arch/arm/boot/dts/dm816x.dtsi

   1 /*
   2  * This file is licensed under the terms of the GNU General Public License
   3  * version 2.  This program is licensed "as is" without any warranty of any
   4  * kind, whether express or implied.
   5  */
   6
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/pinctrl/omap.h>
   9
  10 / {
  11         compatible = "ti,dm816";
  12         interrupt-parent = <&intc>;
  13         #address-cells = <1>;
  14         #size-cells = <1>;
  15         chosen { };
  16
  17         aliases {
  18                 i2c0 = &i2c1;
  19                 i2c1 = &i2c2;
  20                 serial0 = &uart1;
  21                 serial1 = &uart2;
  22                 serial2 = &uart3;
  23                 ethernet0 = &eth0;
  24                 ethernet1 = &eth1;
  25         };
  26
  27         cpus {
  28                 #address-cells = <1>;
  29                 #size-cells = <0>;
  30                 cpu@0 {
  31                         compatible = "arm,cortex-a8";
  32                         device_type = "cpu";
  33                         reg = <0>;
  34                 };
  35         };
  36
  37         pmu {
  38                 compatible = "arm,cortex-a8-pmu";
  39                 interrupts = <3>;
  40         };
  41
  42         /*
  43          * The soc node represents the soc top level view. It is used for IPs
  44          * that are not memory mapped in the MPU view or for the MPU itself.
  45          */
  46         soc {
  47                 compatible = "ti,omap-infra";
  48                 mpu {
  49                         compatible = "ti,omap3-mpu";
  50                         ti,hwmods = "mpu";
  51                 };
  52         };
  53
  54         /*
  55          * XXX: Use a flat representation of the dm816x interconnect.
  56          * The real dm816x interconnect network is quite complex. Since
  57          * it will not bring real advantage to represent that in DT
  58          * for the moment, just use a fake OCP bus entry to represent
  59          * the whole bus hierarchy.
  60          */
  61         ocp {
  62                 compatible = "simple-bus";
  63                 reg = <0x44000000 0x10000>;
  64                 interrupts = <9 10>;
  65                 #address-cells = <1>;
  66                 #size-cells = <1>;
  67                 ranges;
  68
  69                 prcm: prcm@48180000 {
  70                         compatible = "ti,dm816-prcm";
  71                         reg = <0x48180000 0x4000>;
  72
  73                         prcm_clocks: clocks {
  74                                 #address-cells = <1>;
  75                                 #size-cells = <0>;
  76                         };
  77
  78                         prcm_clockdomains: clockdomains {
  79                         };
  80                 };
  81
  82                 scrm: scrm@48140000 {
  83                         compatible = "ti,dm816-scrm", "simple-bus";
  84                         reg = <0x48140000 0x21000>;
  85                         #address-cells = <1>;
  86                         #size-cells = <1>;
  87                         #pinctrl-cells = <1>;
  88                         ranges = <0 0x48140000 0x21000>;
  89
  90                         dm816x_pinmux: pinmux@800 {
  91                                 compatible = "pinctrl-single";
  92                                 reg = <0x800 0x50a>;
  93                                 #address-cells = <1>;
  94                                 #size-cells = <0>;
  95                                 #pinctrl-cells = <1>;
  96                                 pinctrl-single,register-width = <16>;
  97                                 pinctrl-single,function-mask = <0xf>;
  98                         };
  99
 100                         /* Device Configuration Registers */
 101                         scm_conf: syscon@600 {
 102                                 compatible = "syscon", "simple-bus";
 103                                 reg = <0x600 0x110>;
 104                                 #address-cells = <1>;
 105                                 #size-cells = <1>;
 106                                 ranges = <0 0x600 0x110>;
 107
 108                                 usb_phy0: usb-phy@20 {
 109                                         compatible = "ti,dm8168-usb-phy";
 110                                         reg = <0x20 0x8>;
 111                                         reg-names = "phy";
 112                                         clocks = <&main_fapll 6>;
 113                                         clock-names = "refclk";
 114                                         #phy-cells = <0>;
 115                                         syscon = <&scm_conf>;
 116                                 };
 117
 118                                 usb_phy1: usb-phy@28 {
 119                                         compatible = "ti,dm8168-usb-phy";
