1 Note: this file lists major user-visible changes only.
3 * Changes in Quagga 0.99.24
6 - [pimd] New daemon: pimd provides IPv4 PIM-SSM multicast routing.
7 - [bgpd] New feature: "next-hop-self all" to override nexthop on iBGP route
9 - [bgpd] route-maps have a new action "set ipv6 next-hop peer-address"
10 - [bgpd] route-maps have a new action "set as-path prepend last-as"
11 - [bgpd] Update validity checking (particularly MP-BGP / IPv6 routes) was
12 touched up significantly. Please report possible bugs.
13 - [ripd] New feature: RIP for IPv4 now supports equal-cost multipath (ECMP)
14 - [zebra] Multicast RIB support has been extended. It still is IPv4 only.
15 - [zebra] "no link-detect" is now printed in configurations since it won't
16 be the default anymore soon. To retain current behaviour, re-save your
17 configuration after updating to 0.99.24.
19 Distributor-visible changes:
20 - --enable-pimd is added to enable pimd. It is considered experimental, though
21 unless the distribution target is embedded systems with little flash, there
22 is no reason to not include it in packages.
23 - --disable-ipv6 no longer exists as an option. It's 2015, your C library
24 really needs to have IPv6 support by now.
25 - --disable-netlink no longer exists as an option. It didn't work anyway.
26 - --disable-solaris no longer exists as an option. It only controlled some
28 - --enable-isisd is now the default.
29 - mrlg.cgi is no longer included (it was severely outdated). It can be found
30 independently at http://mrlg.op-sec.us/
31 - build on Linux with the musl C library should now work
33 * Changes in Quagga 0.99.23
36 - [bgpd] setting an extcommunity in a route map on a route that already has
37 an extcommunity attribute will cause bgpd to crash. This issue will be
38 fixed in a followup minor release.
41 - [lib] Performance enhancements on hashes and timers.
42 - [bgpd] New feature: iBGP TTL security.
43 - [bgpd] New feature: relaxed bestpath criteria for multipath and improved
44 display of multipath routes in "show ip bgp". Scripts parsing this output
45 may need to be updated.
46 - [bgpd] Multiprotocol peerings over IPv6 now try to find a more appropriate
47 IPv4 nexthop by looking at the interface.
48 - [ospf6d] A large amount of changes has been merged for ospf6d. Careful
49 evaluation prior to deployment is recommended.
50 - [zebra] Recursive route support has been overhauled. Scripts parsing
51 "show ip route" output may need adaptation.
52 - [zebra] IPv6 address management has been improved regarding tentative
53 addresses. This is visible in that a freshly configured address will not
54 immediately be marked as usable.
55 - [*] a lot of bugs have been fixed, please refer to the git log
57 * Changes in Quagga 0.99.22
59 - [bgpd] The semantics of default-originate route-map have changed.
60 The route-map is now used to advertise the default route conditionally.
61 The old behaviour which allowed to set attributes on the originated
62 default route is no longer supported.
63 - [bgpd] There is now a replace-as option to neighbor ... local-as ...
64 no-prepend. For details, refer to the user documentation.
65 - [zebra] An FPM interface has been added. This provides an alternate
66 interface to routing information and is geared at OpenFlow & co.
67 - [snmp] AgentX is now supported; the old smux backend is considered
68 deprecated. ospf6d has also had OSPFV3-MIB added.
69 - [*] several issues with configuration save/load/apply have been fixed,
70 in particular on ospf "max-metric router-lsa administrative" and
71 "distribute-list", bgpd "no neighbor activate", isisd "metric-style",
72 - [*] a lot of bugs have been fixed, please refer to the git log
74 * Changes in Quagga 0.99.21
76 - [bgpd] BGP multipath support has been merged
77 - [bgpd] SAFI (Multicast topology) support has been extended to propagate
78 the topology to zebra.
79 - [bgpd] AS path limit functionality has been removed
80 - [babeld] a new routing daemon implementing the BABEL ad-hoc mesh routing
81 protocol has been merged.
82 - [isisd] a major overhaul has been picked up. Please note that isisd is
83 STILL NOT SUITABLE FOR PRODUCTION USE.
84 - [*] a lot of bugs have been fixed, please refer to the git log
86 * Changes in Quagga 0.99.10
88 - [bgpd] 4-byte AS support added
89 - [bgpd] MRT format changes to version 2. Those relying on
90 bgpd MRT table dumps may need to update their tools.
91 - [bgpd] Added new route-map set statement: "as-path exclude"
92 - Zebra RIB updates queue has evolved into a multi-level
93 structure to address RIB consistency issues.
95 * Changes in Quagga 0.99.2
97 - [bgpd] Work queues added to bgpd to split up update processing,
98 particularly beneficial when a peer session goes down. AS_PATH
99 parsing rewritten to be clearer, more robust and ready for 4-byte.
101 - [ripd] Simple authentication is no longer the default authentication
102 mode for ripd. The default is now no-authentication. Any setups which
103 used simple authentication will probably need to update their
104 configuration manually.
106 - [ospfd] 1s dead-interval with sub-second Hellos feature added.
107 SPF timers now specified in milliseconds, and with adaptive
108 hold-time support. RFC3137 Stub-router support added. Default ABR
111 - Solaris least privileges support added.
113 * Changes in Quagga 0.99.1
115 - Zserv is now buffered via threads and non-blocking in most cases for both
116 clients and zebra, which should improve responsiveness of daemons when
117 they must send many messages to zebra.
119 - 'show thread cpu' now displays both cpu+system and wall-clock time,
120 where getrusage() is available.
122 - Background threads added and workqueue API added, with a
123 'show work-queues' command. Thread scheduling improved slightly.
125 - Zebra now has a work-queue for RIB processing. See 'show work-queues' in
126 the zebra daemon vty.
128 - Support for interface renaming on Linux netlink systems.
130 - GNU Zebra bgpd merges, including BGP Graceful-restart and "match ip
131 route-source" command.
133 - Automatic logging of backtraces should daemons crash to assist in
134 diagnosis. See the documentation for more information on configuring
135 logging correctly, and set --enable-gcc-rdynamic if compiling with gcc.
137 * Changes in Quagga 0.98.0
139 - Logging facilities upgraded. One can now specify a severity level
140 for each logging destination. And a new "show logging" command gives
141 thorough information on the current logging system configuration.
143 - Watchquagga daemon added. This is not well tested yet. Please try
144 monitor mode first before enabling restart features. It is important
145 to make sure that the various timers are configured with appropriate
146 values for your site.
148 - BGP route-server support added. See the texinfo documentation.
150 - OSPF API initialisation is disabled by default even if compiled in. You
151 can enable it with -a/--apiserver command line switch.
153 - "write-config integrated" vtysh command replaced with "service
154 integrated-vtysh-config" command.
156 - Router id is now handled by zebra daemon and all daemons receive changes
157 from it. Router id can be overriden in daemons' configurations of course.
158 To fix common router id in zebra daemon you can either install non-127
159 address on loopback or use "router-id x.x.x.x" command.
161 - "secondary" keyword is removed from ip address configuration. All
162 supported OS'es have their own vision what's secondary address and
165 - Zebra no longer enables forwarding by default. If you rely on zebra to
166 enable forwarding make sure to add '<ip|ip6> forwarding' statements
167 to your zebra configuration file.
169 - All libraries are built and used shared, on platforms where libtool
170 supports shared libraries.
172 - Router advertisement syntax is changed. In usual cases (if you didn't do
173 any fancy stuff) it's enough to change lines in configuration from:
174 "ipv6 nd prefix-advertisement X:X:X:X::/X 2592000 604800 autoconfig on-link"
176 "ipv6 nd prefix X:X:X:X::/X"
178 All router advertisement options are documented in texi documentation.
180 - --enable-nssa configure switch is removed. NSSA support is stable enough.
182 - Daemons don't look at current directory for config file any more.
184 * Changes in Quagga 0.96.5
186 - include files are installed in $(prefix)/include/quagga. Programs
187 building against these includes should -I$(prefix)/include and e.g.
188 #include <quagga/routemap.h>
190 - New option --enable-exampledir puts example files in a separate
191 directory from $(sysconfdir), easing NetBSD pkgsrc hierarchy rules
194 - New configure options --enable-configfile-mask and
195 --enable-logfile-mask to set umask values for config and log
196 values. Masks default to 0600, matching previous behavior.
198 - Import current CVS isisd from SourceForge, then merge it with
199 the Quagga's Framework.
201 * Changes in Quagga 0.96.4
203 - Further fixes to ospfd, some relating to the PtP revert. Interface
204 lookups should be a lot more robust now.
206 - Fix for a remote triggerable crash in vty layer.
208 - Improvements to ripd, and addition of split horizon support.
210 - Improved bgpd table support, now dumps at time of day intervals rather
211 than time from startup intervals. Much improved support for IPv6 table
212 dumps. show commands for views improved.
214 * Changes in Quagga 0.96.3
216 - revert the 'generic PtP' patch. Means Quagga will no longer work with
217 FreeSWAN, however, on the plus side this gets rid of a lot of niggly bugs
218 which the PtP patch introduced.
