4 * Added support to set packet mark for tunnel endpoint using
5 `egress_pkt_mark` OVSDB option.
9 - Utilities and daemons that support SSL now allow protocols and
10 ciphers to be configured with --ssl-protocols and --ssl-ciphers.
12 * QoS is now implemented via egress shaping rather than ingress policing.
13 * DSCP marking is now supported, via the new northbound QoS table.
14 * IPAM now supports fixed MAC addresses.
15 * Support for source IP address based routing.
17 - New --ovs option to also print OpenFlow flows.
18 - put_dhcp_opts and put_dhcp_optsv6 actions may now be traced.
19 * Support for managing SSL and remote connection configuration in
20 northbound and southbound databases.
21 * TCP connections to northbound and southbound databases are no
22 longer enabled by default and must be explicitly configured.
23 See documentation for ovn-sbctl/ovn-nbctl "set-connection"
24 command or the ovn-ctl "--db-sb-create-insecure-remote" and
25 "--db-nb-create-insecure-remote" command-line options for
26 information regarding remote connection configuration.
27 * New appctl "inject-pkt" command in ovn-controller that allows
28 packets to be injected into the connected OVS instance.
29 * Distributed logical routers may now be connected directly to
30 logical switches with localnet ports, by specifying a
31 "redirect-chassis" on the distributed gateway port of the
32 logical router. NAT rules may be specified directly on the
33 distributed logical router, and are handled either centrally on
34 the "redirect-chassis", or in many cases are handled locally on
35 the hypervisor where the corresponding logical port resides.
36 Gratuitous ARP for NAT addresses on a distributed logical
37 router is not yet supported, but will be added in a future
39 - Fixed regression in table stats maintenance introduced in OVS
40 2.3.0, wherein the number of OpenFlow table hits and misses was
43 * OFPT_PACKET_OUT messages are now supported in bundles.
44 * A new "selection_method=dp_hash" type for OpenFlow select group
45 bucket selection that uses the datapath computed 5-tuple hash
46 without making datapath flows match the 5-tuple fields, which
47 is useful for more efficient load balancing, for example. This
48 uses the Netronome extension to OpenFlow 1.5+ that allows
49 control over the OpenFlow select groups selection method. See
50 "selection_method" and related options in ovs-ofctl(8) for
52 * The "sample" action now supports "ingress" and "egress" options.
53 * The "ct" action now supports the TFTP ALG where support is available.
54 * New actions "clone" and "ct_clear".
56 * 'bundle' command now supports packet-out messages.
57 * New syntax for 'ovs-ofctl packet-out' command, which uses the
58 same string parser as the 'bundle' command. The old 'packet-out'
59 syntax is deprecated and will be removed in a later OVS
61 * New unixctl "ofctl/packet-out" command, which can be used to
62 instruct a flow monitor to issue OpenFlow packet-out messages.
64 * Remote connections can now be made read-only (see ovsdb-server(1)).
66 * TLV mappings for protocols such as Geneve are now segregated on
67 a per-OpenFlow bridge basis rather than globally. (The interface
69 * Removed support for IPsec tunnels.
71 * New option 'n_rxq_desc' and 'n_txq_desc' fields for DPDK interfaces
72 which set the number of rx and tx descriptors to use for the given port.
73 * Support for DPDK v16.11.
74 * Support for rx checksum offload. Refer DPDK HOWTO for details.
75 * Port Hotplug is now supported.
76 * DPDK physical ports can now have arbitrary names. The PCI address of
77 the device must be set using the 'dpdk-devargs' option. Compatibility
78 with the old dpdk<portid> naming scheme is broken, and as such a
79 device will not be available for use until a valid dpdk-devargs is
81 * Virtual DPDK Poll Mode Driver (vdev PMD) support.
82 * Removed experimental tag.
84 * A package upgrade does not automatically restart OVS service.
85 - ovs-vswitchd/ovs-vsctl:
86 * Ports now have a "protected" flag. Protected ports can not forward
87 frames to other protected ports. Unprotected ports can receive and
88 forward frames to protected and other unprotected ports.
89 - ovs-vsctl, ovn-nbctl, ovn-sbctl, vtep-ctl:
90 * Database commands now accept integer ranges, e.g. "set port
91 eth0 trunks=1-10" to enable trunking VLANs 1 to 10.
95 - First supported release of OVN. See ovn-architecture(7) for more
98 * New "monitor_cond" "monitor_cond_update" and "update2" extensions to
101 * OpenFlow 1.3+ bundles now expire after 10 seconds since the
102 last time the bundle was either opened, modified, or closed.
103 * OpenFlow 1.3 Extension 230, adding OpenFlow Bundles support, is
105 * OpenFlow 1.3+ bundles are now supported for group mods as well as
106 flow mods and port mods. Both 'atomic' and 'ordered' bundle
107 flags are supported for group mods as well as flow mods.
108 * Internal OpenFlow rule representation for load and set-field
109 actions is now much more memory efficient. For a complex flow
110 table this can reduce rule memory consumption by 40%.
111 * Bundles are now much more memory efficient than in OVS 2.5.
112 Together with memory efficiency improvements in OpenFlow rule
113 representation, the peak OVS resident memory use during a
114 bundle commit for large complex set of flow mods can be only
115 25% of that in OVS 2.5 (4x lower).
116 * OpenFlow 1.1+ OFPT_QUEUE_GET_CONFIG_REQUEST now supports OFPP_ANY.
117 * OpenFlow 1.4+ OFPMP_QUEUE_DESC is now supported.
118 * OpenFlow 1.4+ OFPT_TABLE_STATUS is now supported.
119 * New property-based packet-in message format NXT_PACKET_IN2 with support
120 for arbitrary user-provided data and for serializing flow table
121 traversal into a continuation for later resumption.
122 * New extension message NXT_SET_ASYNC_CONFIG2 to allow OpenFlow 1.4-like
123 control over asynchronous messages in earlier versions of OpenFlow.
124 * New OpenFlow extension NXM_NX_MPLS_TTL to provide access to MPLS TTL.
