arch/arm/boot/dts/at91-sama5d4ek.dts

   1 /*
   2  * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
   3  *
   4  *  Copyright (C) 2014 Atmel,
   5  *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
   6  *
   7  * This file is dual-licensed: you can use it either under the terms
   8  * of the GPL or the X11 license, at your option. Note that this dual
   9  * licensing only applies to this file, and not this project as a
  10  * whole.
  11  *
  12  *  a) This file is free software; you can redistribute it and/or
  13  *     modify it under the terms of the GNU General Public License as
  14  *     published by the Free Software Foundation; either version 2 of the
  15  *     License, or (at your option) any later version.
  16  *
  17  *     This file is distributed in the hope that it will be useful,
  18  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20  *     GNU General Public License for more details.
  21  *
  22  * Or, alternatively,
  23  *
  24  *  b) Permission is hereby granted, free of charge, to any person
  25  *     obtaining a copy of this software and associated documentation
  26  *     files (the "Software"), to deal in the Software without
  27  *     restriction, including without limitation the rights to use,
  28  *     copy, modify, merge, publish, distribute, sublicense, and/or
  29  *     sell copies of the Software, and to permit persons to whom the
  30  *     Software is furnished to do so, subject to the following
  31  *     conditions:
  32  *
  33  *     The above copyright notice and this permission notice shall be
  34  *     included in all copies or substantial portions of the Software.
  35  *
  36  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  37  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  38  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  39  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  40  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  41  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  42  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  43  *     OTHER DEALINGS IN THE SOFTWARE.
  44  */
  45 /dts-v1/;
  46 #include "sama5d4.dtsi"
  47
  48 / {
  49         model = "Atmel SAMA5D4-EK";
  50         compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
  51
  52         chosen {
  53                 stdout-path = "serial0:115200n8";
  54         };
  55
  56         memory {
  57                 reg = <0x20000000 0x20000000>;
  58         };
  59
  60         clocks {
  61                 slow_xtal {
  62                         clock-frequency = <32768>;
  63                 };
  64
  65                 main_xtal {
  66                         clock-frequency = <12000000>;
  67                 };
  68         };
  69
  70         ahb {
  71                 apb {
  72                         lcd_bus@f0000000 {
  73                                 status = "okay";
  74
  75                                 lcd@f0000000 {
  76                                         status = "okay";
  77                                 };
  78
  79                                 lcdovl1@f0000140 {
  80                                         status = "okay";
  81                                 };
  82
  83                                 lcdovl2@f0000240 {
  84                                         status = "okay";
  85                                 };
  86
  87                                 lcdheo1@f0000340 {
  88                                         status = "okay";
  89                                 };
  90                         };
  91
  92                         adc0: adc@fc034000 {
  93                                 pinctrl-names = "default";
  94                                 pinctrl-0 = <
  95                                         /* external trigger conflicts with USBA_VBUS */
  96                                         &pinctrl_adc0_ad0
  97                                         &pinctrl_adc0_ad1
  98                                         &pinctrl_adc0_ad2
  99                                         &pinctrl_adc0_ad3
 100                                         &pinctrl_adc0_ad4
 101                                         >;
 102                                 /* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
 103                                 atmel,adc-vref = <3300>;
 104                                 /*atmel,adc-ts-wires = <4>;*/   /* Set up ADC touch screen */
 105                                 status = "okay";                /* Enable ADC IIO support */
 106                         };
 107
 108                         mmc0: mmc@f8000000 {
 109                                 pinctrl-names = "default";
 110                                 pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
 111                                 slot@0 {
 112                                         reg = <0>;
 113                                         bus-width = <4>;
 114                                         cd-gpios = <&pioE 5 0>;
 115                                 };
 116                         };
 117
 118                         ssc0: ssc@f8008000 {
 119                                 status = "okay";
 120                         };
 121
 122                         spi0: spi@f8010000 {
 123                                 cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 124                                 status = "okay";
 125                                 m25p80@0 {
 126                                         compatible = "atmel,at25df321a";
 127                                         spi-max-frequency = <50000000>;
 128                                         reg = <0>;
 129                                 };
 130                         };
 131
 132                         i2c0: i2c@f8014000 {
 133                                 status = "okay";
 134
 135                                 wm8904: codec@1a {
 136                                         compatible = "wlf,wm8904";
 137                                         reg = <0x1a>;
 138                                         clocks = <&pck2>;
 139                                         clock-names = "mclk";
 140                                 };
 141
 142                                 qt1070:keyboard@1b {
 143                                         compatible = "qt1070";
 144                                         reg = <0x1b>;
 145                                         interrupt-parent = <&pioE>;
 146                                         interrupts = <25 0x0>;
 147                                         pinctrl-names = "default";
 148                                         pinctrl-0 = <&pinctrl_qt1070_irq>;
 149                                         wakeup-source;
 150                                 };
 151
 152                                 atmel_mxt_ts@4c {
 153                                         compatible = "atmel,atmel_mxt_ts";
 154                                         reg = <0x4c>;
 155                                         interrupt-parent = <&pioE>;
 156                                         interrupts = <24 0x0>;
 157                                         pinctrl-names = "default";
 158                                         pinctrl-0 = <&pinctrl_mxt_ts>;
 159                                 };
 160                         };
 161
 162                         macb0: ethernet@f8020000 {
 163                                 pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 164                                 phy-mode = "rmii";
 165                                 status = "okay";
 166
 167                                 ethernet-phy@1 {
 168                                         reg = <0x1>;
 169                                         interrupt-parent = <&pioE>;
 170                                         interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 171                                 };
 172                         };
 173
 174                         mmc1: mmc@fc000000 {