220 * Changes in Quagga 0.96.2
224 * Changes in Quagga 0.96.1
226 - Iron out problem with the privileges definitions
228 * Changes in Quagga 0.96
230 - Privilege support, daemons now run with the minimal privileges needed, see
231 the documentation for details.
233 - NSSA ABR support in ospfd.
235 - OSPF-API support merged in.
237 - 6WIND patch merged in.
239 * Changes in zebra-0.93
243 ** Configuration is changed to new format.
247 ** Crush bugs which reported on Zebra ML is fixed.
249 ** Opaque LSA and TE LSA support is added by KDD R&D Laboratories,
254 ** Many bugs are fixed.
256 * Changes in zebra-0.92a
260 ** Fix "^$" community list bug.
262 ** Below command's Address Family specific configurations are added
265 route-reflector-client
267 soft-reconfiguration inbound
271 ** Treat kernel type routes as EGP routes.
273 * Changes in zebra-0.92
275 ** Overall security is improved. Default umask is 0077.
279 ** If output interface is in simple password authentication mode,
280 substruct one from rtemax.
284 ** IPv4 multicast and IPv6 unicast configuration is changed to so
285 called new config. All of AFI and SAFI specific configuration is
286 moved to "address-family" node. When you have many IPv6 only
287 configuration, you will see many "no neighbor X:X::X:X activate" line
288 in your configuration to disable IPv4 unicast NLRI exchange. In that
289 case please use "no bgp default ipv4-unicast" command to suppress the
290 output. Until zebra-0.93, old config is still left for compatibility.
295 bgp router-id 10.0.0.1
296 redistribute connected
297 network 192.168.0.0/24
298 neighbor 10.0.0.2 remote-as 7675
299 ipv6 bgp network 3ffe:506::/33
300 ipv6 bgp network 3ffe:1800:e800::/40
301 ipv6 bgp aggregate-address 3ffe:506::/32
302 ipv6 bgp redistribute connected
303 ipv6 bgp neighbor 3ffe:506:1000::2 remote-as 1
308 bgp router-id 10.0.0.1
309 network 192.168.0.0/24
310 redistribute connected
311 neighbor 10.0.0.2 remote-as 7675
312 neighbor 3ffe:506:1000::2 remote-as 1
313 no neighbor 3ffe:506:1000::2 activate
316 network 3ffe:506::/33
317 network 3ffe:1800:e800::/40
318 aggregate-address 3ffe:506::/32
319 redistribute connected
320 neighbor 3ffe:506:1000::2 activate
325 ** Internal interface treatment is changed. Now ospfd can handle
326 multiple IP address for an interface.
328 ** Redistribution of loopback interface's address works fine.
330 * Changes in zebra-0.91
332 ** --enable-oldrib configure option is removed.
334 ** HAVE_IF_PSEUDO part is removed. Same feature is now supported by
339 ** When redistributed route is withdrawn, perform poisoned reverse.
343 ** When interface's address is removed, kernel route pointing out to
344 the address is removed.
346 ** IPv6 RIB is now based upon new RIB code.
348 ** zebra can handle same connected route to one interface.
350 ** New command for interface address. Currently this commands are
351 only supported on GNU/Linux with netlink interface.
353 "ip address A.B.C.D secondary"
354 "ip address A.B.C.D label LABEL"
358 ** BGP flap dampening bugs are fixed.
360 ** BGP non-blocking TCP connection bug is fixed.
362 ** "show ip bgp summary" shows AS path and community entry number.
364 ** New commands have been added.
365 "show ip bgp cidr-only"
366 "show ip bgp ipv4 (unicast|multicast) cidr-only"
367 "show ip bgp A.B.C.D/M longer-prefixes"
368 "show ip bgp ipv4 (unicast|multicast) A.B.C.D/M longer-prefixes"
369 "show ipv6 bgp X:X::X:X/M longer-prefixes"
370 "show ipv6 mbgp X:X::X:X/M longer-prefixes"
372 ** IPv6 IBGP nexthop change is monitored.
374 ** Unknown transitive attribute is passed with partial flag bit on.
378 ** Fix bug of LSA MaxAge flood.
380 ** Fix bug of NSSA codes.
382 * Changes in zebra-0.90
384 ** From this beta release, --enable-unixdomain and --enable-newrib
385 becomes default. So both options are removed from configure.in. To
386 revert old behavior please specify below option.
388 --enable-tcp-zebra # TCP/IP socket is used for protocol daemon and zebra.
389 --enable-oldrib # Turn on old RIB implementation.
391 Old RIB implementation will be removed in zebra-0.91.
393 ** From this beta release --enable-multipath is supported. This
394 option is only effective on GNU/Linux kernel with
395 CONFIG_IP_ADVANCED_ROUTER and CONFIG_IP_ROUTE_MULTIPATH is set.
397 --enable-multipath=ARG # ARG must be digit. When ARG is 0 unlimit multipath number.
399 ** From this release we do not include guile files.
403 ** newlist.[ch] is merged with linklist.[ch].
405 ** Now Zebra works on MacOS X public beta.
407 ** Access-list can have remark. "access-list WORD remark LINE" define
408 remark for specified access-list.
410 ** Key of key-chain is sorted by it's idetifier value.
412 ** prefix-list rule is slightly changed. The rule of "len <= ge-value
413 <= le-value" is changed to "len < ge-value <= le-value".
415 ** According to above prefix-list rule change, add automatic
416 conversion function of an old rule. ex.) 10.0.0.0/8 ge 8 -> 10.0.0.0/8
419 ** SMUX can handle SNMP trap.
421 ** In our event library, event thread is executed before any other
422 thread like timer, read and write event.
424 ** Robust method for writing configuration file and recover from
425 backing up config file.
427 ** Display "end" at the end of configuration.
429 ** Fix memory leak in vtysh_read().
431 ** Fix memroy leak about access-list and prefix-list name.
435 ** UNIX domain socket server of zebra protocol is added.
437 ** Fix PointoPoint interface network bug. The destination network
438 should be installed into routing table instead of local network.
440 ** Metric value is reflected to kernel routing table.
442 ** "show ip route" display uptime of RIP,OSPF,BGP routes.
444 ** New RIB implementation is added.
446 Now we have enhanced RIB (routing information base) implementation in
447 zebra. New RIB has many new features and fixed some bugs which exist
450 *** Static route with distance value
452 Static route can be specified with administrative distance. The
453 distance value 255 means it is not installed into the kernel.
454 Default value of distance for static route is 1.
456 ip route A.B.C.D/M A.B.C.D <1-255>
457 ip route A.B.C.D/M IFNAME <1-255>
459 If the least distance value's route's nexthop are unreachable,
460 select the least distance value route which has reachable nexthop is
463 ip route 0.0.0.0/0 10.0.0.1
464 ip route 0.0.0.0/0 11.0.0.1 2
466 In this case, when 10.0.0.1 is unreachable and 11.0.0.1 is
467 reachable. The route with nexthop 11.0.0.1 will be installed into
471 S>* 0.0.0.0/0 [2/0] via 11.0.0.1
472 S 0.0.0.0/0 [1/0] via 10.0.0.1 inactive
474 If the nexthop is unreachable "inactive" is displayed. You can
475 specify any string to IFNAME. There is no need of the interface is
476 there when you configure the route.
478 ip route 1.1.1.1/32 ppp0
480 When ppp0 comes up, the route is installed properly.
482 *** Multiple nexthop routes for one prefix
484 Multiple nexthop routes can be specified for one prefix. Even the
485 kernel support only one nexthop for one prefix user can configure
488 When you configure routes like below, prefix 10.0.0.1 has three
491 ip route 10.0.0.1/32 10.0.0.2
492 ip route 10.0.0.1/32 10.0.0.3
493 ip route 10.0.0.1/32 eth0
495 If there is no route to 10.0.0.2 and 10.0.0.3. And interface eth0
496 is reachable, then the last route is installed into the kernel.
499 S> 10.0.0.1/32 [1/0] via 10.0.0.2 inactive
500 via 10.0.0.3 inactive
501 * is directly connected, eth0
503 '*' means this nexthop is installed into the kernel.
505 *** Multipath (more than one nexthop for one prefix) can be installed into the kernel.
507 When the kernel support multipath, zebra can install multipath
508 routes into the kernel. Before doing that please make it sure that
509 setting --enable-multipath=ARG to configure script. ARG must be digit
510 value. When specify 0 to ARG, there is no limitation of the number
511 of the multipath. Currently only GNU/Linux with netlink interface is
514 ip route 10.0.0.1/32 10.0.0.2
515 ip route 10.0.0.1/32 10.0.0.3
516 ip route 10.0.0.1/32 eth0
519 S>* 10.0.0.1/32 [1/0] via 10.0.0.2
521 is directly connected, eth0
523 *** Kernel message delete installed route.
525 After zebra install static or dynamic route into the kernel.
527 R>* 0.0.0.0/0 [120/3] via 10.0.0.1
529 If you delete this route outside zebra, old zebra does not reinstall
530 route again. Now the route is re-processed and properly reinstall the
531 static or dynamic route into the kernel.
533 ** GNU/Linux netlink socket handling is improved to fix race condition
534 between kernel message and user command responce.
538 ** Add show neighbor's routes command.