125 * New output option, output(port=N,max_len=M), to allow truncating a
126 packet to size M bytes when outputting to port N.
127 * New command OFPGC_ADD_OR_MOD for OFPT_GROUP_MOD message that adds a
128 new group or modifies an existing groups
129 * The optional OpenFlow packet buffering feature is deprecated in
130 this release, and will be removed in the next OVS release
131 (2.7). After the change OVS always sends the 'buffer_id' as
132 0xffffffff in packet-in messages and will send an error
133 response if any other value of this field is included in
134 packet-out and flow mod sent by a controller. Controllers are
135 already expected to work properly in cases where the switch can
136 not buffer packets, so this change should not affect existing
138 * New OpenFlow extension NXT_CT_FLUSH_ZONE to flush conntrack zones.
139 - Improved OpenFlow version compatibility for actions:
140 * New OpenFlow extension to support the "group" action in OpenFlow 1.0.
141 * OpenFlow 1.0 "enqueue" action now properly translated to OpenFlow 1.1+.
142 * OpenFlow 1.1 "mod_nw_ecn" and OpenFlow 1.1+ "mod_nw_ttl" actions now
143 properly translated to OpenFlow 1.0.
145 * queue-get-config command now allows a queue ID to be specified.
146 * '--bundle' option can now be used with OpenFlow 1.3 and with group mods.
147 * New "bundle" command allows executing a mixture of flow and group mods
148 as a single atomic transaction.
149 * New option "--color" to produce colorized output for some commands.
150 * New option '--may-create' to use OFPGC_ADD_OR_MOD in mod-group command.
152 * New "sampling_port" option for "sample" action to allow sampling
153 ingress and egress tunnel metadata with IPFIX.
154 * New ovs-ofctl commands "dump-ipfix-bridge" and "dump-ipfix-flow" to
155 dump bridge IPFIX statistics and flow based IPFIX statistics.
156 * New setting other-config:virtual_obs_id to add an arbitrary string
159 * OVS Linux datapath now implements Conntrack NAT action with all
160 supported Linux kernels.
161 * Support for truncate action.
162 * New QoS type "linux-noop" that prevents Open vSwitch from trying to
163 manage QoS for a given port (useful when other software manages QoS).
165 * New option "n_rxq" for PMD interfaces.
166 Old 'other_config:n-dpdk-rxqs' is no longer supported.
167 Not supported by vHost interfaces. For them number of rx and tx queues
168 is applied from connected virtio device.
169 * New 'other_config:pmd-rxq-affinity' field for PMD interfaces, that
170 allows to pin port's rx queues to desired cores.
171 * New appctl command 'dpif-netdev/pmd-rxq-show' to check the port/rxq
173 * Type of log messages from PMD threads changed from INFO to DBG.
174 * QoS functionality with sample egress-policer implementation.
175 * The mechanism for configuring DPDK has changed to use database
176 * Sensible defaults have been introduced for many of the required
177 configuration options
178 * DB entries have been added for many of the DPDK EAL command line
179 arguments. Additional arguments can be passed via the dpdk-extra
181 * Add ingress policing functionality.
182 * PMD threads servicing vHost User ports can now come from the NUMA
183 node that device memory is located on if CONFIG_RTE_LIBRTE_VHOST_NUMA
185 * Basic connection tracking for the userspace datapath (no ALG,
186 fragmentation or NAT support yet)
187 * Support for DPDK 16.07
188 * Optional support for DPDK pdump enabled.
189 * Jumbo frame support
190 * Remove dpdkvhostcuse port type.
191 * OVS client mode for vHost and vHost reconnect (Requires QEMU 2.7)
192 * 'dpdkvhostuserclient' port type.
193 - Increase number of registers to 16.
194 - ovs-benchmark: This utility has been removed due to lack of use and
197 * New "vlog/close" command.
199 * Added the ability to selectively start the forwarding and database
200 functions (ovs-vswitchd and ovsdb-server, respectively).
202 * Remove max number of sessions limit, to enable connection scaling
205 * Added support for Python 3.4+ in addition to existing support
208 * Introduced SELinux policy package.
209 - Datapath Linux kernel compatibility.
210 * Dropped support for kernel older than 3.10.
211 * Removed VLAN splinters feature.
212 * Datapath supports kernel upto 4.7.
214 * Flow based tunnel match and action can be used for IPv6 address using
215 tun_ipv6_src, tun_ipv6_dst fields.
216 * Added support for IPv6 tunnels, for details checkout FAQ.
217 * Deprecated support for IPsec tunnels ports.
218 - A wrapper script, 'ovs-tcpdump', to easily port-mirror an OVS port and
220 - Introduce --no-self-confinement flag that allows daemons to work with
221 sockets outside their run directory.
222 - ovs-pki: Changed message digest algorithm from SHA-1 to SHA-512 because
223 SHA-1 is no longer secure and some operating systems have started to
224 disable it in OpenSSL.
225 - Add 'mtu_request' column to the Interface table. It can be used to
226 configure the MTU of the ports.
229 - Using openvswitch module in conjunction with upstream Linux tunnels:
230 * When using the openvswitch module distributed with OVS against kernel
231 versions 4.4 to 4.6, the openvswitch module cannot be loaded or used at
232 the same time as "ip_gre".
233 - Conntrack FTP ALGs: When using the openvswitch module distributed with
234 OVS, particular Linux distribution kernels versions may provide diminished
235 functionality. This typically affects active FTP data connections when
236 using "actions=ct(alg=ftp),..." in flow tables. Specifically:
237 * Centos 7.1 kernels (3.10.0-2xx) kernels are unable to correctly set
238 up expectations for FTP data connections in multiple zones,
239 eg "actions=ct(zone=1,alg=ftp),ct(zone=2,alg=ftp),...". Executing the
240 "ct" action for subsequent data connections may fail to determine that
241 the data connection is "related" to an existing connection.
242 * Centos 7.2 kernels (3.10.0-3xx) kernels may not establish FTP ALG state
243 correctly for NATed connections. As a result, flows that perform NAT,
244 eg "actions=ct(nat,ftp=alg,table=1),..." may fail to NAT the packet,
245 and will populate the "ct_state=inv" bit in the flow.
