]>
git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - arch/alpha/kernel/core_lca.c
2 * linux/arch/alpha/kernel/core_lca.c
4 * Written by David Mosberger (davidm@cs.arizona.edu) with some code
5 * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
8 * Code common to all LCA core logic chips.
11 #define __EXTERN_INLINE inline
13 #include <asm/core_lca.h>
14 #undef __EXTERN_INLINE
16 #include <linux/types.h>
17 #include <linux/pci.h>
18 #include <linux/init.h>
19 #include <linux/tty.h>
21 #include <asm/ptrace.h>
22 #include <asm/irq_regs.h>
30 * BIOS32-style PCI interface:
34 * Machine check reasons. Defined according to PALcode sources
35 * (osf.h and platform.h).
37 #define MCHK_K_TPERR 0x0080
38 #define MCHK_K_TCPERR 0x0082
39 #define MCHK_K_HERR 0x0084
40 #define MCHK_K_ECC_C 0x0086
41 #define MCHK_K_ECC_NC 0x0088
42 #define MCHK_K_UNKNOWN 0x008A
43 #define MCHK_K_CACKSOFT 0x008C
44 #define MCHK_K_BUGCHECK 0x008E
45 #define MCHK_K_OS_BUGCHECK 0x0090
46 #define MCHK_K_DCPERR 0x0092
47 #define MCHK_K_ICPERR 0x0094
51 * Platform-specific machine-check reasons:
53 #define MCHK_K_SIO_SERR 0x204 /* all platforms so far */
54 #define MCHK_K_SIO_IOCHK 0x206 /* all platforms so far */
55 #define MCHK_K_DCSR 0x208 /* all but Noname */
59 * Given a bus, device, and function number, compute resulting
60 * configuration space address and setup the LCA_IOC_CONF register
61 * accordingly. It is therefore not safe to have concurrent
62 * invocations to configuration space access routines, but there
63 * really shouldn't be any need for this.
67 * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
68 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
69 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
70 * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
71 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
73 * 31:11 Device select bit.
74 * 10:8 Function number
79 * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
80 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
81 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
82 * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
83 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
86 * 23:16 bus number (8 bits = 128 possible buses)
87 * 15:11 Device number (5 bits)
88 * 10:8 function number
92 * The function number selects which function of a multi-function device
93 * (e.g., SCSI and Ethernet).
95 * The register selects a DWORD (32 bit) register offset. Hence it
96 * doesn't get shifted by 2 bits as we want to "drop" the bottom two
101 mk_conf_addr(struct pci_bus
*pbus
, unsigned int device_fn
, int where
,
102 unsigned long *pci_addr
)
105 u8 bus
= pbus
->number
;
108 int device
= device_fn
>> 3;
109 int func
= device_fn
& 0x7;
111 /* Type 0 configuration cycle. */
117 *(vulp
)LCA_IOC_CONF
= 0;
118 addr
= (1 << (11 + device
)) | (func
<< 8) | where
;
120 /* Type 1 configuration cycle. */
121 *(vulp
)LCA_IOC_CONF
= 1;
122 addr
= (bus
<< 16) | (device_fn
<< 8) | where
;
129 conf_read(unsigned long addr
)
131 unsigned long flags
, code
, stat0
;
134 local_irq_save(flags
);
136 /* Reset status register to avoid losing errors. */
137 stat0
= *(vulp
)LCA_IOC_STAT0
;
138 *(vulp
)LCA_IOC_STAT0
= stat0
;
141 /* Access configuration space. */
145 stat0
= *(vulp
)LCA_IOC_STAT0
;
146 if (stat0
& LCA_IOC_STAT0_ERR
) {
147 code
= ((stat0