540 "show ip bgp neighbors (A.B.C.D|X:X::X:X) routes"
541 "show ip bgp ipv4 (unicast|multicast) neighbors (A.B.C.D|X:X::X:X) routes"
542 "show ipv6 bgp neighbors (A.B.C.D|X:X::X:X) routes"
543 "show ipv6 mbgp neighbors (A.B.C.D|X:X::X:X) routes"
545 ** BGP passive peer support problem is fixed.
547 ** Redistributed IGP nexthop is passed to BGP nexthop.
549 ** On multiaccess media, if the nexthop is reachable nexthop is passed
552 ** Remove zebra-0.88 compatibility commands.
554 "match ip prefix-list WORD"
555 "match ipv6 prefix-list WORD"
557 Instead of above please use below commands.
559 "match ip address prefix-list WORD"
560 "match ipv6 address prefix-list WORD"
562 ** Fix bug of holdtimer is not reset when bgp cleared.
564 ** "show ip bgp summary" display peer establish/drop count.
566 ** Change "match ip next-hop" argument from IP address to access-list
569 ** When "bgp enforce-first-as" is enabled, check EBGP peer's update
570 has it's AS number in the first AS number in AS sequence.
572 ** New route-map command "set community-delete COMMUNITY-LIST" is
573 added. Community matched the CoMMUNITY-LIST is removed from the
576 ** BGP-MIB implementation is finished.
578 ** When BGP connection comes from unconfigured IP address, close
581 ** Do not compare router ID when the routes comes from EBGP peer.
582 When originator ID is same, take shorter cluster-list route. If
583 cluster-list is same take smaller IP address neighbor's route.
585 ** Add "bgp bestpath as-path ignore" command. When this option is
586 set, do not concider AS path length when route selection.
588 ** Add "bgp bestpath compare-routerid". When this option is set,
589 compare router ID when the routes comes from EBGP peer.
591 ** Add "bgp deterministic-med" process.
593 ** BGP flap dampening feature is added.
595 ** When IBGP nexthop is changed, it is reflected to RIB.
597 ** Change "neighbor route-refresh" command to "neighbor capability
602 ** Change "match ip next-hop" argument from IP address to access-list
605 ** "no ip rip (send|receive)" command accept version number argument.
607 ** Memory leak related classfull network generation is fixed.
609 ** When a route is in garbage collection process (invalid with metric
610 16) and a router receives the same route with valid metric then route
611 was not installed into zebra rib, but only into ripd rib. Moreover ,
612 it will never get into zebra rib, because ripd wrongly assumes it's
617 ** Fix bug of refreshing default route.
619 ** --enable-nssa turn on undergoing NSSA feature.
621 ** Fix bug of Hello packet's option is not properly set when interface
624 ** Reduce unconditional logging.
626 ** Add nexthop to OSPF path only when it is not there.
628 ** When there is no DR on network (suppose you have only one router
629 with interface priority 0). It's router LSA does not contain the link
630 information about this network.
632 ** When you change a priority of interface from/to 0
633 ISM_NeighborChange event should be scheduled in order to elect new
634 DR/BDR on the network.
636 ** When we add some LSA into retransmit list we need to check whether
637 the present old LSA in retransmit list is not more recent than the new
640 ** In states Loading and Full the slave must resend its last Database
641 Description packet in response to duplicate Database Description
642 packets received from the master. For this reason the slave must wait
643 RouterDeadInterval seconds before freeing the last Database
644 Description packet. Reception of a Database Description packet from
645 the master after this interval will generate a SeqNumberMismatch
646 neighbor event. RFC2328 Section 10.8
648 ** Virtual link can not configured in stub area.
650 ** Clear a ls_upd_queue queue of the interface when interface goes
653 ** "no router ospf" unregister redistribution requests from zebra.
655 ** New command for virtual-link configuration is added.
657 "area A.B.C.D virtual-link A.B.C.D"
658 "area A.B.C.D virtual-link A.B.C.D hello-interval <1-65535> retransmit-interval <3-65535> transmit-delay <1-65535> dead-interval <1-65535>"
659 "area A.B.C.D virtual-link A.B.C.D hello-interval <1-65535> retransmit-interval <3-65535> transmit-delay <1-65535> dead-interval <1-65535> authentication-key AUTH_KEY"
660 "area A.B.C.D virtual-link A.B.C.D authentication-key AUTH_KEY"
661 "area A.B.C.D virtual-link A.B.C.D hello-interval <1-65535> retransmit-interval <3-65535> transmit-delay <1-65535> dead-interval <1-65535> message-digest-key <1-255> md5 KEY"
662 "area A.B.C.D virtual-link A.B.C.D message-digest-key <1-255> md5 KEY"
664 ** Clear cryptographic sequence number when neighbor status is changed
667 ** Make Summary LSA's origination and refreshment as same as other
670 ** New OSPF pakcet read method. Now maximum packet length may be 65535
671 bytes (maximum IP packet length).
673 ** Checking the age of the found LSA and if the LSA is MAXAGE we
674 should call refresh instead of originate.
676 ** Install multipath information to zebra.
678 ** Fix socket descriptor leak when system call failed.
682 ** Whole functionality has been rewritten as new code. new command
683 "show ipv6 ospf6 spf node", "show ipv6 ospf6 spf tree", "show ipv6
684 ospf6 spf table" has been added.
686 ** Change to do not send garbage route whose nexthop is not linklocal
689 ** "redistribute ospf6" was generated in "router ospf6" in config
692 ** LSDB sync bug is fixed.
694 ** Fix bug of using unavailable route.
698 ** route-map and access-list configuration is merged into one
701 ** /usr/local/etc/Zebra.conf is integrated configuration file. "write
702 memory" in vtysh will write whole configuration to this file.
704 ** When -b option is specified to vtysh, vtysh read
705 /usr/local/etc/Zebra.conf file then pass the confuguration to proper
706 protocol daemon. So make all protocol daemon's configuration file
707 empty then invoke all daemon. After that vtysh -b will setup saved
712 /usr/local/sbin/zebra -d
713 /usr/local/sbin/ripd -d
714 /usr/local/sbin/ospfd -d
715 /usr/local/sbin/bgpd -d
716 /usr/local/bin/vtysh -b
718 * Changes in zebra-0.89
722 ** distribute-list can set all interface's access-list and prefix-list
727 ** "show ip protocols" display proper distribute-list settings and
730 ** When metric infinity route received withdraw the route from kernel
731 immediately it used to be wait garbage collection.
733 ** key-chain can be used for simple password authentication.
735 ** RIPv2 MIB getnext interface bug is fixed.
739 ** --with-libpam enable PAM authentication for vtysh.
741 ** Now vtysh read vtysh.conf. This file should be
742 ${SYSCONFDIR}/etc/vtysh.conf for security reason. Usually it is
743 /usr/local/etc/vtysh.conf.
745 ** "username WORD nopassword" command is added to vtysh.
749 ** NBMA interface support is added.
751 ** OSPF area is sorted by area ID.
753 ** New implementation of OSPF refreesh.
755 ** OSPF-MIB read function is partly added.
759 ** When the peering is done by ebgp-multihop, nexthop is looked up
762 ** "show ip mbgp" commands are changed to "show ip bgp ipv4
765 ** New terminal commands are added.
766 "show ip bgp ipv4 (unicast|multicast) filter-list WORD"
767 "show ip bgp ipv4 (unicast|multicast) community"
768 "show ip bgp ipv4 (unicast|multicast) community-list WORD"
769 "show ip bgp ipv4 (unicast|multicast) community-list WORD exact-match"
771 ** MBGP soft-reconfiguration command is added.
772 "clear ip bgp x.x.x.x ipv4 (unicast|multicast) in"
773 "clear ip bgp x.x.x.x ipv4 (unicast|multicast) out"
774 "clear ip bgp x.x.x.x ipv4 (unicast|multicast) soft"
775 "clear ip bgp <1-65535> ipv4 (unicast|multicast) in"
776 "clear ip bgp <1-65535> ipv4 (unicast|multicast) out"
777 "clear ip bgp <1-65535> ipv4 (unicast|multicast) soft"
778 "clear ip bgp * ipv4 (unicast|multicast) in"
779 "clear ip bgp * ipv4 (unicast|multicast) out"
780 "clear ip bgp * ipv4 (unicast|multicast) soft"
782 ** MED related commands are added.
783 "bgp deterministic-med"
784 "bgp bestpath med confed"
785 "bgp bestpath med missing-as-worst"
787 ** "bgp default local-preference" command is added.
789 ** BGP confederation peer's routes are passed to zebra like IBGP route.
791 ** Community match command is added.
792 "show ip bgp community <val>"
793 "show ip bgp community <val> exact-match"
795 ** EBGP multihop route treatment bug is fixed. Now nexthop is
796 resolved by IGP routes.
798 ** Some commands are added to show routes by filter-list and community
800 "show ip bgp ipv4 (unicast|multicast) filter-list WORD"
801 "show ip bgp ipv4 (unicast|multicast) community"
802 "show ip bgp ipv4 (unicast|multicast) community-list WORD"
803 "show ip bgp ipv4 (unicast|multicast) community-list WORD exact-match"
807 ** zebra read interface's address information using getifaddrs() when
810 ** Reflect IPv6 interface's address change to protocol daemons.
