2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License version 2 as
4 * published by the Free Software Foundation.
11 model = "HP t410 Smart Zero Client";
12 compatible = "hp,t410", "ti,dm8148", "ti,dm814";
15 device_type = "memory";
16 reg = <0x80000000 0x40000000>; /* 1 GB */
19 /* gpio9 seems to control USB VBUS regulator and/or hub power */
20 usb_power: regulator@9 {
21 compatible = "regulator-fixed";
22 regulator-name = "usb_power";
23 regulator-min-microvolt = <5000000>;
24 regulator-max-microvolt = <5000000>;
25 gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
30 vmmcsd_fixed: fixedregulator0 {
31 compatible = "regulator-fixed";
32 regulator-name = "vmmcsd_fixed";
33 regulator-min-microvolt = <3300000>;
34 regulator-max-microvolt = <3300000>;
39 phy-handle = <ðphy0>;
44 phy-handle = <ðphy1>;
49 ethphy0: ethernet-phy@0 {
53 ethphy1: ethernet-phy@1 {
67 pinctrl-names = "default";
68 pinctrl-0 = <&sd2_pins>;
69 vmmc-supply = <&vmmcsd_fixed>;
71 dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */
72 &edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */
73 dma-names = "tx", "rx";
78 sd2_pins: pinmux_sd2_pins {
79 pinctrl-single,pins = <
80 DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[7] */
81 DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[6] */
82 DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[5] */
83 DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[4] */
84 DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[3] */
85 DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[2] */
86 DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[1] */
87 DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[0] */
88 DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1) /* SD2_CLK */
89 DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2) /* SD2_CMD */
90 DM814X_IOPAD(0x0920, PIN_INPUT | 0x40) /* SD2_SDCD */
94 usb0_pins: pinmux_usb0_pins {
95 pinctrl-single,pins = <
96 DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */
100 usb1_pins: pinmux_usb1_pins {
101 pinctrl-single,pins = <
102 DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */
108 pinctrl-names = "default";
109 pinctrl-0 = <&usb0_pins>;
114 pinctrl-names = "default";
115 pinctrl-0 = <&usb1_pins>;