Makefile

   1 # Makefile for QEMU.
   2
   3 ifneq ($(words $(subst :, ,$(CURDIR))), 1)
   4   $(error main directory cannot contain spaces nor colons)
   5 endif
   6
   7 # Always point to the root of the build tree (needs GNU make).
   8 BUILD_DIR=$(CURDIR)
   9
  10 # Before including a proper config-host.mak, assume we are in the source tree
  11 SRC_PATH=.
  12
  13 UNCHECKED_GOALS := %clean TAGS cscope ctags dist \
  14     html info pdf txt \
  15     help check-help print-% \
  16     docker docker-% vm-help vm-test vm-build-%
  17
  18 # All following code might depend on configuration variables
  19 ifneq ($(wildcard config-host.mak),)
  20 # Put the all: rule here so that config-host.mak can contain dependencies.
  21 all:
  22 include config-host.mak
  23
  24 git-submodule-update:
  25
  26 .PHONY: git-submodule-update
  27
  28 git_module_status := $(shell \
  29   cd '$(SRC_PATH)' && \
  30   GIT="$(GIT)" ./scripts/git-submodule.sh status $(GIT_SUBMODULES); \
  31   echo $$?; \
  32 )
  33
  34 ifeq (1,$(git_module_status))
  35 ifeq (no,$(GIT_UPDATE))
  36 git-submodule-update:
  37         $(call quiet-command, \
  38             echo && \
  39             echo "GIT submodule checkout is out of date. Please run" && \
  40             echo "  scripts/git-submodule.sh update $(GIT_SUBMODULES)" && \
  41             echo "from the source directory checkout $(SRC_PATH)" && \
  42             echo && \
  43             exit 1)
  44 else
  45 git-submodule-update:
  46         $(call quiet-command, \
  47           (cd $(SRC_PATH) && GIT="$(GIT)" ./scripts/git-submodule.sh update $(GIT_SUBMODULES)), \
  48           "GIT","$(GIT_SUBMODULES)")
  49 endif
  50 endif
  51
  52 export NINJA=./ninjatool
  53
  54 # Running meson regenerates both build.ninja and ninjatool, and that is
  55 # enough to prime the rest of the build.
  56 ninjatool: build.ninja
  57
  58 # Only needed in case Makefile.ninja does not exist.
  59 .PHONY: ninja-clean ninja-distclean clean-ctlist
  60 clean-ctlist:
  61 ninja-clean::
  62 ninja-distclean::
  63 build.ninja: config-host.mak
  64
  65 Makefile.ninja: build.ninja ninjatool
  66         ./ninjatool -t ninja2make --omit clean dist uninstall < $< > $@
  67 -include Makefile.ninja
  68
  69 ${ninja-targets-c_COMPILER} ${ninja-targets-cpp_COMPILER}: .var.command += -MP
  70
  71 # If MESON is empty, the rule will be re-evaluated after Makefiles are
  72 # reread (and MESON won't be empty anymore).
  73 ifneq ($(MESON),)
  74 Makefile.mtest: build.ninja scripts/mtest2make.py
  75         $(MESON) introspect --tests | $(PYTHON) scripts/mtest2make.py > $@
  76 -include Makefile.mtest
  77 endif
  78
  79 .git-submodule-status: git-submodule-update config-host.mak
  80
  81 # Check that we're not trying to do an out-of-tree build from
  82 # a tree that's been used for an in-tree build.
  83 ifneq ($(realpath $(SRC_PATH)),$(realpath .))
  84 ifneq ($(wildcard $(SRC_PATH)/config-host.mak),)
  85 $(error This is an out of tree build but your source tree ($(SRC_PATH)) \
  86 seems to have been used for an in-tree build. You can fix this by running \
  87 "$(MAKE) distclean && rm -rf *-linux-user *-softmmu" in your source tree)
  88 endif
  89 endif
  90
  91 CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y)
  92 CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y)
  93 CONFIG_XEN := $(CONFIG_XEN_BACKEND)
  94 CONFIG_ALL=y
  95 -include config-all-devices.mak
  96 -include config-all-disas.mak
  97
  98 config-host.mak: $(SRC_PATH)/configure $(SRC_PATH)/pc-bios $(SRC_PATH)/VERSION
  99         @echo $@ is out-of-date, running configure
 100         @if test -f meson-private/coredata.dat; then \
 101           ./config.status --skip-meson; \
 102         else \
 103           ./config.status; \
 104         fi
 105
 106 # Force configure to re-run if the API symbols are updated
 107 ifeq ($(CONFIG_PLUGIN),y)
 108 config-host.mak: $(SRC_PATH)/plugins/qemu-plugins.symbols
 109 endif
 110
 111 else
 112 config-host.mak:
 113 ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
 114         @echo "Please call configure before running make!"
 115         @exit 1
 116 endif
 117 endif
 118
 119 include $(SRC_PATH)/rules.mak
 120
 121 # lor is defined in rules.mak
 122 CONFIG_BLOCK := $(call lor,$(CONFIG_SOFTMMU),$(CONFIG_TOOLS))
 123
 124 generated-files-y = config-host.h qemu-options.def
 125
 126 generated-files-y += module_block.h
 127
 128 generated-files-y += .git-submodule-status
 129
 130 edk2-decompressed = $(basename $(wildcard pc-bios/edk2-*.fd.bz2))
 131 pc-bios/edk2-%.fd: pc-bios/edk2-%.fd.bz2
 132         $(call quiet-command,bzip2 -d -c $< > $@,"BUNZIP2",$<)
 133
 134 # Don't try to regenerate Makefile or configure
 135 # We don't generate any of them
 136 Makefile: ;
 137 configure: ;
 138
 139 .PHONY: all clean cscope distclean html info install install-doc \
 140         pdf txt recurse-all dist msi FORCE
 141
 142 $(call set-vpath, $(SRC_PATH))
 143
 144 LIBS+=-lz $(LIBS_TOOLS)
 145
 146 HELPERS-y = $(HELPERS)
 147
 148 # Sphinx does not allow building manuals into the same directory as
 149 # the source files, so if we're doing an in-tree QEMU build we must
 150 # build the manuals into a subdirectory (and then install them from
 151 # there for 'make install'). For an out-of-tree build we can just
 152 # use the docs/ subdirectory in the build tree as normal.
