         ui/shader/texture-blit-vert.h \
 661         ui/shader/texture-blit-flip-vert.h \
 662         ui/shader/texture-blit-frag.h
 663
 664 # documentation
 665 MAKEINFO=makeinfo
 666 MAKEINFOINCLUDES= -I docs -I $(<D) -I $(@D)
 667 MAKEINFOFLAGS=--no-split --number-sections $(MAKEINFOINCLUDES)
 668 TEXI2PODFLAGS=$(MAKEINFOINCLUDES) -DVERSION="$(VERSION)" -DCONFDIR="$(qemu_confdir)"
 669 TEXI2PDFFLAGS=$(if $(V),,--quiet) -I $(SRC_PATH) $(MAKEINFOINCLUDES)
 670
 671 docs/version.texi: $(SRC_PATH)/VERSION config-host.mak
 672         $(call quiet-command,(\
 673                 echo "@set VERSION $(VERSION)" && \
 674                 echo "@set CONFDIR $(qemu_confdir)" \
 675         )> $@,"GEN","$@")
 676
 677 %.html: %.texi docs/version.texi
 678         $(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --no-headers \
 679         --html $< -o $@,"GEN","$@")
 680
 681 %.info: %.texi docs/version.texi
 682         $(call quiet-command,$(MAKEINFO) $(MAKEINFOFLAGS) $< -o $@,"GEN","$@")
 683
 684 %.txt: %.texi docs/version.texi
 685         $(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --no-headers \
 686         --plaintext $< -o $@,"GEN","$@")
 687
 688 %.pdf: %.texi docs/version.texi
 689         $(call quiet-command,texi2pdf $(TEXI2PDFFLAGS) $< -o $@,"GEN","$@")
 690
 691 # Sphinx builds all its documentation at once in one invocation
 692 # and handles "don't rebuild things unless necessary" itself.
 693 # The '.doctrees' files are cached information to speed this up.
 694 .PHONY: sphinxdocs
 695 sphinxdocs: $(MANUAL_BUILDDIR)/devel/index.html \
 696             $(MANUAL_BUILDDIR)/interop/index.html \
 697             $(MANUAL_BUILDDIR)/specs/index.html \
 698             $(MANUAL_BUILDDIR)/system/index.html \
 699             $(MANUAL_BUILDDIR)/tools/index.html \
 700             $(MANUAL_BUILDDIR)/user/index.html
 701
 702 # Canned command to build a single manual
 703 # Arguments: $1 = manual name, $2 = Sphinx builder ('html' or 'man')
 704 # Note the use of different doctree for each (manual, builder) tuple;
 705 # this works around Sphinx not handling parallel invocation on
 706 # a single doctree: https://github.com/sphinx-doc/sphinx/issues/2946
 707 build-manual = $(call quiet-command,CONFDIR="$(qemu_confdir)" $(SPHINX_BUILD) $(if $(V),,-q) $(SPHINX_WERROR) -b $2 -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1-$2 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1")
 708 # We assume all RST files in the manual's directory are used in it
 709 manual-deps = $(wildcard $(SRC_PATH)/docs/$1/*.rst $(SRC_PATH)/docs/$1/*/*.rst) \
 710               $(SRC_PATH)/docs/defs.rst.inc \
 711               $(SRC_PATH)/docs/$1/conf.py $(SRC_PATH)/docs/conf.py \
 712               $(SRC_PATH)/docs/sphinx/*.py
 713 # Macro to write out the rule and dependencies for building manpages
 714 # Usage: $(call define-manpage-rule,manualname,manpage1 manpage2...[,extradeps])
 715 # 'extradeps' is optional, and specifies extra files (eg .hx files) that
 716 # the manual page depends on.