812 * Changes in zebra-0.88
816 ** "exact-match" option is added to "access-list" and "ipv6
817 access-list" command. If this option is specified, the prefix and
818 prefix length is compared as exact match mode.
822 ** New Zebra message ZEBRA_REDISTRIBUTE_DEFAULT_ADD and
823 ZEBRA_REDISTRIBUTE_DEFAULT_DELTE are added.
825 ** Default administrative distance value is changed.
828 ------------------------------------------
837 bgp 70 200(iBGP) 20(eBGP)
838 ------------------------------------------
840 ** Distance value can be passed from protocol daemon to zebra.
842 ** "show ip route" shows [metric/distance] value pair.
844 ** Zebra Protocol is changed to support multi-path route and distance
849 ** "default-information originate [always]" command is added.
851 ** "default-metric <0-16777214>" command is added.
853 ** "show ip ospf database" command is integrated. LS-ID and AdvRouter can
854 be specifed. The commands are
856 show ip ospf database TYPE LS-ID
857 show ip ospf database TYPE LS-ID ADV-ROUTER
858 show ip ospf database TYPE LS-ID self-originate
859 show ip ospf database TYPE self-originate
861 ** route-map support for `redistribute' command are added.
862 Supported `match' statements are
868 Supported `set' statements are
873 ** Pass OSPF metric value to zebra daemon.
877 ** When specified route-map does not exist, it means all deny.
879 ** "default-metric <1-16>" command is added.
881 ** "offset-list ACCESS-LIST-NAME <0-16>" and "offset-list
882 ACCESS-LIST-NAME <0-16> IFNAME" commands are added.
884 ** "redistribute ROUTE-TYPE metric <0-16>" command is added.
886 ** "default-information originate" command is added.
888 ** "ip split-horizon" and "no ip split-horizon" is added to interface
891 ** "no router rip" command is added.
893 ** "ip rip authentication mode (md5|text)" is added to interface
896 ** "ip rip authentication key-chain KEY-CHAIN" is added to interface
899 ** Pass RIP metric value to zebra daemon.
901 ** Distance manipulation functions are added.
905 ** Fix bug of next hop treatment for MPLS-VPN route exchange.
907 ** BGP peer MIB is updated.
909 ** Aggregated route has origin IGP, atomic-aggregate and proper
910 aggregator attribute.
912 ** Suppressed route now installed into BGP table. It is only
913 suppressed from announcement.
915 ** BGP router-id is properly set after "no router bgp ASN" and "router
918 ** Add check for nexthop is accessible or not for IBGP routes.
920 ** Add cehck for nexthop is on connected or not for EBGP routes.
922 ** "dump bgp route" command is changed to "dump bgp route-mrt" for
923 generating MRT compatible dump output.
925 ** Soft reconfiguration inbound and outbound is supported.
927 ** Route refresh feature is supported.
931 ** VTY shell is now included into the distribution.
933 * Changes in zebra-0.87
937 ** "show startup-config" command is added.
939 ** "show history" command is added.
941 ** Memory statistics command is changed. New command
951 ** Filters can be removed only specify it's name. New command
954 no ip community-list NAME
955 no ip as-path access-list NAME
960 ** At any node, user can view/save user configuration.
966 are added to every node in default.
968 ** LCD completion is added. For example both "ip" and "ipv6" command
969 are exist, "i" then press TAB will be expanded to "ip".
973 ** "show ip bgp" family shows total number of prefixes.
975 ** "no bgp default ipv4-unicast" command is added.
977 ** Extended Communities support is added.
979 ** "no neighbor PEER send-community extended" command is added.
981 ** MPLS-VPN PE-RR support is added.
983 New address family vpnv4 unicast is introduced.
986 address-family vpnv4 unicast
987 neighobr PEER activate
988 network A.B.C.D rd RD tag TAG
992 To make it route-reflector, please configure it under normal router
997 no bgp default ipv4-unicast
998 bgp router-id 10.0.0.100
999 bgp cluster-id 10.0.0.100
1000 neighbor 10.0.0.1 remote-as 65535
1001 neighbor 10.0.0.1 route-reflector-client
1002 neighbor 10.0.0.2 remote-as 65535
1003 neighbor 10.0.0.2 route-reflector-client
1004 neighbor 10.0.0.3 remote-as 65535
1005 neighbor 10.0.0.3 route-reflector-client
1007 address-family vpnv4 unicast
1008 neighbor 10.0.0.1 activate
1009 neighbor 10.0.0.2 activate
1010 neighbor 10.0.0.3 activate
1016 ** Many many bugs are fixed.
1020 ** Better interface up/down event handle.
1024 ** Better interface up/down event handle.
1026 * Changes in zebra-0.86
1030 ** Fix bug of exec-timeout command which may cause crush.
1032 ** Multiple same policy for "access-list", "ip prefix-list, "as-path
1033 access-list", "ip community-list" is not duplicated.
1035 ** It used to be "ip prefix-list A.B.C.D/M" match routes which mask >=
1036 M. Now default behavior is exact match so it only match routes which
1041 ** "match ip address prefix-list" is added to route-map.
1043 ** A route without local preference is evaluated as 100 local preference.
1045 ** Select smaller router-id route when other values are same.
1047 ** Compare MED only both routes comes from same neighboring AS.
1049 ** "bgp always-compare-med" command is added.
1051 ** Now MED value is passed to IBGP peer.
1053 ** When neighbor's filter is configured with non-existent access-list,
1054 as-path access-list, ip prefix-list, route-map. The behavior is
1055 changed from all permit to all deny.
1059 ** Fix bug of external route tag byte order.
1061 ** OSPF Neighbor deletion bug which cause crush is fixed.
1063 ** Some route calculation bug are fixed.
1065 ** Add sanity check with router routing table.
1067 ** Fix bug of memory leak about linklist.
1069 ** Fix bug of 1-WayReceived in NSM.
1071 ** Take care of BIGENDIAN architecture.
1073 ** Fix bug of NSM state flapping between ExStart and Exchange.
1075 ** Fix bug of Network-LSA originated in stub network.
1077 ** Fix bug of MS flag unset.
1079 ** Add to schedule router_lsa origination when the interface cost
1082 ** Increment LS age by configured interface transmit_delay.
1084 ** distribute-list is reimplemented.
1086 ** Fix bug of refresh never occurs.
1088 ** Fix bug of summary-LSAs reorigination. Correctly copy
1089 OSPF_LSA_APPROVED flag to new LSA. when summary-LSA is reoriginatd.
1091 ** Fix bug of re-origination when a neighbor disappears.
1093 ** Fix bug of segmentation fault with DD retransmission.
1095 ** Fix network-LSA re-origination problem.
1097 ** Fix problem of remaining withdrawn routes on zebra.
1101 ** Do not leave from multicast group when interface goes down bug is
1106 ** Remove client structure when client dies.
1108 ** Take care static route when interface goes up/down.
1110 * Changes in zebra-0.85
1114 ** "transparent-nexthop" and "transparenet-as" commands are added.
1116 ** Route reflector's originator-id bug is fixed.
1120 ** Fix bug of OSPF LSA memory leak.
1122 ** Fix bug of OSPF external route memory leak.
1124 ** AS-external-LSA origination bug was fixed.
1126 ** LS request treatment is completely rewritten. Now performance is
1127 drastically improved.
1131 ** RIPv1 update is done by class-full manner.
1133 * Changes in zebra-0.84b
1137 ** Fix bug of inet_pton return value handling
1141 ** Fix bug of BGP-4+ link-local address nexthop check for IBGP peer.
1143 ** Don't allocate whole buffer for displaying "show ip bgp". Now it
1144 consume only one screen size memory.
1148 ** Fix debug output string.
1150 ** Add RIP peer handling. RIP peer are shown by "show ip protocols".
1152 * Changes in zebra-0.84a
1156 ** Fix serious bug of BGP-4+ peering under IPv6 link-local address.
1157 Due to the bug BGP-4+ peering may not be established.
1159 * Changes in zebra-0.84
1163 ** IPv6 address and prefix parser is added to VTY by Toshiaki Takada
1164 <takada@zebra.org>. DEFUN string is "X:X::X:X" for IPv6 address,
1165 "X:X::X:X/M" for IPv6 prefix. You can use it like this.
1167 DEFUN (func, cmd, "neighbor (A.B.C.D|X:X::X:X) remote-as <1-65535>")
1169 ** VTY configuration is locked during configuration. This is for
1170 avoiding unconditional crush from two terminals modify the
1171 configuration at the same time. "who" command shows which termnal
1172 lock the configuration. VTY which has '*' character at the head of
1173 line is locking the configuration.
1175 ** Old logging functions are removed. Functions like
1176 log_open,log_close,openlog are deleted. Instead of that please use
1177 zlog_* functions. zvlog_* used in ospf6d are deleted also.
1179 ** "terminal monitor" command is added. "no terminal monitor" is for
1180 disabling. This command simply display logging information to the
1183 ** dropline.[ch] files are deleted.
1187 ** BGP neighbor configuration are sorted by it's IP address.
1189 ** BGP peer configuration and actual peer is separated. This is
1190 preparation for Route Server support.
1192 ** "no neighbor PEER" command is added. You can delete neighbor
1193 without specifying AS number.
1195 ** "no neighbor ebgp-multihop" command is added.
1197 ** "no neighbor port PORT" command is added.