 153 ifeq ($(realpath $(SRC_PATH)),$(realpath .))
 154 MANUAL_BUILDDIR := docs/built
 155 else
 156 MANUAL_BUILDDIR := docs
 157 endif
 158
 159 ifdef BUILD_DOCS
 160 DOCS+=$(MANUAL_BUILDDIR)/system/qemu.1
 161 DOCS+=$(MANUAL_BUILDDIR)/tools/qemu-img.1
 162 DOCS+=$(MANUAL_BUILDDIR)/tools/qemu-nbd.8
 163 DOCS+=$(MANUAL_BUILDDIR)/interop/qemu-ga.8
 164 ifeq ($(CONFIG_LINUX)$(CONFIG_SECCOMP)$(CONFIG_LIBCAP_NG),yyy)
 165 DOCS+=$(MANUAL_BUILDDIR)/tools/virtiofsd.1
 166 endif
 167 DOCS+=$(MANUAL_BUILDDIR)/system/qemu-block-drivers.7
 168 DOCS+=docs/interop/qemu-qmp-ref.html docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7
 169 DOCS+=docs/interop/qemu-ga-ref.html docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7
 170 DOCS+=$(MANUAL_BUILDDIR)/system/qemu-cpu-models.7
 171 DOCS+=$(MANUAL_BUILDDIR)/index.html
 172 ifdef CONFIG_VIRTFS
 173 DOCS+=$(MANUAL_BUILDDIR)/tools/virtfs-proxy-helper.1
 174 endif
 175 ifdef CONFIG_TRACE_SYSTEMTAP
 176 DOCS+=$(MANUAL_BUILDDIR)/tools/qemu-trace-stap.1
 177 endif
 178 else
 179 DOCS=
 180 endif
 181
 182 SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory --quiet) BUILD_DIR=$(BUILD_DIR)
 183 SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(filter %-softmmu, $(TARGET_DIRS)))
 184 SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %.d, $(SUBDIR_DEVICES_MAK))
 185
 186 ifeq ($(SUBDIR_DEVICES_MAK),)
 187 config-all-devices.mak: config-host.mak
 188         $(call quiet-command,echo '# no devices' > $@,"GEN","$@")
 189 else
 190 config-all-devices.mak: $(SUBDIR_DEVICES_MAK) config-host.mak
 191         $(call quiet-command, sed -n \
 192              's|^\([^=]*\)=\(.*\)$$|\1:=$$(findstring y,$$(\1)\2)|p' \
 193              $(SUBDIR_DEVICES_MAK) | sort -u > $@, \
 194              "GEN","$@")
 195 endif
 196
 197 -include $(SUBDIR_DEVICES_MAK_DEP)
 198
 199 # This has to be kept in sync with Kconfig.host.
 200 MINIKCONF_ARGS = \
 201     $(CONFIG_MINIKCONF_MODE) \
 202     $@ $*/config-devices.mak.d $< $(SRC_PATH)/Kconfig \
 203     CONFIG_TCG=$(CONFIG_TCG) \
 204     CONFIG_KVM=$(CONFIG_KVM) \
 205     CONFIG_SPICE=$(CONFIG_SPICE) \
 206     CONFIG_IVSHMEM=$(CONFIG_IVSHMEM) \
 207     CONFIG_TPM=$(CONFIG_TPM) \
 208     CONFIG_XEN=$(CONFIG_XEN) \
 209     CONFIG_OPENGL=$(CONFIG_OPENGL) \
 210     CONFIG_X11=$(CONFIG_X11) \
 211     CONFIG_VHOST_USER=$(CONFIG_VHOST_USER) \
 212     CONFIG_VHOST_KERNEL=$(CONFIG_VHOST_KERNEL) \
 213     CONFIG_VIRTFS=$(CONFIG_VIRTFS) \
 214     CONFIG_LINUX=$(CONFIG_LINUX) \
 215     CONFIG_PVRDMA=$(CONFIG_PVRDMA)
 216
 217 MINIKCONF = $(PYTHON) $(SRC_PATH)/scripts/minikconf.py
 218
 219 $(SUBDIR_DEVICES_MAK): %/config-devices.mak: default-configs/%.mak $(SRC_PATH)/Kconfig $(BUILD_DIR)/config-host.mak
 220         $(call quiet-command, $(MINIKCONF) $(MINIKCONF_ARGS) \
 221                 > $@.tmp, "GEN", "$@.tmp")
 222         $(call quiet-command, if test -f $@; then \
 223           if cmp -s $@.old $@; then \
 224             mv $@.tmp $@; \
 225             cp -p $@ $@.old; \
 226           else \
 227             if test -f $@.old; then \
 228               echo "WARNING: $@ (user modified) out of date.";\
 229             else \
 230               echo "WARNING: $@ out of date.";\
 231             fi; \
 232             echo "Run \"$(MAKE) defconfig\" to regenerate."; \
 233             rm $@.tmp; \
 234           fi; \
 235          else \
 236           mv $@.tmp $@; \
 237           cp -p $@ $@.old; \
 238          fi,"GEN","$@");
 239
 240 defconfig:
 241         rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
 242
 243 ifneq ($(wildcard config-host.mak),)
 244 include $(SRC_PATH)/Makefile.objs
 245 endif
 246
 247 dummy := $(call unnest-vars,, \
 248                 authz-obj-y \
 249                 chardev-obj-y \
 250                 block-obj-y \
 251                 block-obj-m \
 252                 storage-daemon-obj-y \
 253                 storage-daemon-obj-m \
 254                 crypto-obj-y \
 255                 qom-obj-y \
 256                 io-obj-y \
 257                 common-obj-y \
 258                 common-obj-m)
 259
 260 include $(SRC_PATH)/tests/Makefile.include
 261
 262 all: $(DOCS) $(if $(BUILD_DOCS),sphinxdocs) $(TOOLS) $(HELPERS-y) recurse-all modules
 263
 264 config-host.h: config-host.h-timestamp
 265 config-host.h-timestamp: config-host.mak
 266 qemu-options.def: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
 267         $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$@")
 268
 269 TARGET_DIRS_RULES := $(foreach t, all fuzz clean install, $(addsuffix /$(t), $(TARGET_DIRS)))
 270
 271 SOFTMMU_ALL_RULES=$(filter %-softmmu/all, $(TARGET_DIRS_RULES))
 272 $(SOFTMMU_ALL_RULES): $(authz-obj-y)
 273 $(SOFTMMU_ALL_RULES): $(block-obj-y)
 274 $(SOFTMMU_ALL_RULES): $(storage-daemon-obj-y)
 275 $(SOFTMMU_ALL_RULES): $(chardev-obj-y)
 276 $(SOFTMMU_ALL_RULES): $(crypto-obj-y)
 277 $(SOFTMMU_ALL_RULES): $(io-obj-y)