249 ---------------------
250 - Dropped support for Python older than version 2.7. As a consequence,
251 using Open vSwitch 2.5 or later on XenServer 6.5 or earlier (which
252 have Python 2.4) requires first installing Python 2.7.
254 * Group chaining (where one OpenFlow group triggers another) is
256 * OpenFlow 1.4+ "importance" is now considered for flow eviction.
257 * OpenFlow 1.4+ OFPTC_EVICTION is now implemented.
258 * OpenFlow 1.4+ OFPTC_VACANCY_EVENTS is now implemented.
259 * OpenFlow 1.4+ OFPMP_TABLE_DESC is now implemented.
260 * Allow modifying the ICMPv4/ICMPv6 type and code fields.
261 * OpenFlow 1.4+ OFPT_SET_ASYNC_CONFIG and OFPT_GET_ASYNC_CONFIG are
264 * New "out_group" keyword for OpenFlow 1.1+ matching on output group.
266 * Geneve tunnels can now match and set options and the OAM bit.
267 * The nonstandard GRE64 tunnel extension has been dropped.
268 - Support Multicast Listener Discovery (MLDv1 and MLDv2).
269 - Add 'symmetric_l3l4' and 'symmetric_l3l4+udp' hash functions.
270 - sFlow agent now reports tunnel and MPLS structures.
271 - New 'check-system-userspace', 'check-kmod' and 'check-kernel' Makefile
272 targets to run a new system testsuite. These tests can be run inside
273 a Vagrant box. See INSTALL.md for details
274 - Mark --syslog-target argument as deprecated. It will be removed in
275 the next OVS release.
276 - Added --user option to all daemons
277 - Add support for connection tracking through the new "ct" action
278 and "ct_state"/"ct_zone"/"ct_mark"/"ct_label" match fields. Only
279 available on Linux kernels with the connection tracking module loaded.
280 - Add experimental version of OVN. OVN, the Open Virtual Network, is a
281 system to support virtual network abstraction. OVN complements the
282 existing capabilities of OVS to add native support for virtual network
283 abstractions, such as virtual L2 and L3 overlays and security groups.
285 * DPDK ports may now be created via network scripts (see README.RHEL).
288 * Added multiqueue support to vhost-user
289 * Note: QEMU 2.5+ required for multiqueue support
292 ---------------------
293 - Flow table modifications are now atomic, meaning that each packet
294 now sees a coherent version of the OpenFlow pipeline. For
295 example, if a controller removes all flows with a single OpenFlow
296 "flow_mod", no packet sees an intermediate version of the OpenFlow
297 pipeline where only some of the flows have been deleted.
298 - Added support for SFQ, FQ_CoDel and CoDel qdiscs.
299 - Add bash command-line completion support for ovs-vsctl Please check
300 utilities/ovs-command-compgen.INSTALL.md for how to use.
301 - The MAC learning feature now includes per-port fairness to mitigate
302 MAC flooding attacks.
303 - New support for a "conjunctive match" OpenFlow extension, which
304 allows constructing OpenFlow matches of the form "field1 in
305 {a,b,c...} AND field2 in {d,e,f...}" and generalizations. For details,
306 see documentation for the "conjunction" action in ovs-ofctl(8).
307 - Add bash command-line completion support for ovs-appctl/ovs-dpctl/
308 ovs-ofctl/ovsdb-tool commands. Please check
309 utilities/ovs-command-compgen.INSTALL.md for how to use.
310 - The "learn" action supports a new flag "delete_learned" that causes
311 the learned flows to be deleted when the flow with the "learn" action
313 - Basic support for the Geneve tunneling protocol. It is not yet
314 possible to generate or match options. This is planned for a future
315 release. The protocol is documented at
316 http://tools.ietf.org/html/draft-gross-geneve-00
317 - The OVS database now reports controller rate limiting statistics.
318 - sflow now exports information about LACP-based bonds, port names, and
319 OpenFlow port numbers, as well as datapath performance counters.
320 - ovs-dpctl functionality is now available for datapaths integrated
321 into ovs-vswitchd, via ovs-appctl. Some existing ovs-appctl
322 commands are now redundant and will be removed in a future
323 release. See ovs-vswitchd(8) for details.
325 * OpenFlow 1.4 bundles are now supported for flow mods and port
326 mods. For flow mods, both 'atomic' and 'ordered' bundle flags
327 are trivially supported, as all bundled messages are executed
328 in the order they were added and all flow table modifications
329 are now atomic to the datapath. Port mods may not appear in
330 atomic bundles, as port status modifications are not atomic.
331 * IPv6 flow label and neighbor discovery fields are now modifiable.
332 * OpenFlow 1.5 extended registers are now supported.
333 * The OpenFlow 1.5 actset_output field is now supported.
334 * OpenFlow 1.5 Copy-Field action is now supported.
335 * OpenFlow 1.5 masked Set-Field action is now supported.
336 * OpenFlow 1.3+ table features requests are now supported (read-only).
337 * Nicira extension "move" actions may now be included in action sets.
338 * "resubmit" actions may now be included in action sets. The resubmit
339 is executed last, and only if the action set has no "output" or "group"
341 * OpenFlow 1.4+ flow "importance" is now maintained in the flow table.
342 * A new Netronome extension to OpenFlow 1.5+ allows control over the
343 fields hashed for OpenFlow select groups. See "selection_method" and
344 related options in ovs-ofctl(8) for details.
345 - ovs-ofctl has a new '--bundle' option that makes the flow mod commands
346 ('add-flow', 'add-flows', 'mod-flows', 'del-flows', and 'replace-flows')
347 use an OpenFlow 1.4 bundle to operate the modifications as a single
348 atomic transaction. If any of the flow mods in a transaction fail, none
349 of them are executed. All flow mods in a bundle appear to datapath
350 lookups simultaneously.
