4 * Added support to set packet mark for tunnel endpoint using
5 `egress_pkt_mark` OVSDB option.
9 - Utilities and daemons that support SSL now allow protocols and
10 ciphers to be configured with --ssl-protocols and --ssl-ciphers.
12 * QoS is now implemented via egress shaping rather than ingress policing.
13 * DSCP marking is now supported, via the new northbound QoS table.
14 * IPAM now supports fixed MAC addresses.
15 * Support for source IP address based routing.
17 - New --ovs option to also print OpenFlow flows.
18 - put_dhcp_opts and put_dhcp_optsv6 actions may now be traced.
19 * Support for managing SSL and remote connection configuration in
20 northbound and southbound databases.
21 * TCP connections to northbound and southbound databases are no
22 longer enabled by default and must be explicitly configured.
23 See documentation for ovn-sbctl/ovn-nbctl "set-connection"
24 command or the ovn-ctl "--db-sb-create-insecure-remote" and
25 "--db-nb-create-insecure-remote" command-line options for
26 information regarding remote connection configuration.
27 * New appctl "inject-pkt" command in ovn-controller that allows
28 packets to be injected into the connected OVS instance.
29 - Fixed regression in table stats maintenance introduced in OVS
30 2.3.0, wherein the number of OpenFlow table hits and misses was
33 * OFPT_PACKET_OUT messages are now supported in bundles.
34 * A new "selection_method=dp_hash" type for OpenFlow select group
35 bucket selection that uses the datapath computed 5-tuple hash
36 without making datapath flows match the 5-tuple fields, which
37 is useful for more efficient load balancing, for example. This
38 uses the Netronome extension to OpenFlow 1.5+ that allows
39 control over the OpenFlow select groups selection method. See
40 "selection_method" and related options in ovs-ofctl(8) for
42 * The "sample" action now supports "ingress" and "egress" options.
43 * The "ct" action now supports the TFTP ALG where support is available.
44 * New actions "clone" and "ct_clear".
46 * 'bundle' command now supports packet-out messages.
47 * New syntax for 'ovs-ofctl packet-out' command, which uses the
48 same string parser as the 'bundle' command. The old 'packet-out'
49 syntax is deprecated and will be removed in a later OVS
51 * New unixctl "ofctl/packet-out" command, which can be used to
52 instruct a flow monitor to issue OpenFlow packet-out messages.
54 * Remote connections can now be made read-only (see ovsdb-server(1)).
56 * TLV mappings for protocols such as Geneve are now segregated on
57 a per-OpenFlow bridge basis rather than globally. (The interface
59 * Removed support for IPsec tunnels.
61 * New option 'n_rxq_desc' and 'n_txq_desc' fields for DPDK interfaces
62 which set the number of rx and tx descriptors to use for the given port.
63 * Support for DPDK v16.11.
64 * Support for rx checksum offload. Refer DPDK HOWTO for details.
65 * Port Hotplug is now supported.
66 * DPDK physical ports can now have arbitrary names. The PCI address of
67 the device must be set using the 'dpdk-devargs' option. Compatibility
68 with the old dpdk<portid> naming scheme is broken, and as such a
69 device will not be available for use until a valid dpdk-devargs is
71 * Virtual DPDK Poll Mode Driver (vdev PMD) support.
73 * A package upgrade does not automatically restart OVS service.
74 - ovs-vswitchd/ovs-vsctl:
75 * Ports now have a "protected" flag. Protected ports can not forward
76 frames to other protected ports. Unprotected ports can receive and
77 forward frames to protected and other unprotected ports.
78 - ovs-vsctl, ovn-nbctl, ovn-sbctl, vtep-ctl:
79 * Database commands now accept integer ranges, e.g. "set port
80 eth0 trunks=1-10" to enable trunking VLANs 1 to 10.
84 - First supported release of OVN. See ovn-architecture(7) for more
87 * New "monitor_cond" "monitor_cond_update" and "update2" extensions to
90 * OpenFlow 1.3+ bundles now expire after 10 seconds since the
91 last time the bundle was either opened, modified, or closed.
92 * OpenFlow 1.3 Extension 230, adding OpenFlow Bundles support, is
94 * OpenFlow 1.3+ bundles are now supported for group mods as well as
95 flow mods and port mods. Both 'atomic' and 'ordered' bundle
96 flags are supported for group mods as well as flow mods.
97 * Internal OpenFlow rule representation for load and set-field
98 actions is now much more memory efficient. For a complex flow
99 table this can reduce rule memory consumption by 40%.
100 * Bundles are now much more memory efficient than in OVS 2.5.
101 Together with memory efficiency improvements in OpenFlow rule
102 representation, the peak OVS resident memory use during a
103 bundle commit for large complex set of flow mods can be only
104 25% of that in OVS 2.5 (4x lower).
105 * OpenFlow 1.1+ OFPT_QUEUE_GET_CONFIG_REQUEST now supports OFPP_ANY.
106 * OpenFlow 1.4+ OFPMP_QUEUE_DESC is now supported.
107 * OpenFlow 1.4+ OFPT_TABLE_STATUS is now supported.
108 * New property-based packet-in message format NXT_PACKET_IN2 with support
109 for arbitrary user-provided data and for serializing flow table
110 traversal into a continuation for later resumption.
111 * New extension message NXT_SET_ASYNC_CONFIG2 to allow OpenFlow 1.4-like
112 control over asynchronous messages in earlier versions of OpenFlow.
113 * New OpenFlow extension NXM_NX_MPLS_TTL to provide access to MPLS TTL.
114 * New output option, output(port=N,max_len=M), to allow truncating a
115 packet to size M bytes when outputting to port N.