1199 ** To conform RFC1771, "neighbor PEER send-community" is default
1200 behavior. If you want to disable sending community attribute,
1201 please specify "no neighbor PEER send-community" to the peer.
1203 ** "neighbor maximum-prefix NUMBER" command is added.
1205 ** Multi-protocol extention NLRI is proceeded only when the peer is
1206 configured proper Address Family and Subsequent Address Family. If
1207 not, those NLRI are simply ignored.
1209 ** Aggregate-address support is improved. Currently below commands
1213 "aggregate-address summary-only"
1214 "no aggregate-address"
1215 "no aggregate-address summary-only"
1217 "ipv6 bgp aggregate-address"
1218 "ipv6 bgp aggregate-address summary-only"
1219 "no ipv6 bgp aggregate-address"
1220 "no ipv6 bgp aggregate-address summary-only"
1222 ** redistribute route-map bug is fixed.
1224 ** MBGP support becomes default. "configure" option --enable-mbgp is
1227 ** New command "neighbor PEER timers connect <1-65535>" is added.
1229 ** New command "neighbor PEER override-capability" is added.
1231 ** New command "show ip bgp neighbor A.B.C.D advertised-route" is added.
1233 ** New command "show ip bgp neighbor A.B.C.D routes" is added. To use
1234 this command, you have to configure neighbor with
1235 "neighbor A.B.C.D soft-reconfiguration inbound" beforehand.
1238 * Changes in zebra-0.83
1242 ** Serious bug fix about fetching global and link-local address at the
1243 same time. Due to this bug, corrupted IPv6 prefix is generated. If
1244 you uses bgpd for BGP-4+ please update to this version. The bug is
1245 introduced in zebra-0.82.
1247 ** When bgpd send Notify message, don't use thread manager. It is now
1248 send to neighbor immediately.
1250 * Changes in zebra-0.82
1252 ** Solaris 2.6 support is added by Michael Handler
1253 <handler@sub-rosa.com>.
1255 ** MBGP support is added by Robert Olsson <Robert.Olsson@data.slu.se>.
1256 Please specify --enable-mbgp to configure script. This option will be
1257 removed in the future and MBGP support will be default.
1261 ** When interface goes down, withdraw connected routes from routing
1262 table. When interface goes up, restore the routes to the routing
1265 ** `show interface' show interface's statistics on Linux and BSD with
1268 ** Now zebra can get MTU value on BSDI/OS.
1272 ** Add capability option support based upon
1273 draft-ietf-idr-bgp4-cap-neg-04.txt.
1275 ** Add `show ipv6 bgp prefix-list' command.
1277 ** Check self AS appeared in received routes.
1279 ** redistribute route-map support is added.
1281 ** BGP packet dump feature compatible with MRT.
1285 ** Fix bug of `timers basic' command's argument format.
1289 ** Calculate max RTE using interface's MTU value.
1293 ** Some correction to LSU processing.
1295 ** Add check for lsa->refresh_list.
1299 ** Many debug feature is added.
1301 * Changes in zebra-0.81
1303 ** SNMP support is disabled in default.--enable-snmp option is added
1304 to configure script.
1308 ** Fix FSM bug which introduced in zebra-0.80.
1310 * Changes in zebra-0.80
1314 New access-list name space `ipv6 access-list' is added. At the same
1315 time, `access-list' statemant only accepts IPv4 prefix. Please be
1316 careful if you use IPv6 filtering. You will need to change your
1317 configuration. For IPv6 filtering please use `ipv6 access-list'.
1319 As of zebra-0.7x, user can use `access-list' for both IPv4 and IPv6
1323 access-list DML-net permit 203.181.89.0/24
1324 access-list DML-net permit 3ffe:506::0/32
1325 access-list DML-net deny any
1328 Above configuration is not valid for zebra-08x. Please add `ipv6'
1329 before 'access-list' when you configure IPv6 filtering.
1332 access-list DML-net permit 203.181.89.0/24
1333 access-list DML-net deny any
1335 ipv6 access-list DML-net permit 3ffe:506::0/32
1336 ipv6 access-list DML-net deny any
1341 And also new prefix-list name space `ipv6 prefix-list' is added. It
1342 is the same as the change of `access-list'. `ip prefix-list' now only
1343 accept IPv4 prefix. It was source of confusion that `ip prefix-list'
1344 can be used both IPv4 and IPv6 filtering. Now name space is separated
1345 to clear the meaning of the filter.
1347 If you use `ip prefix-list' for IPv6 filtering, please change the
1351 ip prefix-list 6bone-filter seq 5 permit 3ffe::/17 le 24 ge 24
1352 ip prefix-list 6bone-filter seq 10 permit 3ffe:8000::/17 le 28 ge 28
1353 ip prefix-list 6bone-filter seq 12 deny 3ffe::/16
1354 ip prefix-list 6bone-filter seq 15 permit 2000::/3 le 16 ge 16
1355 ip prefix-list 6bone-filter seq 20 permit 2001::/16 le 35 ge 35
1356 ip prefix-list 6bone-filter seq 30 deny any
1359 Now user can explicitly configure it as IPv6 prefix-list.
1362 ipv6 prefix-list 6bone-filter seq 5 permit 3ffe::/17 le 24 ge 24
1363 ipv6 prefix-list 6bone-filter seq 10 permit 3ffe:8000::/17 le 28 ge 28
1364 ipv6 prefix-list 6bone-filter seq 12 deny 3ffe::/16
1365 ipv6 prefix-list 6bone-filter seq 15 permit 2000::/3 le 16 ge 16
1366 ipv6 prefix-list 6bone-filter seq 20 permit 2001::/16 le 35 ge 35
1367 ipv6 prefix-list 6bone-filter seq 30 deny any
1372 If you want to filter only default route (0.0.0.0/0) and permit other
1373 routes, it was hard to do that. Now `ip prefix-list' can be used for
1374 RIP route filtering.
1378 `distribute-list prefix PLIST_NAME (in|out) IFNAME'
1380 is added to ripd. So you can configure on eth0 interface accept all
1381 routes other than default routes.
1385 distribute-list prefix filter-default in eth0
1387 ip prefix-list filter-default deny 0.0.0.0/0 le 0
1388 ip prefix-list filter-default permit any
1391 * RIPng configuration
1393 Same change is done for ripngd. You can use `ipv6 prefix-list' for
1398 distribute-list prefix filter-default in eth0
1400 ipv6 prefix-list filter-default deny ::/0 le 0
1401 ipv6 prefix-list filter-default permit any
1406 So far, Multiprotocol Extensions for BGP-4 (RFC2283) configuration is
1407 done with traditional IPv4 peering statement like blow.
1411 neighbor 3ffe:506::1 remote-as 2500
1412 neighbor 3ffe:506::1 prefix-list 6bone-filter out
1415 For separating configuration IPv4 and IPv6, and for retaining Cisco
1416 configuration compatibility, now IPv6 configuration is done by IPv6
1417 specific statement. IPv6 BGP configuration is done by statement which
1418 start from `ipv6 bgp'.
1423 ipv6 bgp neighbor 3ffe:506::1 remote-as 2500
1424 ipv6 bgp neighbor 3ffe:506::1 prefix-list 6bone-filter out
1427 At the same time some IPv6 specific commands are deleted from IPv4
1430 o redistribute ripng
1431 o redistribute ospf6
1432 o neighbor PEER version BGP_VERSION
1433 o neighbor PEER interface IFNAME
1435 Those commands are only accepted as like below.
1437 o ipv6 bgp redistribute ripng
1438 o ipv6 bgp redistribute ospf6
1439 o ipv6 bgp neighbor PEER version BGP_VERSION
1440 o ipv6 bgp neighbor PEER interface IFNAME
1442 And below new commands are added.
1444 o ipv6 bgp network IPV6_PREFIX
1445 o ipv6 bgp redistribute static
1446 o ipv6 bgp redistribute connected
1447 o ipv6 bgp neighbor PEER remote-as <1-65535> [passive]
1448 o ipv6 bgp neighbor PEER ebgp-multihop [TTL]
1449 o ipv6 bgp neighbor PEER description DESCRIPTION
1450 o ipv6 bgp neighbor PEER shutdown
1451 o ipv6 bgp neighbor PEER route-reflector-client
1452 o ipv6 bgp neighbor PEER update-source IFNAME
1453 o ipv6 bgp neighbor PEER next-hop-self
1454 o ipv6 bgp neighbor PEER timers holdtime <0-65535>
1455 o ipv6 bgp neighbor PEER timers keepalive <0-65535>
1456 o ipv6 bgp neighbor PEER send-community
1457 o ipv6 bgp neighbor PEER weight <0-65535>
1458 o ipv6 bgp neighbor PEER default-originate
1459 o ipv6 bgp neighbor PEER filter-list FILTER_LIST_NAME (in|out)
1460 o ipv6 bgp neighbor PEER prefix-list PREFIX_LIST_NAME (in|out)
1461 o ipv6 bgp neighbor PEER distribute-list AS_LIST_NAME (in|out)
1462 o ipv6 bgp neighbor PEER route-map ROUTE_MAP_NAME (in|out)
1464 And some utility commands are introduced.
1466 o clear ipv6 bgp [PEER]
1467 o show ipv6 bgp neighbors [PEER]
1468 o show ipv6 bgp summary
1470 I hope these changes are easy to understand for current Zebra users...
1472 * To restrict connection to VTY interface.