 120                                         reg = <0x28 0x8>;
 121                                         reg-names = "phy";
 122                                         clocks = <&main_fapll 6>;
 123                                         clock-names = "refclk";
 124                                         #phy-cells = <0>;
 125                                         syscon = <&scm_conf>;
 126                                 };
 127                         };
 128
 129                         scrm_clocks: clocks {
 130                                 #address-cells = <1>;
 131                                 #size-cells = <0>;
 132                         };
 133
 134                         scrm_clockdomains: clockdomains {
 135                         };
 136                 };
 137
 138                 edma: edma@49000000 {
 139                         compatible = "ti,edma3";
 140                         ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
 141                         reg =   <0x49000000 0x10000>,
 142                                 <0x44e10f90 0x40>;
 143                         interrupts = <12 13 14>;
 144                         #dma-cells = <1>;
 145                 };
 146
 147                 elm: elm@48080000 {
 148                         compatible = "ti,816-elm";
 149                         ti,hwmods = "elm";
 150                         reg = <0x48080000 0x2000>;
 151                         interrupts = <4>;
 152                 };
 153
 154                 gpio1: gpio@48032000 {
 155                         compatible = "ti,omap4-gpio";
 156                         ti,hwmods = "gpio1";
 157                         ti,gpio-always-on;
 158                         reg = <0x48032000 0x1000>;
 159                         interrupts = <96>;
 160                         gpio-controller;
 161                         #gpio-cells = <2>;
 162                         interrupt-controller;
 163                         #interrupt-cells = <2>;
 164                 };
 165
 166                 gpio2: gpio@4804c000 {
 167                         compatible = "ti,omap4-gpio";
 168                         ti,hwmods = "gpio2";
 169                         ti,gpio-always-on;
 170                         reg = <0x4804c000 0x1000>;
 171                         interrupts = <98>;
 172                         gpio-controller;
 173                         #gpio-cells = <2>;
 174                         interrupt-controller;
 175                         #interrupt-cells = <2>;
 176                 };
 177
 178                 gpmc: gpmc@50000000 {
 179                         compatible = "ti,am3352-gpmc";
 180                         ti,hwmods = "gpmc";
 181                         reg = <0x50000000 0x2000>;
 182                         #address-cells = <2>;
 183                         #size-cells = <1>;
 184                         interrupts = <100>;
 185                         dmas = <&edma 52>;
 186                         dma-names = "rxtx";
 187                         gpmc,num-cs = <6>;
 188                         gpmc,num-waitpins = <2>;
 189                         interrupt-controller;
 190                         #interrupt-cells = <2>;
 191                         gpio-controller;
 192                         #gpio-cells = <2>;
 193                 };
 194
 195                 i2c1: i2c@48028000 {
 196                         compatible = "ti,omap4-i2c";
 197                         ti,hwmods = "i2c1";
 198                         reg = <0x48028000 0x1000>;
 199                         #address-cells = <1>;
 200                         #size-cells = <0>;
 201                         interrupts = <70>;
 202                         dmas = <&edma 58 &edma 59>;
 203                         dma-names = "tx", "rx";
 204                 };
 205
 206                 i2c2: i2c@4802a000 {
 207                         compatible = "ti,omap4-i2c";
 208                         ti,hwmods = "i2c2";
 209                         reg = <0x4802a000 0x1000>;
 210                         #address-cells = <1>;
 211                         #size-cells = <0>;
 212                         interrupts = <71>;
 213                         dmas = <&edma 60 &edma 61>;
 214                         dma-names = "tx", "rx";
 215                 };
 216
 217                 intc: interrupt-controller@48200000 {
 218                         compatible = "ti,dm816-intc";
 219                         interrupt-controller;
 220                         #interrupt-cells = <1>;
 221                         reg = <0x48200000 0x1000>;
 222                 };
 223
 224                 rtc: rtc@480c0000 {
 225                         compatible = "ti,am3352-rtc", "ti,da830-rtc";
 226                         reg = <0x480c0000 0x1000>;
 227                         interrupts = <75 76>;
 228                         ti,hwmods = "rtc";
 229                 };
 230
 231                 mailbox: mailbox@480c8000 {