116 * New command OFPGC_ADD_OR_MOD for OFPT_GROUP_MOD message that adds a
117 new group or modifies an existing groups
118 * The optional OpenFlow packet buffering feature is deprecated in
119 this release, and will be removed in the next OVS release
120 (2.7). After the change OVS always sends the 'buffer_id' as
121 0xffffffff in packet-in messages and will send an error
122 response if any other value of this field is included in
123 packet-out and flow mod sent by a controller. Controllers are
124 already expected to work properly in cases where the switch can
125 not buffer packets, so this change should not affect existing
127 * New OpenFlow extension NXT_CT_FLUSH_ZONE to flush conntrack zones.
128 - Improved OpenFlow version compatibility for actions:
129 * New OpenFlow extension to support the "group" action in OpenFlow 1.0.
130 * OpenFlow 1.0 "enqueue" action now properly translated to OpenFlow 1.1+.
131 * OpenFlow 1.1 "mod_nw_ecn" and OpenFlow 1.1+ "mod_nw_ttl" actions now
132 properly translated to OpenFlow 1.0.
134 * queue-get-config command now allows a queue ID to be specified.
135 * '--bundle' option can now be used with OpenFlow 1.3 and with group mods.
136 * New "bundle" command allows executing a mixture of flow and group mods
137 as a single atomic transaction.
138 * New option "--color" to produce colorized output for some commands.
139 * New option '--may-create' to use OFPGC_ADD_OR_MOD in mod-group command.
141 * New "sampling_port" option for "sample" action to allow sampling
142 ingress and egress tunnel metadata with IPFIX.
143 * New ovs-ofctl commands "dump-ipfix-bridge" and "dump-ipfix-flow" to
144 dump bridge IPFIX statistics and flow based IPFIX statistics.
145 * New setting other-config:virtual_obs_id to add an arbitrary string
148 * OVS Linux datapath now implements Conntrack NAT action with all
149 supported Linux kernels.
150 * Support for truncate action.
151 * New QoS type "linux-noop" that prevents Open vSwitch from trying to
152 manage QoS for a given port (useful when other software manages QoS).
154 * New option "n_rxq" for PMD interfaces.
155 Old 'other_config:n-dpdk-rxqs' is no longer supported.
156 Not supported by vHost interfaces. For them number of rx and tx queues
157 is applied from connected virtio device.
158 * New 'other_config:pmd-rxq-affinity' field for PMD interfaces, that
159 allows to pin port's rx queues to desired cores.
160 * New appctl command 'dpif-netdev/pmd-rxq-show' to check the port/rxq
162 * Type of log messages from PMD threads changed from INFO to DBG.
163 * QoS functionality with sample egress-policer implementation.
164 * The mechanism for configuring DPDK has changed to use database
165 * Sensible defaults have been introduced for many of the required
166 configuration options
167 * DB entries have been added for many of the DPDK EAL command line
168 arguments. Additional arguments can be passed via the dpdk-extra
170 * Add ingress policing functionality.
171 * PMD threads servicing vHost User ports can now come from the NUMA
172 node that device memory is located on if CONFIG_RTE_LIBRTE_VHOST_NUMA
174 * Basic connection tracking for the userspace datapath (no ALG,
175 fragmentation or NAT support yet)
176 * Support for DPDK 16.07
177 * Optional support for DPDK pdump enabled.
178 * Jumbo frame support
179 * Remove dpdkvhostcuse port type.
180 * OVS client mode for vHost and vHost reconnect (Requires QEMU 2.7)
181 * 'dpdkvhostuserclient' port type.
182 - Increase number of registers to 16.
183 - ovs-benchmark: This utility has been removed due to lack of use and
186 * New "vlog/close" command.
188 * Added the ability to selectively start the forwarding and database
189 functions (ovs-vswitchd and ovsdb-server, respectively).
191 * Remove max number of sessions limit, to enable connection scaling
194 * Added support for Python 3.4+ in addition to existing support
197 * Introduced SELinux policy package.
198 - Datapath Linux kernel compatibility.
199 * Dropped support for kernel older than 3.10.
200 * Removed VLAN splinters feature.
201 * Datapath supports kernel upto 4.7.
203 * Flow based tunnel match and action can be used for IPv6 address using
204 tun_ipv6_src, tun_ipv6_dst fields.
205 * Added support for IPv6 tunnels, for details checkout FAQ.
206 * Deprecated support for IPsec tunnels ports.
207 - A wrapper script, 'ovs-tcpdump', to easily port-mirror an OVS port and
209 - Introduce --no-self-confinement flag that allows daemons to work with
210 sockets outside their run directory.
211 - ovs-pki: Changed message digest algorithm from SHA-1 to SHA-512 because
212 SHA-1 is no longer secure and some operating systems have started to
213 disable it in OpenSSL.
214 - Add 'mtu_request' column to the Interface table. It can be used to
215 configure the MTU of the ports.
218 - Using openvswitch module in conjunction with upstream Linux tunnels:
219 * When using the openvswitch module distributed with OVS against kernel
220 versions 4.4 to 4.6, the openvswitch module cannot be loaded or used at
221 the same time as "ip_gre".
222 - Conntrack FTP ALGs: When using the openvswitch module distributed with
223 OVS, particular Linux distribution kernels versions may provide diminished
224 functionality. This typically affects active FTP data connections when
225 using "actions=ct(alg=ftp),..." in flow tables. Specifically:
226 * Centos 7.1 kernels (3.10.0-2xx) kernels are unable to correctly set
227 up expectations for FTP data connections in multiple zones,
228 eg "actions=ct(zone=1,alg=ftp),ct(zone=2,alg=ftp),...". Executing the
229 "ct" action for subsequent data connections may fail to determine that
230 the data connection is "related" to an existing connection.
231 * Centos 7.2 kernels (3.10.0-3xx) kernels may not establish FTP ALG state
232 correctly for NATed connections. As a result, flows that perform NAT,
233 eg "actions=ct(nat,ftp=alg,table=1),..." may fail to NAT the packet,
234 and will populate the "ct_state=inv" bit in the flow.
238 ---------------------
239 - Dropped support for Python older than version 2.7. As a consequence,
240 using Open vSwitch 2.5 or later on XenServer 6.5 or earlier (which
241 have Python 2.4) requires first installing Python 2.7.