1474 It used to be both IPv4 and IPv6 filter can be specified with one
1475 access-list. Then the access-list can be appried to VTY interface
1476 with `access-class' stetement in `line vty' node. Below is example in
1480 access-list local-only permit 127.0.0.1/32
1481 access-list local-only permit ::1/128
1482 access-list local-only deny any
1485 access-class local-only
1488 Now IPv4 and IPv6 filter have each name space. It is not possible to
1489 specify IPv4 and IPv6 filter with one access-list. For setting IPv6
1490 access-list in `line vty', `ipv6 access-class' statement is
1491 introduced. Let me show the configuration in zebra-0.8x.
1494 access-list local-only permit 127.0.0.1/32
1495 access-list local-only deny any
1497 ipv6 access-list local-only permit ::1/128
1498 ipv6 access-list local-only dny any
1501 access-class local-only
1502 ipv6 access-class local-only
1507 New IPv6 related route-map match commands are added.
1509 o match ipv6 address
1510 o match ipv6 next-hop
1512 Please change your configuration if you use IP match statement for
1518 access-list all permit any
1520 route-map set-nexthop permit 10
1521 match ip address all
1522 set ipv6 next-hop global 3ffe:506::1
1523 set ipv6 next-hop local fe80::cbb5:591a
1529 ipv6 access-list all permit any
1531 route-map set-nexthop permit 10
1532 match ipv6 address all
1533 set ipv6 next-hop global 3ffe:506::1
1534 set ipv6 next-hop local fe80::cbb5:591a
1539 Protocol daemon such as ripd, bgpd, ospfd will reconnect zebra daemon
1540 when the connection fail. Those daemons try to connect zebra every 10
1541 seconds first three trial, then the interval changed to 60 seconds.
1542 After all, if ten connections are fail, protocol daemon give up the
1543 connection to the zebra daemon.
1545 * SNMP support (is not yet finished)
1547 Zebra uses SMUX protocol (RFC1227) for making communication with SNMP
1548 agent. Currently lib/smux.c can be compiled only with ucd-snmp-4.0.1
1549 and http://ucd-snmp.ucdavis.edu/patches/012.patch. It can not be
1550 compiled with ucd-snmp-3.6.2.
1552 After applying the patch to ucd-snmp-4.0.1, please configure it with
1555 % configure --with-mib-modules=smux
1557 After compile & install ucd-snmp-4.0.1, you will need to configure
1558 smuxpeer. I'm now using below configuration.
1560 /usr/local/share/snmp/snmpd.conf
1561 ================================
1562 smuxpeer 1.3.6.1.6.3.1 test
1564 Above 1.3.6.1.6.3.1 and test is temporary configuration which is hard
1565 coded in lib/smux.c. Yes, I know it is bad, I'll change it ASAP.
1567 * HUP signal treatment
1569 From zebra-0.80, ripd will reload it's configuration file when ripd
1570 receives HUP signal. Other daemon such as bgpd, ospfd will support
1571 HUP signal treatment soon.
1573 * Changes in zebra-0.79
1577 ** Broadcast address setting on Linux box bug is fixed.
1579 ** Protocol daemon can install connected IPv6 route into the kernel.
1581 ** Now zebra can handle blackhole route.
1585 ** Add route-map feature for RIP protocol.
1587 ** In case of RIP version 2 routing table entry has IPv4 address and
1588 netmask pair which host part bit is on, ignore the entry.
1592 ** Change CMSG_DATA cast from (u_char *) to (int *). (u_char *) does
1593 not work for NetBSD-currnet on SparcStation 10.
1597 ** MaxAge LSA treatment is added.
1599 ** ABR/ASBR functionality is added.
1601 ** Virtual Link funtionality is added.
1603 ** ABR behaviors IBM/Cisco/Shortcut is added.
1607 ** Enclosed KAME specific part with #ifdef #endif
1609 * Changes in zebra-0.78
1613 ** SNMP support is started.
1615 ** Now Zebra can work on BSD/OS 4.X.
1617 ** Now Zebra can compiled on vanilla OpenBSD 2.5 but not yet working correcltly.
1621 ** Interface index detection using ioctl() bug is fixed.
1623 ** Interface information protocol is changed. Now interface
1624 addition/deletion and interface's address addition/deletion is
1629 ** BGP hold timer bug is fixed.
1631 ** BGP keepavlie timer becomes configurable.
1635 ** When making reply to rip's REQUEST message, fill in
1636 RIP_METRIC_INFINITY with network byte order using htonl ().
1638 ** Pass host byte order address to IN_CLASSC and IN_CLASSB macro.
1642 ** LSA flooding works.
1644 ** Fix bug of DD processing.
1646 ** Fix bug of originating router-LSA bug is fixed.
1648 ** LSA structure is changed to support LSA aging.
1652 ** `ip6' statement in configuration is changed to `ipv6'.
1654 * Changes in zebra-0.77
1658 ** SIGUSR1 reopen logging file.
1660 ** route-map is extended to support multi-protocol routing
1663 ** When compiling under GNU libc 2.1 environment don't use inet6-apps.
1667 ** Basic IPv6 router advertisement codes added. It is not yet usable.
1669 ** Fix IPv6 route addition/deletion bug is fixed.
1671 ** `show ip route A.B.C.D' works
1675 ** When invalid unfeasible routes length comes, bgpd send notify then
1676 continue to process the packet. Now bgpd stop parsing invalid packet
1677 then return to main loop.
1679 ** BGP-4+ withdrawn routes parse bug is fixed.
1681 ** When BGP-4+ information passed to non shared network's peer, trim
1682 link-local next-hop information.
1684 ** `no redistribute ROUTE_TYPE' withdraw installed routes from BGP
1685 routing information.
1687 ** `show ipv6 route IPV6ADDR' command added.
1689 ** BGP start timer has jitter.
1691 ** Holdtimer configuration bug is fixed. Now configuration does not
1692 show unconfigured hold time value.
1696 ** Now update timer (default 30 seconds) has +/- 50% jitter value.
1698 ** Add timers basic command.
1700 ** `network' configuration is dynamically reflected.
1702 ** `timers basic <update> <timeout> <garbage>' added.
1706 ** Reconstruct almost codes.
1708 ** `network' configuration is dynamically reflected.
1710 ** RIP timers now conforms to RFC2453. So user can configure update,
1711 timeout, garbage timer.
1713 ** `timers basic <update> <timeout> <garbage>' works.
1717 ** Bug of originating network LSA is fixed.
1719 ** `no router ospf' core dump bug is fixed.
1723 ** Redistribute route works.
1725 * Changes in zebra-0.76
1729 ** configure.in Linux IPv6 detection problem is fixed.
1731 ** Include SERVICES file to the distribution
1733 ** Update zebra.texi to zebra-0.76.
1735 * Changes in zebra-0.75
1739 ** `termnal length 0' bug is fixed.
1743 ** When zebra starts up, sweep all zebra installed routes. If -k or
1744 --keep_kernel option is specified to zebra dameon. This function is
1749 ** Aggreagte address command supported. In router ripngd,
1750 `aggregate-address IPV6PREFIX' works.
1754 ** Input route-map's bug which cause segmentation violation is fixed.
1756 ** route-map method improved.
1758 ** BGP-4+ nexthop detection improved.
1760 ** BGP-4+ route re-selection bug is fixed.
1762 ** BGP-4+ iBGP route's nexthop calculation works.
1764 ** After connection Established `show ip bgp neighbor' display BGP TCP
1765 connection's source and destination address.
1767 ** In case of BGP-4+ `show ip bgp neighbor' display BGP-4+ global and
1768 local nexthop which used for originated route. This address will be
1769 used when `next-hop-self'.
1773 ** Fix bug of DR election.
1775 ** Set IP precedence field with IPTOS_PREC_INTERNET_CONTROL.
1777 ** Schedule NeighborChange event if NSM status change.
1779 ** Never include a neighbor in Hello packet, when the neighbor goes
1782 * Changes in zebra-0.74
1786 ** Now `terminal length 0' means no line output control.
1788 ** `line LINES' command deleted. Instead of this please use `terminal
1791 ** `terminal length <0-512>' is each vty specific configuration so it
1792 can not be configured in the configuration file. If you want to
1793 configure system wide line control, please use `service
1794 terminal-length <0-512>'. This configuration affects to the all vty
1799 ** Installation of IPv6 route bug is fixed.
1803 ** Very serious bug of bgp_stop () is fixed. When multiple route to
1804 the same destination exist, bgpd try to announce the information to
1805 stopped peer. Then add orphan write thread is added. This cause
1806 many strange behavior of bgpd.
1808 ** Router-id parsing bug is fixed.
1810 ** With BGP-4+ nexthop installation was done with global address but
1811 it should be link-local address. This bug is fixed now.
1813 ** When incoming route-map prepend AS, old AS path remained. Now bgpd
1816 ** `neighbor PEER weight <0-65535>' command added.
1820 ** Almost codes are rewritten to conform to RFC2080.
1824 ** SPF calculation timer is added. Currently it is set to 30 seconds.
1826 ** SPF calculation works now.
