]> git.proxmox.com Git - mirror_zfs-debian.git/blob - Makefile.in
439b17c60bb304272c745319c3ef8fbd5ccfe87b
[mirror_zfs-debian.git] / Makefile.in
1 # Makefile.in generated by automake 1.11.3 from Makefile.am.
2 # @configure_input@
3
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
6 # Foundation, Inc.
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
10
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14 # PARTICULAR PURPOSE.
15
16 @SET_MAKE@
17
18 ###############################################################################
19 # Copyright (C) 2007-2013 Lawrence Livermore National Security, LLC.
20 # Copyright (C) 2007 The Regents of the University of California.
21 # Written by Brian Behlendorf <behlendorf1@llnl.gov>.
22 ###############################################################################
23 # Build targets for RPM packages.
24 ###############################################################################
25
26 VPATH = @srcdir@
27 pkgdatadir = $(datadir)/@PACKAGE@
28 pkgincludedir = $(includedir)/@PACKAGE@
29 pkglibdir = $(libdir)/@PACKAGE@
30 pkglibexecdir = $(libexecdir)/@PACKAGE@
31 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
32 install_sh_DATA = $(install_sh) -c -m 644
33 install_sh_PROGRAM = $(install_sh) -c
34 install_sh_SCRIPT = $(install_sh) -c
35 INSTALL_HEADER = $(INSTALL_DATA)
36 transform = $(program_transform_name)
37 NORMAL_INSTALL = :
38 PRE_INSTALL = :
39 POST_INSTALL = :
40 NORMAL_UNINSTALL = :
41 PRE_UNINSTALL = :
42 POST_UNINSTALL = :
43 build_triplet = @build@
44 host_triplet = @host@
45 target_triplet = @target@
46 DIST_COMMON = $(am__configure_deps) $(am__extra_HEADERS_DIST) \
47 $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
48 $(srcdir)/config/deb.am $(srcdir)/config/rpm.am \
49 $(srcdir)/config/tgz.am $(srcdir)/zfs-script-config.sh.in \
50 $(srcdir)/zfs.release.in $(srcdir)/zfs_config.h.in \
51 $(top_srcdir)/configure $(top_srcdir)/module/Makefile.in \
52 $(top_srcdir)/module/avl/Makefile.in \
53 $(top_srcdir)/module/nvpair/Makefile.in \
54 $(top_srcdir)/module/unicode/Makefile.in \
55 $(top_srcdir)/module/zcommon/Makefile.in \
56 $(top_srcdir)/module/zfs/Makefile.in \
57 $(top_srcdir)/module/zpios/Makefile.in AUTHORS \
58 config/config.guess config/config.sub config/depcomp \
59 config/install-sh config/ltmain.sh config/missing
60 @CONFIG_USER_TRUE@am__append_1 = udev etc man scripts lib cmd contrib
61 @CONFIG_KERNEL_TRUE@am__append_2 = module
62 subdir = .
63 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
64 am__aclocal_m4_deps = $(top_srcdir)/config/always-no-bool-compare.m4 \
65 $(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
66 $(top_srcdir)/config/kernel-acl.m4 \
67 $(top_srcdir)/config/kernel-automount.m4 \
68 $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
69 $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
70 $(top_srcdir)/config/kernel-bdev-physical-size.m4 \
71 $(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
72 $(top_srcdir)/config/kernel-bio-bvec-iter.m4 \
73 $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
74 $(top_srcdir)/config/kernel-bio-failfast.m4 \
75 $(top_srcdir)/config/kernel-bio-rw-barrier.m4 \
76 $(top_srcdir)/config/kernel-bio-rw-discard.m4 \
77 $(top_srcdir)/config/kernel-blk-queue-flush.m4 \
78 $(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
79 $(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
80 $(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
81 $(top_srcdir)/config/kernel-blkdev-get.m4 \
82 $(top_srcdir)/config/kernel-block-device-operations-release-void.m4 \
83 $(top_srcdir)/config/kernel-check-disk-size-change.m4 \
84 $(top_srcdir)/config/kernel-clear-inode.m4 \
85 $(top_srcdir)/config/kernel-commit-metadata.m4 \
86 $(top_srcdir)/config/kernel-create-nameidata.m4 \
87 $(top_srcdir)/config/kernel-current_bio_tail.m4 \
88 $(top_srcdir)/config/kernel-d-make-root.m4 \
89 $(top_srcdir)/config/kernel-d-obtain-alias.m4 \
90 $(top_srcdir)/config/kernel-d-prune-aliases.m4 \
91 $(top_srcdir)/config/kernel-declare-event-class.m4 \
92 $(top_srcdir)/config/kernel-dentry-operations.m4 \
93 $(top_srcdir)/config/kernel-dirty-inode.m4 \
94 $(top_srcdir)/config/kernel-discard-granularity.m4 \
95 $(top_srcdir)/config/kernel-elevator-change.m4 \
96 $(top_srcdir)/config/kernel-encode-fh-inode.m4 \
97 $(top_srcdir)/config/kernel-evict-inode.m4 \
98 $(top_srcdir)/config/kernel-fallocate.m4 \
99 $(top_srcdir)/config/kernel-file-inode.m4 \
100 $(top_srcdir)/config/kernel-fmode-t.m4 \
101 $(top_srcdir)/config/kernel-follow-down-one.m4 \
102 $(top_srcdir)/config/kernel-follow-link-nameidata.m4 \
103 $(top_srcdir)/config/kernel-fsync.m4 \
104 $(top_srcdir)/config/kernel-generic_io_acct.m4 \
105 $(top_srcdir)/config/kernel-get-disk-ro.m4 \
106 $(top_srcdir)/config/kernel-get-gendisk.m4 \
107 $(top_srcdir)/config/kernel-insert-inode-locked.m4 \
108 $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
109 $(top_srcdir)/config/kernel-is_owner_or_cap.m4 \
110 $(top_srcdir)/config/kernel-kmap-atomic-args.m4 \
111 $(top_srcdir)/config/kernel-kobj-name-len.m4 \
112 $(top_srcdir)/config/kernel-lookup-bdev.m4 \
113 $(top_srcdir)/config/kernel-lookup-nameidata.m4 \
114 $(top_srcdir)/config/kernel-lseek-execute.m4 \
115 $(top_srcdir)/config/kernel-mk-request-fn.m4 \
116 $(top_srcdir)/config/kernel-mkdir-umode-t.m4 \
117 $(top_srcdir)/config/kernel-mount-nodev.m4 \
118 $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
119 $(top_srcdir)/config/kernel-put-link-nameidata.m4 \
120 $(top_srcdir)/config/kernel-security-inode-init.m4 \
121 $(top_srcdir)/config/kernel-set-nlink.m4 \
122 $(top_srcdir)/config/kernel-sget-args.m4 \
123 $(top_srcdir)/config/kernel-show-options.m4 \
124 $(top_srcdir)/config/kernel-shrink.m4 \
