]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - arch/arm/boot/dts/armada-xp-gp.dts
ARM: at91: dt: at91sam9x5: correct NAND pins comments
[mirror_ubuntu-bionic-kernel.git] / arch / arm / boot / dts / armada-xp-gp.dts
1 /*
2 * Device Tree file for Marvell Armada XP development board
3 * (DB-MV784MP-GP)
4 *
5 * Copyright (C) 2013 Marvell
6 *
7 * Lior Amsalem <alior@marvell.com>
8 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
10 *
11 * This file is licensed under the terms of the GNU General Public
12 * License version 2. This program is licensed "as is" without any
13 * warranty of any kind, whether express or implied.
14 */
15
16 /dts-v1/;
17 /include/ "armada-xp-mv78460.dtsi"
18
19 / {
20 model = "Marvell Armada XP Development Board DB-MV784MP-GP";
21 compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
22
23 chosen {
24 bootargs = "console=ttyS0,115200 earlyprintk";
25 };
26
27 memory {
28 device_type = "memory";
29
30 /*
31 * 4 GB of plug-in RAM modules by default but only 3GB
32 * are visible, the amount of memory available can be
33 * changed by the bootloader according the size of the
34 * module actually plugged
35 */
36 reg = <0x00000000 0xC0000000>;
37 };
38
39 soc {
40 serial@d0012000 {
41 clock-frequency = <250000000>;
42 status = "okay";
43 };
44 serial@d0012100 {
45 clock-frequency = <250000000>;
46 status = "okay";
47 };
48 serial@d0012200 {
49 clock-frequency = <250000000>;
50 status = "okay";
51 };
52 serial@d0012300 {
53 clock-frequency = <250000000>;
54 status = "okay";
55 };
56
57 sata@d00a0000 {
58 nr-ports = <2>;
59 status = "okay";
60 };
61
62 mdio {
63 phy0: ethernet-phy@0 {
64 reg = <16>;
65 };
66
67 phy1: ethernet-phy@1 {
68 reg = <17>;
69 };
70
71 phy2: ethernet-phy@2 {
72 reg = <18>;
73 };
74
75 phy3: ethernet-phy@3 {
76 reg = <19>;
77 };
78 };
79
80 ethernet@d0070000 {
81 status = "okay";
82 phy = <&phy0>;
83 phy-mode = "rgmii-id";
84 };
85 ethernet@d0074000 {
86 status = "okay";
87 phy = <&phy1>;
88 phy-mode = "rgmii-id";
89 };
90 ethernet@d0030000 {
91 status = "okay";
92 phy = <&phy2>;
93 phy-mode = "rgmii-id";
94 };
95 ethernet@d0034000 {
96 status = "okay";
97 phy = <&phy3>;
98 phy-mode = "rgmii-id";
99 };
100
101 spi0: spi@d0010600 {
102 status = "okay";
103
104 spi-flash@0 {
105 #address-cells = <1>;
106 #size-cells = <1>;
107 compatible = "n25q128a13";
108 reg = <0>; /* Chip select 0 */
109 spi-max-frequency = <108000000>;
110 };
111 };
112 };
113 };