arch/arm/boot/dts/berlin2q-marvell-dmp.dts

   1 /*
   2  * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is licensed under the terms of the GNU General Public
  10  *     License version 2. This program is licensed "as is" without any
  11  *     warranty of any kind, whether express or implied.
  12  *
  13  * Or, alternatively,
  14  *
  15  *  b) Permission is hereby granted, free of charge, to any person
  16  *     obtaining a copy of this software and associated documentation
  17  *     files (the "Software"), to deal in the Software without
  18  *     restriction, including without limitation the rights to use,
  19  *     copy, modify, merge, publish, distribute, sublicense, and/or
  20  *     sell copies of the Software, and to permit persons to whom the
  21  *     Software is furnished to do so, subject to the following
  22  *     conditions:
  23  *
  24  *     The above copyright notice and this permission notice shall be
  25  *     included in all copies or substantial portions of the Software.
  26  *
  27  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  28  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  29  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  30  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  31  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  32  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  33  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  34  *     OTHER DEALINGS IN THE SOFTWARE.
  35  */
  36
  37 /dts-v1/;
  38
  39 #include <dt-bindings/gpio/gpio.h>
  40 #include "berlin2q.dtsi"
  41
  42 / {
  43         model = "Marvell BG2-Q DMP";
  44         compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
  45
  46         memory {
  47                 device_type = "memory";
  48                 reg = <0x00000000 0x80000000>;
  49         };
  50
  51         choosen {
  52                 bootargs = "console=ttyS0,115200 earlyprintk";
  53         };
  54
  55         regulators {
  56                 compatible = "simple-bus";
  57                 #address-cells = <1>;
  58                 #size-cells = <0>;
  59
  60                 reg_usb0_vbus: regulator@0 {
  61                         compatible = "regulator-fixed";
  62                         regulator-name = "usb0_vbus";
  63                         regulator-min-microvolt = <5000000>;
  64                         regulator-max-microvolt = <5000000>;
  65                         gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
  66                         enable-active-high;
  67                 };
  68
  69                 reg_usb1_vbus: regulator@1 {
  70                         compatible = "regulator-fixed";
  71                         regulator-name = "usb1_vbus";
  72                         regulator-min-microvolt = <5000000>;
  73                         regulator-max-microvolt = <5000000>;
  74                         gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
  75                         enable-active-high;
  76                 };
  77
  78                 reg_usb2_vbus: regulator@2 {
  79                         compatible = "regulator-fixed";
  80                         regulator-name = "usb2_vbus";
  81                         regulator-min-microvolt = <5000000>;
  82                         regulator-max-microvolt = <5000000>;
  83                         gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
  84                         enable-active-high;
  85                 };
  86         };
  87 };
  88
  89 &sdhci1 {
  90         broken-cd;
  91         sdhci,wp-inverted;
  92         status = "okay";
  93 };
  94
  95 &sdhci2 {
  96         broken-cd;
  97         bus-width = <8>;
  98         non-removable;
  99         status = "okay";
 100 };
 101
 102 &i2c0 {
 103         status = "okay";
 104 };
 105
 106 &i2c2 {
 107         status = "okay";
 108 };
 109
 110 &uart0 {
 111         status = "okay";
 112 };
 113
 114 &usb_phy0 {
 115         status = "okay";
 116 };
 117
 118 &usb_phy2 {
 119         status = "okay";
 120 };
 121
 122 &usb0 {
 123         vbus-supply = <&reg_usb0_vbus>;
 124         status = "okay";
 125 };
 126
 127 &usb2 {
 128         vbus-supply = <&reg_usb2_vbus>;
 129         status = "okay";
 130 };
 131
 132 &eth0 {
 133         status = "okay";
 134 };
 135
 136 &sata0 {
 137         status = "okay";
 138 };
 139
 140 &sata_phy {
 141         status = "okay";
 142 };