arch/arm/boot/dts/bcm283x.dtsi

   1 #include <dt-bindings/pinctrl/bcm2835.h>
   2 #include <dt-bindings/clock/bcm2835.h>
   3 #include <dt-bindings/clock/bcm2835-aux.h>
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include "skeleton.dtsi"
   6
   7 /* This include file covers the common peripherals and configuration between
   8  * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
   9  * bcm2835.dtsi and bcm2836.dtsi.
  10  */
  11
  12 / {
  13         compatible = "brcm,bcm2835";
  14         model = "BCM2835";
  15         interrupt-parent = <&intc>;
  16
  17         chosen {
  18                 bootargs = "earlyprintk console=ttyAMA0";
  19         };
  20
  21         soc {
  22                 compatible = "simple-bus";
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25
  26                 timer@7e003000 {
  27                         compatible = "brcm,bcm2835-system-timer";
  28                         reg = <0x7e003000 0x1000>;
  29                         interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
  30                         /* This could be a reference to BCM2835_CLOCK_TIMER,
  31                          * but we don't have the driver using the common clock
  32                          * support yet.
  33                          */
  34                         clock-frequency = <1000000>;
  35                 };
  36
  37                 dma: dma@7e007000 {
  38                         compatible = "brcm,bcm2835-dma";
  39                         reg = <0x7e007000 0xf00>;
  40                         interrupts = <1 16>,
  41                                      <1 17>,
  42                                      <1 18>,
  43                                      <1 19>,
  44                                      <1 20>,
  45                                      <1 21>,
  46                                      <1 22>,
  47                                      <1 23>,
  48                                      <1 24>,
  49                                      <1 25>,
  50                                      <1 26>,
  51                                      /* dma channel 11-14 share one irq */
  52                                      <1 27>,
  53                                      <1 27>,
  54                                      <1 27>,
  55                                      <1 27>,
  56                                      /* unused shared irq for all channels */
  57                                      <1 28>;
  58                         interrupt-names = "dma0",
  59                                           "dma1",
  60                                           "dma2",
  61                                           "dma3",
  62                                           "dma4",
  63                                           "dma5",
  64                                           "dma6",
  65                                           "dma7",
  66                                           "dma8",
  67                                           "dma9",
  68                                           "dma10",
  69                                           "dma11",
  70                                           "dma12",
  71                                           "dma13",
  72                                           "dma14",
  73                                           "dma-shared-all";
  74                         #dma-cells = <1>;
  75                         brcm,dma-channel-mask = <0x7f35>;
  76                 };
  77
  78                 intc: interrupt-controller@7e00b200 {
  79                         compatible = "brcm,bcm2835-armctrl-ic";
  80                         reg = <0x7e00b200 0x200>;
  81                         interrupt-controller;
  82                         #interrupt-cells = <2>;
  83                 };
  84
  85                 watchdog@7e100000 {
  86                         compatible = "brcm,bcm2835-pm-wdt";
  87                         reg = <0x7e100000 0x28>;
  88                 };
  89
  90                 clocks: cprman@7e101000 {
  91                         compatible = "brcm,bcm2835-cprman";
  92                         #clock-cells = <1>;
  93                         reg = <0x7e101000 0x2000>;
  94
  95                         /* CPRMAN derives everything from the platform's
  96                          * oscillator.
  97                          */
  98                         clocks = <&clk_osc>;
  99                 };
 100
 101                 rng@7e104000 {
 102                         compatible = "brcm,bcm2835-rng";
 103                         reg = <0x7e104000 0x10>;
 104                 };
 105
 106                 mailbox: mailbox@7e00b800 {
 107                         compatible = "brcm,bcm2835-mbox";
 108                         reg = <0x7e00b880 0x40>;
 109                         interrupts = <0 1>;
 110                         #mbox-cells = <0>;
 111                 };
 112
 113                 gpio: gpio@7e200000 {
 114                         compatible = "brcm,bcm2835-gpio";
 115                         reg = <0x7e200000 0xb4>;
 116                         /*
 117                          * The GPIO IP block is designed for 3 banks of GPIOs.
