2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 * Based on "omap4.dtsi"
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #include <dt-bindings/pinctrl/dra.h>
13 #define MAX_SOURCES 400
19 compatible = "ti,dra7xx";
20 interrupt-parent = <&crossbar_mpu>;
39 ethernet0 = &cpsw_emac0;
40 ethernet1 = &cpsw_emac1;
47 compatible = "arm,armv7-timer";
48 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
49 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
50 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
51 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
52 interrupt-parent = <&gic>;
55 gic: interrupt-controller@48211000 {
56 compatible = "arm,cortex-a15-gic";
58 #interrupt-cells = <3>;
59 reg = <0x0 0x48211000 0x0 0x1000>,
60 <0x0 0x48212000 0x0 0x2000>,
61 <0x0 0x48214000 0x0 0x2000>,
62 <0x0 0x48216000 0x0 0x2000>;
63 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
64 interrupt-parent = <&gic>;
67 wakeupgen: interrupt-controller@48281000 {
68 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
70 #interrupt-cells = <3>;
71 reg = <0x0 0x48281000 0x0 0x1000>;
72 interrupt-parent = <&gic>;
81 compatible = "arm,cortex-a15";
90 clocks = <&dpll_mpu_ck>;
93 clock-latency = <300000>; /* From omap-cpufreq driver */
96 cooling-min-level = <0>;
97 cooling-max-level = <2>;
98 #cooling-cells = <2>; /* min followed by max */
103 * The soc node represents the soc top level view. It is used for IPs
104 * that are not memory mapped in the MPU view or for the MPU itself.
107 compatible = "ti,omap-infra";
109 compatible = "ti,omap5-mpu";
115 * XXX: Use a flat representation of the SOC interconnect.
116 * The real OMAP interconnect network is quite complex.
117 * Since it will not bring real advantage to represent that in DT for
118 * the moment, just use a fake OCP bus entry to represent the whole bus
122 compatible = "ti,dra7-l3-noc", "simple-bus";
123 #address-cells = <1>;
125 ranges = <0x0 0x0 0x0 0xc0000000>;
126 ti,hwmods = "l3_main_1", "l3_main_2";
127 reg = <0x0 0x44000000 0x0 0x1000000>,
128 <0x0 0x45000000 0x0 0x1000>;
129 interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
130 <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
132 l4_cfg: l4@4a000000 {
133 compatible = "ti,dra7-l4-cfg", "simple-bus";
134 #address-cells = <1>;
136 ranges = <0 0x4a000000 0x22c000>;
139 compatible = "ti,dra7-scm-core", "simple-bus";
140 reg = <0x2000 0x2000>;
141 #address-cells = <1>;
143 ranges = <0 0x2000 0x2000>;
145 scm_conf: scm_conf@0 {
146 compatible = "syscon", "simple-bus";
148 #address-cells = <1>;
150 ranges = <0 0x0 0x1400>;
152 pbias_regulator: pbias_regulator@e00 {
153 compatible = "ti,pbias-dra7", "ti,pbias-omap";
155 syscon = <&scm_conf>;
156 pbias_mmc_reg: pbias_mmc_omap5 {
157 regulator-name = "pbias_mmc_omap5";
158 regulator-min-microvolt = <1800000>;
159 regulator-max-microvolt = <3000000>;
163 scm_conf_clocks: clocks {
164 #address-cells = <1>;
169 dra7_pmx_core: pinmux@1400 {
170 compatible = "ti,dra7-padconf",
172 reg = <0x1400 0x0468>;
173 #address-cells = <1>;
175 #pinctrl-cells = <1>;
176 #interrupt-cells = <1>;
177 interrupt-controller;
178 pinctrl-single,register-width = <32>;
179 pinctrl-single,function-mask = <0x3fffffff>;
182 scm_conf1: scm_conf@1c04 {
183 compatible = "syscon";
184 reg = <0x1c04 0x0020>;
187 scm_conf_pcie: scm_conf@1c24 {