243 * Group chaining (where one OpenFlow group triggers another) is
245 * OpenFlow 1.4+ "importance" is now considered for flow eviction.
246 * OpenFlow 1.4+ OFPTC_EVICTION is now implemented.
247 * OpenFlow 1.4+ OFPTC_VACANCY_EVENTS is now implemented.
248 * OpenFlow 1.4+ OFPMP_TABLE_DESC is now implemented.
249 * Allow modifying the ICMPv4/ICMPv6 type and code fields.
250 * OpenFlow 1.4+ OFPT_SET_ASYNC_CONFIG and OFPT_GET_ASYNC_CONFIG are
253 * New "out_group" keyword for OpenFlow 1.1+ matching on output group.
255 * Geneve tunnels can now match and set options and the OAM bit.
256 * The nonstandard GRE64 tunnel extension has been dropped.
257 - Support Multicast Listener Discovery (MLDv1 and MLDv2).
258 - Add 'symmetric_l3l4' and 'symmetric_l3l4+udp' hash functions.
259 - sFlow agent now reports tunnel and MPLS structures.
260 - New 'check-system-userspace', 'check-kmod' and 'check-kernel' Makefile
261 targets to run a new system testsuite. These tests can be run inside
262 a Vagrant box. See INSTALL.md for details
263 - Mark --syslog-target argument as deprecated. It will be removed in
264 the next OVS release.
265 - Added --user option to all daemons
266 - Add support for connection tracking through the new "ct" action
267 and "ct_state"/"ct_zone"/"ct_mark"/"ct_label" match fields. Only
268 available on Linux kernels with the connection tracking module loaded.
269 - Add experimental version of OVN. OVN, the Open Virtual Network, is a
270 system to support virtual network abstraction. OVN complements the
271 existing capabilities of OVS to add native support for virtual network
272 abstractions, such as virtual L2 and L3 overlays and security groups.
274 * DPDK ports may now be created via network scripts (see README.RHEL).
277 * Added multiqueue support to vhost-user
278 * Note: QEMU 2.5+ required for multiqueue support
281 ---------------------
282 - Flow table modifications are now atomic, meaning that each packet
283 now sees a coherent version of the OpenFlow pipeline. For
284 example, if a controller removes all flows with a single OpenFlow
285 "flow_mod", no packet sees an intermediate version of the OpenFlow
286 pipeline where only some of the flows have been deleted.
287 - Added support for SFQ, FQ_CoDel and CoDel qdiscs.
288 - Add bash command-line completion support for ovs-vsctl Please check
289 utilities/ovs-command-compgen.INSTALL.md for how to use.
290 - The MAC learning feature now includes per-port fairness to mitigate
291 MAC flooding attacks.
292 - New support for a "conjunctive match" OpenFlow extension, which
293 allows constructing OpenFlow matches of the form "field1 in
294 {a,b,c...} AND field2 in {d,e,f...}" and generalizations. For details,
295 see documentation for the "conjunction" action in ovs-ofctl(8).
296 - Add bash command-line completion support for ovs-appctl/ovs-dpctl/
297 ovs-ofctl/ovsdb-tool commands. Please check
298 utilities/ovs-command-compgen.INSTALL.md for how to use.
299 - The "learn" action supports a new flag "delete_learned" that causes
300 the learned flows to be deleted when the flow with the "learn" action
302 - Basic support for the Geneve tunneling protocol. It is not yet
303 possible to generate or match options. This is planned for a future
304 release. The protocol is documented at
305 http://tools.ietf.org/html/draft-gross-geneve-00
306 - The OVS database now reports controller rate limiting statistics.
307 - sflow now exports information about LACP-based bonds, port names, and
308 OpenFlow port numbers, as well as datapath performance counters.
309 - ovs-dpctl functionality is now available for datapaths integrated
310 into ovs-vswitchd, via ovs-appctl. Some existing ovs-appctl
311 commands are now redundant and will be removed in a future
312 release. See ovs-vswitchd(8) for details.
314 * OpenFlow 1.4 bundles are now supported for flow mods and port
315 mods. For flow mods, both 'atomic' and 'ordered' bundle flags
316 are trivially supported, as all bundled messages are executed
317 in the order they were added and all flow table modifications
318 are now atomic to the datapath. Port mods may not appear in
319 atomic bundles, as port status modifications are not atomic.
320 * IPv6 flow label and neighbor discovery fields are now modifiable.
321 * OpenFlow 1.5 extended registers are now supported.
322 * The OpenFlow 1.5 actset_output field is now supported.
323 * OpenFlow 1.5 Copy-Field action is now supported.
324 * OpenFlow 1.5 masked Set-Field action is now supported.
325 * OpenFlow 1.3+ table features requests are now supported (read-only).
326 * Nicira extension "move" actions may now be included in action sets.
327 * "resubmit" actions may now be included in action sets. The resubmit
328 is executed last, and only if the action set has no "output" or "group"
330 * OpenFlow 1.4+ flow "importance" is now maintained in the flow table.
331 * A new Netronome extension to OpenFlow 1.5+ allows control over the
332 fields hashed for OpenFlow select groups. See "selection_method" and
333 related options in ovs-ofctl(8) for details.
334 - ovs-ofctl has a new '--bundle' option that makes the flow mod commands
335 ('add-flow', 'add-flows', 'mod-flows', 'del-flows', and 'replace-flows')
336 use an OpenFlow 1.4 bundle to operate the modifications as a single
337 atomic transaction. If any of the flow mods in a transaction fail, none
338 of them are executed. All flow mods in a bundle appear to datapath
339 lookups simultaneously.
340 - ovs-ofctl 'add-flow' and 'add-flows' commands now accept arbitrary flow
341 mods as an input by allowing the flow specification to start with an
342 explicit 'add', 'modify', 'modify_strict', 'delete', or 'delete_strict'
343 keyword. A missing keyword is treated as 'add', so this is fully
344 backwards compatible. With the new '--bundle' option all the flow mods
345 are executed as a single atomic transaction using an OpenFlow 1.4 bundle.