1828 ** OSPF routing table codes are added.
1830 ** OSPF's internal routes installed into the kernel routing table.
1832 ** Now `ospfd' works as non-area, non-external route support OSPF
1835 ** Call of log_rotate() is removed.
1839 ** LSA data structure is changed.
1841 ** Call of log_rotate() is removed.
1843 * Changes in zebra-0.73
1847 ** `config terminal' is changed to `configure terminal'.
1849 ** `terminal length <0-512>' command is added.
1851 ** Variable length argument was specified by `...'. Now all strings
1852 started with character `.' is variable length argument.
1856 ** Internal route (such as iBGP, internal OSPF route) handling works
1859 ** In interface node, `ipv6 address' and `no ipv6 address' works.
1861 ** Interface's address remain after `no ip address' bug is fixed.
1863 ** Host route such as IPv4 with /32 mask and IPv6 with /128 mask
1864 didn't set RTF_GATEWAY even it has gateway. This bug if fixed now.
1868 ** `match as-path' argument is used to be specify AS PATH value itself
1869 directly (e.g. ^$). But it is changed to specify `ip as-apth
1872 ** iBGP route handle works without getting error from the kernel.
1874 ** `set aggregator as AS A.B.C.D' command is added to route-map.
1876 ** `set atomic-aggregate' command is added to bgpd's routemap.
1878 ** Announcement of atomic aggregate attribute and aggregator attribute
1881 ** `update-source' bug is fixed.
1883 ** When a route learned from eBGP is announced to iBGP, local
1884 preference was set to zero. But now it set to
1885 DEFAULT_LOCAL_PREF(100).
1889 ** RIPv1 route filter bug is fixed.
1891 ** Some memory leak is fixed.
1895 ** Fix bug of DR Election.
1897 ** Fix bug of adjacency forming.
1901 ** Clean up logging message.
1903 ** Reflect routing information to zebra daemon.
1905 * Changes in zebra-0.72
1909 ** When getsockname return IPv4 mapped IPv6 address. Convert it to
1914 ** Change route-map's next-hop related settings.
1916 set ip nexthop -> set ip next-hop
1917 set ipv6 nexthop global -> set ipv6 next-hop global
1918 set ipv6 nexthop local -> set ipv6 next-hop local
1920 ** Add `next-hop-self' command.
1924 ** Fix bug of multiple `network area' directive crashes.
1926 * Changes in zebra-0.71
1930 ** `log syslog' command is added.
1932 ** Use getaddrinfo function to bind IPv4/IPv6 server socket.
1934 ** `no banner motd' will suppress motd output when user connect to VTY.
1936 ** Bind `quit' command to major nodes.
1940 ** Point-to-point link address handling bug is fixed.
1944 ** AS path validity check is added. If malformed AS path is received
1945 NOTIFY Malformed AS path is send to the peer.
1947 ** Use getaddrinfo function to bind IPv4/IPv6 server socket.
1951 ** Connected network announcement bug is fixed.
1953 ** `broadcast' command is deleted.
1955 ** `network' command is added.
1957 ** `neighbor' command is added.
1959 ** `redistribute' command is added.
1961 ** `timers basic' command is added.
1963 ** `route' command is added.
1967 ** Fix metric calculation bug.
1971 ** Check sum bug is fixed.
1975 ** Routing table code is rewritten.
1977 * Changes in zebra-0.70
1981 ** Critical routing information base calculation bug check is fixed.
1983 ** zebra ipv4 message is extended to support external/internal route
1986 ** Now if internal route doesn't has direct connected nexthop, then
1987 nexthop is calculated by looking up IGP routing table.
1991 ** `neighbor PEER update-source IFNAME' command added as ALIAS to
1992 `neighbor PEER interface IFNAME'.
1996 ** DD null pointer bug is fixed.
1998 * Changes in zebra-0.69
2002 ** zebra redistirbution supports dynamic notification of the route
2003 change. If you add static route while running zebra, it will be
2004 reflected to other protocol daemon which set `redistribute static'.
2006 ** If static route installation is failed due to the error. The
2007 static route is not added to the configuration and zebra routing
2010 ** zebra sets forwarding flag to on when it starts up.
2012 ** `no ip forwarding' turn off IPv4 forwarding.
2014 ** `no ipv6 forwarding' turn off IPv6 forwarding.
2016 ** Change `show ipforward' command to `show ip forwarding'.
2018 ** Change `show ipv6forward' command to `show ipv6 forwarding'.
2020 ** `ip route A.B.C.D/M INTERFACE' works. So you can set `ip route
2025 ** `neighbor PEER send-community' command is added. If the option is
2026 set, bgpd will send community attribute to the peer.
2028 ** When a BGP route has no-export community attribute and
2029 send-community is set to the peer, the route is not announced to the
2034 ** When ripngd terminates, delete all installed route.
2036 ** `redistribute static', `redistribute connected' works.
2038 ** Change `debug ripng event' to `debug ripng events'.
2040 ** Change `show debug ripng' to `show debugging ripng'.
2042 ** Bug of static route deletion is fixed.
2046 ** LS request and LS update can be send and received.
2048 * Changes in zebra-0.68
2052 ** DEFUN() is extended to support (a|b|c) statement.
2054 ** Input buffer overflow bug is fixed.
2058 ** `ip community-list' is added.
2060 ** set community and match community is added to route-map statement.
2062 ** aggregate-address A.B.C.D/M partly works. Now it works only
2067 ** IPv6 network address delete bug is fixed.
2071 ** DR election bug fixed.
2073 ** Now Database Description can be send or received.
2075 ** Neighbor State Machine goes to Full state.
2079 ** router zebra related bug is fixed.
2081 * Changes in zebra-0.67
2085 ** `service password-encryption' is added for encrypted password.
2089 ** `set as-path prepend ASPATH' is added to route-map command.
2091 ** `set weight WEIGHT' is added to route-map command.
2093 ** `no set ipv6 nexthop global' and `no set ipv6 nexthop local'
2094 command is added to route-map.
2096 ** `neighbor IP_ADDR version BGP_VERSION' command's BGP_VERSION
2100 =====================
2104 =====================
2106 If you want to peer with old draft version of BGP-4+, please configure
2110 neighbor PEER version 4-
2112 ** Some AS path isn't correctly compared during route selection. Now
2117 ** `router zebra' is default behavior.
2121 ** `router zebra' is default behavior.
2123 * Changes in zebra-0.66
2127 ** When other daemon such as gated install routes into the kernel then
2128 zebra blocks. This is only occur with netlink socket. Now socket is
2129 set as NONBLOCKING and problem is fixed. Reported and fixed by
2130 Patrick Koppen <koppen@rhrk.uni-kl.de>
2134 ** Now `router zebra' is not needed to insert BGP routes into the
2135 kernel. It is default behavior. If you don't want to install the BGP
2136 routes to the kernel, please configure like below:
2143 ** redistribute connected works.
2145 ** redistribute static now filter local loopback routes and link local
2150 ** Some network check is added. Patch is done by Carlos Alberto
2151 Barcenilla <barce@frlp.utn.edu.ar>
2155 ** Sometimes ripngd install wrong nexthop into the kernel. This bug
2158 ** Now `router zebra' is not needed to insert RIPng routes into the
2159 kernel. It is default behavior. If you don't want to install the BGP
2160 routes to the kernel, please configure like below:
2164 no redistribute ripng
2167 * Changes in zebra-0.65
2171 ** `C-c' changes current node to ENABLE_NODE. Previously it doesn't.
2173 ** In ENABLE_NODE, `exit' command close vty connection.
2175 ** `service advanced-vty' enable advanced vty function. If this
2176 service is specified one can directly connect to ENABLE_NODE when
2177 enable password is not set.
2179 ** `lines LINES' command is added by Stephen R. van den Berg
2184 ** Basic Linux policy based routing table support is added by Stephen
2185 R. van den Berg <srb@cuci.nl>.
2189 ** route-map command is improved:
2190 `match ip next-hop': New command.
2191 `match metric': New command.
2192 `set metric': Doc fixed.
2193 `set local-preference': DEFUN added.
2197 ** Check of announced network is added. Now multicast address is
2198 filtered. Reported by Carlos Alberto Barcenilla
2199 <barce@frlp.utn.edu.ar>
2201 ** Check of network 127 is added. Reported by Carlos Alberto
2202 Barcenilla <barce@frlp.utn.edu.ar>
2206 ** Aging route bug is fixed.
2208 ** `router zebra' semantics changed. ripngd automatically connect to
2213 ** `no router ospf' works.
2217 ** Bug fix about network vertex.
2219 * Changes in zebra-0.64.1.
2221 This is bug fix release.
2225 ** Add check of sin6_scope_id in struct sockaddr_in6. For compilation
2226 on implementation which doesn't have sin6_scope_id. Reported by Wim
2227 Biemolt <Wim.Biemolt@ipv6.surfnet.nl>.
2231 ** Fix bug of display BGP routes as "O" instead of "B". Reported by
2232 "William F. Maton" <wmaton@enterprise.ic.gc.ca> and Dave Hartzell
2233 <hartzell@greatplains.net>.
2237 ** `no network IPV6_NETWORK' statement and `no neighbor IP_ADDR timers
2238 holdtime [TIMER]' statement doesn't work. Reported by Georg Hitsch
2239 <georg@atnet.at>. Now both statement work.
