]> git.proxmox.com Git - mirror_ubuntu-jammy-kernel.git/blob - arch/arm/boot/compressed/head.S
projects / mirror_ubuntu-jammy-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
[mirror_ubuntu-jammy-kernel.git] / arch / arm / boot / compressed / head.S
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * linux/arch/arm/boot/compressed/head.S
4 *
5 * Copyright (C) 1996-2002 Russell King
6 * Copyright (C) 2004 Hyok S. Choi (MPU support)
7 */
8 #include <linux/linkage.h>
9 #include <asm/assembler.h>
10 #include <asm/v7m.h>
11
12 #include "efi-header.S"
13
14 AR_CLASS( .arch armv7-a )
15 M_CLASS( .arch armv7-m )
16
17 /*
18 * Debugging stuff
19 *
20 * Note that these macros must not contain any code which is not
21 * 100% relocatable. Any attempt to do so will result in a crash.
22 * Please select one of the following when turning on debugging.
23 */
24 #ifdef DEBUG
25
26 #if defined(CONFIG_DEBUG_ICEDCC)
27
28 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
29 .macro loadsp, rb, tmp1, tmp2
30 .endm
31 .macro writeb, ch, rb
32 mcr p14, 0, \ch, c0, c5, 0
33 .endm
34 #elif defined(CONFIG_CPU_XSCALE)
35 .macro loadsp, rb, tmp1, tmp2
36 .endm
37 .macro writeb, ch, rb
38 mcr p14, 0, \ch, c8, c0, 0
39 .endm
40 #else
41 .macro loadsp, rb, tmp1, tmp2
42 .endm
43 .macro writeb, ch, rb
44 mcr p14, 0, \ch, c1, c0, 0
45 .endm
46 #endif
47
48 #else
49
50 #include CONFIG_DEBUG_LL_INCLUDE
51
52 .macro writeb, ch, rb
53 senduart \ch, \rb
54 .endm
55
56 #if defined(CONFIG_ARCH_SA1100)
57 .macro loadsp, rb, tmp1, tmp2
58 mov \rb, #0x80000000 @ physical base address
59 #ifdef CONFIG_DEBUG_LL_SER3
60 add \rb, \rb, #0x00050000 @ Ser3
61 #else
62 add \rb, \rb, #0x00010000 @ Ser1
63 #endif
64 .endm
65 #else
66 .macro loadsp, rb, tmp1, tmp2
67 addruart \rb, \tmp1, \tmp2
68 .endm
69 #endif
70 #endif
71 #endif
72
73 .macro kputc,val
74 mov r0, \val
75 bl putc
76 .endm
77
78 .macro kphex,val,len
79 mov r0, \val
80 mov r1, #\len
81 bl phex
82 .endm
83
84 .macro debug_reloc_start
85 #ifdef DEBUG
86 kputc #'\n'
87 kphex r6, 8 /* processor id */
88 kputc #':'
89 kphex r7, 8 /* architecture id */
90 #ifdef CONFIG_CPU_CP15
91 kputc #':'
92 mrc p15, 0, r0, c1, c0
93 kphex r0, 8 /* control reg */
94 #endif
95 kputc #'\n'
96 kphex r5, 8 /* decompressed kernel start */
97 kputc #'-'
98 kphex r9, 8 /* decompressed kernel end */
99 kputc #'>'
100 kphex r4, 8 /* kernel execution address */
101 kputc #'\n'
102 #endif
103 .endm
104
105 .macro debug_reloc_end
106 #ifdef DEBUG
107 kphex r5, 8 /* end of kernel */
108 kputc #'\n'
109 mov r0, r4
110 bl memdump /* dump 256 bytes at start of kernel */
111 #endif
112 .endm
113
114 /*
115 * Debug kernel copy by printing the memory addresses involved
116 */
117 .macro dbgkc, begin, end, cbegin, cend
118 #ifdef DEBUG
119 kputc #'\n'
120 kputc #'C'
121 kputc #':'
122 kputc #'0'
123 kputc #'x'
124 kphex \begin, 8 /* Start of compressed kernel */
125 kputc #'-'
126 kputc #'0'
127 kputc #'x'
128 kphex \end, 8 /* End of compressed kernel */
129 kputc #'-'
130 kputc #'>'
131 kputc #'0'
132 kputc #'x'
133 kphex \cbegin, 8 /* Start of kernel copy */
134 kputc #'-'
135 kputc #'0'
136 kputc #'x'
137 kphex \cend, 8 /* End of kernel copy */
138 kputc #'\n'
139 kputc #'\r'
140 #endif
141 .endm
142
143 .section ".start", #alloc, #execinstr
144 /*
145 * sort out different calling conventions
146 */
147 .align
148 /*
149 * Always enter in ARM state for CPUs that support the ARM ISA.
150 * As of today (2014) that's exactly the members of the A and R
151 * classes.
152 */
153 AR_CLASS( .arm )
154 start:
155 .type start,#function
156 .rept 7
157 __nop
158 .endr
159 #ifndef CONFIG_THUMB2_KERNEL
160 mov r0, r0
161 #else
162 AR_CLASS( sub pc, pc, #3 ) @ A/R: switch to Thumb2 mode
163 M_CLASS( nop.w ) @ M: already in Thumb2 mode
164 .thumb
165 #endif
166 W(b) 1f
167
168 .word _magic_sig @ Magic numbers to help the loader
169 .word _magic_start @ absolute load/run zImage address
170 .word _magic_end @ zImage end address
171 .word 0x04030201 @ endianness flag
172 .word 0x45454545 @ another magic number to indicate
173 .word _magic_table @ additional data table
174
175 __EFI_HEADER
176 1:
177 ARM_BE8( setend be ) @ go BE8 if compiled for BE8
178 AR_CLASS( mrs r9, cpsr )
179 #ifdef CONFIG_ARM_VIRT_EXT
180 bl __hyp_stub_install @ get into SVC mode, reversibly
181 #endif
182 mov r7, r1 @ save architecture ID
183 mov r8, r2 @ save atags pointer
184
185 #ifndef CONFIG_CPU_V7M
186 /*
187 * Booting from Angel - need to enter SVC mode and disable
188 * FIQs/IRQs (numeric definitions from angel arm.h source).
189 * We only do this if we were in user mode on entry.
190 */
191 mrs r2, cpsr @ get current mode
192 tst r2, #3 @ not user?
193 bne not_angel
194 mov r0, #0x17 @ angel_SWIreason_EnterSVC
195 ARM( swi 0x123456 ) @ angel_SWI_ARM
196 THUMB( svc 0xab ) @ angel_SWI_THUMB
197 not_angel:
198 safe_svcmode_maskall r0
199 msr spsr_cxsf, r9 @ Save the CPU boot mode in
200 @ SPSR
201 #endif
202 /*
203 * Note that some cache flushing and other stuff may
204 * be needed here - is there an Angel SWI call for this?
205 */
206
207 /*
208 * some architecture specific code can be inserted
209 * by the linker here, but it should preserve r7, r8, and r9.
210 */
211
212 .text
213
214 #ifdef CONFIG_AUTO_ZRELADDR
215 /*
216 * Find the start of physical memory. As we are executing
217 * without the MMU on, we are in the physical address space.
218 * We just need to get rid of any offset by aligning the
219 * address.
220 *
221 * This alignment is a balance between the requirements of
222 * different platforms - we have chosen 128MB to allow
223 * platforms which align the start of their physical memory
224 * to 128MB to use this feature, while allowing the zImage
225 * to be placed within the first 128MB of memory on other
226 * platforms. Increasing the alignment means we place
227 * stricter alignment requirements on the start of physical
228 * memory, but relaxing it means that we break people who
229 * are already placing their zImage in (eg) the top 64MB
230 * of this range.
231 */
232 mov r4, pc
233 and r4, r4, #0xf8000000
234 /* Determine final kernel image address. */
235 add r4, r4, #TEXT_OFFSET
236 #else
237 ldr r4, =zreladdr
238 #endif
239
240 /*
241 * Set up a page table only if it won't overwrite ourself.
242 * That means r4 < pc || r4 - 16k page directory > &_end.
243 * Given that r4 > &_end is most unfrequent, we add a rough
244 * additional 1MB of room for a possible appended DTB.
245 */
246 mov r0, pc
247 cmp r0, r4
248 ldrcc r0, LC0+32
249 addcc r0, r0, pc
250 cmpcc r4, r0
251 orrcc r4, r4, #1 @ remember we skipped cache_on
252 blcs cache_on
253
254 restart: adr r0, LC0
255 ldmia r0, {r1, r2, r3, r6, r10, r11, r12}
256 ldr sp, [r0, #28]
257
258 /*
259 * We might be running at a different address. We need
260 * to fix up various pointers.
261 */
262 sub r0, r0, r1 @ calculate the delta offset
263 add r6, r6, r0 @ _edata
264 add r10, r10, r0 @ inflated kernel size location
265
266 /*
267 * The kernel build system appends the size of the
268 * decompressed kernel at the end of the compressed data
269 * in little-endian form.
270 */
271 ldrb r9, [r10, #0]
272 ldrb lr, [r10, #1]
273 orr r9, r9, lr, lsl #8
274 ldrb lr, [r10, #2]
275 ldrb r10, [r10, #3]
276 orr r9, r9, lr, lsl #16
277 orr r9, r9, r10, lsl #24
278
279 #ifndef CONFIG_ZBOOT_ROM
280 /* malloc space is above the relocated stack (64k max) */
281 add sp, sp, r0
282 add r10, sp, #0x10000
283 #else
284 /*
285 * With ZBOOT_ROM the bss/stack is non relocatable,
286 * but someone could still run this code from RAM,
287 * in which case our reference is _edata.
288 */
289 mov r10, r6
290 #endif
291
292 mov r5, #0 @ init dtb size to 0
293 #ifdef CONFIG_ARM_APPENDED_DTB
294 /*
295 * r0 = delta
296 * r2 = BSS start
297 * r3 = BSS end
298 * r4 = final kernel address (possibly with LSB set)
299 * r5 = appended dtb size (still unknown)
300 * r6 = _edata
301 * r7 = architecture ID
302 * r8 = atags/device tree pointer
303 * r9 = size of decompressed image
304 * r10 = end of this image, including bss/stack/malloc space if non XIP
305 * r11 = GOT start
306 * r12 = GOT end
307 * sp = stack pointer
308 *
309 * if there are device trees (dtb) appended to zImage, advance r10 so that the
310 * dtb data will get relocated along with the kernel if necessary.
311 */
312
313 ldr lr, [r6, #0]
314 #ifndef __ARMEB__
315 ldr r1, =0xedfe0dd0 @ sig is 0xd00dfeed big endian
316 #else
317 ldr r1, =0xd00dfeed
318 #endif
319 cmp lr, r1
320 bne dtb_check_done @ not found
321
322 #ifdef CONFIG_ARM_ATAG_DTB_COMPAT
323 /*
324 * OK... Let's do some funky business here.
325 * If we do have a DTB appended to zImage, and we do have
326 * an ATAG list around, we want the later to be translated
327 * and folded into the former here. No GOT fixup has occurred
328 * yet, but none of the code we're about to call uses any
329 * global variable.
330 */
331
332 /* Get the initial DTB size */
333 ldr r5, [r6, #4]
334 #ifndef __ARMEB__
335 /* convert to little endian */
336 eor r1, r5, r5, ror #16
337 bic r1, r1, #0x00ff0000
338 mov r5, r5, ror #8
339 eor r5, r5, r1, lsr #8
340 #endif
341 /* 50% DTB growth should be good enough */
342 add r5, r5, r5, lsr #1
343 /* preserve 64-bit alignment */
344 add r5, r5, #7
345 bic r5, r5, #7
346 /* clamp to 32KB min and 1MB max */
347 cmp r5, #(1 << 15)
348 movlo r5, #(1 << 15)
349 cmp r5, #(1 << 20)
350 movhi r5, #(1 << 20)
351 /* temporarily relocate the stack past the DTB work space */
352 add sp, sp, r5
353
354 stmfd sp!, {r0-r3, ip, lr}
355 mov r0, r8
356 mov r1, r6
357 mov r2, r5
358 bl atags_to_fdt
359
360 /*
361 * If returned value is 1, there is no ATAG at the location
362 * pointed by r8. Try the typical 0x100 offset from start
363 * of RAM and hope for the best.
364 */
365 cmp r0, #1
366 sub r0, r4, #TEXT_OFFSET
367 bic r0, r0, #1
368 add r0, r0, #0x100
369 mov r1, r6
370 mov r2, r5
371 bleq atags_to_fdt
372
373 ldmfd sp!, {r0-r3, ip, lr}
374 sub sp, sp, r5
375 #endif
376
377 mov r8, r6 @ use the appended device tree
378
379 /*
380 * Make sure that the DTB doesn't end up in the final
381 * kernel's .bss area. To do so, we adjust the decompressed
382 * kernel size to compensate if that .bss size is larger
383 * than the relocated code.