 278 $(SOFTMMU_ALL_RULES): config-all-devices.mak
 279 ifdef DECOMPRESS_EDK2_BLOBS
 280 $(SOFTMMU_ALL_RULES): $(edk2-decompressed)
 281 endif
 282
 283 SOFTMMU_FUZZ_RULES=$(filter %-softmmu/fuzz, $(TARGET_DIRS_RULES))
 284 $(SOFTMMU_FUZZ_RULES): $(authz-obj-y)
 285 $(SOFTMMU_FUZZ_RULES): $(block-obj-y)
 286 $(SOFTMMU_FUZZ_RULES): $(chardev-obj-y)
 287 $(SOFTMMU_FUZZ_RULES): $(crypto-obj-y)
 288 $(SOFTMMU_FUZZ_RULES): $(io-obj-y)
 289 $(SOFTMMU_FUZZ_RULES): config-all-devices.mak
 290 $(SOFTMMU_FUZZ_RULES): $(edk2-decompressed)
 291
 292 .PHONY: $(TARGET_DIRS_RULES)
 293 # The $(TARGET_DIRS_RULES) are of the form SUBDIR/GOAL, so that
 294 # $(dir $@) yields the sub-directory, and $(notdir $@) yields the sub-goal
 295 $(TARGET_DIRS_RULES):
 296         $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" TARGET_DIR="$(dir $@)" $(notdir $@),)
 297
 298 # LIBFDT_lib="": avoid breaking existing trees with objects requiring -fPIC
 299 DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_lib=""
 300 DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS)
 301 DTC_CPPFLAGS=-I$(SRC_PATH)/dtc/libfdt
 302
 303 .PHONY: dtc/all
 304 dtc/all: .git-submodule-status dtc/libfdt
 305         $(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt,)
 306
 307 dtc/%: .git-submodule-status
 308         @mkdir -p $@
 309
 310 # Overriding CFLAGS causes us to lose defines added in the sub-makefile.
 311 # Not overriding CFLAGS leads to mis-matches between compilation modes.
 312 # Therefore we replicate some of the logic in the sub-makefile.
 313 # Remove all the extra -Warning flags that QEMU uses that Capstone doesn't;
 314 # no need to annoy QEMU developers with such things.
 315 CAP_CFLAGS = $(patsubst -W%,,$(CFLAGS) $(QEMU_CFLAGS))
 316 CAP_CFLAGS += -DCAPSTONE_USE_SYS_DYN_MEM
 317 CAP_CFLAGS += -DCAPSTONE_HAS_ARM
 318 CAP_CFLAGS += -DCAPSTONE_HAS_ARM64
 319 CAP_CFLAGS += -DCAPSTONE_HAS_POWERPC
 320 CAP_CFLAGS += -DCAPSTONE_HAS_X86
 321
 322 .PHONY: capstone/all
 323 capstone/all: .git-submodule-status
 324         $(call quiet-command,$(MAKE) -C $(SRC_PATH)/capstone CAPSTONE_SHARED=no BUILDDIR="$(BUILD_DIR)/capstone" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(CAP_CFLAGS)" $(SUBDIR_MAKEFLAGS) $(BUILD_DIR)/capstone/$(LIBCAPSTONE))
 325
 326 .PHONY: slirp/all
 327 slirp/all: .git-submodule-status
 328         $(call quiet-command,$(MAKE) -C $(SRC_PATH)/slirp               \
 329                 BUILD_DIR="$(BUILD_DIR)/slirp"                  \
 330                 PKG_CONFIG="$(PKG_CONFIG)"                              \
 331                 CC="$(CC)" AR="$(AR)"   LD="$(LD)" RANLIB="$(RANLIB)"   \
 332                 CFLAGS="$(QEMU_CFLAGS) $(CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)")
 333
 334 $(filter %/all, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \
 335         $(qom-obj-y)
 336
 337 $(filter %/fuzz, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \
 338         $(qom-obj-y) $(crypto-user-obj-$(CONFIG_USER_ONLY))
 339
 340 ROM_DIRS = $(addprefix pc-bios/, $(ROMS))
 341 ROM_DIRS_RULES=$(foreach t, all clean, $(addsuffix /$(t), $(ROM_DIRS)))
 342 # Only keep -O and -g cflags
 343 .PHONY: $(ROM_DIRS_RULES)
 344 $(ROM_DIRS_RULES):
 345         $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" TARGET_DIR="$(dir $@)" CFLAGS="$(filter -O% -g%,$(CFLAGS))" $(notdir $@),)
 346
 347 .PHONY: recurse-all recurse-clean recurse-install
 348 recurse-all: $(addsuffix /all, $(TARGET_DIRS) $(ROM_DIRS))
 349 recurse-clean: $(addsuffix /clean, $(TARGET_DIRS) $(ROM_DIRS))
 350 recurse-install: $(addsuffix /install, $(TARGET_DIRS))
 351 $(addsuffix /install, $(TARGET_DIRS)): all
 352
 353 $(BUILD_DIR)/version.o: $(SRC_PATH)/version.rc config-host.h
 354         $(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"RC","version.o")
 355
 356 Makefile: $(version-obj-y)
 357
 358 ######################################################################
 359
 360 COMMON_LDADDS = libqemuutil.a
 361
 362 qemu-img.o: qemu-img-cmds.h
 363
 364 qemu-img$(EXESUF): qemu-img.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 365 qemu-nbd$(EXESUF): qemu-nbd.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 366 qemu-io$(EXESUF): qemu-io.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 367 qemu-storage-daemon$(EXESUF): qemu-storage-daemon.o $(authz-obj-y) $(block-obj-y) $(crypto-obj-y) $(chardev-obj-y) $(io-obj-y) $(qom-obj-y) $(storage-daemon-obj-y) $(COMMON_LDADDS)
 368
 369 scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(authz-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
 370 ifdef CONFIG_MPATH
 371 scsi/qemu-pr-helper$(EXESUF): LIBS += -ludev -lmultipath -lmpathpersist
 372 endif
 373
 374 qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/scripts/hxtool
 375         $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$@")
 376
 377 module_block.h: $(SRC_PATH)/scripts/modules/module_block.py config-host.mak
 378         $(call quiet-command,$(PYTHON) $< $@ \