2243 ** Last interface is not updated by ospf_if_update(). Reported by
2244 Dave Hartzell <hartzell@greatplains.net>.
2248 ** Byte order of ifid is changed. Due to this change, this code will
2249 not work with previous version, sorry.
2251 ** Fix `show ip route' route type mismatch.
2253 ** Fix bug of no network IPV6_NETWORK.
2255 ** Important bug fix about intra-area-prefix-lsa.
2257 * Changes in zebra-0.64.
2261 ** prefix-list based filtering routine is added. Currently used in
2262 bgpd but it will be in other daemons.
2266 ** `no router bgp' works. But network statement is not cleared. This
2267 should be fixed in next beta.
2269 ** Route reflector related statement is added.
2272 bgp cluster-id a.b.c.d
2273 neighbor a.b.c.d route-reflector-client
2277 ** Prefix list based filtering is added.
2280 neighbor a.b.c.d prefix-list PREFIX_LIST_NAME
2282 ** Prefix list based routing display works.
2284 show ip bgp prefix-list PREFIX_LIST_NAME
2288 ** Fix route metric check bug. Reported from Mr. Carlos Alberto
2293 ** There are many changes. If you have interested in ospf6d please
2294 visit ospf6d/README file.
2296 * Changes in zebra-0.63 first beta package.
2300 ** `copy running-config stgartup-config' command is added.
2302 ** prefix length check bug is fixed. Thanks Marlos Barcenilla
2303 <barce@frip.utn.edu.ar>.
2307 ** DR and BDR election works.
2309 ** OSPF Hello simple authentication works.
2313 ** Now ospf6d can be compiled on both Linux and *BSD system.
2315 * Changes in zebra-19990420 snapshot
2317 ** `make dist' at top directory works now.
2321 ** VTY has now access-class to restrict remote connection.
2322 Implemented by Alex Bligh <amb@gxn.net>.
2326 access-class ACCESS-LIST-NAME
2329 ** `show version' command added. Implemented by Carlos Alberto
2330 Barcenilla <barce@frlp.utn.edu.ar>
2334 ** `ip address' command on *BSD bug is fixed.
2336 ** `no ip address' works now for IPv4 address.
2338 ** Now `write terminal' display `ip address' configuration.
2342 ** Redistribute static works now. Please run both zebra and bgpd.
2343 bgpd.conf should be like this:
2349 redisitribute static
2354 ** configure --enable-guile turns on zebra-guile build.
2356 ** (router-bgp ASN) allocates real bgp structre.
2358 * Changes in zebra-19990416 snapshot
2360 ** Set version to 0.60 for preparation of beta release.
2362 ** New directory guile is added for linking with guile interpreter.
2366 ** On GNU/Linux Kernel 2.2.x (with netlink support), zebra detects
2367 asynchronous routing updates. *BSD support is not yet finished.
2371 ** `show ip bgp regexp ASPATH_REGEX' uses CISCO like regular expression
2372 instead of RPSL like regular expression. I'm planing to provide RPSL
2373 like regular expression with `show ip bgp rpsl' or something.
2377 ** Press '?' at variable mandatory argument, vty prints nothing. Now
2378 vty outputs description about the argument. Fixed by Alex Bligh
2381 ** buffer.c has some ugly bugs. Due to the bug, vty interface hangs
2382 when large output date exists. This bug is fixed. Reported by Alex
2383 Bligh <amb@gxn.net>.
2387 ** DR and BDR information is shown by `show ip ospf interface' command.
2389 * Changes in zebra-19990408 snapshot
2393 ** Old BGP-4+ specification (described in old draft) treatment bug is
2394 fixed. It seems that mrtd uses this format as default. So if you
2395 have problem peering with mrtd and want to use old draft format please
2396 use version statement like this.
2398 neighbor PEER_ADDRESS remote-as ASN
2399 neighbor PEER_ADDRESS version bgp4+-draft-00
2401 ** When AS path is epmty (routes generated by bgpd), SEGV is occur
2402 when announce the routes to eBGP peer. Reported by
2403 kad@gibson.skif.net.
2405 ** ip as-path access-list command is added.
2407 ** neighbor PEER_ADDRESS filter-list AS_LIST [in|out] command is added.
2409 ** neighbor PEER_ADDRESS timers holdtimer TIMER command is added.
2411 * Changes in all daemons
2413 ** With KAME stack, terminal interface is now bind AF_INET socket
2414 instead of AF_INET6 one.
2416 * Changes in zebra-19990403 snapshot
2420 ** When bgpd has 'router zebra', bgpd automatically select it's router
2421 ID as most highest interface's IP Address.
2423 ** When AS path is empty (in case of iBGP), it doesn't include any AS
2424 segment. This change is for announcement to gated under iBGP.
2428 ** OSPF hello packet send/receive works.
2432 ** Yasuhiro Ohara's ospf6d codes is imported. It is under development
2433 and can't be compiled on any platform.
2435 * Changes in zebra-19990327 snapshot
2439 ** When BGP-4+ connection is done by IPv6 link-local address. One
2440 have to specify interface index for the connection. So I've added
2441 interface statement to the neighbor commmand. Please specify
2442 interface name for getting interface index like below. This statement
2443 only works on GNU/Linux. I'll support BSD ASAP.
2446 neighbor fe80::200:f8ff:fe01:5fd3 remote-as 2500
2447 neighbor fe80::200:f8ff:fe01:5fd3 interface sit3
2449 ** For disable BGP peering `shutdown' command is added.
2452 neighbor 10.0.0.1 shutdown
2454 ** `description' command is added to neighbor statement.
2457 neighbor 10.0.0.1 description peering with Norway.
2459 ** `show ip bgp regexp AS-REGEXP' works again.
2461 show ip bgp regexp AS7675
2463 will show routes which include AS7675.
2465 ** When a route which is made from `network' statement is send to
2466 neighbor. Set it's nexthop to self. So 10.0.0.0/8 is announced to
2467 the peer A with source address 192.168.1.1. The routes nexthop is set
2472 ** In zebra/rtread_sysctl.c, function rtm_read() may overrun allocated
2473 buffer when the address family is not supported and the length is big
2474 (i.e link address). Reported Achim Patzner <ap@bnc.net>.
2478 ** Now ospfd receive OSPF packet.
2480 * Changes in zebra-19990319 snapshot
2482 * Changes in configuration and libraries
2484 ** User can disable IPv6 feature and/or pthread feature by configure
2487 To disable IPv6: configure --disable-ipv6
2488 To disable pthread: configure --disable-pthread
2490 ** User can disable specified daemon by configure option.
2492 Don't make zebra: configure --disable-zebra
2493 Don't make bgpd: configure --disable-bgpd
2494 Don't make ripd: configure --disable-ripd
2495 Don't make ripngd: configure --disable-ripngd
2496 Don't make ospfd: configure --disable-ospfd
2497 Don't make ospf6d: configure --disable-ospf6d
2499 ** Sample configuration files are installed as 600 file flag.
2500 Suggested by Jeroen Ruigrok/Asmodai <asmodai@wxs.nl>.
2502 ** syslog logging feature is added by Peter Galbavy
2503 <Peter.Galbavy@knowledge.com>
2505 ** Inclusion of standard header files is reworked by Peter Galbavy
2506 <Peter.Galbavy@knowledge.com>
2508 ** Change description from GNU/Linux 2.1.X to GNU/Linux 2.2.X
2510 ** If daemon function exists in standard C library use it.
2512 ** To generate configure script we upgrade autoconf to 2.13. To
2513 generate Makefile.in we upgrade automake to 1.4.
2515 ** doc/texinfo.tex is added to distribution.
2517 ** Update ports/pkg/DESCR description.
2519 ** Update doc/zebra.texi.
2521 ** logfile FILENAME statement deleted. Instead of that please use log
2528 ** Communication between zebra and bgpd works now. So if there is
2529 `router zebra' line in bgpd.conf, selected route is installed
2530 into kernel routing table.
2532 ** Delete all routes which inserted by bgpd when bgpd dies. If you
2533 want to retain routes even bgpd dies please specify [-r|--retain]
2536 ** BGP announcement code is reworked. Now bgpd announce selected
2537 routes to other peer.
2539 ** All output bgp packet is buffered. It's written to the socket when
2542 ** Output route-map works now. You can specify output route-map by:
2544 neighbor IP_ADDR route-map ROUTE_MAP_NAME out
2546 ** New route-map command added.
2548 set ip nexthop IP_ADDR
2549 set ipv6 nexthop global IP_ADDR
2551 ** Fix bug about unlock of the route_node structure.
2553 ** BGP-4+ support is added. bgpd can listen and speak BGP-4+ packet
2554 specified in RFC2283. You can view IPv6 bgp table by: `show ipv6 bgp'.
2556 ** Meny packet overflow check is added.
2564 ** ospfd work is started by Toshiaki Takada <takada@zebra.org>. Now
2565 several files are included in ospfd directory.
2567 ** ospf6d codes are merged from Yasuhiro Ohara <yasu@sfc.wide.ad.jp>'s
2568 ospfd work. Now codes are located in ospf6d directory.
2573 paragraph-separate: "[ ]*$"