384 */
385 ldr r5, =_kernel_bss_size
386 adr r1, wont_overwrite
387 sub r1, r6, r1
388 subs r1, r5, r1
389 addhi r9, r9, r1
390
391 /* Get the current DTB size */
392 ldr r5, [r6, #4]
393 #ifndef __ARMEB__
394 /* convert r5 (dtb size) to little endian */
395 eor r1, r5, r5, ror #16
396 bic r1, r1, #0x00ff0000
397 mov r5, r5, ror #8
398 eor r5, r5, r1, lsr #8
399 #endif
400
401 /* preserve 64-bit alignment */
402 add r5, r5, #7
403 bic r5, r5, #7
404
405 /* relocate some pointers past the appended dtb */
406 add r6, r6, r5
407 add r10, r10, r5
408 add sp, sp, r5
409 dtb_check_done:
410 #endif
411
412 /*
413 * Check to see if we will overwrite ourselves.
414 * r4 = final kernel address (possibly with LSB set)
415 * r9 = size of decompressed image
416 * r10 = end of this image, including bss/stack/malloc space if non XIP
417 * We basically want:
418 * r4 - 16k page directory >= r10 -> OK
419 * r4 + image length <= address of wont_overwrite -> OK
420 * Note: the possible LSB in r4 is harmless here.
421 */
422 add r10, r10, #16384
423 cmp r4, r10
424 bhs wont_overwrite
425 add r10, r4, r9
426 adr r9, wont_overwrite
427 cmp r10, r9
428 bls wont_overwrite
429
430 /*
431 * Relocate ourselves past the end of the decompressed kernel.
432 * r6 = _edata
433 * r10 = end of the decompressed kernel
434 * Because we always copy ahead, we need to do it from the end and go
435 * backward in case the source and destination overlap.
436 */
437 /*
438 * Bump to the next 256-byte boundary with the size of
439 * the relocation code added. This avoids overwriting
440 * ourself when the offset is small.
441 */
442 add r10, r10, #((reloc_code_end - restart + 256) & ~255)
443 bic r10, r10, #255
444
445 /* Get start of code we want to copy and align it down. */
446 adr r5, restart
447 bic r5, r5, #31
448
449 /* Relocate the hyp vector base if necessary */
450 #ifdef CONFIG_ARM_VIRT_EXT
451 mrs r0, spsr
452 and r0, r0, #MODE_MASK
453 cmp r0, #HYP_MODE
454 bne 1f
455
456 /*
457 * Compute the address of the hyp vectors after relocation.
458 * This requires some arithmetic since we cannot directly
459 * reference __hyp_stub_vectors in a PC-relative way.
460 * Call __hyp_set_vectors with the new address so that we
461 * can HVC again after the copy.
462 */
463 0: adr r0, 0b
464 movw r1, #:lower16:__hyp_stub_vectors - 0b
465 movt r1, #:upper16:__hyp_stub_vectors - 0b
466 add r0, r0, r1
467 sub r0, r0, r5
468 add r0, r0, r10
469 bl __hyp_set_vectors
470 1:
471 #endif
472
473 sub r9, r6, r5 @ size to copy
474 add r9, r9, #31 @ rounded up to a multiple
475 bic r9, r9, #31 @ ... of 32 bytes
476 add r6, r9, r5
477 add r9, r9, r10
478
479 #ifdef DEBUG
480 sub r10, r6, r5
481 sub r10, r9, r10
482 /*
483 * We are about to copy the kernel to a new memory area.
484 * The boundaries of the new memory area can be found in
485 * r10 and r9, whilst r5 and r6 contain the boundaries
486 * of the memory we are going to copy.
487 * Calling dbgkc will help with the printing of this
488 * information.
489 */
490 dbgkc r5, r6, r10, r9
491 #endif
492
493 1: ldmdb r6!, {r0 - r3, r10 - r12, lr}
494 cmp r6, r5
495 stmdb r9!, {r0 - r3, r10 - r12, lr}
496 bhi 1b
497
498 /* Preserve offset to relocated code. */
499 sub r6, r9, r6
500
501 #ifndef CONFIG_ZBOOT_ROM
502 /* cache_clean_flush may use the stack, so relocate it */
503 add sp, sp, r6
504 #endif
505
506 bl cache_clean_flush
507
508 badr r0, restart
509 add r0, r0, r6
510 mov pc, r0
511
512 wont_overwrite:
513 /*
514 * If delta is zero, we are running at the address we were linked at.
515 * r0 = delta
516 * r2 = BSS start
517 * r3 = BSS end
518 * r4 = kernel execution address (possibly with LSB set)
519 * r5 = appended dtb size (0 if not present)
520 * r7 = architecture ID
521 * r8 = atags pointer
522 * r11 = GOT start
523 * r12 = GOT end
524 * sp = stack pointer
525 */
526 orrs r1, r0, r5
527 beq not_relocated
528
529 add r11, r11, r0
530 add r12, r12, r0
531
532 #ifndef CONFIG_ZBOOT_ROM
533 /*
534 * If we're running fully PIC === CONFIG_ZBOOT_ROM = n,
535 * we need to fix up pointers into the BSS region.
536 * Note that the stack pointer has already been fixed up.
537 */
538 add r2, r2, r0
539 add r3, r3, r0
540
541 /*
542 * Relocate all entries in the GOT table.
543 * Bump bss entries to _edata + dtb size
544 */
545 1: ldr r1, [r11, #0] @ relocate entries in the GOT
546 add r1, r1, r0 @ This fixes up C references
547 cmp r1, r2 @ if entry >= bss_start &&
548 cmphs r3, r1 @ bss_end > entry
549 addhi r1, r1, r5 @ entry += dtb size
550 str r1, [r11], #4 @ next entry
551 cmp r11, r12
552 blo 1b
553
554 /* bump our bss pointers too */
555 add r2, r2, r5
556 add r3, r3, r5
557
558 #else
559
560 /*
561 * Relocate entries in the GOT table. We only relocate
562 * the entries that are outside the (relocated) BSS region.
563 */
564 1: ldr r1, [r11, #0] @ relocate entries in the GOT
565 cmp r1, r2 @ entry < bss_start ||
566 cmphs r3, r1 @ _end < entry
567 addlo r1, r1, r0 @ table. This fixes up the
568 str r1, [r11], #4 @ C references.
569 cmp r11, r12
570 blo 1b
571 #endif
572
573 not_relocated: mov r0, #0
574 1: str r0, [r2], #4 @ clear bss
575 str r0, [r2], #4
576 str r0, [r2], #4
577 str r0, [r2], #4
578 cmp r2, r3
579 blo 1b
580
581 /*
582 * Did we skip the cache setup earlier?
583 * That is indicated by the LSB in r4.
584 * Do it now if so.
585 */
586 tst r4, #1
587 bic r4, r4, #1
588 blne cache_on
589
590 /*
591 * The C runtime environment should now be setup sufficiently.
592 * Set up some pointers, and start decompressing.