125 $(top_srcdir)/config/kernel-truncate-range.m4 \
126 $(top_srcdir)/config/kernel-truncate-setsize.m4 \
127 $(top_srcdir)/config/kernel-vfs-iterate.m4 \
128 $(top_srcdir)/config/kernel-vfs-rw-iterate.m4 \
129 $(top_srcdir)/config/kernel-xattr-handler.m4 \
130 $(top_srcdir)/config/kernel.m4 $(top_srcdir)/config/libtool.m4 \
131 $(top_srcdir)/config/ltoptions.m4 \
132 $(top_srcdir)/config/ltsugar.m4 \
133 $(top_srcdir)/config/ltversion.m4 \
134 $(top_srcdir)/config/lt~obsolete.m4 \
135 $(top_srcdir)/config/mount-helper.m4 \
136 $(top_srcdir)/config/user-arch.m4 \
137 $(top_srcdir)/config/user-dracut.m4 \
138 $(top_srcdir)/config/user-frame-larger-than.m4 \
139 $(top_srcdir)/config/user-libblkid.m4 \
140 $(top_srcdir)/config/user-libuuid.m4 \
141 $(top_srcdir)/config/user-runstatedir.m4 \
142 $(top_srcdir)/config/user-systemd.m4 \
143 $(top_srcdir)/config/user-sysvinit.m4 \
144 $(top_srcdir)/config/user-udev.m4 \
145 $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
146 $(top_srcdir)/config/zfs-build.m4 \
147 $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
148 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
149 $(ACLOCAL_M4)
150 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
151 configure.lineno config.status.lineno
152 mkinstalldirs = $(install_sh) -d
153 CONFIG_HEADER = zfs_config.h
154 CONFIG_CLEAN_FILES = module/Makefile module/avl/Makefile \
155 module/nvpair/Makefile module/unicode/Makefile \
156 module/zcommon/Makefile module/zfs/Makefile \
157 module/zpios/Makefile zfs-script-config.sh zfs.release
158 CONFIG_CLEAN_VPATH_FILES =
159 AM_V_GEN = $(am__v_GEN_@AM_V@)
160 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
161 am__v_GEN_0 = @echo " GEN " $@;
162 AM_V_at = $(am__v_at_@AM_V@)
163 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
164 am__v_at_0 = @
165 SOURCES =
166 DIST_SOURCES =
167 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
168 html-recursive info-recursive install-data-recursive \
169 install-dvi-recursive install-exec-recursive \
170 install-html-recursive install-info-recursive \
171 install-pdf-recursive install-ps-recursive install-recursive \
172 installcheck-recursive installdirs-recursive pdf-recursive \
173 ps-recursive uninstall-recursive
174 am__extra_HEADERS_DIST = zfs.release.in zfs_config.h.in
175 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
176 am__vpath_adj = case $$p in \
177 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
178 *) f=$$p;; \
179 esac;
180 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
181 am__install_max = 40
182 am__nobase_strip_setup = \
183 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
184 am__nobase_strip = \
185 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
186 am__nobase_list = $(am__nobase_strip_setup); \
187 for p in $$list; do echo "$$p $$p"; done | \
188 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
189 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
190 if (++n[$$2] == $(am__install_max)) \
191 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
192 END { for (dir in files) print dir, files[dir] }'
193 am__base_list = \
194 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
195 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
196 am__uninstall_files_from_dir = { \
197 test -z "$$files" \
198 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
199 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
200 $(am__cd) "$$dir" && rm -f $$files; }; \
201 }
202 am__installdirs = "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"
203 HEADERS = $(extra_HEADERS) $(nodist_kernel_HEADERS)
204 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
205 distclean-recursive maintainer-clean-recursive
206 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
207 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
208 distdir dist dist-all distcheck
209 ETAGS = etags
210 CTAGS = ctags
211 DIST_SUBDIRS = include rpm udev etc man scripts lib cmd contrib module
212 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
213 distdir = $(PACKAGE)-$(VERSION)
214 top_distdir = $(distdir)
215 am__remove_distdir = \
216 if test -d "$(distdir)"; then \
217 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
218 && rm -rf "$(distdir)" \
219 || { sleep 5 && rm -rf "$(distdir)"; }; \
220 else :; fi
221 am__relativize = \
222 dir0=`pwd`; \
223 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
224 sed_rest='s,^[^/]*/*,,'; \
225 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
226 sed_butlast='s,/*[^/]*$$,,'; \
227 while test -n "$$dir1"; do \
228 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
229 if test "$$first" != "."; then \
230 if test "$$first" = ".."; then \
231 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
232 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
233 else \
234 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
235 if test "$$first2" = "$$first"; then \
236 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
237 else \
238 dir2="../$$dir2"; \
239 fi; \
240 dir0="$$dir0"/"$$first"; \
241 fi; \
242 fi; \
243 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
244 done; \
245 reldir="$$dir2"
246 DIST_ARCHIVES = $(distdir).tar.gz
247 GZIP_ENV = --best
248 distuninstallcheck_listfiles = find . -type f -print
249 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
250 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
251 distcleancheck_listfiles = find . -type f -print
252 ACLOCAL = @ACLOCAL@
253 ALIEN = @ALIEN@
254 ALIEN_VERSION = @ALIEN_VERSION@
255 AMTAR = @AMTAR@
256 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
257 AR = @AR@
258 AUTOCONF = @AUTOCONF@
259 AUTOHEADER = @AUTOHEADER@
260 AUTOMAKE = @AUTOMAKE@