 717 define define-manpage-rule
 718 $(call atomic,$(foreach manpage,$2,$(MANUAL_BUILDDIR)/$1/$(manpage)),$(call manual-deps,$1) $3)
 719         $(call build-manual,$1,man)
 720 endef
 721
 722 $(MANUAL_BUILDDIR)/devel/index.html: $(call manual-deps,devel)
 723         $(call build-manual,devel,html)
 724
 725 $(MANUAL_BUILDDIR)/interop/index.html: $(call manual-deps,interop)
 726         $(call build-manual,interop,html)
 727
 728 $(MANUAL_BUILDDIR)/specs/index.html: $(call manual-deps,specs)
 729         $(call build-manual,specs,html)
 730
 731 $(MANUAL_BUILDDIR)/system/index.html: $(call manual-deps,system) $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/qemu-options.hx
 732         $(call build-manual,system,html)
 733
 734 $(MANUAL_BUILDDIR)/tools/index.html: $(call manual-deps,tools) $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/docs/qemu-option-trace.rst.inc
 735         $(call build-manual,tools,html)
 736
 737 $(MANUAL_BUILDDIR)/user/index.html: $(call manual-deps,user)
 738         $(call build-manual,user,html)
 739
 740 $(call define-manpage-rule,interop,qemu-ga.8)
 741
 742 $(call define-manpage-rule,system,qemu.1 qemu-block-drivers.7 qemu-cpu-models.7)
 743
 744 $(call define-manpage-rule,tools,\
 745        qemu-img.1 qemu-nbd.8 qemu-trace-stap.1\
 746        virtiofsd.1 virtfs-proxy-helper.1,\
 747        $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/docs/qemu-option-trace.rst.inc)
 748
 749 $(MANUAL_BUILDDIR)/index.html: $(SRC_PATH)/docs/index.html.in qemu-version.h
 750         @mkdir -p "$(MANUAL_BUILDDIR)"
 751         $(call quiet-command, sed "s|@@VERSION@@|${VERSION}|g" $< >$@, \
 752              "GEN","$@")
 753
 754 docs/interop/qemu-qmp-qapi.texi: qapi/qapi-doc.texi
 755         @cp -p $< $@
 756
 757 docs/interop/qemu-ga-qapi.texi: qga/qga-qapi-doc.texi
 758         @cp -p $< $@
 759
 760 html: docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html sphinxdocs
 761 info: docs/interop/qemu-qmp-ref.info docs/interop/qemu-ga-ref.info
 762 pdf: docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf
 763 txt: docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt
 764
 765 docs/interop/qemu-ga-ref.dvi docs/interop/qemu-ga-ref.html \
 766     docs/interop/qemu-ga-ref.info docs/interop/qemu-ga-ref.pdf \
 767     docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7: \
 768         docs/interop/qemu-ga-ref.texi docs/interop/qemu-ga-qapi.texi
 769
 770 docs/interop/qemu-qmp-ref.dvi docs/interop/qemu-qmp-ref.html \
 771     docs/interop/qemu-qmp-ref.info docs/interop/qemu-qmp-ref.pdf \
 772     docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7: \
 773         docs/interop/qemu-qmp-ref.texi docs/interop/qemu-qmp-qapi.texi
 774
 775 $(filter %.1 %.7 %.8,$(DOCS)): scripts/texi2pod.pl
 776
 777 # Reports/Analysis
 778
 779 %/coverage-report.html:
 780         @mkdir -p $*
 781         $(call quiet-command,\
 782                 gcovr -r $(SRC_PATH) \
 783                 $(foreach t, $(TARGET_DIRS), --object-directory $(BUILD_DIR)/$(t)) \
 784                  --object-directory $(BUILD_DIR) \
 785                 -p --html --html-details -o $@, \
 786                 "GEN", "coverage-report.html")
 787
 788 .PHONY: coverage-report
 789 coverage-report: $(CURDIR)/reports/coverage/coverage-report.html
 790
 791 ifdef CONFIG_WIN32
 792
 793 INSTALLER = qemu-setup-$(VERSION)$(EXESUF)
 794
 795 nsisflags = -V2 -NOCD
 796
 797 ifneq ($(wildcard $(SRC_PATH)/dll),)
 798 ifeq ($(ARCH),x86_64)
 799 # 64 bit executables
 800 DLL_PATH = $(SRC_PATH)/dll/w64
 801 nsisflags += -DW64
 802 else
 803 # 32 bit executables
 804 DLL_PATH = $(SRC_PATH)/dll/w32
 805 endif
 806 endif
 807
 808 .PHONY: installer
 809 installer: $(INSTALLER)
 810
 811 INSTDIR=/tmp/qemu-nsis
 812
 813 $(INSTALLER): $(SRC_PATH)/qemu.nsi
 814         $(MAKE) install DESTDIR=${INSTDIR}
 815 ifdef SIGNCODE
 816         (cd ${INSTDIR}/${bindir}; \
 817          for i in *.exe; do \
 818            $(SIGNCODE) $${i}; \
 819          done \
 820         )
 821 endif # SIGNCODE
 822         (cd ${INSTDIR}/${bindir}; \
 823          for i in qemu-system-*.exe; do \
 824            arch=$${i%.exe}; \
 825            arch=$${arch#qemu-system-}; \
 826            echo Section \"$$arch\" Section_$$arch; \