188 compatible = "syscon";
189 reg = <0x1c24 0x0024>;
192 sdma_xbar: dma-router@b78 {
193 compatible = "ti,dra7-dma-crossbar";
196 dma-requests = <205>;
197 ti,dma-safe-map = <0>;
198 dma-masters = <&sdma>;
201 edma_xbar: dma-router@c78 {
202 compatible = "ti,dra7-dma-crossbar";
205 dma-requests = <204>;
206 ti,dma-safe-map = <0>;
207 dma-masters = <&edma>;
211 cm_core_aon: cm_core_aon@5000 {
212 compatible = "ti,dra7-cm-core-aon";
213 reg = <0x5000 0x2000>;
215 cm_core_aon_clocks: clocks {
216 #address-cells = <1>;
220 cm_core_aon_clockdomains: clockdomains {
224 cm_core: cm_core@8000 {
225 compatible = "ti,dra7-cm-core";
226 reg = <0x8000 0x3000>;
228 cm_core_clocks: clocks {
229 #address-cells = <1>;
233 cm_core_clockdomains: clockdomains {
238 l4_wkup: l4@4ae00000 {
239 compatible = "ti,dra7-l4-wkup", "simple-bus";
240 #address-cells = <1>;
242 ranges = <0 0x4ae00000 0x3f000>;
244 counter32k: counter@4000 {
245 compatible = "ti,omap-counter32k";
247 ti,hwmods = "counter_32k";
251 compatible = "ti,dra7-prm";
252 reg = <0x6000 0x3000>;
253 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
256 #address-cells = <1>;
260 prm_clockdomains: clockdomains {
264 scm_wkup: scm_conf@c000 {
265 compatible = "syscon";
266 reg = <0xc000 0x1000>;
271 compatible = "simple-bus";
273 #address-cells = <1>;
274 ranges = <0x51000000 0x51000000 0x3000
275 0x0 0x20000000 0x10000000>;
276 pcie1: pcie@51000000 {
277 compatible = "ti,dra7-pcie";
278 reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
279 reg-names = "rc_dbics", "ti_conf", "config";
280 interrupts = <0 232 0x4>, <0 233 0x4>;
281 #address-cells = <3>;
284 ranges = <0x81000000 0 0 0x03000 0 0x00010000
285 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
286 #interrupt-cells = <1>;
288 linux,pci-domain = <0>;
291 phy-names = "pcie-phy0";
292 interrupt-map-mask = <0 0 0 7>;
293 interrupt-map = <0 0 0 1 &pcie1_intc 1>,
294 <0 0 0 2 &pcie1_intc 2>,
295 <0 0 0 3 &pcie1_intc 3>,
296 <0 0 0 4 &pcie1_intc 4>;
297 pcie1_intc: interrupt-controller {
298 interrupt-controller;
299 #address-cells = <0>;
300 #interrupt-cells = <1>;
306 compatible = "simple-bus";
308 #address-cells = <1>;
309 ranges = <0x51800000 0x51800000 0x3000
310 0x0 0x30000000 0x10000000>;
313 compatible = "ti,dra7-pcie";
314 reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
315 reg-names = "rc_dbics", "ti_conf", "config";
316 interrupts = <0 355 0x4>, <0 356 0x4>;
317 #address-cells = <3>;
320 ranges = <0x81000000 0 0 0x03000 0 0x00010000
321 0x82000000 0 0x30013000 0x13000 0 0xffed000>;
322 #interrupt-cells = <1>;
324 linux,pci-domain = <1>;
327 phy-names = "pcie-phy0";
328 interrupt-map-mask = <0 0 0 7>;
329 interrupt-map = <0 0 0 1 &pcie2_intc 1>,
330 <0 0 0 2 &pcie2_intc 2>,
331 <0 0 0 3 &pcie2_intc 3>,
332 <0 0 0 4 &pcie2_intc 4>;
333 pcie2_intc: interrupt-controller {
334 interrupt-controller;
335 #address-cells = <0>;
336 #interrupt-cells = <1>;
341 ocmcram1: ocmcram@40300000 {
342 compatible = "mmio-sram";
343 reg = <0x40300000 0x80000>;
344 ranges = <0x0 0x40300000 0x80000>;
345 #address-cells = <1>;
348 * This is a placeholder for an optional reserved
349 * region for use by secure software. The size
350 * of this region is not known until runtime so it
351 * is set as zero to either be updated to reserve
352 * space or left unchanged to leave all SRAM for use.