351 - ovs-ofctl 'add-flow' and 'add-flows' commands now accept arbitrary flow
352 mods as an input by allowing the flow specification to start with an
353 explicit 'add', 'modify', 'modify_strict', 'delete', or 'delete_strict'
354 keyword. A missing keyword is treated as 'add', so this is fully
355 backwards compatible. With the new '--bundle' option all the flow mods
356 are executed as a single atomic transaction using an OpenFlow 1.4 bundle.
357 - ovs-pki: Changed message digest algorithm from MD5 to SHA-1 because
358 MD5 is no longer secure and some operating systems have started to disable
360 - ovsdb-server: New OVSDB protocol extension allows inequality tests on
361 "optional scalar" columns. See ovsdb-server(1) for details.
362 - ovs-vsctl now permits immutable columns in a new row to be modified in
363 the same transaction that creates the row.
364 - test-controller has been renamed ovs-testcontroller at request of users
365 who find it useful for testing basic OpenFlow setups. It is still not
366 a necessary or desirable part of most Open vSwitch deployments.
367 - Support for travis-ci.org based continuous integration builds has been
368 added. Build failures are reported to build@openvswitch.org. See INSTALL.md
369 file for additional details.
370 - Support for the Rapid Spanning Tree Protocol (IEEE 802.1D-2004).
371 The implementation has been tested successfully against the Ixia Automated
372 Network Validation Library (ANVL).
373 - Stats are no longer updated on fake bond interface.
374 - Keep active bond slave selection across OVS restart.
375 - A simple wrapper script, 'ovs-docker', to integrate OVS with Docker
376 containers. If and when there is a native integration of Open vSwitch
377 with Docker, the wrapper script will be retired.
378 - Added support for DPDK Tunneling. VXLAN, GRE, and Geneve are supported
379 protocols. This is generic tunneling mechanism for userspace datapath.
380 - Support for multicast snooping (IGMPv1, IGMPv2 and IGMPv3)
381 - Support for Linux kernels up to 4.0.x
382 - The documentation now use the term 'destination' to mean one of syslog,
383 console or file for vlog logging instead of the previously used term
385 - Support for VXLAN Group Policy extension
386 - Initial support for the IETF Auto-Attach SPBM draft standard. This
387 contains rudimentary support for the LLDP protocol as needed for
389 - The default OpenFlow and OVSDB ports are now the IANA-assigned
390 numbers. OpenFlow is 6653 and OVSDB is 6640.
391 - Support for DPDK vHost.
392 - Support for outer UDP checksums in Geneve and VXLAN.
393 - The kernel vports with dependencies are no longer part of the overall
394 openvswitch.ko but built and loaded automatically as individual kernel
395 modules (vport-*.ko).
396 - Support for STT tunneling.
397 - ovs-sim: New developer tool for simulating multiple OVS instances.
398 See ovs-sim(1) for more information.
399 - Support to configure method (--syslog-method argument) that determines
400 how daemons will talk with syslog.
401 - Support for "ovs-appctl vlog/list-pattern" command that lets to query
402 logging message format for each destination.
406 ---------------------
407 - OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in
409 - Linux kernel datapath now has an exact match cache optimizing the
410 flow matching process.
411 - Datapath flows now have partially wildcarded tranport port field
412 matches. This reduces userspace upcalls, but increases the
413 number of different masks in the datapath. The kernel datapath
414 exact match cache removes the overhead of matching the incoming
415 packets with the larger number of masks, but when paired with an
416 older kernel module, some workloads may perform worse with the
418 - Compatibility with autoconf 2.63 (previously >=2.64)
420 v2.2.0 - Internal Release
421 ---------------------
422 - Internal ports are no longer brought up by default, because it
423 should be an administrator task to bring up devices as they are
425 - ovs-vsctl now reports when ovs-vswitchd fails to create a new port or
427 - Port creation and configuration errors are now stored in a new error
428 column of the Interface table and included in 'ovs-vsctl show'.
429 - The "ovsdbmonitor" graphical tool has been removed, because it was
430 poorly maintained and not widely used.
431 - New "check-ryu" Makefile target for running Ryu tests for OpenFlow
432 controllers against Open vSwitch. See INSTALL.md for details.
433 - Added IPFIX support for SCTP flows and templates for ICMPv4/v6 flows.
434 - Upon the receipt of a SIGHUP signal, ovs-vswitchd no longer reopens its
435 log file (it will terminate instead). Please use 'ovs-appctl vlog/reopen'
437 - Support for Linux kernels up to 3.14. From Kernel 3.12 onwards OVS uses
438 tunnel API for GRE and VXLAN.
439 - Added DPDK support.
440 - Added support for custom vlog patterns in Python
444 ---------------------
445 - Address prefix tracking support for flow tables. New columns
446 "prefixes" in OVS-DB table "Flow_Table" controls which packet
447 header fields are used for address prefix tracking. Prefix
448 tracking allows the classifier to skip rules with longer than
449 necessary prefixes, resulting in better wildcarding for datapath
450 flows. Default configuration is to not use any fields for prefix
451 tracking. However, if any flow tables contain both exact matches
452 and masked matches for IP address fields, OVS performance may be
453 increased by using this feature.
454 * As of now, the fields for which prefix lookup can be enabled
455 are: 'tun_id', 'tun_src', 'tun_dst', 'nw_src', 'nw_dst' (or
456 aliases 'ip_src' and 'ip_dst'), 'ipv6_src', and 'ipv6_dst'.
457 (Using this feature for 'tun_id' would only make sense if the
458 tunnel IDs have prefix structure similar to IP addresses.)
459 * There is a maximum number of fields that can be enabled for any
460 one flow table. Currently this limit is 3.
462 $ ovs-vsctl set Bridge br0 flow_tables:0=@N1 -- \
463 --id=@N1 create Flow_Table name=table0
464 $ ovs-vsctl set Bridge br0 flow_tables:1=@N1 -- \
465 --id=@N1 create Flow_Table name=table1
466 $ ovs-vsctl set Flow_Table table0 prefixes=ip_dst,ip_src
467 $ ovs-vsctl set Flow_Table table1 prefixes=[]
468 - TCP flags matching: OVS now supports matching of TCP flags. This
469 has an adverse performance impact when using OVS userspace 1.10
470 or older (no megaflows support) together with the new OVS kernel
471 module. It is recommended that the kernel and userspace modules
472 both are upgraded at the same time.