261 AWK = @AWK@
262 CC = @CC@
263 CCAS = @CCAS@
264 CCASDEPMODE = @CCASDEPMODE@
265 CCASFLAGS = @CCASFLAGS@
266 CCDEPMODE = @CCDEPMODE@
267 CFLAGS = @CFLAGS@
268 CPP = @CPP@
269 CPPFLAGS = @CPPFLAGS@
270 CYGPATH_W = @CYGPATH_W@
271 DEBUG_CFLAGS = @DEBUG_CFLAGS@
272 DEBUG_DMU_TX = @DEBUG_DMU_TX@
273 DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
274 DEBUG_ZFS = @DEBUG_ZFS@
275 DEFAULT_INITCONF_DIR = @DEFAULT_INITCONF_DIR@
276 DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
277 DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
278 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
279 DEFINE_INITRAMFS = @DEFINE_INITRAMFS@
280 DEFS = @DEFS@
281 DEPDIR = @DEPDIR@
282 DLLTOOL = @DLLTOOL@
283 DPKG = @DPKG@
284 DPKGBUILD = @DPKGBUILD@
285 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
286 DPKG_VERSION = @DPKG_VERSION@
287 DSYMUTIL = @DSYMUTIL@
288 DUMPBIN = @DUMPBIN@
289 ECHO_C = @ECHO_C@
290 ECHO_N = @ECHO_N@
291 ECHO_T = @ECHO_T@
292 EGREP = @EGREP@
293 EXEEXT = @EXEEXT@
294 FGREP = @FGREP@
295 FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
296 GREP = @GREP@
297 HAVE_ALIEN = @HAVE_ALIEN@
298 HAVE_DPKG = @HAVE_DPKG@
299 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
300 HAVE_RPM = @HAVE_RPM@
301 HAVE_RPMBUILD = @HAVE_RPMBUILD@
302 INSTALL = @INSTALL@
303 INSTALL_DATA = @INSTALL_DATA@
304 INSTALL_PROGRAM = @INSTALL_PROGRAM@
305 INSTALL_SCRIPT = @INSTALL_SCRIPT@
306 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
307 KERNELCPPFLAGS = @KERNELCPPFLAGS@
308 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
309 LD = @LD@
310 LDFLAGS = @LDFLAGS@
311 LIBBLKID = @LIBBLKID@
312 LIBOBJS = @LIBOBJS@
313 LIBS = @LIBS@
314 LIBTOOL = @LIBTOOL@
315 LIBUUID = @LIBUUID@
316 LINUX = @LINUX@
317 LINUX_OBJ = @LINUX_OBJ@
318 LINUX_SYMBOLS = @LINUX_SYMBOLS@
319 LINUX_VERSION = @LINUX_VERSION@
320 LIPO = @LIPO@
321 LN_S = @LN_S@
322 LTLIBOBJS = @LTLIBOBJS@
323 MAINT = @MAINT@
324 MAKEINFO = @MAKEINFO@
325 MANIFEST_TOOL = @MANIFEST_TOOL@
326 MKDIR_P = @MKDIR_P@
327 NM = @NM@
328 NMEDIT = @NMEDIT@
329 NO_BOOL_COMPARE = @NO_BOOL_COMPARE@
330 NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
331 OBJDUMP = @OBJDUMP@
332 OBJEXT = @OBJEXT@
333 OTOOL = @OTOOL@
334 OTOOL64 = @OTOOL64@
335 PACKAGE = @PACKAGE@
336 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
337 PACKAGE_NAME = @PACKAGE_NAME@
338 PACKAGE_STRING = @PACKAGE_STRING@
339 PACKAGE_TARNAME = @PACKAGE_TARNAME@
340 PACKAGE_URL = @PACKAGE_URL@
341 PACKAGE_VERSION = @PACKAGE_VERSION@
342 PATH_SEPARATOR = @PATH_SEPARATOR@
343 RANLIB = @RANLIB@
344 RELEASE = @RELEASE@
345 RPM = @RPM@
346 RPMBUILD = @RPMBUILD@
347 RPMBUILD_VERSION = @RPMBUILD_VERSION@
348 RPM_DEFINE_COMMON = @RPM_DEFINE_COMMON@
349 RPM_DEFINE_DKMS = @RPM_DEFINE_DKMS@
350 RPM_DEFINE_KMOD = @RPM_DEFINE_KMOD@
351 RPM_DEFINE_UTIL = @RPM_DEFINE_UTIL@
352 RPM_SPEC_DIR = @RPM_SPEC_DIR@
353 RPM_VERSION = @RPM_VERSION@
354 SED = @SED@
355 SET_MAKE = @SET_MAKE@
356 SHELL = @SHELL@
357 SPL = @SPL@
358 SPL_OBJ = @SPL_OBJ@
359 SPL_SYMBOLS = @SPL_SYMBOLS@
360 SPL_VERSION = @SPL_VERSION@
361 SRPM_DEFINE_COMMON = @SRPM_DEFINE_COMMON@
362 SRPM_DEFINE_DKMS = @SRPM_DEFINE_DKMS@
363 SRPM_DEFINE_KMOD = @SRPM_DEFINE_KMOD@
364 SRPM_DEFINE_UTIL = @SRPM_DEFINE_UTIL@
365 STRIP = @STRIP@
366 TARGET_ASM_DIR = @TARGET_ASM_DIR@
367 VENDOR = @VENDOR@
368 VERSION = @VERSION@
369 ZFS_CONFIG = @ZFS_CONFIG@
370 ZFS_INIT_SYSTEMD = @ZFS_INIT_SYSTEMD@
371 ZFS_INIT_SYSV = @ZFS_INIT_SYSV@
372 ZFS_META_ALIAS = @ZFS_META_ALIAS@
373 ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
374 ZFS_META_DATA = @ZFS_META_DATA@
375 ZFS_META_LICENSE = @ZFS_META_LICENSE@
376 ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
377 ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
378 ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
379 ZFS_META_NAME = @ZFS_META_NAME@
380 ZFS_META_RELEASE = @ZFS_META_RELEASE@
381 ZFS_META_VERSION = @ZFS_META_VERSION@
382 ZFS_MODULE_LOAD = @ZFS_MODULE_LOAD@
383 ZLIB = @ZLIB@
384 abs_builddir = @abs_builddir@
385 abs_srcdir = @abs_srcdir@
386 abs_top_builddir = @abs_top_builddir@
387 abs_top_srcdir = @abs_top_srcdir@
388 ac_ct_AR = @ac_ct_AR@
389 ac_ct_CC = @ac_ct_CC@
390 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
391 am__include = @am__include@
392 am__leading_dot = @am__leading_dot@
393 am__quote = @am__quote@
394 am__tar = @am__tar@
395 am__untar = @am__untar@
396 bindir = @bindir@
397 build = @build@
398 build_alias = @build_alias@
399 build_cpu = @build_cpu@
400 build_os = @build_os@
401 build_vendor = @build_vendor@
402 builddir = @builddir@
403 datadir = @datadir@
404 datarootdir = @datarootdir@
405 docdir = @docdir@
406 dracutdir = @dracutdir@
407 dvidir = @dvidir@
408 exec_prefix = @exec_prefix@
409 host = @host@
410 host_alias = @host_alias@
411 host_cpu = @host_cpu@
412 host_os = @host_os@
413 host_vendor = @host_vendor@
414 htmldir = @htmldir@
415 includedir = @includedir@
416 infodir = @infodir@
417 install_sh = @install_sh@
418 libdir = @libdir@
419 libexecdir = @libexecdir@
420 localedir = @localedir@
421 localstatedir = @localstatedir@
422 mandir = @mandir@
423 mkdir_p = @mkdir_p@
424 modulesloaddir = @modulesloaddir@
425 mounthelperdir = @mounthelperdir@
426 oldincludedir = @oldincludedir@
427 pdfdir = @pdfdir@
428 prefix = @prefix@
429 program_transform_name = @program_transform_name@
430 psdir = @psdir@
431 runstatedir = @runstatedir@
432 sbindir = @sbindir@
433 sharedstatedir = @sharedstatedir@
434 srcdir = @srcdir@
435 sysconfdir = @sysconfdir@
436 systemdpresetdir = @systemdpresetdir@
437 systemdunitdir = @systemdunitdir@
438 target = @target@
439 target_alias = @target_alias@
440 target_cpu = @target_cpu@
441 target_os = @target_os@