 232                         compatible = "ti,omap4-mailbox";
 233                         reg = <0x480c8000 0x2000>;
 234                         interrupts = <77>;
 235                         ti,hwmods = "mailbox";
 236                         #mbox-cells = <1>;
 237                         ti,mbox-num-users = <4>;
 238                         ti,mbox-num-fifos = <12>;
 239                         mbox_dsp: mbox_dsp {
 240                                 ti,mbox-tx = <3 0 0>;
 241                                 ti,mbox-rx = <0 0 0>;
 242                         };
 243                 };
 244
 245                 spinbox: spinbox@480ca000 {
 246                         compatible = "ti,omap4-hwspinlock";
 247                         reg = <0x480ca000 0x2000>;
 248                         ti,hwmods = "spinbox";
 249                         #hwlock-cells = <1>;
 250                 };
 251
 252                 mdio: mdio@4a100800 {
 253                         compatible = "ti,davinci_mdio";
 254                         #address-cells = <1>;
 255                         #size-cells = <0>;
 256                         reg = <0x4a100800 0x100>;
 257                         ti,hwmods = "davinci_mdio";
 258                         bus_freq = <1000000>;
 259                         phy0: ethernet-phy@0 {
 260                                 reg = <1>;
 261                         };
 262                         phy1: ethernet-phy@1 {
 263                                 reg = <2>;
 264                         };
 265                 };
 266
 267                 eth0: ethernet@4a100000 {
 268                         compatible = "ti,dm816-emac";
 269                         ti,hwmods = "emac0";
 270                         reg = <0x4a100000 0x800
 271                                0x4a100900 0x3700>;
 272                         clocks = <&sysclk24_ck>;
 273                         syscon = <&scm_conf>;
 274                         ti,davinci-ctrl-reg-offset = <0>;
 275                         ti,davinci-ctrl-mod-reg-offset = <0x900>;
 276                         ti,davinci-ctrl-ram-offset = <0x2000>;
 277                         ti,davinci-ctrl-ram-size = <0x2000>;
 278                         interrupts = <40 41 42 43>;
 279                         phy-handle = <&phy0>;
 280                 };
 281
 282                 eth1: ethernet@4a120000 {
 283                         compatible = "ti,dm816-emac";
 284                         ti,hwmods = "emac1";
 285                         reg = <0x4a120000 0x4000>;
 286                         clocks = <&sysclk24_ck>;
 287                         syscon = <&scm_conf>;
 288                         ti,davinci-ctrl-reg-offset = <0>;
 289                         ti,davinci-ctrl-mod-reg-offset = <0x900>;
 290                         ti,davinci-ctrl-ram-offset = <0x2000>;
 291                         ti,davinci-ctrl-ram-size = <0x2000>;
 292                         interrupts = <44 45 46 47>;
 293                         phy-handle = <&phy1>;
 294                 };
 295
 296                 sata: sata@4a140000 {
 297                         compatible = "ti,dm816-ahci";
 298                         reg = <0x4a140000 0x10000>;
 299                         interrupts = <16>;
 300                         ti,hwmods = "sata";
 301                 };
 302
 303                 mcspi1: spi@48030000 {
 304                         compatible = "ti,omap4-mcspi";
 305                         reg = <0x48030000 0x1000>;
 306                         #address-cells = <1>;
 307                         #size-cells = <0>;
 308                         interrupts = <65>;
 309                         ti,spi-num-cs = <4>;
 310                         ti,hwmods = "mcspi1";
 311                         dmas = <&edma 16 &edma 17
 312                                 &edma 18 &edma 19
 313                                 &edma 20 &edma 21
 314                                 &edma 22 &edma 23>;
 315                         dma-names = "tx0", "rx0", "tx1", "rx1",
 316                                     "tx2", "rx2", "tx3", "rx3";
 317                 };
 318
 319                 mmc1: mmc@48060000 {
 320                         compatible = "ti,omap4-hsmmc";
 321                         reg = <0x48060000 0x11000>;
 322                         ti,hwmods = "mmc1";
 323                         interrupts = <64>;
 324                         dmas = <&edma 24 &edma 25>;
 325                         dma-names = "tx", "rx";
 326                 };
 327
 328                 timer1: timer@4802e000 {
 329                         compatible = "ti,dm816-timer";
 330                         reg = <0x4802e000 0x2000>;
 331                         interrupts = <67>;
 332                         ti,hwmods = "timer1";
 333                         ti,timer-alwon;
 334                 };
 335
 336                 timer2: timer@48040000 {
 337                         compatible = "ti,dm816-timer";