346 - ovs-pki: Changed message digest algorithm from MD5 to SHA-1 because
347 MD5 is no longer secure and some operating systems have started to disable
349 - ovsdb-server: New OVSDB protocol extension allows inequality tests on
350 "optional scalar" columns. See ovsdb-server(1) for details.
351 - ovs-vsctl now permits immutable columns in a new row to be modified in
352 the same transaction that creates the row.
353 - test-controller has been renamed ovs-testcontroller at request of users
354 who find it useful for testing basic OpenFlow setups. It is still not
355 a necessary or desirable part of most Open vSwitch deployments.
356 - Support for travis-ci.org based continuous integration builds has been
357 added. Build failures are reported to build@openvswitch.org. See INSTALL.md
358 file for additional details.
359 - Support for the Rapid Spanning Tree Protocol (IEEE 802.1D-2004).
360 The implementation has been tested successfully against the Ixia Automated
361 Network Validation Library (ANVL).
362 - Stats are no longer updated on fake bond interface.
363 - Keep active bond slave selection across OVS restart.
364 - A simple wrapper script, 'ovs-docker', to integrate OVS with Docker
365 containers. If and when there is a native integration of Open vSwitch
366 with Docker, the wrapper script will be retired.
367 - Added support for DPDK Tunneling. VXLAN, GRE, and Geneve are supported
368 protocols. This is generic tunneling mechanism for userspace datapath.
369 - Support for multicast snooping (IGMPv1, IGMPv2 and IGMPv3)
370 - Support for Linux kernels up to 4.0.x
371 - The documentation now use the term 'destination' to mean one of syslog,
372 console or file for vlog logging instead of the previously used term
374 - Support for VXLAN Group Policy extension
375 - Initial support for the IETF Auto-Attach SPBM draft standard. This
376 contains rudimentary support for the LLDP protocol as needed for
378 - The default OpenFlow and OVSDB ports are now the IANA-assigned
379 numbers. OpenFlow is 6653 and OVSDB is 6640.
380 - Support for DPDK vHost.
381 - Support for outer UDP checksums in Geneve and VXLAN.
382 - The kernel vports with dependencies are no longer part of the overall
383 openvswitch.ko but built and loaded automatically as individual kernel
384 modules (vport-*.ko).
385 - Support for STT tunneling.
386 - ovs-sim: New developer tool for simulating multiple OVS instances.
387 See ovs-sim(1) for more information.
388 - Support to configure method (--syslog-method argument) that determines
389 how daemons will talk with syslog.
390 - Support for "ovs-appctl vlog/list-pattern" command that lets to query
391 logging message format for each destination.
395 ---------------------
396 - OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in
398 - Linux kernel datapath now has an exact match cache optimizing the
399 flow matching process.
400 - Datapath flows now have partially wildcarded tranport port field
401 matches. This reduces userspace upcalls, but increases the
402 number of different masks in the datapath. The kernel datapath
403 exact match cache removes the overhead of matching the incoming
404 packets with the larger number of masks, but when paired with an
405 older kernel module, some workloads may perform worse with the
407 - Compatibility with autoconf 2.63 (previously >=2.64)
409 v2.2.0 - Internal Release
410 ---------------------
411 - Internal ports are no longer brought up by default, because it
412 should be an administrator task to bring up devices as they are
414 - ovs-vsctl now reports when ovs-vswitchd fails to create a new port or
416 - Port creation and configuration errors are now stored in a new error
417 column of the Interface table and included in 'ovs-vsctl show'.
418 - The "ovsdbmonitor" graphical tool has been removed, because it was
419 poorly maintained and not widely used.
420 - New "check-ryu" Makefile target for running Ryu tests for OpenFlow
421 controllers against Open vSwitch. See INSTALL.md for details.
422 - Added IPFIX support for SCTP flows and templates for ICMPv4/v6 flows.
423 - Upon the receipt of a SIGHUP signal, ovs-vswitchd no longer reopens its
424 log file (it will terminate instead). Please use 'ovs-appctl vlog/reopen'
426 - Support for Linux kernels up to 3.14. From Kernel 3.12 onwards OVS uses
427 tunnel API for GRE and VXLAN.
428 - Added DPDK support.
429 - Added support for custom vlog patterns in Python
433 ---------------------
434 - Address prefix tracking support for flow tables. New columns
435 "prefixes" in OVS-DB table "Flow_Table" controls which packet
436 header fields are used for address prefix tracking. Prefix
437 tracking allows the classifier to skip rules with longer than
438 necessary prefixes, resulting in better wildcarding for datapath
439 flows. Default configuration is to not use any fields for prefix
440 tracking. However, if any flow tables contain both exact matches
441 and masked matches for IP address fields, OVS performance may be
442 increased by using this feature.
443 * As of now, the fields for which prefix lookup can be enabled
444 are: 'tun_id', 'tun_src', 'tun_dst', 'nw_src', 'nw_dst' (or
445 aliases 'ip_src' and 'ip_dst'), 'ipv6_src', and 'ipv6_dst'.
446 (Using this feature for 'tun_id' would only make sense if the
447 tunnel IDs have prefix structure similar to IP addresses.)
448 * There is a maximum number of fields that can be enabled for any
449 one flow table. Currently this limit is 3.
451 $ ovs-vsctl set Bridge br0 flow_tables:0=@N1 -- \
452 --id=@N1 create Flow_Table name=table0
453 $ ovs-vsctl set Bridge br0 flow_tables:1=@N1 -- \
454 --id=@N1 create Flow_Table name=table1
455 $ ovs-vsctl set Flow_Table table0 prefixes=ip_dst,ip_src
456 $ ovs-vsctl set Flow_Table table1 prefixes=[]
457 - TCP flags matching: OVS now supports matching of TCP flags. This
458 has an adverse performance impact when using OVS userspace 1.10
459 or older (no megaflows support) together with the new OVS kernel
460 module. It is recommended that the kernel and userspace modules
461 both are upgraded at the same time.