473 - The default OpenFlow and OVSDB ports will change to
474 IANA-assigned numbers in a future release. Consider updating
475 your installations to specify port numbers instead of using the
478 * The OpenFlow 1.1+ "Write-Actions" instruction is now supported.
479 * OVS limits the OpenFlow port numbers it assigns to port 32767 and
480 below, leaving port numbers above that range free for assignment
482 * ovs-vswitchd now honors changes to the "ofport_request" column
483 in the Interface table by changing the port's OpenFlow port
485 * The Open vSwitch software switch now supports OpenFlow groups.
486 - ovs-vswitchd.conf.db.5 man page will contain graphviz/dot
487 diagram only if graphviz package was installed at the build time.
488 - Support for Linux kernels up to 3.11
490 The "show" command also displays mega flow mask stats.
492 * New command "ofp-parse-pcap" to dump OpenFlow from PCAP files.
493 - ovs-controller has been renamed test-controller. It is no longer
494 packaged or installed by default, because too many users assumed
495 incorrectly that ovs-controller was a necessary or desirable part
496 of an Open vSwitch deployment.
497 - Added vlog option to export to a UDP syslog sink.
499 * The "monitor" command can now monitor all tables in a database,
500 instead of being limited to a single table.
501 - The flow-eviction-threshold has been replaced by the flow-limit which is a
502 hard limit on the number of flows in the datapath. It defaults to 200,000
503 flows. OVS automatically adjusts this number depending on network
505 - Added IPv6 support for active and passive socket communications.
509 ---------------------
510 - The ovs-vswitchd process is no longer single-threaded. Multiple
511 threads are now used to handle flow set up and asynchronous
514 * Experimental support for OpenFlow 1.1 (in addition to 1.2 and
515 1.3, which had experimental support in 1.10).
516 * Experimental protocol support for OpenFlow 1.1+ groups. This
517 does not yet include an implementation in the Open vSwitch
519 * Experimental protocol support for OpenFlow 1.2+ meters. This
520 does not yet include an implementation in the Open vSwitch
522 * New support for matching outer source and destination IP address
523 of tunneled packets, for tunnel ports configured with the newly
524 added "remote_ip=flow" and "local_ip=flow" options.
525 * Support for matching on metadata 'pkt_mark' for interacting with
526 other system components. On Linux this corresponds to the skb
528 * Support matching, rewriting SCTP ports
529 - The Interface table in the database has a new "ifindex" column to
530 report the interface's OS-assigned ifindex.
531 - New "check-oftest" Makefile target for running OFTest against Open
532 vSwitch. See README-OFTest for details.
533 - The flow eviction threshold has been moved to the Open_vSwitch table.
534 - Database names are now mandatory when specifying ovsdb-server options
535 through database paths (e.g. Private key option with the database name
536 should look like "--private-key=db:Open_vSwitch,SSL,private_key").
537 - Added ovs-dev.py, a utility script helpful for Open vSwitch developers.
538 - Support for Linux kernels up to 3.10
540 * New "ofp-parse" for printing OpenFlow messages read from a file.
541 * New commands for OpenFlow 1.1+ groups.
542 - Added configurable flow caching support to IPFIX exporter.
543 - Dropped support for Linux pre-2.6.32.
544 - Log file timestamps and ovsdb commit timestamps are now reported
545 with millisecond resolution. (Previous versions only reported
549 v1.11.0 - 28 Aug 2013
550 ---------------------
551 - Support for megaflows, which allows wildcarding in the kernel (and
552 any dpif implementation that supports wildcards). Depending on
553 the flow table and switch configuration, flow set up rates are
554 close to the Linux bridge.
555 - The "tutorial" directory contains a new tutorial for some advanced
556 Open vSwitch features.
557 - Stable bond mode has been removed.
558 - The autopath action has been removed.
559 - New support for the data encapsulation format of the LISP tunnel
560 protocol (RFC 6830). An external control plane or manual flow
561 setup is required for EID-to-RLOC mapping.
563 * The "dec_mpls_ttl" and "set_mpls_ttl" actions from OpenFlow
564 1.1 and later are now implemented.
565 * New "stack" extension for use in actions, to push and pop from
567 * The "load" and "set_field" actions can now modify the "in_port". (This
568 allows one to enable output to a flow's input port by setting the
569 in_port to some unused value, such as OFPP_NONE.)
571 * New debugging commands "add-flow", "mod-flow", "del-flow".
572 * "dump-flows" now has a -m option to increase output verbosity.
573 - In dpif-based bridges, cache action translations, which can improve
574 flow set up performance by 80% with a complicated flow table.
575 - New syslog format, prefixed with "ovs|", to be easier to filter.
576 - RHEL: Removes the default firewall rule that allowed GRE traffic to
577 pass through. Any users that relied on this automatic firewall hole
578 will have to manually configure it. The ovs-ctl(8) manpage documents
579 the "enable-protocol" command that can be used as an alternative.
580 - New CFM demand mode which uses data traffic to indicate interface
583 v1.10.0 - 01 May 2013
584 ---------------------
585 - Bridge compatibility support has been removed. Any uses that
586 rely on ovs-brcompatd will have to stick with Open vSwitch 1.9.x
587 or adapt to native Open vSwitch support (e.g. use ovs-vsctl instead
589 - The maximum size of the MAC learning table is now configurable.
590 - With the Linux datapath, packets for new flows are now queued
591 separately on a per-port basis, so it should no longer be
592 possible for a large number of new flows arriving on one port to
593 prevent new flows from being processed on other ports.
595 * Previously ovs-vsctl would retry connecting to the database forever,
596 causing it to hang if ovsdb-server was not running. Now, ovs-vsctl
597 only tries once by default (use --retry to try forever). This change
598 means that you may want to remove uses of --timeout to avoid hangs
600 * Many "ovs-vsctl" database commands now accept an --if-exists option.