 338                         reg = <0x48040000 0x2000>;
 339                         interrupts = <68>;
 340                         ti,hwmods = "timer2";
 341                 };
 342
 343                 timer3: timer@48042000 {
 344                         compatible = "ti,dm816-timer";
 345                         reg = <0x48042000 0x2000>;
 346                         interrupts = <69>;
 347                         ti,hwmods = "timer3";
 348                 };
 349
 350                 timer4: timer@48044000 {
 351                         compatible = "ti,dm816-timer";
 352                         reg = <0x48044000 0x2000>;
 353                         interrupts = <92>;
 354                         ti,hwmods = "timer4";
 355                         ti,timer-pwm;
 356                 };
 357
 358                 timer5: timer@48046000 {
 359                         compatible = "ti,dm816-timer";
 360                         reg = <0x48046000 0x2000>;
 361                         interrupts = <93>;
 362                         ti,hwmods = "timer5";
 363                         ti,timer-pwm;
 364                 };
 365
 366                 timer6: timer@48048000 {
 367                         compatible = "ti,dm816-timer";
 368                         reg = <0x48048000 0x2000>;
 369                         interrupts = <94>;
 370                         ti,hwmods = "timer6";
 371                         ti,timer-pwm;
 372                 };
 373
 374                 timer7: timer@4804a000 {
 375                         compatible = "ti,dm816-timer";
 376                         reg = <0x4804a000 0x2000>;
 377                         interrupts = <95>;
 378                         ti,hwmods = "timer7";
 379                         ti,timer-pwm;
 380                 };
 381
 382                 uart1: uart@48020000 {
 383                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 384                         ti,hwmods = "uart1";
 385                         reg = <0x48020000 0x2000>;
 386                         clock-frequency = <48000000>;
 387                         interrupts = <72>;
 388                         dmas = <&edma 26 &edma 27>;
 389                         dma-names = "tx", "rx";
 390                 };
 391
 392                 uart2: uart@48022000 {
 393                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 394                         ti,hwmods = "uart2";
 395                         reg = <0x48022000 0x2000>;
 396                         clock-frequency = <48000000>;
 397                         interrupts = <73>;
 398                         dmas = <&edma 28 &edma 29>;
 399                         dma-names = "tx", "rx";
 400                 };
 401
 402                 uart3: uart@48024000 {
 403                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 404                         ti,hwmods = "uart3";
 405                         reg = <0x48024000 0x2000>;
 406                         clock-frequency = <48000000>;
 407                         interrupts = <74>;
 408                         dmas = <&edma 30 &edma 31>;
 409                         dma-names = "tx", "rx";
 410                 };
 411
 412                 /* NOTE: USB needs a transceiver driver for phys to work */
 413                 usb: usb_otg_hs@47401000 {
 414                         compatible = "ti,am33xx-usb";
 415                         reg = <0x47401000 0x400000>;
 416                         ranges;
 417                         #address-cells = <1>;
 418                         #size-cells = <1>;
 419                         ti,hwmods = "usb_otg_hs";
 420
 421                         usb0: usb@47401000 {
 422                                 compatible = "ti,musb-dm816";
 423                                 reg = <0x47401400 0x400
 424                                        0x47401000 0x200>;
 425                                 reg-names = "mc", "control";
 426                                 interrupts = <18>;
 427                                 interrupt-names = "mc";
 428                                 dr_mode = "host";
 429                                 interface-type = <0>;
 430                                 phys = <&usb_phy0>;
 431                                 phy-names = "usb2-phy";
 432                                 mentor,multipoint = <1>;
 433                                 mentor,num-eps = <16>;
 434                                 mentor,ram-bits = <12>;
 435                                 mentor,power = <500>;
 436
 437                                 dmas = <&cppi41dma  0 0 &cppi41dma  1 0
 438                                         &cppi41dma  2 0 &cppi41dma  3 0
 439                                         &cppi41dma  4 0 &cppi41dma  5 0
 440                                         &cppi41dma  6 0 &cppi41dma  7 0
 441                                         &cppi41dma  8 0 &cppi41dma  9 0
 442                                         &cppi41dma 10 0 &cppi41dma 11 0