>> LCA_IOC_STAT0_CODE_SHIFT
)
148 & LCA_IOC_STAT0_CODE_MASK
);
150 printk("lca.c:conf_read: got stat0=%lx\n", stat0
);
153 /* Reset error status. */
154 *(vulp
)LCA_IOC_STAT0
= stat0
;
157 /* Reset machine check. */
162 local_irq_restore(flags
);
167 conf_write(unsigned long addr
, unsigned int value
)
169 unsigned long flags
, code
, stat0
;
171 local_irq_save(flags
); /* avoid getting hit by machine check */
173 /* Reset status register to avoid losing errors. */
174 stat0
= *(vulp
)LCA_IOC_STAT0
;
175 *(vulp
)LCA_IOC_STAT0
= stat0
;
178 /* Access configuration space. */
182 stat0
= *(vulp
)LCA_IOC_STAT0
;
183 if (stat0
& LCA_IOC_STAT0_ERR
) {
184 code
= ((stat0
>> LCA_IOC_STAT0_CODE_SHIFT
)
185 & LCA_IOC_STAT0_CODE_MASK
);
187 printk("lca.c:conf_write: got stat0=%lx\n", stat0
);
190 /* Reset error status. */
191 *(vulp
)LCA_IOC_STAT0
= stat0
;
194 /* Reset machine check. */
197 local_irq_restore(flags
);
201 lca_read_config(struct pci_bus
*bus
, unsigned int devfn
, int where
,
202 int size
, u32
*value
)
204 unsigned long addr
, pci_addr
;
208 if (mk_conf_addr(bus
, devfn
, where
, &pci_addr
))
209 return PCIBIOS_DEVICE_NOT_FOUND
;
211 shift
= (where
& 3) * 8;
212 mask
= (size
- 1) * 8;
213 addr
= (pci_addr
<< 5) + mask
+ LCA_CONF
;
214 *value
= conf_read(addr
) >> (shift
);
215 return PCIBIOS_SUCCESSFUL
;
219 lca_write_config(struct pci_bus
*bus
, unsigned int devfn
, int where
, int size
,
222 unsigned long addr
, pci_addr
;
225 if (mk_conf_addr(bus
, devfn
, where
, &pci_addr
))
226 return PCIBIOS_DEVICE_NOT_FOUND
;
228 mask
= (size
- 1) * 8;
229 addr
= (pci_addr
<< 5) + mask
+ LCA_CONF
;
230 conf_write(addr
, value
<< ((where
& 3) * 8));
231 return PCIBIOS_SUCCESSFUL
;
234 struct pci_ops lca_pci_ops
=
236 .read
= lca_read_config
,
237 .write
= lca_write_config
,
241 lca_pci_tbi(struct pci_controller
*hose
, dma_addr_t start
, dma_addr_t end
)
244 *(vulp
)LCA_IOC_TBIA
= 0;
251 struct pci_controller
*hose
;
254 * Create our single hose.
257 pci_isa_hose
= hose
= alloc_pci_controller();
258 hose
->io_space
= &ioport_resource
;
259 hose
->mem_space
= &iomem_resource
;
262 hose
->sparse_mem_base
= LCA_SPARSE_MEM
- IDENT_ADDR
;
263 hose
->dense_mem_base
= LCA_DENSE_MEM
- IDENT_ADDR
;
264 hose
->sparse_io_base
= LCA_IO
- IDENT_ADDR
;
265 hose
->dense_io_base
= 0;
268 * Set up the PCI to main memory translation windows.
270 * Mimic the SRM settings for the direct-map window.
271 * Window 0 is scatter-gather 8MB at 8MB (for isa).
272 * Window 1 is direct access 1GB at 1GB.
274 * Note that we do not try to save any of the DMA window CSRs
275 * before setting them, since we cannot read those CSRs on LCA.
277 hose
->sg_isa
= iommu_arena_new(hose
, 0x00800000, 0x00800000, 0);
279 __direct_map_base
= 0x40000000;
280 __direct_map_size
= 0x40000000;
282 *(vulp
)LCA_IOC_W_BASE0
= hose
->sg_isa
->dma_base
| (3UL << 32);
283 *(vulp
)LCA_IOC_W_MASK0
= (hose
->sg_isa
->size
- 1) & 0xfff00000;
284 *(vulp
)LCA_IOC_T_BASE0
= virt_to_phys(hose
->sg_isa
->ptes
);
286 *(vulp
)LCA_IOC_W_BASE1
= __direct_map_base
| (2UL << 32);
287 *(vulp
)LCA_IOC_W_MASK1
= (__direct_map_size
- 1) & 0xfff00000;
288 *(vulp
)LCA_IOC_T_BASE1
= 0;
290 *(vulp
)LCA_IOC_TB_ENA
= 0x80;
292 lca_pci_tbi(hose
, 0, -1);
295 * Disable PCI parity for now. The NCR53c810 chip has
296 * troubles meeting the PCI spec which results in
297 * data parity errors.
299 *(vulp
)LCA_IOC_PAR_DIS
= 1UL<<5;
302 * Finally, set up for restoring the correct HAE if using SRM.
303 * Again, since we cannot read many of the CSRs on the LCA,
304 * one of which happens to be the HAE, we save the value that
305 * the SRM will expect...
308 srm_hae
= 0x80000000UL
;
312 * Constants used during machine-check handling. I suppose these
313 * could be moved into lca.h but I don't see much reason why anybody
314 * else would want to use them.
317 #define ESR_EAV (1UL<< 0) /* error address valid */
318 #define ESR_CEE (1UL<< 1) /* correctable error */
319 #define ESR_UEE (1UL<< 2) /* uncorrectable error */
320 #define ESR_WRE (1UL<< 3) /* write-error */
321 #define ESR_SOR (1UL<< 4) /* error source */
322 #define ESR_CTE (1UL<< 7) /* cache-tag error */
323 #define ESR_MSE (1UL<< 9) /* multiple soft errors */
324 #define ESR_MHE (1UL<<10) /* multiple hard errors */
325 #define ESR_NXM (1UL<<12) /* non-existent memory */
327 #define IOC_ERR ( 1<<4) /* ioc logs an error */
328 #define IOC_CMD_SHIFT 0
329 #define IOC_CMD (0xf<<IOC_CMD_SHIFT)
330 #define IOC_CODE_SHIFT 8
331 #define IOC_CODE (0xf<<IOC_CODE_SHIFT)
332 #define IOC_LOST ( 1<<5)
333 #define IOC_P_NBR ((__u32) ~((1<<13) - 1))
336 mem_error(unsigned long esr
, unsigned long ear
)
338 printk(" %s %s error to %s occurred at address %x\n",
339 ((esr
& ESR_CEE
) ? "Correctable" :
340 (esr
& ESR_UEE
) ? "Uncorrectable" : "A"),
341 (esr
& ESR_WRE
) ? "write" : "read",
342 (esr
& ESR_SOR
) ? "memory" : "b-cache",
343 (unsigned) (ear
& 0x1ffffff8));
345 printk(" A b-cache tag parity error was detected.\n");
348 printk(" Several other correctable errors occurred.\n");
351 printk(" Several other uncorrectable errors occurred.\n");
354 printk(" Attempted to access non-existent memory.\n");
359 ioc_error(__u32 stat0
, __u32 stat1
)
361 static const char * const pci_cmd
[] = {
362 "Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
363 "Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
364 "Rsvd4", "Configuration Read", "Configuration Write",
365 "Memory Read Multiple", "Dual Address", "Memory Read Line",
366 "Memory Write and Invalidate"
368 static const char * const err_name
[] = {
369 "exceeded retry limit", "no device", "bad data parity",
370 "target abort", "bad address parity", "page table read error",
371 "invalid page", "data error"
373 unsigned code
= (stat0
& IOC_CODE
) >> IOC_CODE_SHIFT
;
374 unsigned cmd
= (stat0
& IOC_CMD
) >> IOC_CMD_SHIFT
;
376 printk(" %s initiated PCI %s cycle to address %x"
377 " failed due to %s.\n",
378 code
> 3 ? "PCI" : "CPU", pci_cmd
[cmd
], stat1
, err_name
[code
]);
380 if (code
== 5 || code
== 6) {
381 printk(" (Error occurred at PCI memory address %x.)\n",
382 (stat0
& ~IOC_P_NBR
));
384 if (stat0
& IOC_LOST
) {
385 printk(" Other PCI errors occurred simultaneously.\n");
390 lca_machine_check(unsigned long vector
, unsigned long la_ptr
)
395 el
.c
= (struct el_common
*) la_ptr
;
397 wrmces(rdmces()); /* reset machine check pending flag */
399 printk(KERN_CRIT
"LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
400 vector
, get_irq_regs()->pc
, (unsigned int) el
.c
->code
);
403 * The first quadword after the common header always seems to
404 * be the machine check reason---don't know why this isn't
405 * part of the common header instead. In the case of a long
406 * logout frame, the upper 32 bits is the machine check
407 * revision level, which we ignore for now.
