arch/arm/boot/dts/armada-xp-mv78260.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree Include file for Marvell Armada XP family SoC
   4  *
   5  * Copyright (C) 2012 Marvell
   6  *
   7  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
   8  *
   9  * Contains definitions specific to the Armada XP MV78260 SoC that are not
  10  * common to all Armada XP SoCs.
  11  */
  12
  13 #include "armada-xp.dtsi"
  14
  15 / {
  16         model = "Marvell Armada XP MV78260 SoC";
  17         compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
  18
  19         aliases {
  20                 gpio0 = &gpio0;
  21                 gpio1 = &gpio1;
  22                 gpio2 = &gpio2;
  23         };
  24
  25         cpus {
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28                 enable-method = "marvell,armada-xp-smp";
  29
  30                 cpu@0 {
  31                         device_type = "cpu";
  32                         compatible = "marvell,sheeva-v7";
  33                         reg = <0>;
  34                         clocks = <&cpuclk 0>;
  35                         clock-latency = <1000000>;
  36                 };
  37
  38                 cpu@1 {
  39                         device_type = "cpu";
  40                         compatible = "marvell,sheeva-v7";
  41                         reg = <1>;
  42                         clocks = <&cpuclk 1>;
  43                         clock-latency = <1000000>;
  44                 };
  45         };
  46
  47         soc {
  48                 /*
  49                  * MV78260 has 3 PCIe units Gen2.0: Two units can be
  50                  * configured as x4 or quad x1 lanes. One unit is
  51                  * x4 only.
  52                  */
  53                 pciec: pcie@82000000 {
  54                         compatible = "marvell,armada-xp-pcie";
  55                         status = "disabled";
  56                         device_type = "pci";
  57
  58                         #address-cells = <3>;
  59                         #size-cells = <2>;
  60
  61                         msi-parent = <&mpic>;
  62                         bus-range = <0x00 0xff>;
  63
  64                         ranges =
  65                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
  66                                 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
  67                                 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
  68                                 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
  69                                 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
  70                                 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
  71                                 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
  72                                 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
  73                                 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
  74                                 0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
  75                                 0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
  76                                 0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
  77                                 0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
  78                                 0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
  79                                 0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
  80                                 0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
  81                                 0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
  82
  83                                 0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
  84                                 0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
  85                                 0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
  86                                 0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
  87                                 0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
  88                                 0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
  89                                 0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
  90                                 0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
  91
  92                                 0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
  93                                 0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
  94
  95                         pcie1: pcie@1,0 {
  96                                 device_type = "pci";
  97                                 assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
  98                                 reg = <0x0800 0 0 0 0>;
  99                                 #address-cells = <3>;
 100                                 #size-cells = <2>;
 101                                 #interrupt-cells = <1>;
 102                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 103                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
 104                                 bus-range = <0x00 0xff>;
 105                                 interrupt-map-mask = <0 0 0 0>;
 106                                 interrupt-map = <0 0 0 0 &mpic 58>;
 107                                 marvell,pcie-port = <0>;
 108                                 marvell,pcie-lane = <0>;
 109                                 clocks = <&gateclk 5>;
 110                                 status = "disabled";
 111                         };
 112
 113                         pcie2: pcie@2,0 {