 379         $(addprefix $(SRC_PATH)/,$(patsubst %.mo,%.c,$(block-obj-m))), \
 380         "GEN","$@")
 381
 382 clean: recurse-clean ninja-clean clean-ctlist
 383         -test -f ninjatool && ./ninjatool $(if $(V),-v,) -t clean
 384 # avoid old build problems by removing potentially incorrect old files
 385         rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
 386         rm -f qemu-options.def
 387         find . \( -name '*.so' -o -name '*.dll' -o -name '*.mo' -o -name '*.[oda]' \) -type f \
 388                 ! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-aarch64.a \
 389                 ! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-arm.a \
 390                 ! -path ./roms/edk2/BaseTools/Source/Python/UPT/Dll/sqlite3.dll \
 391                 -exec rm {} +
 392         rm -f $(edk2-decompressed)
 393         rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) TAGS cscope.* *.pod *~ */*~
 394         rm -f fsdev/*.pod scsi/*.pod
 395         rm -f qemu-img-cmds.h
 396         rm -f $(foreach f,$(generated-files-y),$(f) $(f)-timestamp)
 397         rm -f config-all-devices.mak
 398         rm -f $(SUBDIR_DEVICES_MAK)
 399
 400 VERSION ?= $(shell cat VERSION)
 401
 402 dist: qemu-$(VERSION).tar.bz2
 403
 404 qemu-%.tar.bz2:
 405         $(SRC_PATH)/scripts/make-release "$(SRC_PATH)" "$(patsubst qemu-%.tar.bz2,%,$@)"
 406
 407 define clean-manual =
 408 rm -rf $(MANUAL_BUILDDIR)/$1/_static
 409 rm -f $(MANUAL_BUILDDIR)/$1/objects.inv $(MANUAL_BUILDDIR)/$1/searchindex.js $(MANUAL_BUILDDIR)/$1/*.html
 410 endef
 411
 412 distclean: clean ninja-distclean
 413         -test -f ninjatool && ./ninjatool $(if $(V),-v,) -t clean -g
 414         rm -f config-host.mak config-host.h* $(DOCS)
 415         rm -f tests/tcg/config-*.mak
 416         rm -f config-all-devices.mak config-all-disas.mak config.status
 417         rm -f $(SUBDIR_DEVICES_MAK)
 418         rm -f po/*.mo tests/qemu-iotests/common.env
 419         rm -f roms/seabios/config.mak roms/vgabios/config.mak
 420         rm -f qemu-plugins-ld.symbols qemu-plugins-ld64.symbols
 421         rm -rf meson-private meson-logs meson-info compile_commands.json
 422         rm -f Makefile.ninja ninjatool ninjatool.stamp Makefile.mtest
 423         rm -f config.log
 424         rm -f linux-headers/asm
 425         rm -f docs/version.texi
 426         rm -f docs/interop/qemu-ga-qapi.texi docs/interop/qemu-qmp-qapi.texi
 427         rm -f docs/interop/qemu-qmp-ref.7 docs/interop/qemu-ga-ref.7
 428         rm -f docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt
 429         rm -f docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf
 430         rm -f docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html
 431         rm -rf .doctrees
 432         $(call clean-manual,devel)
 433         $(call clean-manual,interop)
 434         $(call clean-manual,specs)
 435         $(call clean-manual,system)
 436         $(call clean-manual,tools)
 437         $(call clean-manual,user)
 438         for d in $(TARGET_DIRS); do \
 439         rm -rf $$d || exit 1 ; \
 440         done
 441         rm -Rf .sdk
 442
 443 KEYMAPS=da     en-gb  et  fr     fr-ch  is  lt  no  pt-br  sv \
 444 ar      de     en-us  fi  fr-be  hr     it  lv  nl         pl  ru     th \
 445 de-ch  es     fo  fr-ca  hu     ja  mk  pt  sl     tr \
 446 bepo    cz
 447
 448 ifdef INSTALL_BLOBS
 449 BLOBS=bios.bin bios-256k.bin bios-microvm.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \
 450 vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin vgabios-virtio.bin \
 451 vgabios-ramfb.bin vgabios-bochs-display.bin vgabios-ati.bin \
 452 openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin QEMU,cgthree.bin \
 453 pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \
 454 pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \
 455 efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
 456 efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
 457 efi-e1000e.rom efi-vmxnet3.rom \
 458 qemu-nsis.bmp \
 459 bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
 460 multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin pvh.bin \
 461 s390-ccw.img s390-netboot.img \
 462 slof.bin skiboot.lid \
 463 palcode-clipper \
 464 u-boot.e500 u-boot-sam460-20100605.bin \
 465 qemu_vga.ndrv \
 466 edk2-licenses.txt \
 467 hppa-firmware.img \
 468 opensbi-riscv32-sifive_u-fw_jump.bin opensbi-riscv32-virt-fw_jump.bin \
 469 opensbi-riscv64-sifive_u-fw_jump.bin opensbi-riscv64-virt-fw_jump.bin
 470
 471
 472 DESCS=50-edk2-i386-secure.json 50-edk2-x86_64-secure.json \
 473 60-edk2-aarch64.json 60-edk2-arm.json 60-edk2-i386.json 60-edk2-x86_64.json
 474 else
 475 BLOBS=
 476 DESCS=
 477 endif
 478
 479 # Note that we manually filter-out the non-Sphinx documentation which
 480 # is currently built into the docs/interop directory in the build tree,
 481 # and also any sphinx-built manpages.