442 target_vendor = @target_vendor@
443 top_build_prefix = @top_build_prefix@
444 top_builddir = @top_builddir@
445 top_srcdir = @top_srcdir@
446 udevdir = @udevdir@
447 udevruledir = @udevruledir@
448 ACLOCAL_AMFLAGS = -I config
449 SUBDIRS = include rpm $(am__append_1) $(am__append_2)
450 @CONFIG_KERNEL_TRUE@extradir = @prefix@/src/zfs-$(VERSION)
451 @CONFIG_KERNEL_TRUE@extra_HEADERS = zfs.release.in zfs_config.h.in
452 @CONFIG_KERNEL_TRUE@kerneldir = @prefix@/src/zfs-$(VERSION)/$(LINUX_VERSION)
453 @CONFIG_KERNEL_TRUE@nodist_kernel_HEADERS = zfs.release zfs_config.h module/$(LINUX_SYMBOLS)
454 AUTOMAKE_OPTIONS = foreign
455 EXTRA_DIST = autogen.sh copy-builtin config/config.awk config/rpm.am \
456 config/deb.am config/tgz.am META DISCLAIMER COPYRIGHT \
457 README.markdown OPENSOLARIS.LICENSE
458 all: zfs_config.h
459 $(MAKE) $(AM_MAKEFLAGS) all-recursive
460
461 .SUFFIXES:
462 am--refresh: Makefile
463 @:
464 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am $(am__configure_deps)
465 @for dep in $?; do \
466 case '$(am__configure_deps)' in \
467 *$$dep*) \
468 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
469 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
470 && exit 0; \
471 exit 1;; \
472 esac; \
473 done; \
474 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
475 $(am__cd) $(top_srcdir) && \
476 $(AUTOMAKE) --foreign Makefile
477 .PRECIOUS: Makefile
478 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
479 @case '$?' in \
480 *config.status*) \
481 echo ' $(SHELL) ./config.status'; \
482 $(SHELL) ./config.status;; \
483 *) \
484 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
485 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
486 esac;
487 $(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am:
488
489 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
490 $(SHELL) ./config.status --recheck
491
492 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
493 $(am__cd) $(srcdir) && $(AUTOCONF)
494 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
495 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
496 $(am__aclocal_m4_deps):
497
498 zfs_config.h: stamp-h1
499 @if test ! -f $@; then rm -f stamp-h1; else :; fi
500 @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
501
502 stamp-h1: $(srcdir)/zfs_config.h.in $(top_builddir)/config.status
503 @rm -f stamp-h1
504 cd $(top_builddir) && $(SHELL) ./config.status zfs_config.h
505 $(srcdir)/zfs_config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
506 ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
507 rm -f stamp-h1
508 touch $@
509
510 distclean-hdr:
511 -rm -f zfs_config.h stamp-h1
512 module/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/Makefile.in
513 cd $(top_builddir) && $(SHELL) ./config.status $@
514 module/avl/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/avl/Makefile.in
515 cd $(top_builddir) && $(SHELL) ./config.status $@
516 module/nvpair/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/nvpair/Makefile.in
517 cd $(top_builddir) && $(SHELL) ./config.status $@
518 module/unicode/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/unicode/Makefile.in
519 cd $(top_builddir) && $(SHELL) ./config.status $@
520 module/zcommon/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zcommon/Makefile.in
521 cd $(top_builddir) && $(SHELL) ./config.status $@
522 module/zfs/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zfs/Makefile.in
523 cd $(top_builddir) && $(SHELL) ./config.status $@
524 module/zpios/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zpios/Makefile.in
525 cd $(top_builddir) && $(SHELL) ./config.status $@
526 zfs-script-config.sh: $(top_builddir)/config.status $(srcdir)/zfs-script-config.sh.in
527 cd $(top_builddir) && $(SHELL) ./config.status $@
528 zfs.release: $(top_builddir)/config.status $(srcdir)/zfs.release.in
529 cd $(top_builddir) && $(SHELL) ./config.status $@
530
531 mostlyclean-libtool:
532 -rm -f *.lo
533
534 clean-libtool:
535 -rm -rf .libs _libs
536
537 distclean-libtool:
538 -rm -f libtool config.lt
539 install-extraHEADERS: $(extra_HEADERS)
540 @$(NORMAL_INSTALL)
541 test -z "$(extradir)" || $(MKDIR_P) "$(DESTDIR)$(extradir)"
542 @list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \
543 for p in $$list; do \
544 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
545 echo "$$d$$p"; \
546 done | $(am__base_list) | \
547 while read files; do \
548 echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(extradir)'"; \
549 $(INSTALL_HEADER) $$files "$(DESTDIR)$(extradir)" || exit $$?; \
550 done
551
552 uninstall-extraHEADERS:
553 @$(NORMAL_UNINSTALL)
554 @list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \
555 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
556 dir='$(DESTDIR)$(extradir)'; $(am__uninstall_files_from_dir)
557 install-nodist_kernelHEADERS: $(nodist_kernel_HEADERS)
558 @$(NORMAL_INSTALL)
559 test -z "$(kerneldir)" || $(MKDIR_P) "$(DESTDIR)$(kerneldir)"
560 @list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
561 for p in $$list; do \
562 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
563 echo "$$d$$p"; \
564 done | $(am__base_list) | \
565 while read files; do \
566 echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(kerneldir)'"; \
567 $(INSTALL_HEADER) $$files "$(DESTDIR)$(kerneldir)" || exit $$?; \
568 done
569
570 uninstall-nodist_kernelHEADERS:
571 @$(NORMAL_UNINSTALL)
572 @list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
573 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
574 dir='$(DESTDIR)$(kerneldir)'; $(am__uninstall_files_from_dir)
575
576 # This directory's subdirectories are mostly independent; you can cd
577 # into them and run `make' without going through this Makefile.