 114                                 device_type = "pci";
 115                                 assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 116                                 reg = <0x1000 0 0 0 0>;
 117                                 #address-cells = <3>;
 118                                 #size-cells = <2>;
 119                                 #interrupt-cells = <1>;
 120                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 121                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 122                                 bus-range = <0x00 0xff>;
 123                                 interrupt-map-mask = <0 0 0 0>;
 124                                 interrupt-map = <0 0 0 0 &mpic 59>;
 125                                 marvell,pcie-port = <0>;
 126                                 marvell,pcie-lane = <1>;
 127                                 clocks = <&gateclk 6>;
 128                                 status = "disabled";
 129                         };
 130
 131                         pcie3: pcie@3,0 {
 132                                 device_type = "pci";
 133                                 assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 134                                 reg = <0x1800 0 0 0 0>;
 135                                 #address-cells = <3>;
 136                                 #size-cells = <2>;
 137                                 #interrupt-cells = <1>;
 138                                 ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 139                                           0x81000000 0 0 0x81000000 0x3 0 1 0>;
 140                                 bus-range = <0x00 0xff>;
 141                                 interrupt-map-mask = <0 0 0 0>;
 142                                 interrupt-map = <0 0 0 0 &mpic 60>;
 143                                 marvell,pcie-port = <0>;
 144                                 marvell,pcie-lane = <2>;
 145                                 clocks = <&gateclk 7>;
 146                                 status = "disabled";
 147                         };
 148
 149                         pcie4: pcie@4,0 {
 150                                 device_type = "pci";
 151                                 assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
 152                                 reg = <0x2000 0 0 0 0>;
 153                                 #address-cells = <3>;
 154                                 #size-cells = <2>;
 155                                 #interrupt-cells = <1>;
 156                                 ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 157                                           0x81000000 0 0 0x81000000 0x4 0 1 0>;
 158                                 bus-range = <0x00 0xff>;
 159                                 interrupt-map-mask = <0 0 0 0>;
 160                                 interrupt-map = <0 0 0 0 &mpic 61>;
 161                                 marvell,pcie-port = <0>;
 162                                 marvell,pcie-lane = <3>;
 163                                 clocks = <&gateclk 8>;
 164                                 status = "disabled";
 165                         };
 166
 167                         pcie5: pcie@5,0 {
 168                                 device_type = "pci";
 169                                 assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 170                                 reg = <0x2800 0 0 0 0>;
 171                                 #address-cells = <3>;
 172                                 #size-cells = <2>;
 173                                 #interrupt-cells = <1>;
 174                                 ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 175                                           0x81000000 0 0 0x81000000 0x5 0 1 0>;
 176                                 bus-range = <0x00 0xff>;
 177                                 interrupt-map-mask = <0 0 0 0>;
 178                                 interrupt-map = <0 0 0 0 &mpic 62>;
 179                                 marvell,pcie-port = <1>;
 180                                 marvell,pcie-lane = <0>;
 181                                 clocks = <&gateclk 9>;
 182                                 status = "disabled";
 183                         };
 184
 185                         pcie6: pcie@6,0 {
 186                                 device_type = "pci";
 187                                 assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
 188                                 reg = <0x3000 0 0 0 0>;
 189                                 #address-cells = <3>;
 190                                 #size-cells = <2>;
 191                                 #interrupt-cells = <1>;
 192                                 ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 193                                           0x81000000 0 0 0x81000000 0x6 0 1 0>;
 194                                 bus-range = <0x00 0xff>;
 195                                 interrupt-map-mask = <0 0 0 0>;
 196                                 interrupt-map = <0 0 0 0 &mpic 63>;
 197                                 marvell,pcie-port = <1>;
 198                                 marvell,pcie-lane = <1>;
 199                                 clocks = <&gateclk 10>;
 200                                 status = "disabled";
 201                         };
 202
 203                         pcie7: pcie@7,0 {
 204                                 device_type = "pci";
 205                                 assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
 206                                 reg = <0x3800 0 0 0 0>;
 207                                 #address-cells = <3>;
 208                                 #size-cells = <2>;
