arch/arm/boot/dts/am335x-nano.dts

   1 /*
   2  * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "am33xx.dtsi"
  11
  12 / {
  13         model = "Newflow AM335x NanoBone";
  14         compatible = "ti,am33xx";
  15
  16         cpus {
  17                 cpu@0 {
  18                         cpu0-supply = <&dcdc2_reg>;
  19                 };
  20         };
  21
  22         memory@80000000 {
  23                 device_type = "memory";
  24                 reg = <0x80000000 0x10000000>; /* 256 MB */
  25         };
  26
  27         leds {
  28                 compatible = "gpio-leds";
  29
  30                 led0 {
  31                         label = "nanobone:green:usr1";
  32                         gpios = <&gpio1 5 0>;
  33                         default-state = "off";
  34                 };
  35         };
  36 };
  37
  38 &am33xx_pinmux {
  39         pinctrl-names = "default";
  40         pinctrl-0 = <&misc_pins>;
  41
  42         misc_pins: misc_pins {
  43                 pinctrl-single,pins = <
  44                         AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)     /* spi0_cs0.gpio0_5 */
  45                 >;
  46         };
  47
  48         gpmc_pins: gpmc_pins {
  49                 pinctrl-single,pins = <
  50                         AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad0.gpmc_ad0 */
  51                         AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad1.gpmc_ad1 */
  52                         AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad2.gpmc_ad2 */
  53                         AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad3.gpmc_ad3 */
  54                         AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad4.gpmc_ad4 */
  55                         AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad5.gpmc_ad5 */
  56                         AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad6.gpmc_ad6 */
  57                         AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad7.gpmc_ad7 */
  58                         AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad8.gpmc_ad8 */
  59                         AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad9.gpmc_ad9 */
  60                         AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad10.gpmc_ad10 */
  61                         AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad11.gpmc_ad11 */
  62                         AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad12.gpmc_ad12 */
  63                         AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad13.gpmc_ad13 */
  64                         AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad14.gpmc_ad14 */
  65                         AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad15.gpmc_ad15 */
  66
  67                         AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_wait0.gpmc_wait0 */
  68                         AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)             /* gpmc_csn0.gpmc_csn0 */
  69                         AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE0)             /* gpmc_csn1.gpmc_csn1 */
  70                         AM33XX_IOPAD(0x884, PIN_OUTPUT | MUX_MODE0)             /* gpmc_csn2.gpmc_csn2 */
  71                         AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE0)             /* gpmc_csn3.gpmc_csn3 */
  72
  73                         AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)             /* gpmc_advn_ale.gpmc_advn_ale */
  74                         AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)             /* gpmc_oen_ren.gpmc_oen_ren */
  75                         AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)             /* gpmc_wen.gpmc_wen */
  76                         AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)             /* gpmc_ben0_cle.gpmc_ben0_cle */
  77
  78                         AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE1)             /* lcd_data1.gpmc_a1 */
  79                         AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE1)             /* lcd_data2.gpmc_a2 */
  80                         AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE1)             /* lcd_data3.gpmc_a3 */
  81                         AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE1)             /* lcd_data4.gpmc_a4 */
  82                         AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE1)             /* lcd_data5.gpmc_a5 */
  83                         AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE1)             /* lcd_data6.gpmc_a6 */
  84                         AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE1)             /* lcd_data7.gpmc_a7 */
  85
  86                         AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE1)             /* lcd_vsync.gpmc_a8 */
  87                         AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE1)             /* lcd_hsync.gpmc_a9 */
  88                         AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE1)             /* lcd_pclk.gpmc_a10 */