 827            echo SetOutPath \"\$$INSTDIR\"; \
 828            echo File \"\$${BINDIR}\\$$i\"; \
 829            echo SectionEnd; \
 830          done \
 831         ) >${INSTDIR}/${bindir}/system-emulations.nsh
 832         makensis $(nsisflags) \
 833                 $(if $(BUILD_DOCS),-DCONFIG_DOCUMENTATION="y") \
 834                 $(if $(CONFIG_GTK),-DCONFIG_GTK="y") \
 835                 -DBINDIR="${INSTDIR}/${bindir}" \
 836                 $(if $(DLL_PATH),-DDLLDIR="$(DLL_PATH)") \
 837                 -DSRCDIR="$(SRC_PATH)" \
 838                 -DOUTFILE="$(INSTALLER)" \
 839                 -DDISPLAYVERSION="$(VERSION)" \
 840                 $(SRC_PATH)/qemu.nsi
 841         rm -r ${INSTDIR}
 842 ifdef SIGNCODE
 843         $(SIGNCODE) $(INSTALLER)
 844 endif # SIGNCODE
 845 endif # CONFIG_WIN
 846
 847 # Add a dependency on the generated files, so that they are always
 848 # rebuilt before other object files
 849 ifneq ($(wildcard config-host.mak),)
 850 ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
 851 Makefile: $(generated-files-y)
 852 endif
 853 endif
 854
 855 # Include automatically generated dependency files
 856 # Dependencies in Makefile.objs files come from our recursive subdir rules
 857 -include $(wildcard *.d tests/*.d)
 858
 859 include $(SRC_PATH)/tests/docker/Makefile.include
 860 include $(SRC_PATH)/tests/vm/Makefile.include
 861
 862 print-help-run = printf "  %-30s - %s\\n" "$1" "$2"
 863 print-help = $(quiet-@)$(call print-help-run,$1,$2)
 864
 865 .PHONY: help
 866 help:
 867         @echo  'Generic targets:'
 868         $(call print-help,all,Build all)
 869 ifdef CONFIG_MODULES
 870         $(call print-help,modules,Build all modules)
 871 endif
 872         $(call print-help,dir/file.o,Build specified target only)
 873         $(call print-help,install,Install QEMU, documentation and tools)
 874         $(call print-help,ctags/TAGS,Generate tags file for editors)
 875         $(call print-help,cscope,Generate cscope index)
 876         $(call print-help,sparse,Run sparse on the QEMU source)
 877         @echo  ''
 878         @$(if $(TARGET_DIRS), \
 879                 echo 'Architecture specific targets:'; \
 880                 $(foreach t, $(TARGET_DIRS), \
 881                 $(call print-help-run,$(t)/all,Build for $(t)); \
 882                 $(if $(CONFIG_FUZZ), \
 883                         $(if $(findstring softmmu,$(t)), \
 884                                 $(call print-help-run,$(t)/fuzz,Build fuzzer for $(t)); \
 885                 ))) \
 886                 echo '')
 887         @$(if $(HELPERS-y), \
 888                 echo 'Helper targets:'; \
 889                 $(foreach t, $(HELPERS-y), \
 890                 $(call print-help-run,$(t),Build $(shell basename $(t)));) \
 891                 echo '')
 892         @$(if $(TOOLS), \
 893                 echo 'Tools targets:'; \
 894                 $(foreach t, $(TOOLS), \
 895                 $(call print-help-run,$(t),Build $(shell basename $(t)) tool);) \
 896                 echo '')
 897         @echo  'Cleaning targets:'
 898         $(call print-help,clean,Remove most generated files but keep the config)
 899         $(call print-help,distclean,Remove all generated files)
 900         $(call print-help,dist,Build a distributable tarball)
 901         @echo  ''
 902         @echo  'Test targets:'
 903         $(call print-help,check,Run all tests (check-help for details))
 904         $(call print-help,docker,Help about targets running tests inside containers)
 905         $(call print-help,vm-help,Help about targets running tests inside VM)
 906         @echo  ''
 907         @echo  'Documentation targets:'
 908         $(call print-help,html info pdf txt,Build documentation in specified format)
 909         @echo  ''
 910 ifdef CONFIG_WIN32
 911         @echo  'Windows targets:'
 912         $(call print-help,installer,Build NSIS-based installer for QEMU)
 913 ifdef QEMU_GA_MSI_ENABLED
 914         $(call print-help,msi,Build MSI-based installer for qemu-ga)
 915 endif
 916         @echo  ''
 917 endif
 918         $(call print-help,$(MAKE) [targets],(quiet build, default))
 919         $(call print-help,$(MAKE) V=1 [targets],(verbose build))