578 # To change the values of `make' variables: instead of editing Makefiles,
579 # (1) if the variable is set in `config.status', edit `config.status'
580 # (which will cause the Makefiles to be regenerated when you run `make');
581 # (2) otherwise, pass the desired values on the `make' command line.
582 $(RECURSIVE_TARGETS):
583 @fail= failcom='exit 1'; \
584 for f in x $$MAKEFLAGS; do \
585 case $$f in \
586 *=* | --[!k]*);; \
587 *k*) failcom='fail=yes';; \
588 esac; \
589 done; \
590 dot_seen=no; \
591 target=`echo $@ | sed s/-recursive//`; \
592 list='$(SUBDIRS)'; for subdir in $$list; do \
593 echo "Making $$target in $$subdir"; \
594 if test "$$subdir" = "."; then \
595 dot_seen=yes; \
596 local_target="$$target-am"; \
597 else \
598 local_target="$$target"; \
599 fi; \
600 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
601 || eval $$failcom; \
602 done; \
603 if test "$$dot_seen" = "no"; then \
604 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
605 fi; test -z "$$fail"
606
607 $(RECURSIVE_CLEAN_TARGETS):
608 @fail= failcom='exit 1'; \
609 for f in x $$MAKEFLAGS; do \
610 case $$f in \
611 *=* | --[!k]*);; \
612 *k*) failcom='fail=yes';; \
613 esac; \
614 done; \
615 dot_seen=no; \
616 case "$@" in \
617 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
618 *) list='$(SUBDIRS)' ;; \
619 esac; \
620 rev=''; for subdir in $$list; do \
621 if test "$$subdir" = "."; then :; else \
622 rev="$$subdir $$rev"; \
623 fi; \
624 done; \
625 rev="$$rev ."; \
626 target=`echo $@ | sed s/-recursive//`; \
627 for subdir in $$rev; do \
628 echo "Making $$target in $$subdir"; \
629 if test "$$subdir" = "."; then \
630 local_target="$$target-am"; \
631 else \
632 local_target="$$target"; \
633 fi; \
634 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
635 || eval $$failcom; \
636 done && test -z "$$fail"
637 tags-recursive:
638 list='$(SUBDIRS)'; for subdir in $$list; do \
639 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
640 done
641 ctags-recursive:
642 list='$(SUBDIRS)'; for subdir in $$list; do \
643 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
644 done
645
646 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
647 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
648 unique=`for i in $$list; do \
649 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
650 done | \
651 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
652 END { if (nonempty) { for (i in files) print i; }; }'`; \
653 mkid -fID $$unique
654
655 TAGS: tags-recursive $(HEADERS) $(SOURCES) zfs_config.h.in $(TAGS_DEPENDENCIES) \
656 $(TAGS_FILES) $(LISP)
657 set x; \
658 here=`pwd`; \
659 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
660 include_option=--etags-include; \
661 empty_fix=.; \
662 else \
663 include_option=--include; \
664 empty_fix=; \
665 fi; \
666 list='$(SUBDIRS)'; for subdir in $$list; do \
667 if test "$$subdir" = .; then :; else \
668 test ! -f $$subdir/TAGS || \
669 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
670 fi; \
671 done; \
672 list='$(SOURCES) $(HEADERS) zfs_config.h.in $(LISP) $(TAGS_FILES)'; \
673 unique=`for i in $$list; do \
674 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
675 done | \
676 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
677 END { if (nonempty) { for (i in files) print i; }; }'`; \
678 shift; \
679 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
680 test -n "$$unique" || unique=$$empty_fix; \
681 if test $$# -gt 0; then \
682 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
683 "$$@" $$unique; \
684 else \
685 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
686 $$unique; \
687 fi; \
688 fi
689 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) zfs_config.h.in $(TAGS_DEPENDENCIES) \
690 $(TAGS_FILES) $(LISP)
691 list='$(SOURCES) $(HEADERS) zfs_config.h.in $(LISP) $(TAGS_FILES)'; \
692 unique=`for i in $$list; do \
693 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
694 done | \
695 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
696 END { if (nonempty) { for (i in files) print i; }; }'`; \
697 test -z "$(CTAGS_ARGS)$$unique" \
698 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
699 $$unique
700
701 GTAGS:
702 here=`$(am__cd) $(top_builddir) && pwd` \
703 && $(am__cd) $(top_srcdir) \
704 && gtags -i $(GTAGS_ARGS) "$$here"
705
706 distclean-tags:
707 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
708
709 distdir: $(DISTFILES)
710 $(am__remove_distdir)
711 test -d "$(distdir)" || mkdir "$(distdir)"
712 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
713 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
714 list='$(DISTFILES)'; \
715 dist_files=`for file in $$list; do echo $$file; done | \
716 sed -e "s|^$$srcdirstrip/||;t" \
717 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
718 case $$dist_files in \
719 */*) $(MKDIR_P) `echo "$$dist_files" | \
720 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
721 sort -u` ;; \
722 esac; \
723 for file in $$dist_files; do \
724 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
725 if test -d $$d/$$file; then \
726 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
727 if test -d "$(distdir)/$$file"; then \
728 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
729 fi; \
730 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
731 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
732 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
733 fi; \
734 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
735 else \
736 test -f "$(distdir)/$$file" \
737 || cp -p $$d/$$file "$(distdir)/$$file" \
738 || exit 1; \
739 fi; \
740 done
741 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
742 if test "$$subdir" = .; then :; else \
743 test -d "$(distdir)/$$subdir" \
744 || $(MKDIR_P) "$(distdir)/$$subdir" \
745 || exit 1; \
746 fi; \
747 done
748 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
749 if test "$$subdir" = .; then :; else \
750 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
751 $(am__relativize); \
752 new_distdir=$$reldir; \
753 dir1=$$subdir; dir2="$(top_distdir)"; \
754 $(am__relativize); \
755 new_top_distdir=$$reldir; \
756 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
757 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
758 ($(am__cd) $$subdir && \