 482 define install-manual =
 483 for d in $$(cd $(MANUAL_BUILDDIR) && find $1 -type d); do $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/$$d"; done
 484 for f in $$(cd $(MANUAL_BUILDDIR) && find $1 -type f -a '!' '(' -name '*.[0-9]' -o -name 'qemu-*-qapi.*' -o -name 'qemu-*-ref.*' ')' ); do $(INSTALL_DATA) "$(MANUAL_BUILDDIR)/$$f" "$(DESTDIR)$(qemu_docdir)/$$f"; done
 485 endef
 486
 487 # Note that we deliberately do not install the "devel" manual: it is
 488 # for QEMU developers, and not interesting to our users.
 489 .PHONY: install-sphinxdocs
 490 install-sphinxdocs: sphinxdocs
 491         $(call install-manual,interop)
 492         $(call install-manual,specs)
 493         $(call install-manual,system)
 494         $(call install-manual,tools)
 495         $(call install-manual,user)
 496
 497 install-doc: $(DOCS) install-sphinxdocs
 498         $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)"
 499         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/index.html "$(DESTDIR)$(qemu_docdir)"
 500         $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/interop"
 501         $(INSTALL_DATA) docs/interop/qemu-qmp-ref.html "$(DESTDIR)$(qemu_docdir)/interop"
 502         $(INSTALL_DATA) docs/interop/qemu-qmp-ref.txt "$(DESTDIR)$(qemu_docdir)/interop"
 503 ifdef CONFIG_POSIX
 504         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
 505         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/system/qemu.1 "$(DESTDIR)$(mandir)/man1"
 506         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man7"
 507         $(INSTALL_DATA) docs/interop/qemu-qmp-ref.7 "$(DESTDIR)$(mandir)/man7"
 508         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/system/qemu-block-drivers.7 "$(DESTDIR)$(mandir)/man7"
 509         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/system/qemu-cpu-models.7 "$(DESTDIR)$(mandir)/man7"
 510 ifeq ($(CONFIG_TOOLS),y)
 511         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/qemu-img.1 "$(DESTDIR)$(mandir)/man1"
 512         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
 513         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
 514 endif
 515 ifdef CONFIG_TRACE_SYSTEMTAP
 516         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/qemu-trace-stap.1 "$(DESTDIR)$(mandir)/man1"
 517 endif
 518 ifeq ($(CONFIG_GUEST_AGENT),y)
 519         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/interop/qemu-ga.8 "$(DESTDIR)$(mandir)/man8"
 520         $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/interop"
 521         $(INSTALL_DATA) docs/interop/qemu-ga-ref.html "$(DESTDIR)$(qemu_docdir)/interop"
 522         $(INSTALL_DATA) docs/interop/qemu-ga-ref.txt "$(DESTDIR)$(qemu_docdir)/interop"
 523         $(INSTALL_DATA) docs/interop/qemu-ga-ref.7 "$(DESTDIR)$(mandir)/man7"
 524 endif
 525 endif
 526 ifdef CONFIG_VIRTFS
 527         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
 528         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/virtfs-proxy-helper.1 "$(DESTDIR)$(mandir)/man1"
 529 endif
 530 ifeq ($(CONFIG_LINUX)$(CONFIG_SECCOMP)$(CONFIG_LIBCAP_NG),yyy)
 531         $(INSTALL_DATA) $(MANUAL_BUILDDIR)/tools/virtiofsd.1 "$(DESTDIR)$(mandir)/man1"
 532 endif
 533
 534 install-datadir:
 535         $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)"
 536
 537 install-localstatedir:
 538 ifdef CONFIG_POSIX
 539 ifeq ($(CONFIG_GUEST_AGENT),y)
 540         $(INSTALL_DIR) "$(DESTDIR)$(qemu_localstatedir)"/run
 541 endif
 542 endif
 543
 544 ICON_SIZES=16x16 24x24 32x32 48x48 64x64 128x128 256x256 512x512
 545
 546 install-includedir:
 547         $(INSTALL_DIR) "$(DESTDIR)$(includedir)"
 548
 549 # Needed by "meson install"
 550 export DESTDIR
 551 install: all $(if $(BUILD_DOCS),install-doc) \
 552         install-datadir install-localstatedir install-includedir \
 553         $(if $(INSTALL_BLOBS),$(edk2-decompressed)) \
 554         recurse-install
 555 ifneq ($(TOOLS),)
 556         $(call install-prog,$(TOOLS),$(DESTDIR)$(bindir))
 557 endif
 558 ifneq ($(CONFIG_MODULES),)
 559         $(INSTALL_DIR) "$(DESTDIR)$(qemu_moddir)"
 560         for s in $(modules-m:.mo=$(DSOSUF)); do \