462 - The default OpenFlow and OVSDB ports will change to
463 IANA-assigned numbers in a future release. Consider updating
464 your installations to specify port numbers instead of using the
467 * The OpenFlow 1.1+ "Write-Actions" instruction is now supported.
468 * OVS limits the OpenFlow port numbers it assigns to port 32767 and
469 below, leaving port numbers above that range free for assignment
471 * ovs-vswitchd now honors changes to the "ofport_request" column
472 in the Interface table by changing the port's OpenFlow port
474 * The Open vSwitch software switch now supports OpenFlow groups.
475 - ovs-vswitchd.conf.db.5 man page will contain graphviz/dot
476 diagram only if graphviz package was installed at the build time.
477 - Support for Linux kernels up to 3.11
479 The "show" command also displays mega flow mask stats.
481 * New command "ofp-parse-pcap" to dump OpenFlow from PCAP files.
482 - ovs-controller has been renamed test-controller. It is no longer
483 packaged or installed by default, because too many users assumed
484 incorrectly that ovs-controller was a necessary or desirable part
485 of an Open vSwitch deployment.
486 - Added vlog option to export to a UDP syslog sink.
488 * The "monitor" command can now monitor all tables in a database,
489 instead of being limited to a single table.
490 - The flow-eviction-threshold has been replaced by the flow-limit which is a
491 hard limit on the number of flows in the datapath. It defaults to 200,000
492 flows. OVS automatically adjusts this number depending on network
494 - Added IPv6 support for active and passive socket communications.
498 ---------------------
499 - The ovs-vswitchd process is no longer single-threaded. Multiple
500 threads are now used to handle flow set up and asynchronous
503 * Experimental support for OpenFlow 1.1 (in addition to 1.2 and
504 1.3, which had experimental support in 1.10).
505 * Experimental protocol support for OpenFlow 1.1+ groups. This
506 does not yet include an implementation in the Open vSwitch
508 * Experimental protocol support for OpenFlow 1.2+ meters. This
509 does not yet include an implementation in the Open vSwitch
511 * New support for matching outer source and destination IP address
512 of tunneled packets, for tunnel ports configured with the newly
513 added "remote_ip=flow" and "local_ip=flow" options.
514 * Support for matching on metadata 'pkt_mark' for interacting with
515 other system components. On Linux this corresponds to the skb
517 * Support matching, rewriting SCTP ports
518 - The Interface table in the database has a new "ifindex" column to
519 report the interface's OS-assigned ifindex.
520 - New "check-oftest" Makefile target for running OFTest against Open
521 vSwitch. See README-OFTest for details.
522 - The flow eviction threshold has been moved to the Open_vSwitch table.
523 - Database names are now mandatory when specifying ovsdb-server options
524 through database paths (e.g. Private key option with the database name
525 should look like "--private-key=db:Open_vSwitch,SSL,private_key").
526 - Added ovs-dev.py, a utility script helpful for Open vSwitch developers.
527 - Support for Linux kernels up to 3.10
529 * New "ofp-parse" for printing OpenFlow messages read from a file.
530 * New commands for OpenFlow 1.1+ groups.
531 - Added configurable flow caching support to IPFIX exporter.
532 - Dropped support for Linux pre-2.6.32.
533 - Log file timestamps and ovsdb commit timestamps are now reported
534 with millisecond resolution. (Previous versions only reported
538 v1.11.0 - 28 Aug 2013
539 ---------------------
540 - Support for megaflows, which allows wildcarding in the kernel (and
541 any dpif implementation that supports wildcards). Depending on
542 the flow table and switch configuration, flow set up rates are
543 close to the Linux bridge.
544 - The "tutorial" directory contains a new tutorial for some advanced
545 Open vSwitch features.
546 - Stable bond mode has been removed.
547 - The autopath action has been removed.
548 - New support for the data encapsulation format of the LISP tunnel
549 protocol (RFC 6830). An external control plane or manual flow
550 setup is required for EID-to-RLOC mapping.
552 * The "dec_mpls_ttl" and "set_mpls_ttl" actions from OpenFlow
553 1.1 and later are now implemented.
554 * New "stack" extension for use in actions, to push and pop from
556 * The "load" and "set_field" actions can now modify the "in_port". (This
557 allows one to enable output to a flow's input port by setting the
558 in_port to some unused value, such as OFPP_NONE.)
560 * New debugging commands "add-flow", "mod-flow", "del-flow".
561 * "dump-flows" now has a -m option to increase output verbosity.
562 - In dpif-based bridges, cache action translations, which can improve
563 flow set up performance by 80% with a complicated flow table.
564 - New syslog format, prefixed with "ovs|", to be easier to filter.
565 - RHEL: Removes the default firewall rule that allowed GRE traffic to
566 pass through. Any users that relied on this automatic firewall hole
567 will have to manually configure it. The ovs-ctl(8) manpage documents
568 the "enable-protocol" command that can be used as an alternative.
569 - New CFM demand mode which uses data traffic to indicate interface
572 v1.10.0 - 01 May 2013
573 ---------------------
574 - Bridge compatibility support has been removed. Any uses that
575 rely on ovs-brcompatd will have to stick with Open vSwitch 1.9.x
576 or adapt to native Open vSwitch support (e.g. use ovs-vsctl instead
578 - The maximum size of the MAC learning table is now configurable.
579 - With the Linux datapath, packets for new flows are now queued
580 separately on a per-port basis, so it should no longer be
581 possible for a large number of new flows arriving on one port to
582 prevent new flows from being processed on other ports.
584 * Previously ovs-vsctl would retry connecting to the database forever,
585 causing it to hang if ovsdb-server was not running. Now, ovs-vsctl
586 only tries once by default (use --retry to try forever). This change
587 means that you may want to remove uses of --timeout to avoid hangs
589 * Many "ovs-vsctl" database commands now accept an --if-exists option.