759 $(MAKE) $(AM_MAKEFLAGS) \
760 top_distdir="$$new_top_distdir" \
761 distdir="$$new_distdir" \
762 am__remove_distdir=: \
763 am__skip_length_check=: \
764 am__skip_mode_fix=: \
765 distdir) \
766 || exit 1; \
767 fi; \
768 done
769 $(MAKE) $(AM_MAKEFLAGS) \
770 top_distdir="$(top_distdir)" distdir="$(distdir)" \
771 dist-hook
772 -test -n "$(am__skip_mode_fix)" \
773 || find "$(distdir)" -type d ! -perm -755 \
774 -exec chmod u+rwx,go+rx {} \; -o \
775 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
776 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
777 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
778 || chmod -R a+r "$(distdir)"
779 dist-gzip: distdir
780 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
781 $(am__remove_distdir)
782
783 dist-bzip2: distdir
784 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
785 $(am__remove_distdir)
786
787 dist-lzip: distdir
788 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
789 $(am__remove_distdir)
790
791 dist-lzma: distdir
792 tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
793 $(am__remove_distdir)
794
795 dist-xz: distdir
796 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
797 $(am__remove_distdir)
798
799 dist-tarZ: distdir
800 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
801 $(am__remove_distdir)
802
803 dist-shar: distdir
804 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
805 $(am__remove_distdir)
806
807 dist-zip: distdir
808 -rm -f $(distdir).zip
809 zip -rq $(distdir).zip $(distdir)
810 $(am__remove_distdir)
811
812 dist dist-all: distdir
813 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
814 $(am__remove_distdir)
815
816 # This target untars the dist file and tries a VPATH configuration. Then
817 # it guarantees that the distribution is self-contained by making another
818 # tarfile.
819 distcheck: dist
820 case '$(DIST_ARCHIVES)' in \
821 *.tar.gz*) \
822 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
823 *.tar.bz2*) \
824 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
825 *.tar.lzma*) \
826 lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
827 *.tar.lz*) \
828 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
829 *.tar.xz*) \
830 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
831 *.tar.Z*) \
832 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
833 *.shar.gz*) \
834 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
835 *.zip*) \
836 unzip $(distdir).zip ;;\
837 esac
838 chmod -R a-w $(distdir); chmod a+w $(distdir)
839 mkdir $(distdir)/_build
840 mkdir $(distdir)/_inst
841 chmod a-w $(distdir)
842 test -d $(distdir)/_build || exit 0; \
843 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
844 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
845 && am__cwd=`pwd` \
846 && $(am__cd) $(distdir)/_build \
847 && ../configure --srcdir=.. --prefix="$$dc_install_base" \
848 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
849 $(DISTCHECK_CONFIGURE_FLAGS) \
850 && $(MAKE) $(AM_MAKEFLAGS) \
851 && $(MAKE) $(AM_MAKEFLAGS) dvi \
852 && $(MAKE) $(AM_MAKEFLAGS) check \
853 && $(MAKE) $(AM_MAKEFLAGS) install \
854 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
855 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
856 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
857 distuninstallcheck \
858 && chmod -R a-w "$$dc_install_base" \
859 && ({ \
860 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
861 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
862 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
863 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
864 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
865 } || { rm -rf "$$dc_destdir"; exit 1; }) \
866 && rm -rf "$$dc_destdir" \
867 && $(MAKE) $(AM_MAKEFLAGS) dist \
868 && rm -rf $(DIST_ARCHIVES) \
869 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
870 && cd "$$am__cwd" \
871 || exit 1
872 $(am__remove_distdir)
873 @(echo "$(distdir) archives ready for distribution: "; \
874 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
875 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
876 distuninstallcheck:
877 @test -n '$(distuninstallcheck_dir)' || { \
878 echo 'ERROR: trying to run $@ with an empty' \
879 '$$(distuninstallcheck_dir)' >&2; \
880 exit 1; \
881 }; \
882 $(am__cd) '$(distuninstallcheck_dir)' || { \
883 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
884 exit 1; \
885 }; \
886 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
887 || { echo "ERROR: files left after uninstall:" ; \
888 if test -n "$(DESTDIR)"; then \
889 echo " (check DESTDIR support)"; \
890 fi ; \
891 $(distuninstallcheck_listfiles) ; \
892 exit 1; } >&2
893 distcleancheck: distclean
894 @if test '$(srcdir)' = . ; then \
895 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
896 exit 1 ; \
897 fi
898 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
899 || { echo "ERROR: files left in build directory after distclean:" ; \
900 $(distcleancheck_listfiles) ; \
901 exit 1; } >&2
902 check-am: all-am
903 check: check-recursive
904 all-am: Makefile $(HEADERS) zfs_config.h
905 installdirs: installdirs-recursive
906 installdirs-am:
907 for dir in "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"; do \
908 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
909 done
910 install: install-recursive
911 install-exec: install-exec-recursive
912 install-data: install-data-recursive
913 uninstall: uninstall-recursive
914
915 install-am: all-am
916 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
917
918 installcheck: installcheck-recursive
919 install-strip:
920 if test -z '$(STRIP)'; then \
921 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
922 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
923 install; \
924 else \
925 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
926 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
927 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
928 fi
929 mostlyclean-generic:
930
931 clean-generic:
932
933 distclean-generic:
934 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
935 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
936
937 maintainer-clean-generic:
938 @echo "This command is intended for maintainers to use"
939 @echo "it deletes files that may require special tools to rebuild."