 209                                 #interrupt-cells = <1>;
 210                                 ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 211                                           0x81000000 0 0 0x81000000 0x7 0 1 0>;
 212                                 bus-range = <0x00 0xff>;
 213                                 interrupt-map-mask = <0 0 0 0>;
 214                                 interrupt-map = <0 0 0 0 &mpic 64>;
 215                                 marvell,pcie-port = <1>;
 216                                 marvell,pcie-lane = <2>;
 217                                 clocks = <&gateclk 11>;
 218                                 status = "disabled";
 219                         };
 220
 221                         pcie8: pcie@8,0 {
 222                                 device_type = "pci";
 223                                 assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
 224                                 reg = <0x4000 0 0 0 0>;
 225                                 #address-cells = <3>;
 226                                 #size-cells = <2>;
 227                                 #interrupt-cells = <1>;
 228                                 ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 229                                           0x81000000 0 0 0x81000000 0x8 0 1 0>;
 230                                 bus-range = <0x00 0xff>;
 231                                 interrupt-map-mask = <0 0 0 0>;
 232                                 interrupt-map = <0 0 0 0 &mpic 65>;
 233                                 marvell,pcie-port = <1>;
 234                                 marvell,pcie-lane = <3>;
 235                                 clocks = <&gateclk 12>;
 236                                 status = "disabled";
 237                         };
 238
 239                         pcie9: pcie@9,0 {
 240                                 device_type = "pci";
 241                                 assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
 242                                 reg = <0x4800 0 0 0 0>;
 243                                 #address-cells = <3>;
 244                                 #size-cells = <2>;
 245                                 #interrupt-cells = <1>;
 246                                 ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 247                                           0x81000000 0 0 0x81000000 0x9 0 1 0>;
 248                                 bus-range = <0x00 0xff>;
 249                                 interrupt-map-mask = <0 0 0 0>;
 250                                 interrupt-map = <0 0 0 0 &mpic 99>;
 251                                 marvell,pcie-port = <2>;
 252                                 marvell,pcie-lane = <0>;
 253                                 clocks = <&gateclk 26>;
 254                                 status = "disabled";
 255                         };
 256                 };
 257
 258                 internal-regs {
 259                         gpio0: gpio@18100 {
 260                                 compatible = "marvell,armada-370-gpio",
 261                                              "marvell,orion-gpio";
 262                                 reg = <0x18100 0x40>, <0x181c0 0x08>;
 263                                 reg-names = "gpio", "pwm";
 264                                 ngpios = <32>;
 265                                 gpio-controller;
 266                                 #gpio-cells = <2>;
 267                                 #pwm-cells = <2>;
 268                                 interrupt-controller;
 269                                 #interrupt-cells = <2>;
 270                                 interrupts = <82>, <83>, <84>, <85>;
 271                                 clocks = <&coreclk 0>;
 272                         };
 273
 274                         gpio1: gpio@18140 {
 275                                 compatible = "marvell,armada-370-gpio",
 276                                              "marvell,orion-gpio";
 277                                 reg = <0x18140 0x40>, <0x181c8 0x08>;
 278                                 reg-names = "gpio", "pwm";
 279                                 ngpios = <32>;
 280                                 gpio-controller;
 281                                 #gpio-cells = <2>;
 282                                 #pwm-cells = <2>;
 283                                 interrupt-controller;
 284                                 #interrupt-cells = <2>;
 285                                 interrupts = <87>, <88>, <89>, <90>;
 286                                 clocks = <&coreclk 0>;
 287                         };
 288
 289                         gpio2: gpio@18180 {
 290                                 compatible = "marvell,armada-370-gpio",
 291                                              "marvell,orion-gpio";
 292                                 reg = <0x18180 0x40>;
 293                                 ngpios = <3>;
 294                                 gpio-controller;
 295                                 #gpio-cells = <2>;
 296                                 interrupt-controller;
 297                                 #interrupt-cells = <2>;
 298                                 interrupts = <91>;
 299                         };
 300
 301                         eth3: ethernet@34000 {
 302                                 compatible = "marvell,armada-xp-neta";
 303                                 reg = <0x34000 0x4000>;
 304                                 interrupts = <14>;
 305                                 clocks = <&gateclk 1>;
 306                                 status = "disabled";
 307                         };
 308                 };
 309         };
 310 };
 311
 312 &pinctrl {
 313         compatible = "marvell,mv78260-pinctrl";
 314 };