590 Please refer to the ovs-vsctl manpage for details.
592 - Experimental support for newer versions of OpenFlow. See
593 the "What versions of OpenFlow does Open vSwitch support?"
594 question in the FAQ for more details.
595 - The OpenFlow "dp_desc" may now be configured by setting the
596 value of other-config:dp-desc in the Bridge table.
597 - It is possible to request the OpenFlow port number with the
598 "ofport_request" column in the Interface table.
599 - The NXM flow_removed message now reports the OpenFlow table ID
600 from which the flow was removed.
602 - New support for the VXLAN tunnel protocol (see the IETF draft here:
603 http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03).
604 - Tunneling requires the version of the kernel module paired with
605 Open vSwitch 1.9.0 or later.
606 - Inheritance of the Don't Fragment bit in IP tunnels (df_inherit)
607 is no longer supported.
608 - Path MTU discovery is no longer supported.
609 - CAPWAP tunneling support removed.
610 - Tunnels with multicast destination ports are no longer supported.
612 - The "dump-flows" and "del-flows" no longer require an argument
613 if only one datapath exists.
615 - New "vlog/disable-rate-limit" and "vlog/enable-rate-limit"
616 commands available allow control over logging rate limits.
617 - New "dpif/dump-dps", "dpif/show", and "dpif/dump-flows" command
618 that mimic the equivalent ovs-dpctl commands.
619 - The ofproto library is now responsible for assigning OpenFlow port
620 numbers. An ofproto implementation should assign them when
621 port_construct() is called.
622 - All dpif-based bridges of a particular type share a common
623 datapath called "ovs-<type>", e.g. "ovs-system". The ovs-dpctl
624 commands will now return information on that shared datapath. To
625 get the equivalent bridge-specific information, use the new
626 "ovs-appctl dpif/*" commands.
627 - Backward-incompatible changes:
628 - Earlier Open vSwitch versions treated ANY as a wildcard in flow
629 syntax. OpenFlow 1.1 adds a port named ANY, which introduces a
630 conflict. ANY was rarely used in flow syntax, so we chose to
631 retire that meaning of ANY in favor of the OpenFlow 1.1 meaning.
632 - Patch ports no longer require kernel support, so they now work
633 with FreeBSD and the kernel module built into Linux 3.3 and later.
634 - New "sample" action.
638 ------------------------
640 - Support for ipv6 set action.
641 - SKB mark matching and setting.
642 - support for Linux kernels up to 3.8
643 - FreeBSD is now a supported platform, thanks to code contributions from
644 Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
645 - ovs-bugtool: New --ovs option to report only OVS related information.
646 - New %t and %T log escapes to identify the subprogram within a
647 cooperating group of processes or threads that emitted a log message.
648 The default log patterns now include this information.
650 - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
651 fields in IPv6 neighbor discovery messages, and IPv6 flow label.
652 - Adds support for writing to the metadata field for a flow.
654 - The tunneling code no longer assumes input and output keys are
655 symmetric. If they are not, PMTUD needs to be disabled for
656 tunneling to work. Note this only applies to flow-based keys.
657 - New support for a nonstandard form of GRE that supports a 64-bit key.
658 - Tunnel Path MTU Discovery default value was set to 'disabled'.
659 This feature is deprecated and will be removed soon.
660 - Tunnel header caching removed.
662 - Commands and actions that accept port numbers now also accept keywords
663 that represent those ports (such as LOCAL, NONE, and ALL). This is
664 also the recommended way to specify these ports, for compatibility
665 with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
666 for these ports for different purposes).
668 - Support requesting the port number with the "port_no" option in
669 the "add-if" command.
670 - ovs-pki: The "online PKI" features have been removed, along with
671 the ovs-pki-cgi program that facilitated it, because of some
672 alarmist insecurity claims. We do not believe that these claims
673 are true, but because we do not know of any users for this
674 feature it seems better on balance to remove it. (The ovs-pki-cgi
675 program was not included in distribution packaging.)
676 - ovsdb-server now enforces the immutability of immutable columns. This
677 was not enforced in earlier versions due to an oversight.
678 - The following features are now deprecated. They will be removed no
679 earlier than February 2013. Please email dev@openvswitch.org with
681 - Bridge compatibility.
683 - The autopath action.
684 - Interface type "null".
685 - Numeric values for reserved ports (see "ovs-ofctl" note above).
686 - Tunnel Path MTU Discovery.
687 - CAPWAP tunnel support.
688 - The data in the RARP packets can now be matched in the same way as the
693 ------------------------
694 *** Internal only release ***
695 - New FAQ. Please send updates and additions!
696 - Authors of controllers, please read the new section titled "Action
697 Reproduction" in DESIGN, which describes an Open vSwitch change in
698 behavior in corner cases that may affect some controllers.
700 - A new test utility that can create L3 tunnel between two Open
701 vSwitches and detect connectivity issues.
703 - New --sort and --rsort options for "dump-flows" command.
704 - "mod-port" command can now control all OpenFlow config flags.
706 - Allow general bitwise masking for IPv4 and IPv6 addresses in
707 IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
709 - Allow support for arbitrary Ethernet masks. (Previously, only
710 the multicast bit in the destination address could be individually
712 - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
713 - The OFPST_QUEUE request now reports an error if a specified port or
714 queue does not exist, or for requests for a specific queue on all
715 ports, if the specified queue does not exist on any port. (Previous
716 versions generally reported an empty set of results.)
717 - New "flow monitor" feature to allow controllers to be notified of
718 flow table changes as they happen.
719 - Additional protocols are not mirrored and dropped when forward-bpdu is
720 false. For a full list, see the ovs-vswitchd.conf.db man page.
721 - Open vSwitch now sends RARP packets in situations where it previously
722 sent a custom protocol, making it consistent with behavior of QEMU and
724 - All Open vSwitch programs and log files now show timestamps in UTC,
725 instead the local timezone, by default.
729 ------------------------
730 - kernel modules are renamed. openvswitch_mod.ko is now
731 openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
732 - Increased the number of NXM registers to 8.