940 clean: clean-recursive
941
942 clean-am: clean-generic clean-libtool mostlyclean-am
943
944 distclean: distclean-recursive
945 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
946 -rm -f Makefile
947 distclean-am: clean-am distclean-generic distclean-hdr \
948 distclean-libtool distclean-local distclean-tags
949
950 dvi: dvi-recursive
951
952 dvi-am:
953
954 html: html-recursive
955
956 html-am:
957
958 info: info-recursive
959
960 info-am:
961
962 install-data-am: install-extraHEADERS install-nodist_kernelHEADERS
963
964 install-dvi: install-dvi-recursive
965
966 install-dvi-am:
967
968 install-exec-am:
969
970 install-html: install-html-recursive
971
972 install-html-am:
973
974 install-info: install-info-recursive
975
976 install-info-am:
977
978 install-man:
979
980 install-pdf: install-pdf-recursive
981
982 install-pdf-am:
983
984 install-ps: install-ps-recursive
985
986 install-ps-am:
987
988 installcheck-am:
989
990 maintainer-clean: maintainer-clean-recursive
991 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
992 -rm -rf $(top_srcdir)/autom4te.cache
993 -rm -f Makefile
994 maintainer-clean-am: distclean-am maintainer-clean-generic
995
996 mostlyclean: mostlyclean-recursive
997
998 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
999
1000 pdf: pdf-recursive
1001
1002 pdf-am:
1003
1004 ps: ps-recursive
1005
1006 ps-am:
1007
1008 uninstall-am: uninstall-extraHEADERS uninstall-nodist_kernelHEADERS
1009
1010 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
1011 ctags-recursive install-am install-strip tags-recursive
1012
1013 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
1014 all all-am am--refresh check check-am clean clean-generic \
1015 clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
1016 dist-gzip dist-hook dist-lzip dist-lzma dist-shar dist-tarZ \
1017 dist-xz dist-zip distcheck distclean distclean-generic \
1018 distclean-hdr distclean-libtool distclean-local distclean-tags \
1019 distcleancheck distdir distuninstallcheck dvi dvi-am html \
1020 html-am info info-am install install-am install-data \
1021 install-data-am install-dvi install-dvi-am install-exec \
1022 install-exec-am install-extraHEADERS install-html \
1023 install-html-am install-info install-info-am install-man \
1024 install-nodist_kernelHEADERS install-pdf install-pdf-am \
1025 install-ps install-ps-am install-strip installcheck \
1026 installcheck-am installdirs installdirs-am maintainer-clean \
1027 maintainer-clean-generic mostlyclean mostlyclean-generic \
1028 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
1029 uninstall uninstall-am uninstall-extraHEADERS \
1030 uninstall-nodist_kernelHEADERS
1031
1032
1033 srpm-kmod:
1034 $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \
1035 def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_KMOD}' srpm-common
1036
1037 srpm-dkms:
1038 $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \
1039 def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_DKMS}' srpm-common
1040
1041 srpm-utils:
1042 $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \
1043 def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_UTIL}' srpm-common
1044
1045 srpm: srpm-kmod srpm-dkms srpm-utils
1046 srpms: srpm-kmod srpm-dkms srpm-utils
1047
1048 rpm-kmod: srpm-kmod
1049 $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \
1050 def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_KMOD}' rpm-common
1051
1052 rpm-dkms: srpm-dkms
1053 $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \
1054 def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_DKMS}' rpm-common
1055
1056 rpm-utils: srpm-utils
1057 $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \
1058 def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_UTIL}' rpm-common
1059
1060 rpm: rpm-kmod rpm-dkms rpm-utils
1061 rpms: rpm-kmod rpm-dkms rpm-utils
1062
1063 rpm-local:
1064 @(if test "${HAVE_RPMBUILD}" = "no"; then \
1065 echo -e "\n" \
1066 "*** Required util ${RPMBUILD} missing. Please install the\n" \
1067 "*** package for your distribution which provides ${RPMBUILD},\n" \
1068 "*** re-run configure, and try again.\n"; \
1069 exit 1; \
1070 fi; \
1071 mkdir -p $(rpmbuild)/TMP && \
1072 mkdir -p $(rpmbuild)/BUILD && \
1073 mkdir -p $(rpmbuild)/RPMS && \
1074 mkdir -p $(rpmbuild)/SRPMS && \
1075 mkdir -p $(rpmbuild)/SPECS && \
1076 cp ${RPM_SPEC_DIR}/$(rpmspec) $(rpmbuild)/SPECS && \
1077 mkdir -p $(rpmbuild)/SOURCES && \
1078 cp $(top_srcdir)/scripts/kmodtool $(rpmbuild)/SOURCES && \
1079 cp $(distdir).tar.gz $(rpmbuild)/SOURCES)
1080
1081 srpm-common: dist
1082 @(dist=`$(RPM) --eval %{?dist}`; \
1083 rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \
1084 rpmspec=$(pkg).spec; \
1085 rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
1086 $(MAKE) $(AM_MAKEFLAGS) \
1087 rpmbuild="$$rpmbuild" \
1088 rpmspec="$$rpmspec" \
1089 rpm-local || exit 1; \
1090 LANG=C $(RPMBUILD) \
1091 --define "_tmppath $$rpmbuild/TMP" \
1092 --define "_topdir $$rpmbuild" \
1093 $(def) -bs $$rpmbuild/SPECS/$$rpmspec || exit 1; \
1094 cp $$rpmbuild/SRPMS/$$rpmpkg . || exit 1; \
1095 rm -R $$rpmbuild)
1096
1097 rpm-common:
1098 @(dist=`$(RPM) --eval %{?dist}`; \
1099 rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \
1100 rpmspec=$(pkg).spec; \
1101 rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
1102 $(MAKE) $(AM_MAKEFLAGS) \
1103 rpmbuild="$$rpmbuild" \
1104 rpmspec="$$rpmspec" \