 561                 t="$(DESTDIR)$(qemu_moddir)/$$(echo $$s | tr / -)"; \
 562                 $(INSTALL_LIB) $$s "$$t"; \
 563                 test -z "$(STRIP)" || $(STRIP) "$$t"; \
 564         done
 565 endif
 566 ifneq ($(HELPERS-y),)
 567         $(call install-prog,$(HELPERS-y),$(DESTDIR)$(libexecdir))
 568 endif
 569 ifdef CONFIG_TRACE_SYSTEMTAP
 570         $(INSTALL_PROG) "scripts/qemu-trace-stap" $(DESTDIR)$(bindir)
 571 endif
 572 ifneq ($(BLOBS),)
 573         set -e; for x in $(BLOBS); do \
 574                 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(qemu_datadir)"; \
 575         done
 576 endif
 577 ifdef INSTALL_BLOBS
 578         set -e; for x in $(edk2-decompressed); do \
 579                 $(INSTALL_DATA) $$x "$(DESTDIR)$(qemu_datadir)"; \
 580         done
 581 endif
 582 ifneq ($(DESCS),)
 583         $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/firmware"
 584         set -e; tmpf=$$(mktemp); trap 'rm -f -- "$$tmpf"' EXIT; \
 585         for x in $(DESCS); do \
 586                 sed -e 's,@DATADIR@,$(qemu_datadir),' \
 587                         "$(SRC_PATH)/pc-bios/descriptors/$$x" > "$$tmpf"; \
 588                 $(INSTALL_DATA) "$$tmpf" \
 589                         "$(DESTDIR)$(qemu_datadir)/firmware/$$x"; \
 590         done
 591 endif
 592         for s in $(ICON_SIZES); do \
 593                 mkdir -p "$(DESTDIR)$(qemu_icondir)/hicolor/$${s}/apps"; \
 594                 $(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu_$${s}.png \
 595                         "$(DESTDIR)$(qemu_icondir)/hicolor/$${s}/apps/qemu.png"; \
 596         done; \
 597         mkdir -p "$(DESTDIR)$(qemu_icondir)/hicolor/32x32/apps"; \
 598         $(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu_32x32.bmp \
 599                 "$(DESTDIR)$(qemu_icondir)/hicolor/32x32/apps/qemu.bmp"; \
 600         mkdir -p "$(DESTDIR)$(qemu_icondir)/hicolor/scalable/apps"; \
 601         $(INSTALL_DATA) $(SRC_PATH)/ui/icons/qemu.svg \
 602                 "$(DESTDIR)$(qemu_icondir)/hicolor/scalable/apps/qemu.svg"
 603         mkdir -p "$(DESTDIR)$(qemu_desktopdir)"
 604         $(INSTALL_DATA) $(SRC_PATH)/ui/qemu.desktop \
 605                 "$(DESTDIR)$(qemu_desktopdir)/qemu.desktop"
 606 ifdef CONFIG_GTK
 607         $(MAKE) -C po $@
 608 endif
 609 ifeq ($(CONFIG_PLUGIN),y)
 610         $(INSTALL_DATA) $(SRC_PATH)/include/qemu/qemu-plugin.h "$(DESTDIR)$(includedir)/qemu-plugin.h"
 611 endif
 612         $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/keymaps"
 613         set -e; for x in $(KEYMAPS); do \
 614                 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(qemu_datadir)/keymaps"; \
 615         done
 616         for d in $(TARGET_DIRS); do \
 617         $(MAKE) $(SUBDIR_MAKEFLAGS) TARGET_DIR=$$d/ -C $$d $@ || exit 1 ; \
 618         done
 619
 620 # documentation
 621 MAKEINFO=makeinfo
 622 MAKEINFOINCLUDES= -I docs -I $(<D) -I $(@D)
 623 MAKEINFOFLAGS=--no-split --number-sections $(MAKEINFOINCLUDES)
 624 TEXI2PODFLAGS=$(MAKEINFOINCLUDES) -DVERSION="$(VERSION)" -DCONFDIR="$(qemu_confdir)"
 625 TEXI2PDFFLAGS=$(if $(V),,--quiet) -I $(SRC_PATH) $(MAKEINFOINCLUDES)
 626
 627 docs/version.texi: $(SRC_PATH)/VERSION config-host.mak
 628         $(call quiet-command,(\
 629                 echo "@set VERSION $(VERSION)" && \
 630                 echo "@set CONFDIR $(qemu_confdir)" \
 631         )> $@,"GEN","$@")
 632
 633 %.html: %.texi docs/version.texi
 634         $(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --no-headers \
 635         --html $< -o $@,"GEN","$@")
 636
 637 %.info: %.texi docs/version.texi
 638         $(call quiet-command,$(MAKEINFO) $(MAKEINFOFLAGS) $< -o $@,"GEN","$@")
 639
 640 %.txt: %.texi docs/version.texi
 641         $(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --no-headers \
 642         --plaintext $< -o $@,"GEN","$@")
 643
 644 %.pdf: %.texi docs/version.texi
 645         $(call quiet-command,texi2pdf $(TEXI2PDFFLAGS) $< -o $@,"GEN","$@")
 646
 647 # Sphinx builds all its documentation at once in one invocation
 648 # and handles "don't rebuild things unless necessary" itself.
 649 # The '.doctrees' files are cached information to speed this up.