733 - Added ability to configure DSCP setting for manager and controller
734 connections. By default, these connections have a DSCP value of
735 Internetwork Control (0xc0).
736 - Added the granular link health statistics, 'cfm_health', to an
739 - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
740 - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
743 - Added the "dump-ports-desc" command to retrieve port
744 information using the new port description multipart messages.
746 - Added support for spawning ovs-test server from the client.
747 - Now ovs-test is able to automatically create test bridges and ports.
748 - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
749 - Tripled flow setup performance.
750 - The "coverage/log" command previously available through ovs-appctl
751 has been replaced by "coverage/show". The new command replies with
752 coverage counter values, instead of logging them.
756 ------------------------
757 - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
761 ------------------------
762 *** Internal only release ***
764 - LACP bonds no longer fall back to balance-slb when negotiations fail.
765 Instead they drop traffic.
766 - The default bond_mode changed from SLB to active-backup, to protect
767 unsuspecting users from the significant risks of SLB bonds (which are
768 documented in vswitchd/INTERNALS).
769 - Load balancing can be disabled by setting the bond-rebalance-interval
772 - Added support for bitwise matching on TCP and UDP ports.
773 See ovs-ofctl(8) for more information.
774 - NXM flow dumps now include times elapsed toward idle and hard
776 - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
777 controllers more precise control over which OpenFlow messages they
778 receive asynchronously.
779 - New "fin_timeout" action.
780 - Added "fin_timeout" support to "learn" action.
781 - New Nicira action NXAST_CONTROLLER that offers additional features
782 over output to OFPP_CONTROLLER.
783 - When QoS settings for an interface do not configure a default queue
784 (queue 0), Open vSwitch now uses a default configuration for that
785 queue, instead of dropping all packets as in previous versions.
787 - Logging to console and file will have UTC timestamp as a default for
788 all the daemons. An example of the default format is
789 2012-01-27T16:35:17Z. ovs-appctl can be used to change the default
791 - The syntax of commands and options to set log levels was simplified,
792 to make it easier to remember.
793 - New support for limiting the number of flows in an OpenFlow flow
794 table, with configurable policy for evicting flows upon
795 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
796 for more information.
797 - New "enable-async-messages" column in the Controller table. If set to
798 false, OpenFlow connections to the controller will initially have all
799 asynchronous messages disabled, overriding normal OpenFlow behavior.
800 - ofproto-provider interface:
801 - "struct rule" has a new member "used" that ofproto implementations
802 should maintain by updating with ofproto_rule_update_used().
804 - The new option --timestamp causes the "monitor" command to print
805 a timestamp with every update.
806 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
810 ------------------------
812 - Added support for querying, modifying, and deleting flows
813 based on flow cookie when using NXM.
814 - Added new NXM_PACKET_IN format.
815 - Added new NXAST_DEC_TTL action.
817 - Added daemonization support to the monitor and snoop commands.
819 - The "find" command supports new set relational operators
820 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
821 - ovsdb-tool now uses the typical database and schema installation
822 directories as defaults.
823 - The default MAC learning timeout has been increased from 60 seconds
824 to 300 seconds. The MAC learning timeout is now configurable.
828 ------------------------
829 - Compatible with Open vSwitch kernel module included in Linux 3.3.
830 - New "VLAN splinters" feature to work around buggy device drivers
831 in old Linux versions. (This feature is deprecated. When
832 broken device drivers are no longer in widespread use, we will
833 delete this feature.) See ovs-vswitchd.conf.db(5) for more
836 - Added ability to match on IPv6 flow label through NXM.
837 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
838 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
839 - Added ability to modify ECN bits in IPv4.
840 - Added ability to modify TTL in IPv4.
842 - Don't require the "normal" action to use mirrors. Traffic will
843 now be properly mirrored for any flows, regardless of their
845 - Track packet and byte statistics sent on mirrors.
846 - The sFlow implementation can now usually infer the correct agent
847 device instead of having to be told explicitly.
849 - New "fdb/flush" command to flush bridge's MAC learning table.
851 - A new distributed testing tool that allows one to diagnose performance
852 and connectivity issues. This tool currently is not included in RH or
854 - RHEL packaging now supports integration with Red Hat network scripts.
856 - Post 1.4.*, OVS will be changing the default bond mode from balance-slb
857 to active-backup. SLB bonds carry significant risks with them
858 (documented vswitchd/INTERNALS) which we want to prevent unsuspecting
859 users from running into. Users are advised to update any scripts or
860 configuration which may be negatively impacted by explicitly setting
861 the bond mode which they want to use.
865 ------------------------
867 - Added an OpenFlow extension which allows the "output" action to accept
869 - Added an OpenFlow extension for flexible learning.
870 - Bumped number of NXM registers from four to five.
872 - New "version" command to determine version of running daemon.
873 - If no argument is provided for "cfm/show", displays detailed
874 information about all interfaces with CFM enabled.
875 - If no argument is provided for "lacp/show", displays detailed
876 information about all ports with LACP enabled.
878 - New "set-if" command to modify a datapath port's configuration.
880 - The software switch now supports 255 OpenFlow tables, instead
881 of just one. By default, only table 0 is consulted, but the
882 new NXAST_RESUBMIT_TABLE action can look up in additional
883 tables. Tables 128 and above are reserved for use by the
884 switch itself; please use only tables 0 through 127.
885 - Add support for 802.1D spanning tree (STP).
886 - Fragment handling extensions:
887 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
888 fields are made available for matching in fragments with
890 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
891 via "ip_frag" in ovs-ofctl).
892 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
893 fragment handling policy.
894 - CAPWAP tunneling now supports an extension to transport a 64-bit key.
895 By default it remains compatible with the old version and other
896 standards-based implementations.
897 - Flow setups are now processed in a round-robin manner across ports
898 to prevent any single client from monopolizing the CPU and conducting
899 a denial of service attack.
900 - Added support for native VLAN tagging. A new "vlan_mode"
901 parameter can be set for "port". Possible values: "access",
902 "trunk", "native-tagged" and "native-untagged".