601 Please refer to the ovs-vsctl manpage for details.
603 - Experimental support for newer versions of OpenFlow. See
604 the "What versions of OpenFlow does Open vSwitch support?"
605 question in the FAQ for more details.
606 - The OpenFlow "dp_desc" may now be configured by setting the
607 value of other-config:dp-desc in the Bridge table.
608 - It is possible to request the OpenFlow port number with the
609 "ofport_request" column in the Interface table.
610 - The NXM flow_removed message now reports the OpenFlow table ID
611 from which the flow was removed.
613 - New support for the VXLAN tunnel protocol (see the IETF draft here:
614 http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03).
615 - Tunneling requires the version of the kernel module paired with
616 Open vSwitch 1.9.0 or later.
617 - Inheritance of the Don't Fragment bit in IP tunnels (df_inherit)
618 is no longer supported.
619 - Path MTU discovery is no longer supported.
620 - CAPWAP tunneling support removed.
621 - Tunnels with multicast destination ports are no longer supported.
623 - The "dump-flows" and "del-flows" no longer require an argument
624 if only one datapath exists.
626 - New "vlog/disable-rate-limit" and "vlog/enable-rate-limit"
627 commands available allow control over logging rate limits.
628 - New "dpif/dump-dps", "dpif/show", and "dpif/dump-flows" command
629 that mimic the equivalent ovs-dpctl commands.
630 - The ofproto library is now responsible for assigning OpenFlow port
631 numbers. An ofproto implementation should assign them when
632 port_construct() is called.
633 - All dpif-based bridges of a particular type share a common
634 datapath called "ovs-<type>", e.g. "ovs-system". The ovs-dpctl
635 commands will now return information on that shared datapath. To
636 get the equivalent bridge-specific information, use the new
637 "ovs-appctl dpif/*" commands.
638 - Backward-incompatible changes:
639 - Earlier Open vSwitch versions treated ANY as a wildcard in flow
640 syntax. OpenFlow 1.1 adds a port named ANY, which introduces a
641 conflict. ANY was rarely used in flow syntax, so we chose to
642 retire that meaning of ANY in favor of the OpenFlow 1.1 meaning.
643 - Patch ports no longer require kernel support, so they now work
644 with FreeBSD and the kernel module built into Linux 3.3 and later.
645 - New "sample" action.
649 ------------------------
651 - Support for ipv6 set action.
652 - SKB mark matching and setting.
653 - support for Linux kernels up to 3.8
654 - FreeBSD is now a supported platform, thanks to code contributions from
655 Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
656 - ovs-bugtool: New --ovs option to report only OVS related information.
657 - New %t and %T log escapes to identify the subprogram within a
658 cooperating group of processes or threads that emitted a log message.
659 The default log patterns now include this information.
661 - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
662 fields in IPv6 neighbor discovery messages, and IPv6 flow label.
663 - Adds support for writing to the metadata field for a flow.
665 - The tunneling code no longer assumes input and output keys are
666 symmetric. If they are not, PMTUD needs to be disabled for
667 tunneling to work. Note this only applies to flow-based keys.
668 - New support for a nonstandard form of GRE that supports a 64-bit key.
669 - Tunnel Path MTU Discovery default value was set to 'disabled'.
670 This feature is deprecated and will be removed soon.
671 - Tunnel header caching removed.
673 - Commands and actions that accept port numbers now also accept keywords
674 that represent those ports (such as LOCAL, NONE, and ALL). This is
675 also the recommended way to specify these ports, for compatibility
676 with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
677 for these ports for different purposes).
679 - Support requesting the port number with the "port_no" option in
680 the "add-if" command.
681 - ovs-pki: The "online PKI" features have been removed, along with
682 the ovs-pki-cgi program that facilitated it, because of some
683 alarmist insecurity claims. We do not believe that these claims
684 are true, but because we do not know of any users for this
685 feature it seems better on balance to remove it. (The ovs-pki-cgi
686 program was not included in distribution packaging.)
687 - ovsdb-server now enforces the immutability of immutable columns. This
688 was not enforced in earlier versions due to an oversight.
689 - The following features are now deprecated. They will be removed no
690 earlier than February 2013. Please email dev@openvswitch.org with
692 - Bridge compatibility.
694 - The autopath action.
695 - Interface type "null".
696 - Numeric values for reserved ports (see "ovs-ofctl" note above).
697 - Tunnel Path MTU Discovery.
698 - CAPWAP tunnel support.
699 - The data in the RARP packets can now be matched in the same way as the
704 ------------------------
705 *** Internal only release ***
706 - New FAQ. Please send updates and additions!
707 - Authors of controllers, please read the new section titled "Action
708 Reproduction" in DESIGN, which describes an Open vSwitch change in
709 behavior in corner cases that may affect some controllers.
711 - A new test utility that can create L3 tunnel between two Open
712 vSwitches and detect connectivity issues.
714 - New --sort and --rsort options for "dump-flows" command.
715 - "mod-port" command can now control all OpenFlow config flags.
717 - Allow general bitwise masking for IPv4 and IPv6 addresses in
718 IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
720 - Allow support for arbitrary Ethernet masks. (Previously, only
721 the multicast bit in the destination address could be individually
723 - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
724 - The OFPST_QUEUE request now reports an error if a specified port or
725 queue does not exist, or for requests for a specific queue on all
726 ports, if the specified queue does not exist on any port. (Previous
727 versions generally reported an empty set of results.)
728 - New "flow monitor" feature to allow controllers to be notified of
729 flow table changes as they happen.
730 - Additional protocols are not mirrored and dropped when forward-bpdu is
731 false. For a full list, see the ovs-vswitchd.conf.db man page.
732 - Open vSwitch now sends RARP packets in situations where it previously
733 sent a custom protocol, making it consistent with behavior of QEMU and
735 - All Open vSwitch programs and log files now show timestamps in UTC,
736 instead the local timezone, by default.