 650 .PHONY: sphinxdocs
 651 sphinxdocs: $(MANUAL_BUILDDIR)/devel/index.html \
 652             $(MANUAL_BUILDDIR)/interop/index.html \
 653             $(MANUAL_BUILDDIR)/specs/index.html \
 654             $(MANUAL_BUILDDIR)/system/index.html \
 655             $(MANUAL_BUILDDIR)/tools/index.html \
 656             $(MANUAL_BUILDDIR)/user/index.html
 657
 658 # Canned command to build a single manual
 659 # Arguments: $1 = manual name, $2 = Sphinx builder ('html' or 'man')
 660 # Note the use of different doctree for each (manual, builder) tuple;
 661 # this works around Sphinx not handling parallel invocation on
 662 # a single doctree: https://github.com/sphinx-doc/sphinx/issues/2946
 663 build-manual = $(call quiet-command,CONFDIR="$(qemu_confdir)" $(SPHINX_BUILD) $(if $(V),,-q) $(SPHINX_WERROR) -b $2 -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1-$2 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1")
 664 # We assume all RST files in the manual's directory are used in it
 665 manual-deps = $(wildcard $(SRC_PATH)/docs/$1/*.rst $(SRC_PATH)/docs/$1/*/*.rst) \
 666               $(SRC_PATH)/docs/defs.rst.inc \
 667               $(SRC_PATH)/docs/$1/conf.py $(SRC_PATH)/docs/conf.py \
 668               $(SRC_PATH)/docs/sphinx/*.py
 669 # Macro to write out the rule and dependencies for building manpages
 670 # Usage: $(call define-manpage-rule,manualname,manpage1 manpage2...[,extradeps])
 671 # 'extradeps' is optional, and specifies extra files (eg .hx files) that
 672 # the manual page depends on.
 673 define define-manpage-rule
 674 $(call atomic,$(foreach manpage,$2,$(MANUAL_BUILDDIR)/$1/$(manpage)),$(call manual-deps,$1) $3)
 675         $(call build-manual,$1,man)
 676 endef
 677
 678 $(MANUAL_BUILDDIR)/devel/index.html: $(call manual-deps,devel)
 679         $(call build-manual,devel,html)
 680
 681 $(MANUAL_BUILDDIR)/interop/index.html: $(call manual-deps,interop)
 682         $(call build-manual,interop,html)
 683
 684 $(MANUAL_BUILDDIR)/specs/index.html: $(call manual-deps,specs)
 685         $(call build-manual,specs,html)
 686
 687 $(MANUAL_BUILDDIR)/system/index.html: $(call manual-deps,system) $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/qemu-options.hx
 688         $(call build-manual,system,html)
 689
 690 $(MANUAL_BUILDDIR)/tools/index.html: $(call manual-deps,tools) $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/docs/qemu-option-trace.rst.inc
 691         $(call build-manual,tools,html)
 692
 693 $(MANUAL_BUILDDIR)/user/index.html: $(call manual-deps,user)
 694         $(call build-manual,user,html)
 695
 696 $(call define-manpage-rule,interop,qemu-ga.8)
 697
 698 $(call define-manpage-rule,system,qemu.1 qemu-block-drivers.7 qemu-cpu-models.7)
 699
 700 $(call define-manpage-rule,tools,\
 701        qemu-img.1 qemu-nbd.8 qemu-trace-stap.1\
 702        virtiofsd.1 virtfs-proxy-helper.1,\
 703        $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/docs/qemu-option-trace.rst.inc)
 704
 705 $(MANUAL_BUILDDIR)/index.html: $(SRC_PATH)/docs/index.html.in qemu-version.h
 706         @mkdir -p "$(MANUAL_BUILDDIR)"
 707         $(call quiet-command, sed "s|@@VERSION@@|${VERSION}|g" $< >$@, \
 708              "GEN","$@")
 709
 710 docs/interop/qemu-qmp-qapi.texi: qapi/qapi-doc.texi
 711         @cp -p $< $@
 712
 713 docs/interop/qemu-ga-qapi.texi: qga/qga-qapi-doc.texi
 714         @cp -p $< $@
 715
 716 html: docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html sphinxdocs
 717 info: docs/interop/qemu-qmp-ref.info docs/interop/qemu-ga-ref.info
 718 pdf: docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf
 719 txt: docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt
 720
 721 docs/interop/qemu-ga-ref.dvi docs/interop/qemu-ga-ref.html \
 722     docs/interop/qemu-ga-ref.info docs/interop/qemu-ga-ref.pdf \
 723     docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7: \
 724         docs/interop/qemu-ga-ref.texi docs/interop/qemu-ga-qapi.texi
 725
 726 docs/interop/qemu-qmp-ref.dvi docs/interop/qemu-qmp-ref.html \
 727     docs/interop/qemu-qmp-ref.info docs/interop/qemu-qmp-ref.pdf \
 728     docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7: \
 729         docs/interop/qemu-qmp-ref.texi docs/interop/qemu-qmp-qapi.texi
 730
 731 $(filter %.1 %.7 %.8,$(DOCS)): scripts/texi2pod.pl
 732
 733 # Reports/Analysis
 734
 735 %/coverage-report.html:
 736         @mkdir -p $*
 737         $(call quiet-command,\
 738                 gcovr -r $(SRC_PATH) \
 739                 $(foreach t, $(TARGET_DIRS), --object-directory $(BUILD_DIR)/$(t)) \
 740                  --object-directory $(BUILD_DIR) \
 741                 -p --html --html-details -o $@, \
 742                 "GEN", "coverage-report.html")
 743
 744 .PHONY: coverage-report
 745 coverage-report: $(CURDIR)/reports/coverage/coverage-report.html
 746
 747 ifdef CONFIG_WIN32
 748
 749 INSTALLER = qemu-setup-$(VERSION)$(EXESUF)
 750
 751 nsisflags = -V2 -NOCD
 752
 753 ifneq ($(wildcard $(SRC_PATH)/dll),)
 754 ifeq ($(ARCH),x86_64)