 443                                         &cppi41dma 12 0 &cppi41dma 13 0
 444                                         &cppi41dma 14 0 &cppi41dma  0 1
 445                                         &cppi41dma  1 1 &cppi41dma  2 1
 446                                         &cppi41dma  3 1 &cppi41dma  4 1
 447                                         &cppi41dma  5 1 &cppi41dma  6 1
 448                                         &cppi41dma  7 1 &cppi41dma  8 1
 449                                         &cppi41dma  9 1 &cppi41dma 10 1
 450                                         &cppi41dma 11 1 &cppi41dma 12 1
 451                                         &cppi41dma 13 1 &cppi41dma 14 1>;
 452                                 dma-names =
 453                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 454                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 455                                         "rx14", "rx15",
 456                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 457                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 458                                         "tx14", "tx15";
 459                         };
 460
 461                         usb1: usb@47401800 {
 462                                 compatible = "ti,musb-dm816";
 463                                 reg = <0x47401c00 0x400
 464                                        0x47401800 0x200>;
 465                                 reg-names = "mc", "control";
 466                                 interrupts = <19>;
 467                                 interrupt-names = "mc";
 468                                 dr_mode = "host";
 469                                 interface-type = <0>;
 470                                 phys = <&usb_phy1>;
 471                                 phy-names = "usb2-phy";
 472                                 mentor,multipoint = <1>;
 473                                 mentor,num-eps = <16>;
 474                                 mentor,ram-bits = <12>;
 475                                 mentor,power = <500>;
 476
 477                                 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
 478                                         &cppi41dma 17 0 &cppi41dma 18 0
 479                                         &cppi41dma 19 0 &cppi41dma 20 0
 480                                         &cppi41dma 21 0 &cppi41dma 22 0
 481                                         &cppi41dma 23 0 &cppi41dma 24 0
 482                                         &cppi41dma 25 0 &cppi41dma 26 0
 483                                         &cppi41dma 27 0 &cppi41dma 28 0
 484                                         &cppi41dma 29 0 &cppi41dma 15 1
 485                                         &cppi41dma 16 1 &cppi41dma 17 1
 486                                         &cppi41dma 18 1 &cppi41dma 19 1
 487                                         &cppi41dma 20 1 &cppi41dma 21 1
 488                                         &cppi41dma 22 1 &cppi41dma 23 1
 489                                         &cppi41dma 24 1 &cppi41dma 25 1
 490                                         &cppi41dma 26 1 &cppi41dma 27 1
 491                                         &cppi41dma 28 1 &cppi41dma 29 1>;
 492                                 dma-names =
 493                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 494                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 495                                         "rx14", "rx15",
 496                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 497                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 498                                         "tx14", "tx15";
 499                         };
 500
 501                         cppi41dma: dma-controller@47402000 {
 502                                 compatible = "ti,am3359-cppi41";
 503                                 reg =  <0x47400000 0x1000
 504                                         0x47402000 0x1000
 505                                         0x47403000 0x1000
 506                                         0x47404000 0x4000>;
 507                                 reg-names = "glue", "controller", "scheduler", "queuemgr";
 508                                 interrupts = <17>;
 509                                 interrupt-names = "glue";
 510                                 #dma-cells = <2>;
 511                                 #dma-channels = <30>;
 512                                 #dma-requests = <256>;
 513                         };
 514                 };
 515
 516                 wd_timer2: wd_timer@480c2000 {
 517                         compatible = "ti,omap3-wdt";
 518                         ti,hwmods = "wd_timer";
 519                         reg = <0x480c2000 0x1000>;
 520                         interrupts = <0>;
 521                 };
 522         };
 523 };
 524
 525 #include "dm816x-clocks.dtsi"