740 ------------------------
741 - kernel modules are renamed. openvswitch_mod.ko is now
742 openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
743 - Increased the number of NXM registers to 8.
744 - Added ability to configure DSCP setting for manager and controller
745 connections. By default, these connections have a DSCP value of
746 Internetwork Control (0xc0).
747 - Added the granular link health statistics, 'cfm_health', to an
750 - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
751 - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
754 - Added the "dump-ports-desc" command to retrieve port
755 information using the new port description multipart messages.
757 - Added support for spawning ovs-test server from the client.
758 - Now ovs-test is able to automatically create test bridges and ports.
759 - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
760 - Tripled flow setup performance.
761 - The "coverage/log" command previously available through ovs-appctl
762 has been replaced by "coverage/show". The new command replies with
763 coverage counter values, instead of logging them.
767 ------------------------
768 - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
772 ------------------------
773 *** Internal only release ***
775 - LACP bonds no longer fall back to balance-slb when negotiations fail.
776 Instead they drop traffic.
777 - The default bond_mode changed from SLB to active-backup, to protect
778 unsuspecting users from the significant risks of SLB bonds (which are
779 documented in vswitchd/INTERNALS).
780 - Load balancing can be disabled by setting the bond-rebalance-interval
783 - Added support for bitwise matching on TCP and UDP ports.
784 See ovs-ofctl(8) for more information.
785 - NXM flow dumps now include times elapsed toward idle and hard
787 - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
788 controllers more precise control over which OpenFlow messages they
789 receive asynchronously.
790 - New "fin_timeout" action.
791 - Added "fin_timeout" support to "learn" action.
792 - New Nicira action NXAST_CONTROLLER that offers additional features
793 over output to OFPP_CONTROLLER.
794 - When QoS settings for an interface do not configure a default queue
795 (queue 0), Open vSwitch now uses a default configuration for that
796 queue, instead of dropping all packets as in previous versions.
798 - Logging to console and file will have UTC timestamp as a default for
799 all the daemons. An example of the default format is
800 2012-01-27T16:35:17Z. ovs-appctl can be used to change the default
802 - The syntax of commands and options to set log levels was simplified,
803 to make it easier to remember.
804 - New support for limiting the number of flows in an OpenFlow flow
805 table, with configurable policy for evicting flows upon
806 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
807 for more information.
808 - New "enable-async-messages" column in the Controller table. If set to
809 false, OpenFlow connections to the controller will initially have all
810 asynchronous messages disabled, overriding normal OpenFlow behavior.
811 - ofproto-provider interface:
812 - "struct rule" has a new member "used" that ofproto implementations
813 should maintain by updating with ofproto_rule_update_used().
815 - The new option --timestamp causes the "monitor" command to print
816 a timestamp with every update.
817 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
821 ------------------------
823 - Added support for querying, modifying, and deleting flows
824 based on flow cookie when using NXM.
825 - Added new NXM_PACKET_IN format.
826 - Added new NXAST_DEC_TTL action.
828 - Added daemonization support to the monitor and snoop commands.
830 - The "find" command supports new set relational operators
831 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
832 - ovsdb-tool now uses the typical database and schema installation
833 directories as defaults.
834 - The default MAC learning timeout has been increased from 60 seconds
835 to 300 seconds. The MAC learning timeout is now configurable.
839 ------------------------
840 - Compatible with Open vSwitch kernel module included in Linux 3.3.
841 - New "VLAN splinters" feature to work around buggy device drivers
842 in old Linux versions. (This feature is deprecated. When
843 broken device drivers are no longer in widespread use, we will
844 delete this feature.) See ovs-vswitchd.conf.db(5) for more
847 - Added ability to match on IPv6 flow label through NXM.
848 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
849 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
850 - Added ability to modify ECN bits in IPv4.
851 - Added ability to modify TTL in IPv4.
853 - Don't require the "normal" action to use mirrors. Traffic will
854 now be properly mirrored for any flows, regardless of their
856 - Track packet and byte statistics sent on mirrors.
857 - The sFlow implementation can now usually infer the correct agent
858 device instead of having to be told explicitly.
860 - New "fdb/flush" command to flush bridge's MAC learning table.
862 - A new distributed testing tool that allows one to diagnose performance
863 and connectivity issues. This tool currently is not included in RH or
865 - RHEL packaging now supports integration with Red Hat network scripts.
867 - Post 1.4.*, OVS will be changing the default bond mode from balance-slb
868 to active-backup. SLB bonds carry significant risks with them
869 (documented vswitchd/INTERNALS) which we want to prevent unsuspecting
870 users from running into. Users are advised to update any scripts or
871 configuration which may be negatively impacted by explicitly setting
872 the bond mode which they want to use.
876 ------------------------
878 - Added an OpenFlow extension which allows the "output" action to accept
880 - Added an OpenFlow extension for flexible learning.
881 - Bumped number of NXM registers from four to five.
883 - New "version" command to determine version of running daemon.
884 - If no argument is provided for "cfm/show", displays detailed
885 information about all interfaces with CFM enabled.
886 - If no argument is provided for "lacp/show", displays detailed
887 information about all ports with LACP enabled.
889 - New "set-if" command to modify a datapath port's configuration.
891 - The software switch now supports 255 OpenFlow tables, instead
892 of just one. By default, only table 0 is consulted, but the
893 new NXAST_RESUBMIT_TABLE action can look up in additional
894 tables. Tables 128 and above are reserved for use by the
895 switch itself; please use only tables 0 through 127.
896 - Add support for 802.1D spanning tree (STP).
897 - Fragment handling extensions:
898 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
899 fields are made available for matching in fragments with
901 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
902 via "ip_frag" in ovs-ofctl).
903 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
904 fragment handling policy.
905 - CAPWAP tunneling now supports an extension to transport a 64-bit key.
906 By default it remains compatible with the old version and other
907 standards-based implementations.
908 - Flow setups are now processed in a round-robin manner across ports
909 to prevent any single client from monopolizing the CPU and conducting
910 a denial of service attack.