1105 rpm-local || exit 1; \
1106 LANG=C ${RPMBUILD} \
1107 --define "_tmppath $$rpmbuild/TMP" \
1108 --define "_topdir $$rpmbuild" \
1109 $(def) --rebuild $$rpmpkg || exit 1; \
1110 cp $$rpmbuild/RPMS/*/* . || exit 1; \
1111 rm -R $$rpmbuild)
1112 deb-local:
1113 @(if test "${HAVE_DPKGBUILD}" = "no"; then \
1114 echo -e "\n" \
1115 "*** Required util ${DPKGBUILD} missing. Please install the\n" \
1116 "*** package for your distribution which provides ${DPKGBUILD},\n" \
1117 "*** re-run configure, and try again.\n"; \
1118 exit 1; \
1119 fi; \
1120 if test "${HAVE_ALIEN}" = "no"; then \
1121 echo -e "\n" \
1122 "*** Required util ${ALIEN} missing. Please install the\n" \
1123 "*** package for your distribution which provides ${ALIEN},\n" \
1124 "*** re-run configure, and try again.\n"; \
1125 exit 1; \
1126 fi)
1127
1128 deb-kmod: deb-local rpm-kmod
1129 @CONFIG_KERNEL_TRUE@ name=${PACKAGE}; \
1130 @CONFIG_KERNEL_TRUE@ version=${VERSION}-${RELEASE}; \
1131 @CONFIG_KERNEL_TRUE@ arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \
1132 @CONFIG_KERNEL_TRUE@ pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \
1133 @CONFIG_KERNEL_TRUE@ fakeroot $(ALIEN) --bump=0 --scripts --to-deb $$pkg1; \
1134 @CONFIG_KERNEL_TRUE@ $(RM) $$pkg1
1135
1136 deb-utils: deb-local rpm-utils
1137 @CONFIG_USER_TRUE@ name=${PACKAGE}; \
1138 @CONFIG_USER_TRUE@ version=${VERSION}-${RELEASE}; \
1139 @CONFIG_USER_TRUE@ arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
1140 @CONFIG_USER_TRUE@ pkg1=$${name}-$${version}.$${arch}.rpm; \
1141 @CONFIG_USER_TRUE@ pkg2=libnvpair1-$${version}.$${arch}.rpm; \
1142 @CONFIG_USER_TRUE@ pkg3=libuutil1-$${version}.$${arch}.rpm; \
1143 @CONFIG_USER_TRUE@ pkg4=libzfs2-$${version}.$${arch}.rpm; \
1144 @CONFIG_USER_TRUE@ pkg5=libzpool2-$${version}.$${arch}.rpm; \
1145 @CONFIG_USER_TRUE@ pkg6=libzfs2-devel-$${version}.$${arch}.rpm; \
1146 @CONFIG_USER_TRUE@ pkg7=$${name}-test-$${version}.$${arch}.rpm; \
1147 @CONFIG_USER_TRUE@ pkg8=$${name}-dracut-$${version}.$${arch}.rpm; \
1148 @CONFIG_USER_TRUE@ pkg9=$${name}-initramfs-$${version}.$${arch}.rpm; \
1149 @CONFIG_USER_TRUE@ fakeroot $(ALIEN) --bump=0 --scripts --to-deb \
1150 @CONFIG_USER_TRUE@ $$pkg1 $$pkg2 $$pkg3 $$pkg4 $$pkg5 $$pkg6 $$pkg7 \
1151 @CONFIG_USER_TRUE@ $$pkg8 $$pkg9;
1152 @CONFIG_USER_TRUE@ $(RM) $$pkg1 $$pkg2 $$pkg3 $$pkg4 $$pkg5 $$pkg6 $$pkg7 \
1153 @CONFIG_USER_TRUE@ $$pkg8 $$pkg9;
1154
1155 deb: deb-kmod deb-utils
1156 tgz-local:
1157 @(if test "${HAVE_ALIEN}" = "no"; then \
1158 echo -e "\n" \
1159 "*** Required util ${ALIEN} missing. Please install the\n" \
1160 "*** package for your distribution which provides ${ALIEN},\n" \
1161 "*** re-run configure, and try again.\n"; \
1162 exit 1; \
1163 fi)
1164
1165 tgz-kmod: tgz-local rpm-kmod
1166 @CONFIG_KERNEL_TRUE@ name=${PACKAGE}; \
1167 @CONFIG_KERNEL_TRUE@ version=${VERSION}-${RELEASE}; \
1168 @CONFIG_KERNEL_TRUE@ arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \
1169 @CONFIG_KERNEL_TRUE@ pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \
1170 @CONFIG_KERNEL_TRUE@ fakeroot $(ALIEN) --scripts --to-tgz $$pkg1; \
1171 @CONFIG_KERNEL_TRUE@ $(RM) $$pkg1
1172
1173 tgz-utils: tgz-local rpm-utils
1174 @CONFIG_USER_TRUE@ name=${PACKAGE}; \
1175 @CONFIG_USER_TRUE@ version=${VERSION}-${RELEASE}; \
1176 @CONFIG_USER_TRUE@ arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
1177 @CONFIG_USER_TRUE@ pkg1=$${name}-$${version}.$${arch}.rpm; \
1178 @CONFIG_USER_TRUE@ pkg2=$${name}-devel-$${version}.$${arch}.rpm; \
1179 @CONFIG_USER_TRUE@ pkg3=$${name}-test-$${version}.$${arch}.rpm; \
1180 @CONFIG_USER_TRUE@ fakeroot $(ALIEN) --scripts --to-tgz $$pkg1 $$pkg2 $$pkg3; \
1181 @CONFIG_USER_TRUE@ $(RM) $$pkg1 $$pkg2 $$pkg3
1182
1183 tgz: tgz-kmod tgz-utils
1184
1185 distclean-local::
1186 -$(RM) -R autom4te*.cache
1187 -find . \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
1188 -o -name .pc -o -name .hg -o -name .git \) -prune -o \
1189 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1190 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1191 -o -name '.*.rej' -o -name '.script-config' -o -size 0 \
1192 -o -name '*%' -o -name '.*.cmd' -o -name 'core' \
1193 -o -name 'Makefile' -o -name 'Module.symvers' \
1194 -o -name '*.order' -o -name '*.markers' \) \
1195 -type f -print | xargs $(RM)
1196
1197 dist-hook:
1198 sed -i 's/Release:[[:print:]]*/Release: $(RELEASE)/' \
1199 $(distdir)/META
1200
1201 checkstyle: cstyle shellcheck
1202
1203 cstyle:
1204 @find ${top_srcdir} -name '*.[hc]' ! -name 'zfs_config.*' \
1205 ! -name '*.mod.c' -type f -exec scripts/cstyle.pl {} \+
1206
1207 shellcheck:
1208 @if type shellcheck > /dev/null 2>&1; then \
1209 (find ${top_srcdir} -type f -name '*.sh.in' -o -type f \
1210 -name '*.sh'; find etc/init.d/zfs*.in -type f) | \
1211 grep -v 'zfs-script-config' | \
1212 while read file; do \
1213 shellcheck --format gcc "$$file"; \
1214 done; \
1215 fi
1216
1217 ctags:
1218 $(RM) tags
1219 find $(top_srcdir) -name .git -prune -o -name '*.[hc]' | xargs ctags
1220
1221 etags:
1222 $(RM) TAGS
1223 find $(top_srcdir) -name .pc -prune -o -name '*.[hc]' | xargs etags -a
1224
1225 tags: ctags etags
1226
1227 pkg: @DEFAULT_PACKAGE@
1228 pkg-kmod: @DEFAULT_PACKAGE@-kmod
1229 pkg-utils: @DEFAULT_PACKAGE@-utils
1230
1231 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1232 # Otherwise a system limit (for SysV at least) may be exceeded.
1233 .NOEXPORT: