]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - arch/arc/mm/init.c
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
[mirror_ubuntu-artful-kernel.git] / arch / arc / mm / init.c
1 /*
2 * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9 #include <linux/kernel.h>
10 #include <linux/mm.h>
11 #include <linux/bootmem.h>
12 #include <linux/memblock.h>
13 #ifdef CONFIG_BLK_DEV_INITRD
14 #include <linux/initrd.h>
15 #endif
16 #include <linux/of_fdt.h>
17 #include <linux/swap.h>
18 #include <linux/module.h>
19 #include <linux/highmem.h>
20 #include <asm/page.h>
21 #include <asm/pgalloc.h>
22 #include <asm/sections.h>
23 #include <asm/arcregs.h>
24
25 pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
26 char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
27 EXPORT_SYMBOL(empty_zero_page);
28
29 static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE;
30 static unsigned long low_mem_sz;
31
32 #ifdef CONFIG_HIGHMEM
33 static unsigned long min_high_pfn, max_high_pfn;
34 static u64 high_mem_start;
35 static u64 high_mem_sz;
36 #endif
37
38 #ifdef CONFIG_DISCONTIGMEM
39 struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
40 EXPORT_SYMBOL(node_data);
41 #endif
42
43 long __init arc_get_mem_sz(void)
44 {
45 return low_mem_sz;
46 }
47
48 /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
49 static int __init setup_mem_sz(char *str)
50 {
51 low_mem_sz = memparse(str, NULL) & PAGE_MASK;
52
53 /* early console might not be setup yet - it will show up later */
54 pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
55
56 return 0;
57 }
58 early_param("mem", setup_mem_sz);
59
60 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
61 {
62 int in_use = 0;
63
64 if (!low_mem_sz) {
65 if (base != low_mem_start)
66 panic("CONFIG_LINUX_LINK_BASE != DT memory { }");
67
68 low_mem_sz = size;
69 in_use = 1;
70 } else {
71 #ifdef CONFIG_HIGHMEM
72 high_mem_start = base;
73 high_mem_sz = size;
74 in_use = 1;
75 #endif
76 }
77
78 pr_info("Memory @ %llx [%lldM] %s\n",
79 base, TO_MB(size), !in_use ? "Not used":"");
80 }
81
82 #ifdef CONFIG_BLK_DEV_INITRD
83 static int __init early_initrd(char *p)
84 {
85 unsigned long start, size;
86 char *endp;
87
88 start = memparse(p, &endp);
89 if (*endp == ',') {
90 size = memparse(endp + 1, NULL);
91
92 initrd_start = (unsigned long)__va(start);
93 initrd_end = (unsigned long)__va(start + size);
94 }
95 return 0;
96 }
97 early_param("initrd", early_initrd);
98 #endif
99
100 /*
101 * First memory setup routine called from setup_arch()
102 * 1. setup swapper's mm @init_mm
103 * 2. Count the pages we have and setup bootmem allocator
104 * 3. zone setup
105 */
106 void __init setup_arch_memory(void)
107 {
108 unsigned long zones_size[MAX_NR_ZONES];
109 unsigned long zones_holes[MAX_NR_ZONES];
110
111 init_mm.start_code = (unsigned long)_text;
112 init_mm.end_code = (unsigned long)_etext;
113 init_mm.end_data = (unsigned long)_edata;
114 init_mm.brk = (unsigned long)_end;
115
116 /* first page of system - kernel .vector starts here */
117 min_low_pfn = ARCH_PFN_OFFSET;
118
119 /* Last usable page of low mem */
120 max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
121
122 #ifdef CONFIG_FLATMEM
123 /* pfn_valid() uses this */
124 max_mapnr = max_low_pfn - min_low_pfn;
125 #endif
126
127 /*------------- bootmem allocator setup -----------------------*/
128
129 /*
130 * seed the bootmem allocator after any DT memory node parsing or
131 * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
132 *
133 * Only low mem is added, otherwise we have crashes when allocating
134 * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
135 * avail memory, ending in highmem with a > 32-bit address. However
136 * it then tries to memset it with a truncaed 32-bit handle, causing
137 * the crash
138 */
139
140 memblock_add_node(low_mem_start, low_mem_sz, 0);
141 memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
142
143 #ifdef CONFIG_BLK_DEV_INITRD
144 if (initrd_start)
145 memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
146 #endif
147
148 early_init_fdt_reserve_self();
149 early_init_fdt_scan_reserved_mem();
150
151 memblock_dump_all();
152
153 /*----------------- node/zones setup --------------------------*/
154 memset(zones_size, 0, sizeof(zones_size));
155 memset(zones_holes, 0, sizeof(zones_holes));
156
157 zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
158 zones_holes[ZONE_NORMAL] = 0;
159
160 /*
161 * We can't use the helper free_area_init(zones[]) because it uses
162 * PAGE_OFFSET to compute the @min_low_pfn which would be wrong
163 * when our kernel doesn't start at PAGE_OFFSET, i.e.
164 * PAGE_OFFSET != CONFIG_LINUX_LINK_BASE
165 */
166 free_area_init_node(0, /* node-id */
167 zones_size, /* num pages per zone */
168 min_low_pfn, /* first pfn of node */
169 zones_holes); /* holes */
170
171 #ifdef CONFIG_HIGHMEM
172 /*
173 * Populate a new node with highmem
174 *
175 * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
176 * than addresses in normal ala low memory (0x8000_0000 based).
177 * Even with PAE, the huge peripheral space hole would waste a lot of
178 * mem with single mem_map[]. This warrants a mem_map per region design.
179 * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
180 *
181 * DISCONTIGMEM in turns requires multiple nodes. node 0 above is
182 * populated with normal memory zone while node 1 only has highmem
183 */
184 node_set_online(1);
185
186 min_high_pfn = PFN_DOWN(high_mem_start);
187 max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
188
189 zones_size[ZONE_NORMAL] = 0;
190 zones_holes[ZONE_NORMAL] = 0;
191
192 zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
193 zones_holes[ZONE_HIGHMEM] = 0;
194
195 free_area_init_node(1, /* node-id */
196 zones_size, /* num pages per zone */
197 min_high_pfn, /* first pfn of node */
198 zones_holes); /* holes */
199
200 high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
201 kmap_init();
202 #endif
203 }
204
205 /*
206 * mem_init - initializes memory
207 *
208 * Frees up bootmem
209 * Calculates and displays memory available/used
210 */
211 void __init mem_init(void)
212 {
213 #ifdef CONFIG_HIGHMEM
214 unsigned long tmp;
215
216 reset_all_zones_managed_pages();
217 for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
218 free_highmem_page(pfn_to_page(tmp));
219 #endif
220
221 free_all_bootmem();
222 mem_init_print_info(NULL);
223 }
224
225 /*
226 * free_initmem: Free all the __init memory.
227 */
228 void __ref free_initmem(void)
229 {
230 free_initmem_default(-1);
231 }
232
233 #ifdef CONFIG_BLK_DEV_INITRD
234 void __init free_initrd_mem(unsigned long start, unsigned long end)
235 {
236 free_reserved_area((void *)start, (void *)end, -1, "initrd");
237 }
238 #endif