903 - test-openflowd has been removed. Please use ovs-vswitchd instead.
906 ------------------------
907 - New "ofproto" abstraction layer to ease porting to hardware
909 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
910 - Datapath support for Linux kernels up to 3.0.
912 - New "bundle" and "bundle_load" action extensions.
914 - Implement table unique constraints.
915 - Support cooperative locking between callers.
917 - New "-s" option for "show" command prints packet and byte
918 counters for each port.
920 - New "--readd" option for "replace-flows".
922 - New "show" command to print an overview of configuration.
923 - New "comment" command to add remark that explains intentions.
924 - ovs-brcompatd has been rewritten to fix long-standing bugs.
925 - ovs-openflowd has been renamed test-openflowd and moved into the
926 tests directory. Its presence confused too many users. Please
927 use ovs-vswitchd instead.
928 - New ovs-benchmark utility to test flow setup performance.
929 - A new log level "off" has been added. Configuring a log facility
930 "off" prevents any messages from being logged to it. Previously,
931 "emer" was effectively "off" because no messages were ever logged at
932 level "emer". Now, errors that cause a process to exit are logged
934 - "configure" option --with-l26 has been renamed --with-linux, and
935 --with-l26-source has been renamed --with-linux-source. The old
936 names will be removed after the next release, so please update
938 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
939 datapath/linux-2.6/compat-2.6 directories.
941 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
942 Please use the extensible match extensions instead.
943 - Removed the Maintenance_Point and Monitor tables in an effort
944 to simplify 802.1ag configuration.
945 - Performance and scalability improvements
949 ------------------------
950 - Ability to define policies over IPv6
953 - Support for extensible match extensions to OpenFlow
955 - Support for HFSC qdisc.
956 - Queue used by in-band control can now be configured.
958 - Kernel<->userspace interface has been reworked and should be
959 close to a stable ABI now.
960 - "Port group" concept has been dropped.
961 - GRE over IPSEC tunnels
963 - New active backup bonding mode.
964 - New L4 hashing support when LACP is enabled.
965 - Source MAC hash now includes VLAN field also.
967 - Greatly improved handling of large flow tables
969 - "show" command now prints full vport configuration.
970 - "dump-groups" command removed since kernel support for
971 port groups was dropped.
973 - New commands for working with the new Managers table.
974 - "list" command enhanced with new formatting options and --columns
976 - "get" command now accepts new --id option.
977 - New "find" command.
979 - New "queue-stats" command for printing queue stats.
980 - New commands "replace-flows" and "diff-flows".
981 - Commands to add and remove flows can now read from files.
982 - New --flow-format option to enable or disable NXM.
983 - New --more option to increase OpenFlow message verbosity.
984 - Removed "tun-cookie" command, which is no longer useful.
985 - ovs-controller enhancements for testing various features.
986 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
987 bugs. New ovs-vlan-bug-workaround command for enabling and
988 disabling a workaround for these driver bugs.
990 - "Resubmit" actions now update flow statistics.
991 - New "register" extension for use in matching and actions, via NXM.
992 - New "multipath" experimental action extension.
993 - New support for matching multicast Ethernet frames, via NXM.
994 - New extension for OpenFlow vendor error codes.
995 - New extension to set the QoS output queue without actually
996 sending to an output port.
997 - Open vSwitch now reports a single flow table, instead of
998 separate hash and wildcard tables. This better models the
999 current implementation.
1000 - New experimental "note" action.
1001 - New "ofproto/trace" ovs-appctl command and associated utilities
1002 to ease debugging complex flow tables.
1004 - Schema documentation now includes an entity-relationship diagram.
1005 - The database is now garbage collected. In most tables,
1006 unreferenced rows will be deleted automatically.
1007 - Many tables now include statistics updated periodically by
1008 ovs-vswitchd or ovsdb-server.
1009 - Every table now has an "external-ids" column for use by OVS
1011 - There is no default controller anymore. Each bridge must have its
1012 controller individually specified.
1013 - The "fail-mode" is now a property of a Bridge instead of a Controller.
1014 - New versioning and checksum features.
1015 - New Managers table and manager_options column in Open_vSwitch table
1016 for specifying managers. The old "managers" column in the
1017 Open_vSwitch table has been removed.
1018 - Many "name" columns are now immutable.
1020 - Dropped support for XenServer pre-5.6.100.
1021 - Dropped support for Linux pre-2.6.18.
1022 - Dropped controller discovery support.
1023 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
1024 Statistics reporting in the database is a rough equivalent.
1025 - Dropped the "corekeeper" package (now separate, at
1026 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
1027 - Performance and scalability improvements
1030 v1.1.0pre2 - 13 Sep 2010
1031 ------------------------
1034 v1.1.0pre1 - 31 Aug 2010
1035 ------------------------
1036 - OpenFlow 1.0 slicing (QoS) functionality
1037 - Python bindings for configuration database (no write support)
1038 - Performance and scalability improvements
1041 v1.0.1 - 31 May 2010
1042 --------------------
1043 - New "patch" interface type
1046 v1.0.0 - 15 May 2010
1047 --------------------
1048 - Configuration database with remote management
1051 - Support for XenServer 5.5 and 5.6
1052 - Performance and scalability improvements
1055 v0.99.2 - 18 Feb 2010
1056 ---------------------
1059 v0.99.1 - 25 Jan 2010
1060 ---------------------
1061 - Add support for sFlow(R)
1062 - Make headers compatible with C++
1065 v0.99.0 - 14 Jan 2010
1066 ---------------------
1067 - User-space forwarding engine
1070 v0.90.7 - 29 Nov 2009
1071 ---------------------
1072 - Add support for NetFlow active timeouts
1075 v0.90.6 - 6 Oct 2009
1076 --------------------
1079 v0.90.5 - 21 Sep 2009
1080 ---------------------
1081 - Generalize in-band control to more diverse network setups
projects / mirror_ovs.git / blob