 118                          * Each bank has a GPIO interrupt for itself.
 119                          * There is an overall "any bank" interrupt.
 120                          * In order, these are GIC interrupts 17, 18, 19, 20.
 121                          * Since the BCM2835 only has 2 banks, the 2nd bank
 122                          * interrupt output appears to be mirrored onto the
 123                          * 3rd bank's interrupt signal.
 124                          * So, a bank0 interrupt shows up on 17, 20, and
 125                          * a bank1 interrupt shows up on 18, 19, 20!
 126                          */
 127                         interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
 128
 129                         gpio-controller;
 130                         #gpio-cells = <2>;
 131
 132                         interrupt-controller;
 133                         #interrupt-cells = <2>;
 134                 };
 135
 136                 uart0: serial@7e201000 {
 137                         compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
 138                         reg = <0x7e201000 0x1000>;
 139                         interrupts = <2 25>;
 140                         clocks = <&clocks BCM2835_CLOCK_UART>,
 141                                  <&clocks BCM2835_CLOCK_VPU>;
 142                         clock-names = "uartclk", "apb_pclk";
 143                         arm,primecell-periphid = <0x00241011>;
 144                 };
 145
 146                 i2s: i2s@7e203000 {
 147                         compatible = "brcm,bcm2835-i2s";
 148                         reg = <0x7e203000 0x20>,
 149                               <0x7e101098 0x02>;
 150
 151                         dmas = <&dma 2>,
 152                                <&dma 3>;
 153                         dma-names = "tx", "rx";
 154                         status = "disabled";
 155                 };
 156
 157                 spi: spi@7e204000 {
 158                         compatible = "brcm,bcm2835-spi";
 159                         reg = <0x7e204000 0x1000>;
 160                         interrupts = <2 22>;
 161                         clocks = <&clocks BCM2835_CLOCK_VPU>;
 162                         #address-cells = <1>;
 163                         #size-cells = <0>;
 164                         status = "disabled";
 165                 };
 166
 167                 i2c0: i2c@7e205000 {
 168                         compatible = "brcm,bcm2835-i2c";
 169                         reg = <0x7e205000 0x1000>;
 170                         interrupts = <2 21>;
 171                         clocks = <&clocks BCM2835_CLOCK_VPU>;
 172                         #address-cells = <1>;
 173                         #size-cells = <0>;
 174                         status = "disabled";
 175                 };
 176
 177                 pixelvalve@7e206000 {
 178                         compatible = "brcm,bcm2835-pixelvalve0";
 179                         reg = <0x7e206000 0x100>;
 180                         interrupts = <2 13>; /* pwa0 */
 181                 };
 182
 183                 pixelvalve@7e207000 {
 184                         compatible = "brcm,bcm2835-pixelvalve1";
 185                         reg = <0x7e207000 0x100>;
 186                         interrupts = <2 14>; /* pwa1 */
 187                 };
 188
 189                 aux: aux@0x7e215000 {
 190                         compatible = "brcm,bcm2835-aux";
 191                         #clock-cells = <1>;
 192                         reg = <0x7e215000 0x8>;
 193                         clocks = <&clocks BCM2835_CLOCK_VPU>;
 194                 };
 195
 196                 uart1: serial@7e215040 {
 197                         compatible = "brcm,bcm2835-aux-uart";
 198                         reg = <0x7e215040 0x40>;
 199                         interrupts = <1 29>;
 200                         clocks = <&aux BCM2835_AUX_CLOCK_UART>;
 201                         status = "disabled";
 202                 };
 203
 204                 spi1: spi@7e215080 {
 205                         compatible = "brcm,bcm2835-aux-spi";
 206                         reg = <0x7e215080 0x40>;
 207                         interrupts = <1 29>;
 208                         clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
 209                         #address-cells = <1>;
 210                         #size-cells = <0>;
 211                         status = "disabled";
 212                 };
 213
 214                 spi2: spi@7e2150c0 {