593 * r4 = kernel execution address
594 * r7 = architecture ID
595 * r8 = atags pointer
596 */
597 mov r0, r4
598 mov r1, sp @ malloc space above stack
599 add r2, sp, #0x10000 @ 64k max
600 mov r3, r7
601 bl decompress_kernel
602 bl cache_clean_flush
603 bl cache_off
604
605 #ifdef CONFIG_ARM_VIRT_EXT
606 mrs r0, spsr @ Get saved CPU boot mode
607 and r0, r0, #MODE_MASK
608 cmp r0, #HYP_MODE @ if not booted in HYP mode...
609 bne __enter_kernel @ boot kernel directly
610
611 adr r12, .L__hyp_reentry_vectors_offset
612 ldr r0, [r12]
613 add r0, r0, r12
614
615 bl __hyp_set_vectors
616 __HVC(0) @ otherwise bounce to hyp mode
617
618 b . @ should never be reached
619
620 .align 2
621 .L__hyp_reentry_vectors_offset: .long __hyp_reentry_vectors - .
622 #else
623 b __enter_kernel
624 #endif
625
626 .align 2
627 .type LC0, #object
628 LC0: .word LC0 @ r1
629 .word __bss_start @ r2
630 .word _end @ r3
631 .word _edata @ r6
632 .word input_data_end - 4 @ r10 (inflated size location)
633 .word _got_start @ r11
634 .word _got_end @ ip
635 .word .L_user_stack_end @ sp
636 .word _end - restart + 16384 + 1024*1024
637 .size LC0, . - LC0
638
639 #ifdef CONFIG_ARCH_RPC
640 .globl params
641 params: ldr r0, =0x10000100 @ params_phys for RPC
642 mov pc, lr
643 .ltorg
644 .align
645 #endif
646
647 /*
648 * Turn on the cache. We need to setup some page tables so that we
649 * can have both the I and D caches on.
650 *
651 * We place the page tables 16k down from the kernel execution address,
652 * and we hope that nothing else is using it. If we're using it, we
653 * will go pop!
654 *
655 * On entry,
656 * r4 = kernel execution address
657 * r7 = architecture number
658 * r8 = atags pointer
659 * On exit,
660 * r0, r1, r2, r3, r9, r10, r12 corrupted
661 * This routine must preserve:
662 * r4, r7, r8
663 */
664 .align 5
665 cache_on: mov r3, #8 @ cache_on function
666 b call_cache_fn
667
668 /*
669 * Initialize the highest priority protection region, PR7
670 * to cover all 32bit address and cacheable and bufferable.
671 */
672 __armv4_mpu_cache_on:
673 mov r0, #0x3f @ 4G, the whole
674 mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
675 mcr p15, 0, r0, c6, c7, 1
676
677 mov r0, #0x80 @ PR7
678 mcr p15, 0, r0, c2, c0, 0 @ D-cache on
679 mcr p15, 0, r0, c2, c0, 1 @ I-cache on
680 mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
681
682 mov r0, #0xc000
683 mcr p15, 0, r0, c5, c0, 1 @ I-access permission
684 mcr p15, 0, r0, c5, c0, 0 @ D-access permission
685
686 mov r0, #0
687 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
688 mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
689 mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
690 mrc p15, 0, r0, c1, c0, 0 @ read control reg
691 @ ...I .... ..D. WC.M
692 orr r0, r0, #0x002d @ .... .... ..1. 11.1
693 orr r0, r0, #0x1000 @ ...1 .... .... ....
694
695 mcr p15, 0, r0, c1, c0, 0 @ write control reg
696
697 mov r0, #0
698 mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
699 mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
700 mov pc, lr
701
702 __armv3_mpu_cache_on:
703 mov r0, #0x3f @ 4G, the whole
704 mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
705
706 mov r0, #0x80 @ PR7
707 mcr p15, 0, r0, c2, c0, 0 @ cache on
708 mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
709
710 mov r0, #0xc000
711 mcr p15, 0, r0, c5, c0, 0 @ access permission
712
713 mov r0, #0
714 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
715 /*
716 * ?? ARMv3 MMU does not allow reading the control register,
717 * does this really work on ARMv3 MPU?
718 */
719 mrc p15, 0, r0, c1, c0, 0 @ read control reg
720 @ .... .... .... WC.M
721 orr r0, r0, #0x000d @ .... .... .... 11.1
722 /* ?? this overwrites the value constructed above? */
723 mov r0, #0
724 mcr p15, 0, r0, c1, c0, 0 @ write control reg
725
726 /* ?? invalidate for the second time? */
727 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
728 mov pc, lr
729
730 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
731 #define CB_BITS 0x08
732 #else
733 #define CB_BITS 0x0c
734 #endif
735
736 __setup_mmu: sub r3, r4, #16384 @ Page directory size
737 bic r3, r3, #0xff @ Align the pointer
738 bic r3, r3, #0x3f00
739 /*
740 * Initialise the page tables, turning on the cacheable and bufferable
741 * bits for the RAM area only.
742 */
743 mov r0, r3
744 mov r9, r0, lsr #18
745 mov r9, r9, lsl #18 @ start of RAM
746 add r10, r9, #0x10000000 @ a reasonable RAM size
747 mov r1, #0x12 @ XN|U + section mapping
748 orr r1, r1, #3 << 10 @ AP=11
749 add r2, r3, #16384
750 1: cmp r1, r9 @ if virt > start of RAM
751 cmphs r10, r1 @ && end of RAM > virt
752 bic r1, r1, #0x1c @ clear XN|U + C + B
753 orrlo r1, r1, #0x10 @ Set XN|U for non-RAM
754 orrhs r1, r1, r6 @ set RAM section settings
755 str r1, [r0], #4 @ 1:1 mapping
756 add r1, r1, #1048576
757 teq r0, r2
758 bne 1b
759 /*
760 * If ever we are running from Flash, then we surely want the cache
761 * to be enabled also for our execution instance... We map 2MB of it
762 * so there is no map overlap problem for up to 1 MB compressed kernel.
763 * If the execution is in RAM then we would only be duplicating the above.
