arch/arm/boot/dts/berlin2q-marvell-dmp.dts

   1 /*
   2  * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
   3  *
   4  * This file is licensed under the terms of the GNU General Public
   5  * License version 2. This program is licensed "as is" without any
   6  * warranty of any kind, whether express or implied.
   7  */
   8
   9 /dts-v1/;
  10
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include "berlin2q.dtsi"
  13
  14 / {
  15         model = "Marvell BG2-Q DMP";
  16         compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
  17
  18         memory {
  19                 device_type = "memory";
  20                 reg = <0x00000000 0x80000000>;
  21         };
  22
  23         choosen {
  24                 bootargs = "console=ttyS0,115200 earlyprintk";
  25         };
  26
  27         regulators {
  28                 compatible = "simple-bus";
  29                 #address-cells = <1>;
  30                 #size-cells = <0>;
  31
  32                 reg_usb0_vbus: regulator@0 {
  33                         compatible = "regulator-fixed";
  34                         regulator-name = "usb0_vbus";
  35                         regulator-min-microvolt = <5000000>;
  36                         regulator-max-microvolt = <5000000>;
  37                         gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
  38                         enable-active-high;
  39                 };
  40
  41                 reg_usb1_vbus: regulator@1 {
  42                         compatible = "regulator-fixed";
  43                         regulator-name = "usb1_vbus";
  44                         regulator-min-microvolt = <5000000>;
  45                         regulator-max-microvolt = <5000000>;
  46                         gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
  47                         enable-active-high;
  48                 };
  49
  50                 reg_usb2_vbus: regulator@2 {
  51                         compatible = "regulator-fixed";
  52                         regulator-name = "usb2_vbus";
  53                         regulator-min-microvolt = <5000000>;
  54                         regulator-max-microvolt = <5000000>;
  55                         gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
  56                         enable-active-high;
  57                 };
  58         };
  59 };
  60
  61 &sdhci1 {
  62         broken-cd;
  63         sdhci,wp-inverted;
  64         status = "okay";
  65 };
  66
  67 &sdhci2 {
  68         non-removable;
  69         status = "okay";
  70 };
  71
  72 &i2c0 {
  73         status = "okay";
  74 };
  75
  76 &i2c2 {
  77         status = "okay";
  78 };
  79
  80 &uart0 {
  81         status = "okay";
  82 };
  83
  84 &usb_phy0 {
  85         status = "okay";
  86 };
  87
  88 &usb_phy2 {
  89         status = "okay";
  90 };
  91
  92 &usb0 {
  93         vbus-supply = <&reg_usb0_vbus>;
  94         status = "okay";
  95 };
  96
  97 &usb2 {
  98         vbus-supply = <&reg_usb2_vbus>;
  99         status = "okay";
 100 };
 101
 102 &eth0 {
 103         status = "okay";
 104 };
 105
 106 &sata0 {
 107         status = "okay";
 108 };
 109
 110 &sata_phy {
 111         status = "okay";
 112 };