 215                         compatible = "brcm,bcm2835-aux-spi";
 216                         reg = <0x7e2150c0 0x40>;
 217                         interrupts = <1 29>;
 218                         clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
 219                         #address-cells = <1>;
 220                         #size-cells = <0>;
 221                         status = "disabled";
 222                 };
 223
 224                 pwm: pwm@7e20c000 {
 225                         compatible = "brcm,bcm2835-pwm";
 226                         reg = <0x7e20c000 0x28>;
 227                         clocks = <&clocks BCM2835_CLOCK_PWM>;
 228                         assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
 229                         assigned-clock-rates = <10000000>;
 230                         #pwm-cells = <2>;
 231                         status = "disabled";
 232                 };
 233
 234                 sdhci: sdhci@7e300000 {
 235                         compatible = "brcm,bcm2835-sdhci";
 236                         reg = <0x7e300000 0x100>;
 237                         interrupts = <2 30>;
 238                         clocks = <&clocks BCM2835_CLOCK_EMMC>;
 239                         status = "disabled";
 240                 };
 241
 242                 hvs@7e400000 {
 243                         compatible = "brcm,bcm2835-hvs";
 244                         reg = <0x7e400000 0x6000>;
 245                         interrupts = <2 1>;
 246                 };
 247
 248                 i2c1: i2c@7e804000 {
 249                         compatible = "brcm,bcm2835-i2c";
 250                         reg = <0x7e804000 0x1000>;
 251                         interrupts = <2 21>;
 252                         clocks = <&clocks BCM2835_CLOCK_VPU>;
 253                         #address-cells = <1>;
 254                         #size-cells = <0>;
 255                         status = "disabled";
 256                 };
 257
 258                 i2c2: i2c@7e805000 {
 259                         compatible = "brcm,bcm2835-i2c";
 260                         reg = <0x7e805000 0x1000>;
 261                         interrupts = <2 21>;
 262                         clocks = <&clocks BCM2835_CLOCK_VPU>;
 263                         #address-cells = <1>;
 264                         #size-cells = <0>;
 265                         status = "disabled";
 266                 };
 267
 268                 pixelvalve@7e807000 {
 269                         compatible = "brcm,bcm2835-pixelvalve2";
 270                         reg = <0x7e807000 0x100>;
 271                         interrupts = <2 10>; /* pixelvalve */
 272                 };
 273
 274                 hdmi: hdmi@7e902000 {
 275                         compatible = "brcm,bcm2835-hdmi";
 276                         reg = <0x7e902000 0x600>,
 277                               <0x7e808000 0x100>;
 278                         interrupts = <2 8>, <2 9>;
 279                         ddc = <&i2c2>;
 280                         clocks = <&clocks BCM2835_PLLH_PIX>,
 281                                  <&clocks BCM2835_CLOCK_HSM>;
 282                         clock-names = "pixel", "hdmi";
 283                         status = "disabled";
 284                 };
 285
 286                 usb: usb@7e980000 {
 287                         compatible = "brcm,bcm2835-usb";
 288                         reg = <0x7e980000 0x10000>;
 289                         interrupts = <1 9>;
 290                         #address-cells = <1>;
 291                         #size-cells = <0>;
 292                 };
 293
 294                 v3d: v3d@7ec00000 {
 295                         compatible = "brcm,bcm2835-v3d";
 296                         reg = <0x7ec00000 0x1000>;
 297                         interrupts = <1 10>;
 298                 };
 299
 300                 vc4: gpu {
 301                         compatible = "brcm,bcm2835-vc4";
 302                 };
 303         };
 304
 305         clocks {
 306                 compatible = "simple-bus";
 307                 #address-cells = <1>;
 308                 #size-cells = <0>;
 309
 310                 /* The oscillator is the root of the clock tree. */
 311                 clk_osc: clock@3 {
 312                         compatible = "fixed-clock";
 313                         reg = <3>;
 314                         #clock-cells = <0>;
 315                         clock-output-names = "osc";
 316                         clock-frequency = <19200000>;
 317                 };
 318
 319         };
 320 };