764 */
765 orr r1, r6, #0x04 @ ensure B is set for this
766 orr r1, r1, #3 << 10
767 mov r2, pc
768 mov r2, r2, lsr #20
769 orr r1, r1, r2, lsl #20
770 add r0, r3, r2, lsl #2
771 str r1, [r0], #4
772 add r1, r1, #1048576
773 str r1, [r0]
774 mov pc, lr
775 ENDPROC(__setup_mmu)
776
777 @ Enable unaligned access on v6, to allow better code generation
778 @ for the decompressor C code:
779 __armv6_mmu_cache_on:
780 mrc p15, 0, r0, c1, c0, 0 @ read SCTLR
781 bic r0, r0, #2 @ A (no unaligned access fault)
782 orr r0, r0, #1 << 22 @ U (v6 unaligned access model)
783 mcr p15, 0, r0, c1, c0, 0 @ write SCTLR
784 b __armv4_mmu_cache_on
785
786 __arm926ejs_mmu_cache_on:
787 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
788 mov r0, #4 @ put dcache in WT mode
789 mcr p15, 7, r0, c15, c0, 0
790 #endif
791
792 __armv4_mmu_cache_on:
793 mov r12, lr
794 #ifdef CONFIG_MMU
795 mov r6, #CB_BITS | 0x12 @ U
796 bl __setup_mmu
797 mov r0, #0
798 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
799 mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
800 mrc p15, 0, r0, c1, c0, 0 @ read control reg
801 orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
802 orr r0, r0, #0x0030
803 ARM_BE8( orr r0, r0, #1 << 25 ) @ big-endian page tables
804 bl __common_mmu_cache_on
805 mov r0, #0
806 mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
807 #endif
808 mov pc, r12
809
810 __armv7_mmu_cache_on:
811 mov r12, lr
812 #ifdef CONFIG_MMU
813 mrc p15, 0, r11, c0, c1, 4 @ read ID_MMFR0
814 tst r11, #0xf @ VMSA
815 movne r6, #CB_BITS | 0x02 @ !XN
816 blne __setup_mmu
817 mov r0, #0
818 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
819 tst r11, #0xf @ VMSA
820 mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
821 #endif
822 mrc p15, 0, r0, c1, c0, 0 @ read control reg
823 bic r0, r0, #1 << 28 @ clear SCTLR.TRE
824 orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
825 orr r0, r0, #0x003c @ write buffer
826 bic r0, r0, #2 @ A (no unaligned access fault)
827 orr r0, r0, #1 << 22 @ U (v6 unaligned access model)
828 @ (needed for ARM1176)
829 #ifdef CONFIG_MMU
830 ARM_BE8( orr r0, r0, #1 << 25 ) @ big-endian page tables
831 mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg
832 orrne r0, r0, #1 @ MMU enabled
833 movne r1, #0xfffffffd @ domain 0 = client
834 bic r6, r6, #1 << 31 @ 32-bit translation system
835 bic r6, r6, #(7 << 0) | (1 << 4) @ use only ttbr0
836 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
837 mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
838 mcrne p15, 0, r6, c2, c0, 2 @ load ttb control
839 #endif
840 mcr p15, 0, r0, c7, c5, 4 @ ISB
841 mcr p15, 0, r0, c1, c0, 0 @ load control register
842 mrc p15, 0, r0, c1, c0, 0 @ and read it back
843 mov r0, #0
844 mcr p15, 0, r0, c7, c5, 4 @ ISB
845 mov pc, r12
846
847 __fa526_cache_on:
848 mov r12, lr
849 mov r6, #CB_BITS | 0x12 @ U
850 bl __setup_mmu
851 mov r0, #0
852 mcr p15, 0, r0, c7, c7, 0 @ Invalidate whole cache
853 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
854 mcr p15, 0, r0, c8, c7, 0 @ flush UTLB
855 mrc p15, 0, r0, c1, c0, 0 @ read control reg
856 orr r0, r0, #0x1000 @ I-cache enable
857 bl __common_mmu_cache_on
858 mov r0, #0
859 mcr p15, 0, r0, c8, c7, 0 @ flush UTLB
860 mov pc, r12
861
862 __common_mmu_cache_on:
863 #ifndef CONFIG_THUMB2_KERNEL
864 #ifndef DEBUG
865 orr r0, r0, #0x000d @ Write buffer, mmu
866 #endif
867 mov r1, #-1
868 mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
869 mcr p15, 0, r1, c3, c0, 0 @ load domain access control
870 b 1f
871 .align 5 @ cache line aligned
872 1: mcr p15, 0, r0, c1, c0, 0 @ load control register
873 mrc p15, 0, r0, c1, c0, 0 @ and read it back to
874 sub pc, lr, r0, lsr #32 @ properly flush pipeline
875 #endif
876
877 #define PROC_ENTRY_SIZE (4*5)
878
879 /*
880 * Here follow the relocatable cache support functions for the
881 * various processors. This is a generic hook for locating an
882 * entry and jumping to an instruction at the specified offset
883 * from the start of the block. Please note this is all position
884 * independent code.
885 *
886 * r1 = corrupted
887 * r2 = corrupted
888 * r3 = block offset
889 * r9 = corrupted
890 * r12 = corrupted
891 */
892
893 call_cache_fn: adr r12, proc_types
894 #ifdef CONFIG_CPU_CP15
895 mrc p15, 0, r9, c0, c0 @ get processor ID
896 #elif defined(CONFIG_CPU_V7M)
897 /*
898 * On v7-M the processor id is located in the V7M_SCB_CPUID
899 * register, but as cache handling is IMPLEMENTATION DEFINED on
900 * v7-M (if existant at all) we just return early here.
901 * If V7M_SCB_CPUID were used the cpu ID functions (i.e.
902 * __armv7_mmu_cache_{on,off,flush}) would be selected which
903 * use cp15 registers that are not implemented on v7-M.
904 */
905 bx lr
906 #else
907 ldr r9, =CONFIG_PROCESSOR_ID
908 #endif
909 1: ldr r1, [r12, #0] @ get value
910 ldr r2, [r12, #4] @ get mask
911 eor r1, r1, r9 @ (real ^ match)
912 tst r1, r2 @ & mask
913 ARM( addeq pc, r12, r3 ) @ call cache function
914 THUMB( addeq r12, r3 )
915 THUMB( moveq pc, r12 ) @ call cache function
916 add r12, r12, #PROC_ENTRY_SIZE
917 b 1b
918
919 /*
920 * Table for cache operations. This is basically:
921 * - CPU ID match
922 * - CPU ID mask
923 * - 'cache on' method instruction
924 * - 'cache off' method instruction
925 * - 'cache flush' method instruction
926 *
927 * We match an entry using: ((real_id ^ match) & mask) == 0
928 *
929 * Writethrough caches generally only need 'on' and 'off'
930 * methods. Writeback caches _must_ have the flush method
931 * defined.