  89                 >;
  90         };
  91
  92         i2c0_pins: i2c0_pins {
  93                 pinctrl-single,pins = <
  94                         AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* i2c0_sda.i2c0_sda */
  95                         AM33XX_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* i2c0_scl.i2c0_scl */
  96                 >;
  97         };
  98
  99         uart0_pins: uart0_pins {
 100                 pinctrl-single,pins = <
 101                         AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)       /* uart0_rxd.uart0_rxd */
 102                         AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)             /* uart0_txd.uart0_txd */
 103                 >;
 104         };
 105
 106         uart1_pins: uart1_pins {
 107                 pinctrl-single,pins = <
 108                         AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE7)             /* uart1_ctsn.uart1_ctsn */
 109                         AM33XX_IOPAD(0x97c, PIN_OUTPUT | MUX_MODE7)             /* uart1_rtsn.uart1_rtsn */
 110                         AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)       /* uart1_rxd.uart1_rxd */
 111                         AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)             /* uart1_txd.uart1_txd */
 112                 >;
 113         };
 114
 115         uart2_pins: uart2_pins {
 116                 pinctrl-single,pins = <
 117                         AM33XX_IOPAD(0x8c0, PIN_INPUT_PULLUP | MUX_MODE7)       /* lcd_data8.gpio2[14] */
 118                         AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)             /* lcd_data9.gpio2[15] */
 119                         AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)              /* spi0_sclk.uart2_rxd */
 120                         AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)             /* spi0_d0.uart2_txd */
 121                 >;
 122         };
 123
 124         uart3_pins: uart3_pins {
 125                 pinctrl-single,pins = <
 126                         AM33XX_IOPAD(0x8c8, PIN_INPUT_PULLUP | MUX_MODE6)       /* lcd_data10.uart3_ctsn */
 127                         AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE6)             /* lcd_data11.uart3_rtsn */
 128                         AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE1)              /* spi0_cs1.uart3_rxd */
 129                         AM33XX_IOPAD(0x964, PIN_OUTPUT | MUX_MODE1)             /* ecap0_in_pwm0_out.uart3_txd */
 130                 >;
 131         };
 132
 133         uart4_pins: uart4_pins {
 134                 pinctrl-single,pins = <
 135                         AM33XX_IOPAD(0x8d0, PIN_INPUT_PULLUP | MUX_MODE6)       /* lcd_data12.uart4_ctsn */
 136                         AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE6)             /* lcd_data13.uart4_rtsn */
 137                         AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE1)              /* uart0_ctsn.uart4_rxd */
 138                         AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE1)             /* uart0_rtsn.uart4_txd */
 139                 >;
 140         };
 141
 142         uart5_pins: uart5_pins {
 143                 pinctrl-single,pins = <
 144                         AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE4)              /* lcd_data14.uart5_rxd */
 145                         AM33XX_IOPAD(0x944, PIN_OUTPUT | MUX_MODE3)             /* rmiii1_refclk.uart5_txd */
 146                 >;
 147         };
 148
 149         mmc1_pins: mmc1_pins {
 150                 pinctrl-single,pins = <
 151                         AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat0.mmc0_dat0 */
 152                         AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat1.mmc0_dat1 */
 153                         AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat2.mmc0_dat2 */
 154                         AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat3.mmc0_dat3 */
 155                         AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_clk.mmc0_clk */
 156                         AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_cmd.mmc0_cmd */
 157                         AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)       /* emu1.gpio3[8] */
 158                         AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)       /* mcasp0_aclkr.gpio3[18] */
 159                 >;
 160         };
 161 };
 162
 163 &uart0 {
 164         pinctrl-names = "default";
 165         pinctrl-0 = <&uart0_pins>;
 166         status = "okay";
 167 };
 168
 169 &uart1 {
 170         pinctrl-names = "default";
 171         pinctrl-0 = <&uart1_pins>;
 172         status = "okay";
 173         rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 174         rs485-rts-active-high;
 175         rs485-rx-during-tx;
 176         rs485-rts-delay = <1 1>;
 177         linux,rs485-enabled-at-boot-time;
 178 };
 179
 180 &uart2 {
 181         pinctrl-names = "default";
 182         pinctrl-0 = <&uart2_pins>;
 183         status = "okay";
 184         rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 185         rs485-rts-active-high;
 186         rs485-rts-delay = <1 1>;
 187         linux,rs485-enabled-at-boot-time;
 188 };
 189
 190 &uart3 {
 191         pinctrl-names = "default";
 192         pinctrl-0 = <&uart3_pins>;
 193         status = "okay";
 194 };
 195
 196 &uart4 {
 197         pinctrl-names = "default";
 198         pinctrl-0 = <&uart4_pins>;
 199         status = "okay";
 200 };
 201
 202 &uart5 {
 203         pinctrl-names = "default";
 204         pinctrl-0 = <&uart5_pins>;
 205         status = "okay";
 206 };
 207
 208 &i2c0 {
 209         status = "okay";
 210         pinctrl-names = "default";
 211         clock-frequency = <400000>;
 212         pinctrl-names = "default";
 213         pinctrl-0 = <&i2c0_pins>;
 214
 215         gpio@20 {
 216                 compatible = "microchip,mcp23017";
 217                 gpio-controller;
 218                 #gpio-cells = <2>;
 219                 reg = <0x20>;
 220         };
 221
 222         tps: tps@24 {
 223                 reg = <0x24>;
 224         };
 225
 226         eeprom@53 {
 227                 compatible = "microchip,24c02", "atmel,24c02";
 228                 reg = <0x53>;
 229                 pagesize = <8>;
 230         };
 231
 232         rtc@68 {
 233                 compatible = "dallas,ds1307";
 234                 reg = <0x68>;
 235         };
 236 };
 237
 238 &elm {
 239         status = "okay";
 240 };
 241
 242 &gpmc {
 243         compatible = "ti,am3352-gpmc";
 244         ti,hwmods = "gpmc";
 245         status = "okay";
 246         gpmc,num-waitpins = <2>;
 247         pinctrl-names = "default";
 248         pinctrl-0 = <&gpmc_pins>;
 249
 250         #address-cells = <2>;
 251         #size-cells = <1>;
 252         ranges = <0 0 0x08000000 0x08000000>,   /* CS0: NOR 128M */
 253                  <1 0 0x1c000000 0x01000000>;   /* CS1: FRAM 16M */
 254
 255         nor@0,0 {
 256                 reg = <0 0x00000000 0x08000000>;
 257                 compatible = "cfi-flash";
 258                 linux,mtd-name = "spansion,s29gl010p11t";
 259                 bank-width = <2>;
 260
 261                 gpmc,mux-add-data = <2>;
 262
 263                 gpmc,sync-clk-ps = <0>;
 264                 gpmc,cs-on-ns = <0>;
 265                 gpmc,cs-rd-off-ns = <160>;
 266                 gpmc,cs-wr-off-ns = <160>;
 267                 gpmc,adv-on-ns = <10>;
 268                 gpmc,adv-rd-off-ns = <30>;
 269                 gpmc,adv-wr-off-ns = <30>;
 270                 gpmc,oe-on-ns = <40>;
 271                 gpmc,oe-off-ns = <160>;
 272                 gpmc,we-on-ns = <40>;
 273                 gpmc,we-off-ns = <160>;
 274                 gpmc,rd-cycle-ns = <160>;
 275                 gpmc,wr-cycle-ns = <160>;
 276                 gpmc,access-ns = <150>;
 277                 gpmc,page-burst-access-ns = <10>;
 278                 gpmc,cycle2cycle-samecsen;
 279                 gpmc,cycle2cycle-delay-ns = <20>;
 280                 gpmc,wr-data-mux-bus-ns = <70>;
 281                 gpmc,wr-access-ns = <80>;
 282
 283                 #address-cells = <1>;
 284                 #size-cells = <1>;
 285
 286                 /*
 287                 MTD partition table
 288                 ===================
 289                 +------------+-->0x00000000-> U-Boot start
 290                 |            |
 291                 |            |-->0x000BFFFF-> U-Boot end
 292                 |            |-->0x000C0000-> ENV1 start
 293                 |            |
 294                 |            |-->0x000DFFFF-> ENV1 end
 295                 |            |-->0x000E0000-> ENV2 start
 296                 |            |
 297                 |            |-->0x000FFFFF-> ENV2 end
 298                 |            |-->0x00100000-> Kernel start
 299                 |            |
 300                 |            |-->0x004FFFFF-> Kernel end
 301                 |            |-->0x00500000-> File system start
 302                 |            |
 303                 |            |-->0x01FFFFFF-> File system end
 304                 |            |-->0x02000000-> User data start
 305                 |            |
 306                 |            |-->0x03FFFFFF-> User data end
 307                 |            |-->0x04000000-> Data storage start
 308                 |            |
 309                 +------------+-->0x08000000-> NOR end (Free end)
 310                 */
 311                 partition@0 {
 312                         label = "boot";
 313                         reg = <0x00000000 0x000c0000>; /* 768KB */
 314                 };
 315
 316                 partition@1 {
 317                         label = "env1";
 318                         reg = <0x000c0000 0x00020000>; /* 128KB */
 319                 };
 320
 321                 partition@2 {
 322                         label = "env2";
 323                         reg = <0x000e0000 0x00020000>; /* 128KB */
 324                 };
 325
 326                 partition@3 {
 327                         label = "kernel";
 328                         reg = <0x00100000 0x00400000>; /* 4MB */
 329                 };
 330
 331                 partition@4 {
 332                         label = "rootfs";
 333                         reg = <0x00500000 0x01b00000>; /* 27MB */
 334                 };
 335
 336                 partition@5 {
 337                         label = "user";
 338                         reg = <0x02000000 0x02000000>; /* 32MB */
 339                 };
 340
 341                 partition@6 {
 342                         label = "data";
 343                         reg = <0x04000000 0x04000000>; /* 64MB */
 344                 };
 345         };
 346
 347         fram@1,0 {
 348                 reg = <1 0x00000000 0x01000000>;
 349                 bank-width = <2>;
 350
 351                 gpmc,mux-add-data = <2>;
 352
 353                 gpmc,sync-clk-ps = <0>;
 354                 gpmc,cs-on-ns = <0>;
 355                 gpmc,cs-rd-off-ns = <160>;
 356                 gpmc,cs-wr-off-ns = <160>;
 357                 gpmc,adv-on-ns = <10>;
 358                 gpmc,adv-rd-off-ns = <20>;
 359                 gpmc,adv-wr-off-ns = <20>;
 360                 gpmc,oe-on-ns = <30>;
 361                 gpmc,oe-off-ns = <150>;
 362                 gpmc,we-on-ns = <30>;
 363                 gpmc,we-off-ns = <150>;
 364                 gpmc,rd-cycle-ns = <160>;
 365                 gpmc,wr-cycle-ns = <160>;
 366                 gpmc,access-ns = <130>;
 367                 gpmc,page-burst-access-ns = <10>;
 368                 gpmc,cycle2cycle-samecsen;
 369                 gpmc,cycle2cycle-diffcsen;
 370                 gpmc,cycle2cycle-delay-ns = <10>;
 371                 gpmc,wr-data-mux-bus-ns = <30>;
 372                 gpmc,wr-access-ns = <0>;
 373         };
 374 };
 375
 376 &mac {
 377         dual_emac;
 378         status = "okay";
 379 };
 380
 381 &davinci_mdio {
 382         status = "okay";
 383 };
 384
 385 &cpsw_emac0 {
 386         phy_id = <&davinci_mdio>, <0>;
 387         phy-mode = "mii";
 388         dual_emac_res_vlan = <1>;
 389 };
 390
 391 &cpsw_emac1 {
 392         phy_id = <&davinci_mdio>, <1>;
 393         phy-mode = "mii";
 394         dual_emac_res_vlan = <2>;
 395 };
 396
 397 &mmc1 {
 398         status = "okay";
 399         vmmc-supply = <&ldo4_reg>;
 400         pinctrl-names = "default";
 401         pinctrl-0 = <&mmc1_pins>;
 402         bus-width = <4>;
 403         cd-gpios = <&gpio3 8 0>;
 404         wp-gpios = <&gpio3 18 0>;
 405 };
 406
 407 #include "tps65217.dtsi"
 408
 409 &tps {
 410         regulators {
 411                 dcdc1_reg: regulator@0 {
 412                         /* +1.5V voltage with ±4% tolerance */
 413                         regulator-min-microvolt = <1450000>;
 414                         regulator-max-microvolt = <1550000>;
 415                         regulator-boot-on;
 416                         regulator-always-on;
 417                 };
 418
 419                 dcdc2_reg: regulator@1 {
 420                         /* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
 421                         regulator-name = "vdd_mpu";
 422                         regulator-min-microvolt = <915000>;
 423                         regulator-max-microvolt = <1140000>;
 424                         regulator-boot-on;
 425                         regulator-always-on;
 426                 };
 427
 428                 dcdc3_reg: regulator@2 {
 429                         /* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
 430                         regulator-name = "vdd_core";
 431                         regulator-min-microvolt = <915000>;
 432                         regulator-max-microvolt = <1140000>;
 433                         regulator-boot-on;
 434                         regulator-always-on;
 435                 };
 436
 437                 ldo1_reg: regulator@3 {
 438                         /* +1.8V voltage with ±4% tolerance */
 439                         regulator-min-microvolt = <1750000>;
 440                         regulator-max-microvolt = <1870000>;
 441                         regulator-boot-on;
 442                         regulator-always-on;
 443                 };
 444
 445                 ldo2_reg: regulator@4 {
 446                         /* +3.3V voltage with ±4% tolerance */
 447                         regulator-min-microvolt = <3175000>;
 448                         regulator-max-microvolt = <3430000>;
 449                         regulator-boot-on;
 450                         regulator-always-on;
 451                 };
 452
 453                 ldo3_reg: regulator@5 {
 454                         /* +1.8V voltage with ±4% tolerance */
 455                         regulator-min-microvolt = <1750000>;
 456                         regulator-max-microvolt = <1870000>;
 457                         regulator-boot-on;
 458                         regulator-always-on;
 459                 };
 460
 461                 ldo4_reg: regulator@6 {
 462                         /* +3.3V voltage with ±4% tolerance */
 463                         regulator-min-microvolt = <3175000>;
 464                         regulator-max-microvolt = <3430000>;
 465                         regulator-boot-on;
 466                         regulator-always-on;
 467                 };
 468         };
 469 };