409 switch ((unsigned int) el
.c
->code
) {
410 case MCHK_K_TPERR
: reason
= "tag parity error"; break;
411 case MCHK_K_TCPERR
: reason
= "tag control parity error"; break;
412 case MCHK_K_HERR
: reason
= "access to non-existent memory"; break;
413 case MCHK_K_ECC_C
: reason
= "correctable ECC error"; break;
414 case MCHK_K_ECC_NC
: reason
= "non-correctable ECC error"; break;
415 case MCHK_K_CACKSOFT
: reason
= "MCHK_K_CACKSOFT"; break;
416 case MCHK_K_BUGCHECK
: reason
= "illegal exception in PAL mode"; break;
417 case MCHK_K_OS_BUGCHECK
: reason
= "callsys in kernel mode"; break;
418 case MCHK_K_DCPERR
: reason
= "d-cache parity error"; break;
419 case MCHK_K_ICPERR
: reason
= "i-cache parity error"; break;
420 case MCHK_K_SIO_SERR
: reason
= "SIO SERR occurred on PCI bus"; break;
421 case MCHK_K_SIO_IOCHK
: reason
= "SIO IOCHK occurred on ISA bus"; break;
422 case MCHK_K_DCSR
: reason
= "MCHK_K_DCSR"; break;
424 default: reason
= "unknown"; break;
427 switch (el
.c
->size
) {
428 case sizeof(struct el_lca_mcheck_short
):
430 " Reason: %s (short frame%s, dc_stat=%#lx):\n",
431 reason
, el
.c
->retry
? ", retryable" : "",
433 if (el
.s
->esr
& ESR_EAV
) {
434 mem_error(el
.s
->esr
, el
.s
->ear
);
436 if (el
.s
->ioc_stat0
& IOC_ERR
) {
437 ioc_error(el
.s
->ioc_stat0
, el
.s
->ioc_stat1
);
441 case sizeof(struct el_lca_mcheck_long
):
442 printk(KERN_CRIT
" Reason: %s (long frame%s):\n",
443 reason
, el
.c
->retry
? ", retryable" : "");
445 " reason: %#lx exc_addr: %#lx dc_stat: %#lx\n",
446 el
.l
->pt
[0], el
.l
->exc_addr
, el
.l
->dc_stat
);
447 printk(KERN_CRIT
" car: %#lx\n", el
.l
->car
);
448 if (el
.l
->esr
& ESR_EAV
) {
449 mem_error(el
.l
->esr
, el
.l
->ear
);
451 if (el
.l
->ioc_stat0
& IOC_ERR
) {
452 ioc_error(el
.l
->ioc_stat0
, el
.l
->ioc_stat1
);
457 printk(KERN_CRIT
" Unknown errorlog size %d\n", el
.c
->size
);
460 /* Dump the logout area to give all info. */
461 #ifdef CONFIG_VERBOSE_MCHECK
462 if (alpha_verbose_mcheck
> 1) {
463 unsigned long * ptr
= (unsigned long *) la_ptr
;
465 for (i
= 0; i
< el
.c
->size
/ sizeof(long); i
+= 2) {
466 printk(KERN_CRIT
" +%8lx %016lx %016lx\n",
467 i
*sizeof(long), ptr
[i
], ptr
[i
+1]);
470 #endif /* CONFIG_VERBOSE_MCHECK */
474 * The following routines are needed to support the SPEED changing
475 * necessary to successfully manage the thermal problem on the AlphaBook1.
479 lca_clock_print(void)
483 pmr_reg
= LCA_READ_PMR
;
485 printk("Status of clock control:\n");
486 printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg
));
487 printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg
));
488 printk("\tInterrupt override is %s\n",
489 (pmr_reg
& LCA_PMR_INTO
) ? "on" : "off");
490 printk("\tDMA override is %s\n",
491 (pmr_reg
& LCA_PMR_DMAO
) ? "on" : "off");
500 pmr_reg
= LCA_READ_PMR
;
501 return(LCA_GET_PRIMARY(pmr_reg
));
506 lca_clock_fiddle(int divisor
)
510 pmr_reg
= LCA_READ_PMR
;
511 LCA_SET_PRIMARY_CLOCK(pmr_reg
, divisor
);
512 /* lca_norm_clock = divisor; */
513 LCA_WRITE_PMR(pmr_reg
);