932 */
933 .align 2
934 .type proc_types,#object
935 proc_types:
936 .word 0x41000000 @ old ARM ID
937 .word 0xff00f000
938 mov pc, lr
939 THUMB( nop )
940 mov pc, lr
941 THUMB( nop )
942 mov pc, lr
943 THUMB( nop )
944
945 .word 0x41007000 @ ARM7/710
946 .word 0xfff8fe00
947 mov pc, lr
948 THUMB( nop )
949 mov pc, lr
950 THUMB( nop )
951 mov pc, lr
952 THUMB( nop )
953
954 .word 0x41807200 @ ARM720T (writethrough)
955 .word 0xffffff00
956 W(b) __armv4_mmu_cache_on
957 W(b) __armv4_mmu_cache_off
958 mov pc, lr
959 THUMB( nop )
960
961 .word 0x41007400 @ ARM74x
962 .word 0xff00ff00
963 W(b) __armv3_mpu_cache_on
964 W(b) __armv3_mpu_cache_off
965 W(b) __armv3_mpu_cache_flush
966
967 .word 0x41009400 @ ARM94x
968 .word 0xff00ff00
969 W(b) __armv4_mpu_cache_on
970 W(b) __armv4_mpu_cache_off
971 W(b) __armv4_mpu_cache_flush
972
973 .word 0x41069260 @ ARM926EJ-S (v5TEJ)
974 .word 0xff0ffff0
975 W(b) __arm926ejs_mmu_cache_on
976 W(b) __armv4_mmu_cache_off
977 W(b) __armv5tej_mmu_cache_flush
978
979 .word 0x00007000 @ ARM7 IDs
980 .word 0x0000f000
981 mov pc, lr
982 THUMB( nop )
983 mov pc, lr
984 THUMB( nop )
985 mov pc, lr
986 THUMB( nop )
987
988 @ Everything from here on will be the new ID system.
989
990 .word 0x4401a100 @ sa110 / sa1100
991 .word 0xffffffe0
992 W(b) __armv4_mmu_cache_on
993 W(b) __armv4_mmu_cache_off
994 W(b) __armv4_mmu_cache_flush
995
996 .word 0x6901b110 @ sa1110
997 .word 0xfffffff0
998 W(b) __armv4_mmu_cache_on
999 W(b) __armv4_mmu_cache_off
1000 W(b) __armv4_mmu_cache_flush
1001
1002 .word 0x56056900
1003 .word 0xffffff00 @ PXA9xx
1004 W(b) __armv4_mmu_cache_on
1005 W(b) __armv4_mmu_cache_off
1006 W(b) __armv4_mmu_cache_flush
1007
1008 .word 0x56158000 @ PXA168
1009 .word 0xfffff000
1010 W(b) __armv4_mmu_cache_on
1011 W(b) __armv4_mmu_cache_off
1012 W(b) __armv5tej_mmu_cache_flush
1013
1014 .word 0x56050000 @ Feroceon
1015 .word 0xff0f0000
1016 W(b) __armv4_mmu_cache_on
1017 W(b) __armv4_mmu_cache_off
1018 W(b) __armv5tej_mmu_cache_flush
1019
1020 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
1021 /* this conflicts with the standard ARMv5TE entry */
1022 .long 0x41009260 @ Old Feroceon
1023 .long 0xff00fff0
1024 b __armv4_mmu_cache_on
1025 b __armv4_mmu_cache_off
1026 b __armv5tej_mmu_cache_flush
1027 #endif
1028
1029 .word 0x66015261 @ FA526
1030 .word 0xff01fff1
1031 W(b) __fa526_cache_on
1032 W(b) __armv4_mmu_cache_off
1033 W(b) __fa526_cache_flush
1034
1035 @ These match on the architecture ID
1036
1037 .word 0x00020000 @ ARMv4T
1038 .word 0x000f0000
1039 W(b) __armv4_mmu_cache_on
1040 W(b) __armv4_mmu_cache_off
1041 W(b) __armv4_mmu_cache_flush
1042
1043 .word 0x00050000 @ ARMv5TE
1044 .word 0x000f0000
1045 W(b) __armv4_mmu_cache_on
1046 W(b) __armv4_mmu_cache_off
1047 W(b) __armv4_mmu_cache_flush
1048
1049 .word 0x00060000 @ ARMv5TEJ
1050 .word 0x000f0000
1051 W(b) __armv4_mmu_cache_on
1052 W(b) __armv4_mmu_cache_off
1053 W(b) __armv5tej_mmu_cache_flush
1054
1055 .word 0x0007b000 @ ARMv6
1056 .word 0x000ff000
1057 W(b) __armv6_mmu_cache_on
1058 W(b) __armv4_mmu_cache_off
1059 W(b) __armv6_mmu_cache_flush
1060
1061 .word 0x000f0000 @ new CPU Id
1062 .word 0x000f0000
1063 W(b) __armv7_mmu_cache_on
1064 W(b) __armv7_mmu_cache_off
1065 W(b) __armv7_mmu_cache_flush
1066
1067 .word 0 @ unrecognised type
1068 .word 0
1069 mov pc, lr
1070 THUMB( nop )
1071 mov pc, lr
1072 THUMB( nop )
1073 mov pc, lr
1074 THUMB( nop )
1075
1076 .size proc_types, . - proc_types
1077
1078 /*
1079 * If you get a "non-constant expression in ".if" statement"
1080 * error from the assembler on this line, check that you have
1081 * not accidentally written a "b" instruction where you should
1082 * have written W(b).
1083 */
1084 .if (. - proc_types) % PROC_ENTRY_SIZE != 0
1085 .error "The size of one or more proc_types entries is wrong."
1086 .endif
1087
1088 /*
1089 * Turn off the Cache and MMU. ARMv3 does not support
1090 * reading the control register, but ARMv4 does.
1091 *
1092 * On exit,
1093 * r0, r1, r2, r3, r9, r12 corrupted
1094 * This routine must preserve:
1095 * r4, r7, r8
1096 */
1097 .align 5
1098 cache_off: mov r3, #12 @ cache_off function
1099 b call_cache_fn
1100
1101 __armv4_mpu_cache_off:
1102 mrc p15, 0, r0, c1, c0
1103 bic r0, r0, #0x000d
1104 mcr p15, 0, r0, c1, c0 @ turn MPU and cache off
1105 mov r0, #0
1106 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
1107 mcr p15, 0, r0, c7, c6, 0 @ flush D-Cache
1108 mcr p15, 0, r0, c7, c5, 0 @ flush I-Cache
1109 mov pc, lr
1110
1111 __armv3_mpu_cache_off:
1112 mrc p15, 0, r0, c1, c0
1113 bic r0, r0, #0x000d
1114 mcr p15, 0, r0, c1, c0, 0 @ turn MPU and cache off
1115 mov r0, #0
1116 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
1117 mov pc, lr
1118
1119 __armv4_mmu_cache_off:
1120 #ifdef CONFIG_MMU
1121 mrc p15, 0, r0, c1, c0
1122 bic r0, r0, #0x000d
1123 mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
1124 mov r0, #0
1125 mcr p15, 0, r0, c7, c7 @ invalidate whole cache v4
1126 mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4
1127 #endif
1128 mov pc, lr
1129
1130 __armv7_mmu_cache_off:
1131 mrc p15, 0, r0, c1, c0
1132 #ifdef CONFIG_MMU
1133 bic r0, r0, #0x000d
1134 #else
1135 bic r0, r0, #0x000c
1136 #endif
1137 mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
1138 mov r12, lr
1139 bl __armv7_mmu_cache_flush
1140 mov r0, #0
1141 #ifdef CONFIG_MMU
1142 mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB
1143 #endif
1144 mcr p15, 0, r0, c7, c5, 6 @ invalidate BTC
1145 mcr p15, 0, r0, c7, c10, 4 @ DSB
1146 mcr p15, 0, r0, c7, c5, 4 @ ISB
1147 mov pc, r12
1148
1149 /*
1150 * Clean and flush the cache to maintain consistency.