 175                                 pinctrl-names = "default";
 176                                 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
 177                                 status = "okay";
 178                                 slot@0 {
 179                                         reg = <0>;
 180                                         bus-width = <4>;
 181                                         cd-gpios = <&pioE 6 0>;
 182                                 };
 183                         };
 184
 185                         usart2: serial@fc008000 {
 186                                 status = "okay";
 187                         };
 188
 189                         usart3: serial@fc00c000 {
 190                                 status = "okay";
 191                         };
 192
 193                         usart4: serial@fc010000 {
 194                                 status = "okay";
 195                         };
 196
 197                         watchdog@fc068640 {
 198                                 status = "okay";
 199                         };
 200
 201                         pinctrl@fc06a000 {
 202                                 board {
 203                                         pinctrl_macb0_phy_irq: macb0_phy_irq {
 204                                                 atmel,pins =
 205                                                         <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 206                                         };
 207                                         pinctrl_mmc0_cd: mmc0_cd {
 208                                                 atmel,pins =
 209                                                         <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 210                                         };
 211                                         pinctrl_mmc1_cd: mmc1_cd {
 212                                                 atmel,pins =
 213                                                         <AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 214                                         };
 215                                         pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
 216                                                 atmel,pins =
 217                                                         <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 218                                         };
 219                                         pinctrl_usba_vbus: usba_vbus {
 220                                                 atmel,pins =
 221                                                         <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
 222                                         };
 223                                         pinctrl_key_gpio: key_gpio_0 {
 224                                                 atmel,pins =
 225                                                         <AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
 226                                         };
 227                                         pinctrl_qt1070_irq: qt1070_irq {
 228                                                 atmel,pins =
 229                                                         <AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 230                                         };
 231                                         pinctrl_mxt_ts: mxt_irq {
 232                                                 atmel,pins =
 233                                                         <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 234                                         };
 235                                 };
 236                         };
 237                 };
 238
 239                 usb0: gadget@00400000 {
 240                         atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
 241                         pinctrl-names = "default";
 242                         pinctrl-0 = <&pinctrl_usba_vbus>;
 243                         status = "okay";
 244                 };
 245
 246                 usb1: ohci@00500000 {
 247                         num-ports = <3>;
 248                         atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
 249                                            &pioE 11 GPIO_ACTIVE_LOW
 250                                            &pioE 12 GPIO_ACTIVE_LOW
 251                                           >;
 252                         status = "okay";
 253                 };
 254
 255                 usb2: ehci@00600000 {
 256                         status = "okay";
 257                 };
 258
 259                 nand0: nand@80000000 {
 260                         nand-bus-width = <8>;
 261                         nand-ecc-mode = "hw";
 262                         nand-on-flash-bbt;
 263                         atmel,has-pmecc;
 264                         status = "okay";
 265
 266                         at91bootstrap@0 {
 267                                 label = "at91bootstrap";
 268                                 reg = <0x0 0x40000>;
 269                         };
 270
 271                         bootloader@40000 {
 272                                 label = "bootloader";
 273                                 reg = <0x40000 0x80000>;
 274                         };
 275
 276                         bootloaderenv@c0000 {
 277                                 label = "bootloader env";
 278                                 reg = <0xc0000 0xc0000>;
 279                         };
 280
 281                         dtb@180000 {
 282                                 label = "device tree";
 283                                 reg = <0x180000 0x80000>;
 284                         };
 285
 286                         kernel@200000 {
 287                                 label = "kernel";
 288                                 reg = <0x200000 0x600000>;
 289                         };
 290
 291                         rootfs@800000 {
 292                                 label = "rootfs";
 293                                 reg = <0x800000 0x0f800000>;
 294                         };
 295                 };
 296         };
 297
 298         gpio_keys {
 299                 compatible = "gpio-keys";
 300
 301                 pinctrl-names = "default";
 302                 pinctrl-0 = <&pinctrl_key_gpio>;
 303
 304                 pb_user1 {
 305                         label = "pb_user1";
 306                         gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
 307                         linux,code = <0x100>;
 308                         wakeup-source;
 309                 };
 310         };
 311
 312         leds {
 313                 compatible = "gpio-leds";
 314                 status = "okay";
 315
 316                 d8 {
 317                         label = "d8";
 318                         /* PE28, conflicts with usart4 rts pin */
 319                         gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
 320                 };
 321
 322                 d9 {
 323                         label = "d9";
 324                         gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
 325                 };
 326
 327                 d10 {
 328                         label = "d10";
 329                         gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
 330                         linux,default-trigger = "heartbeat";
 331                 };
 332         };
 333
 334         sound {
 335                 compatible = "atmel,asoc-wm8904";
 336                 pinctrl-names = "default";
 337                 pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
 338
 339                 atmel,model = "wm8904 @ SAMA5D4EK";
 340                 atmel,audio-routing =
 341                         "Headphone Jack", "HPOUTL",
 342                         "Headphone Jack", "HPOUTR",
 343                         "IN1L", "Line In Jack",
 344                         "IN1R", "Line In Jack";
 345
 346                 atmel,ssc-controller = <&ssc0>;
 347                 atmel,audio-codec = <&wm8904>;
 348         };
 349 };