911 - Added support for native VLAN tagging. A new "vlan_mode"
912 parameter can be set for "port". Possible values: "access",
913 "trunk", "native-tagged" and "native-untagged".
914 - test-openflowd has been removed. Please use ovs-vswitchd instead.
917 ------------------------
918 - New "ofproto" abstraction layer to ease porting to hardware
920 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
921 - Datapath support for Linux kernels up to 3.0.
923 - New "bundle" and "bundle_load" action extensions.
925 - Implement table unique constraints.
926 - Support cooperative locking between callers.
928 - New "-s" option for "show" command prints packet and byte
929 counters for each port.
931 - New "--readd" option for "replace-flows".
933 - New "show" command to print an overview of configuration.
934 - New "comment" command to add remark that explains intentions.
935 - ovs-brcompatd has been rewritten to fix long-standing bugs.
936 - ovs-openflowd has been renamed test-openflowd and moved into the
937 tests directory. Its presence confused too many users. Please
938 use ovs-vswitchd instead.
939 - New ovs-benchmark utility to test flow setup performance.
940 - A new log level "off" has been added. Configuring a log facility
941 "off" prevents any messages from being logged to it. Previously,
942 "emer" was effectively "off" because no messages were ever logged at
943 level "emer". Now, errors that cause a process to exit are logged
945 - "configure" option --with-l26 has been renamed --with-linux, and
946 --with-l26-source has been renamed --with-linux-source. The old
947 names will be removed after the next release, so please update
949 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
950 datapath/linux-2.6/compat-2.6 directories.
952 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
953 Please use the extensible match extensions instead.
954 - Removed the Maintenance_Point and Monitor tables in an effort
955 to simplify 802.1ag configuration.
956 - Performance and scalability improvements
960 ------------------------
961 - Ability to define policies over IPv6
964 - Support for extensible match extensions to OpenFlow
966 - Support for HFSC qdisc.
967 - Queue used by in-band control can now be configured.
969 - Kernel<->userspace interface has been reworked and should be
970 close to a stable ABI now.
971 - "Port group" concept has been dropped.
972 - GRE over IPSEC tunnels
974 - New active backup bonding mode.
975 - New L4 hashing support when LACP is enabled.
976 - Source MAC hash now includes VLAN field also.
978 - Greatly improved handling of large flow tables
980 - "show" command now prints full vport configuration.
981 - "dump-groups" command removed since kernel support for
982 port groups was dropped.
984 - New commands for working with the new Managers table.
985 - "list" command enhanced with new formatting options and --columns
987 - "get" command now accepts new --id option.
988 - New "find" command.
990 - New "queue-stats" command for printing queue stats.
991 - New commands "replace-flows" and "diff-flows".
992 - Commands to add and remove flows can now read from files.
993 - New --flow-format option to enable or disable NXM.
994 - New --more option to increase OpenFlow message verbosity.
995 - Removed "tun-cookie" command, which is no longer useful.
996 - ovs-controller enhancements for testing various features.
997 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
998 bugs. New ovs-vlan-bug-workaround command for enabling and
999 disabling a workaround for these driver bugs.
1001 - "Resubmit" actions now update flow statistics.
1002 - New "register" extension for use in matching and actions, via NXM.
1003 - New "multipath" experimental action extension.
1004 - New support for matching multicast Ethernet frames, via NXM.
1005 - New extension for OpenFlow vendor error codes.
1006 - New extension to set the QoS output queue without actually
1007 sending to an output port.
1008 - Open vSwitch now reports a single flow table, instead of
1009 separate hash and wildcard tables. This better models the
1010 current implementation.
1011 - New experimental "note" action.
1012 - New "ofproto/trace" ovs-appctl command and associated utilities
1013 to ease debugging complex flow tables.
1015 - Schema documentation now includes an entity-relationship diagram.
1016 - The database is now garbage collected. In most tables,
1017 unreferenced rows will be deleted automatically.
1018 - Many tables now include statistics updated periodically by
1019 ovs-vswitchd or ovsdb-server.
1020 - Every table now has an "external-ids" column for use by OVS
1022 - There is no default controller anymore. Each bridge must have its
1023 controller individually specified.
1024 - The "fail-mode" is now a property of a Bridge instead of a Controller.
1025 - New versioning and checksum features.
1026 - New Managers table and manager_options column in Open_vSwitch table
1027 for specifying managers. The old "managers" column in the
1028 Open_vSwitch table has been removed.
1029 - Many "name" columns are now immutable.
1031 - Dropped support for XenServer pre-5.6.100.
1032 - Dropped support for Linux pre-2.6.18.
1033 - Dropped controller discovery support.
1034 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
1035 Statistics reporting in the database is a rough equivalent.
1036 - Dropped the "corekeeper" package (now separate, at
1037 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
1038 - Performance and scalability improvements
1041 v1.1.0pre2 - 13 Sep 2010
1042 ------------------------
1045 v1.1.0pre1 - 31 Aug 2010
1046 ------------------------
1047 - OpenFlow 1.0 slicing (QoS) functionality
1048 - Python bindings for configuration database (no write support)
1049 - Performance and scalability improvements
1052 v1.0.1 - 31 May 2010
1053 --------------------
1054 - New "patch" interface type
1057 v1.0.0 - 15 May 2010
1058 --------------------
1059 - Configuration database with remote management
1062 - Support for XenServer 5.5 and 5.6
1063 - Performance and scalability improvements
1066 v0.99.2 - 18 Feb 2010
1067 ---------------------
1070 v0.99.1 - 25 Jan 2010
1071 ---------------------
1072 - Add support for sFlow(R)
1073 - Make headers compatible with C++
1076 v0.99.0 - 14 Jan 2010
1077 ---------------------
1078 - User-space forwarding engine
1081 v0.90.7 - 29 Nov 2009
1082 ---------------------
1083 - Add support for NetFlow active timeouts
1086 v0.90.6 - 6 Oct 2009
1087 --------------------
1090 v0.90.5 - 21 Sep 2009
1091 ---------------------
1092 - Generalize in-band control to more diverse network setups
projects / mirror_ovs.git / blob