1151 *
1152 * On exit,
1153 * r1, r2, r3, r9, r10, r11, r12 corrupted
1154 * This routine must preserve:
1155 * r4, r6, r7, r8
1156 */
1157 .align 5
1158 cache_clean_flush:
1159 mov r3, #16
1160 b call_cache_fn
1161
1162 __armv4_mpu_cache_flush:
1163 tst r4, #1
1164 movne pc, lr
1165 mov r2, #1
1166 mov r3, #0
1167 mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
1168 mov r1, #7 << 5 @ 8 segments
1169 1: orr r3, r1, #63 << 26 @ 64 entries
1170 2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index
1171 subs r3, r3, #1 << 26
1172 bcs 2b @ entries 63 to 0
1173 subs r1, r1, #1 << 5
1174 bcs 1b @ segments 7 to 0
1175
1176 teq r2, #0
1177 mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
1178 mcr p15, 0, ip, c7, c10, 4 @ drain WB
1179 mov pc, lr
1180
1181 __fa526_cache_flush:
1182 tst r4, #1
1183 movne pc, lr
1184 mov r1, #0
1185 mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache
1186 mcr p15, 0, r1, c7, c5, 0 @ flush I cache
1187 mcr p15, 0, r1, c7, c10, 4 @ drain WB
1188 mov pc, lr
1189
1190 __armv6_mmu_cache_flush:
1191 mov r1, #0
1192 tst r4, #1
1193 mcreq p15, 0, r1, c7, c14, 0 @ clean+invalidate D
1194 mcr p15, 0, r1, c7, c5, 0 @ invalidate I+BTB
1195 mcreq p15, 0, r1, c7, c15, 0 @ clean+invalidate unified
1196 mcr p15, 0, r1, c7, c10, 4 @ drain WB
1197 mov pc, lr
1198
1199 __armv7_mmu_cache_flush:
1200 tst r4, #1
1201 bne iflush
1202 mrc p15, 0, r10, c0, c1, 5 @ read ID_MMFR1
1203 tst r10, #0xf << 16 @ hierarchical cache (ARMv7)
1204 mov r10, #0
1205 beq hierarchical
1206 mcr p15, 0, r10, c7, c14, 0 @ clean+invalidate D
1207 b iflush
1208 hierarchical:
1209 mcr p15, 0, r10, c7, c10, 5 @ DMB
1210 stmfd sp!, {r0-r7, r9-r11}
1211 mrc p15, 1, r0, c0, c0, 1 @ read clidr
1212 ands r3, r0, #0x7000000 @ extract loc from clidr
1213 mov r3, r3, lsr #23 @ left align loc bit field
1214 beq finished @ if loc is 0, then no need to clean
1215 mov r10, #0 @ start clean at cache level 0
1216 loop1:
1217 add r2, r10, r10, lsr #1 @ work out 3x current cache level
1218 mov r1, r0, lsr r2 @ extract cache type bits from clidr
1219 and r1, r1, #7 @ mask of the bits for current cache only
1220 cmp r1, #2 @ see what cache we have at this level
1221 blt skip @ skip if no cache, or just i-cache
1222 mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
1223 mcr p15, 0, r10, c7, c5, 4 @ isb to sych the new cssr&csidr
1224 mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
1225 and r2, r1, #7 @ extract the length of the cache lines
1226 add r2, r2, #4 @ add 4 (line length offset)
1227 ldr r4, =0x3ff
1228 ands r4, r4, r1, lsr #3 @ find maximum number on the way size
1229 clz r5, r4 @ find bit position of way size increment
1230 ldr r7, =0x7fff
1231 ands r7, r7, r1, lsr #13 @ extract max number of the index size
1232 loop2:
1233 mov r9, r4 @ create working copy of max way size
1234 loop3:
1235 ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11
1236 ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11
1237 THUMB( lsl r6, r9, r5 )
1238 THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11
1239 THUMB( lsl r6, r7, r2 )
1240 THUMB( orr r11, r11, r6 ) @ factor index number into r11
1241 mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
1242 subs r9, r9, #1 @ decrement the way
1243 bge loop3
1244 subs r7, r7, #1 @ decrement the index
1245 bge loop2
1246 skip:
1247 add r10, r10, #2 @ increment cache number
1248 cmp r3, r10
1249 bgt loop1
1250 finished:
1251 ldmfd sp!, {r0-r7, r9-r11}
1252 mov r10, #0 @ switch back to cache level 0
1253 mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
1254 iflush:
1255 mcr p15, 0, r10, c7, c10, 4 @ DSB
1256 mcr p15, 0, r10, c7, c5, 0 @ invalidate I+BTB
1257 mcr p15, 0, r10, c7, c10, 4 @ DSB
1258 mcr p15, 0, r10, c7, c5, 4 @ ISB
1259 mov pc, lr
1260
1261 __armv5tej_mmu_cache_flush:
1262 tst r4, #1
1263 movne pc, lr
1264 1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate D cache
1265 bne 1b
1266 mcr p15, 0, r0, c7, c5, 0 @ flush I cache
1267 mcr p15, 0, r0, c7, c10, 4 @ drain WB
1268 mov pc, lr
1269
1270 __armv4_mmu_cache_flush:
1271 tst r4, #1
1272 movne pc, lr
1273 mov r2, #64*1024 @ default: 32K dcache size (*2)
1274 mov r11, #32 @ default: 32 byte line size
1275 mrc p15, 0, r3, c0, c0, 1 @ read cache type
1276 teq r3, r9 @ cache ID register present?
1277 beq no_cache_id
1278 mov r1, r3, lsr #18
1279 and r1, r1, #7
1280 mov r2, #1024
1281 mov r2, r2, lsl r1 @ base dcache size *2
1282 tst r3, #1 << 14 @ test M bit
1283 addne r2, r2, r2, lsr #1 @ +1/2 size if M == 1
1284 mov r3, r3, lsr #12
1285 and r3, r3, #3
1286 mov r11, #8
1287 mov r11, r11, lsl r3 @ cache line size in bytes
1288 no_cache_id:
1289 mov r1, pc
1290 bic r1, r1, #63 @ align to longest cache line
1291 add r2, r1, r2
1292 1:
1293 ARM( ldr r3, [r1], r11 ) @ s/w flush D cache
1294 THUMB( ldr r3, [r1] ) @ s/w flush D cache
1295 THUMB( add r1, r1, r11 )
1296 teq r1, r2
1297 bne 1b
1298
1299 mcr p15, 0, r1, c7, c5, 0 @ flush I cache
1300 mcr p15, 0, r1, c7, c6, 0 @ flush D cache
1301 mcr p15, 0, r1, c7, c10, 4 @ drain WB
1302 mov pc, lr
1303
1304 __armv3_mmu_cache_flush:
1305 __armv3_mpu_cache_flush:
1306 tst r4, #1
1307 movne pc, lr
1308 mov r1, #0
1309 mcr p15, 0, r1, c7, c0, 0 @ invalidate whole cache v3
1310 mov pc, lr
1311
1312 /*
1313 * Various debugging routines for printing hex characters and
1314 * memory, which again must be relocatable.