 755 # 64 bit executables
 756 DLL_PATH = $(SRC_PATH)/dll/w64
 757 nsisflags += -DW64
 758 else
 759 # 32 bit executables
 760 DLL_PATH = $(SRC_PATH)/dll/w32
 761 endif
 762 endif
 763
 764 .PHONY: installer
 765 installer: $(INSTALLER)
 766
 767 INSTDIR=/tmp/qemu-nsis
 768
 769 $(INSTALLER): $(SRC_PATH)/qemu.nsi
 770         $(MAKE) install DESTDIR=${INSTDIR}
 771 ifdef SIGNCODE
 772         (cd ${INSTDIR}/${bindir}; \
 773          for i in *.exe; do \
 774            $(SIGNCODE) $${i}; \
 775          done \
 776         )
 777 endif # SIGNCODE
 778         (cd ${INSTDIR}/${bindir}; \
 779          for i in qemu-system-*.exe; do \
 780            arch=$${i%.exe}; \
 781            arch=$${arch#qemu-system-}; \
 782            echo Section \"$$arch\" Section_$$arch; \
 783            echo SetOutPath \"\$$INSTDIR\"; \
 784            echo File \"\$${BINDIR}\\$$i\"; \
 785            echo SectionEnd; \
 786          done \
 787         ) >${INSTDIR}/${bindir}/system-emulations.nsh
 788         makensis $(nsisflags) \
 789                 $(if $(BUILD_DOCS),-DCONFIG_DOCUMENTATION="y") \
 790                 $(if $(CONFIG_GTK),-DCONFIG_GTK="y") \
 791                 -DBINDIR="${INSTDIR}/${bindir}" \
 792                 $(if $(DLL_PATH),-DDLLDIR="$(DLL_PATH)") \
 793                 -DSRCDIR="$(SRC_PATH)" \
 794                 -DOUTFILE="$(INSTALLER)" \
 795                 -DDISPLAYVERSION="$(VERSION)" \
 796                 $(SRC_PATH)/qemu.nsi
 797         rm -r ${INSTDIR}
 798 ifdef SIGNCODE
 799         $(SIGNCODE) $(INSTALLER)
 800 endif # SIGNCODE
 801 endif # CONFIG_WIN
 802
 803 # Add a dependency on the generated files, so that they are always
 804 # rebuilt before other object files
 805 ifneq ($(wildcard config-host.mak),)
 806 ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
 807 Makefile: $(generated-files-y)
 808 endif
 809 endif
 810
 811 # Include automatically generated dependency files
 812 # Dependencies in Makefile.objs files come from our recursive subdir rules
 813 -include $(wildcard *.d tests/*.d)
 814
 815 include $(SRC_PATH)/tests/docker/Makefile.include
 816 include $(SRC_PATH)/tests/vm/Makefile.include
 817
 818 print-help-run = printf "  %-30s - %s\\n" "$1" "$2"
 819 print-help = $(quiet-@)$(call print-help-run,$1,$2)
 820
 821 .PHONY: help
 822 help:
 823         @echo  'Generic targets:'
 824         $(call print-help,all,Build all)
 825 ifdef CONFIG_MODULES
 826         $(call print-help,modules,Build all modules)
 827 endif
 828         $(call print-help,dir/file.o,Build specified target only)
 829         $(call print-help,install,Install QEMU, documentation and tools)
 830         $(call print-help,ctags/TAGS,Generate tags file for editors)
 831         $(call print-help,cscope,Generate cscope index)
 832         $(call print-help,sparse,Run sparse on the QEMU source)
 833         @echo  ''
 834         @$(if $(TARGET_DIRS), \
 835                 echo 'Architecture specific targets:'; \
 836                 $(foreach t, $(TARGET_DIRS), \
 837                 $(call print-help-run,$(t)/all,Build for $(t)); \
 838                 $(if $(CONFIG_FUZZ), \
 839                         $(if $(findstring softmmu,$(t)), \
 840                                 $(call print-help-run,$(t)/fuzz,Build fuzzer for $(t)); \
 841                 ))) \
 842                 echo '')
 843         @$(if $(HELPERS-y), \
 844                 echo 'Helper targets:'; \
 845                 $(foreach t, $(HELPERS-y), \
 846                 $(call print-help-run,$(t),Build $(shell basename $(t)));) \
 847                 echo '')
 848         @$(if $(TOOLS), \
 849                 echo 'Tools targets:'; \
 850                 $(foreach t, $(TOOLS), \
 851                 $(call print-help-run,$(t),Build $(shell basename $(t)) tool);) \
 852                 echo '')
 853         @echo  'Cleaning targets:'
 854         $(call print-help,clean,Remove most generated files but keep the config)
 855         $(call print-help,distclean,Remove all generated files)
 856         $(call print-help,dist,Build a distributable tarball)
 857         @echo  ''
 858         @echo  'Test targets:'
 859         $(call print-help,check,Run all tests (check-help for details))
 860         $(call print-help,docker,Help about targets running tests inside containers)
 861         $(call print-help,vm-help,Help about targets running tests inside VM)
 862         @echo  ''
 863         @echo  'Documentation targets:'
 864         $(call print-help,html info pdf txt,Build documentation in specified format)
 865         @echo  ''
 866 ifdef CONFIG_WIN32
 867         @echo  'Windows targets:'
 868         $(call print-help,installer,Build NSIS-based installer for QEMU)
 869 ifdef QEMU_GA_MSI_ENABLED
 870         $(call print-help,msi,Build MSI-based installer for qemu-ga)
 871 endif
 872         @echo  ''
 873 endif
 874         $(call print-help,$(MAKE) [targets],(quiet build, default))
 875         $(call print-help,$(MAKE) V=1 [targets],(verbose build))