1315 */
1316 #ifdef DEBUG
1317 .align 2
1318 .type phexbuf,#object
1319 phexbuf: .space 12
1320 .size phexbuf, . - phexbuf
1321
1322 @ phex corrupts {r0, r1, r2, r3}
1323 phex: adr r3, phexbuf
1324 mov r2, #0
1325 strb r2, [r3, r1]
1326 1: subs r1, r1, #1
1327 movmi r0, r3
1328 bmi puts
1329 and r2, r0, #15
1330 mov r0, r0, lsr #4
1331 cmp r2, #10
1332 addge r2, r2, #7
1333 add r2, r2, #'0'
1334 strb r2, [r3, r1]
1335 b 1b
1336
1337 @ puts corrupts {r0, r1, r2, r3}
1338 puts: loadsp r3, r2, r1
1339 1: ldrb r2, [r0], #1
1340 teq r2, #0
1341 moveq pc, lr
1342 2: writeb r2, r3
1343 mov r1, #0x00020000
1344 3: subs r1, r1, #1
1345 bne 3b
1346 teq r2, #'\n'
1347 moveq r2, #'\r'
1348 beq 2b
1349 teq r0, #0
1350 bne 1b
1351 mov pc, lr
1352 @ putc corrupts {r0, r1, r2, r3}
1353 putc:
1354 mov r2, r0
1355 loadsp r3, r1, r0
1356 mov r0, #0
1357 b 2b
1358
1359 @ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
1360 memdump: mov r12, r0
1361 mov r10, lr
1362 mov r11, #0
1363 2: mov r0, r11, lsl #2
1364 add r0, r0, r12
1365 mov r1, #8
1366 bl phex
1367 mov r0, #':'
1368 bl putc
1369 1: mov r0, #' '
1370 bl putc
1371 ldr r0, [r12, r11, lsl #2]
1372 mov r1, #8
1373 bl phex
1374 and r0, r11, #7
1375 teq r0, #3
1376 moveq r0, #' '
1377 bleq putc
1378 and r0, r11, #7
1379 add r11, r11, #1
1380 teq r0, #7
1381 bne 1b
1382 mov r0, #'\n'
1383 bl putc
1384 cmp r11, #64
1385 blt 2b
1386 mov pc, r10
1387 #endif
1388
1389 .ltorg
1390
1391 #ifdef CONFIG_ARM_VIRT_EXT
1392 .align 5
1393 __hyp_reentry_vectors:
1394 W(b) . @ reset
1395 W(b) . @ undef
1396 W(b) . @ svc
1397 W(b) . @ pabort
1398 W(b) . @ dabort
1399 W(b) __enter_kernel @ hyp
1400 W(b) . @ irq
1401 W(b) . @ fiq
1402 #endif /* CONFIG_ARM_VIRT_EXT */
1403
1404 __enter_kernel:
1405 mov r0, #0 @ must be 0
1406 mov r1, r7 @ restore architecture number
1407 mov r2, r8 @ restore atags pointer
1408 ARM( mov pc, r4 ) @ call kernel
1409 M_CLASS( add r4, r4, #1 ) @ enter in Thumb mode for M class
1410 THUMB( bx r4 ) @ entry point is always ARM for A/R classes
1411
1412 reloc_code_end:
1413
1414 #ifdef CONFIG_EFI_STUB
1415 .align 2
1416 _start: .long start - .
1417
1418 ENTRY(efi_stub_entry)
1419 @ allocate space on stack for passing current zImage address
1420 @ and for the EFI stub to return of new entry point of
1421 @ zImage, as EFI stub may copy the kernel. Pointer address
1422 @ is passed in r2. r0 and r1 are passed through from the
1423 @ EFI firmware to efi_entry
1424 adr ip, _start
1425 ldr r3, [ip]
1426 add r3, r3, ip
1427 stmfd sp!, {r3, lr}
1428 mov r2, sp @ pass zImage address in r2
1429 bl efi_entry
1430
1431 @ Check for error return from EFI stub. r0 has FDT address
1432 @ or error code.
1433 cmn r0, #1
1434 beq efi_load_fail
1435
1436 @ Preserve return value of efi_entry() in r4
1437 mov r4, r0
1438
1439 @ our cache maintenance code relies on CP15 barrier instructions
1440 @ but since we arrived here with the MMU and caches configured
1441 @ by UEFI, we must check that the CP15BEN bit is set in SCTLR.
1442 @ Note that this bit is RAO/WI on v6 and earlier, so the ISB in
1443 @ the enable path will be executed on v7+ only.
1444 mrc p15, 0, r1, c1, c0, 0 @ read SCTLR
1445 tst r1, #(1 << 5) @ CP15BEN bit set?
1446 bne 0f
1447 orr r1, r1, #(1 << 5) @ CP15 barrier instructions
1448 mcr p15, 0, r1, c1, c0, 0 @ write SCTLR
1449 ARM( .inst 0xf57ff06f @ v7+ isb )
1450 THUMB( isb )
1451
1452 0: bl cache_clean_flush
1453 bl cache_off
1454
1455 @ Set parameters for booting zImage according to boot protocol
1456 @ put FDT address in r2, it was returned by efi_entry()
1457 @ r1 is the machine type, and r0 needs to be 0
1458 mov r0, #0
1459 mov r1, #0xFFFFFFFF
1460 mov r2, r4
1461
1462 @ Branch to (possibly) relocated zImage that is in [sp]
1463 ldr lr, [sp]
1464 ldr ip, =start_offset
1465 add lr, lr, ip
1466 mov pc, lr @ no mode switch
1467
1468 efi_load_fail:
1469 @ Return EFI_LOAD_ERROR to EFI firmware on error.
1470 ldr r0, =0x80000001
1471 ldmfd sp!, {ip, pc}
1472 ENDPROC(efi_stub_entry)
1473 #endif
1474
1475 .align
1476 .section ".stack", "aw", %nobits
1477 .L_user_stack: .space 4096
1478 .L_user_stack_end:
Ubuntu Jammy Linux kernel mirror