353 * On HS parts that that require the reserved region
354 * either the bootloader can update the size to
355 * the required amount or the node can be overridden
356 * from the board dts file for the secure platform.
359 compatible = "ti,secure-ram";
365 * NOTE: ocmcram2 and ocmcram3 are not available on all
366 * DRA7xx and AM57xx variants. Confirm availability in
367 * the data manual for the exact part number in use
368 * before enabling these nodes in the board dts file.
370 ocmcram2: ocmcram@40400000 {
372 compatible = "mmio-sram";
373 reg = <0x40400000 0x100000>;
374 ranges = <0x0 0x40400000 0x100000>;
375 #address-cells = <1>;
379 ocmcram3: ocmcram@40500000 {
381 compatible = "mmio-sram";
382 reg = <0x40500000 0x100000>;
383 ranges = <0x0 0x40500000 0x100000>;
384 #address-cells = <1>;
388 bandgap: bandgap@4a0021e0 {
389 reg = <0x4a0021e0 0xc
395 compatible = "ti,dra752-bandgap";
396 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
397 #thermal-sensor-cells = <1>;
400 dsp1_system: dsp_system@40d00000 {
401 compatible = "syscon";
402 reg = <0x40d00000 0x100>;
405 sdma: dma-controller@4a056000 {
406 compatible = "ti,omap4430-sdma";
407 reg = <0x4a056000 0x1000>;
408 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
409 <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
410 <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
411 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
414 dma-requests = <127>;
417 edma: edma@43300000 {
418 compatible = "ti,edma3-tpcc";
420 reg = <0x43300000 0x100000>;
421 reg-names = "edma3_cc";
422 interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
423 <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
424 <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
425 interrupt-names = "edma3_ccint", "edma3_mperr",
430 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
433 * memcpy is disabled, can be enabled with:
434 * ti,edma-memcpy-channels = <20 21>;
435 * for example. Note that these channels need to be
436 * masked in the xbar as well.
440 edma_tptc0: tptc@43400000 {
441 compatible = "ti,edma3-tptc";
443 reg = <0x43400000 0x100000>;
444 interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
445 interrupt-names = "edma3_tcerrint";
448 edma_tptc1: tptc@43500000 {
449 compatible = "ti,edma3-tptc";
451 reg = <0x43500000 0x100000>;
452 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
453 interrupt-names = "edma3_tcerrint";
456 gpio1: gpio@4ae10000 {
457 compatible = "ti,omap4-gpio";
458 reg = <0x4ae10000 0x200>;
459 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
463 interrupt-controller;
464 #interrupt-cells = <2>;
467 gpio2: gpio@48055000 {
468 compatible = "ti,omap4-gpio";
469 reg = <0x48055000 0x200>;
470 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
474 interrupt-controller;
475 #interrupt-cells = <2>;
478 gpio3: gpio@48057000 {
479 compatible = "ti,omap4-gpio";
480 reg = <0x48057000 0x200>;
481 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
485 interrupt-controller;
486 #interrupt-cells = <2>;
489 gpio4: gpio@48059000 {
490 compatible = "ti,omap4-gpio";
491 reg = <0x48059000 0x200>;
492 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
496 interrupt-controller;
497 #interrupt-cells = <2>;
500 gpio5: gpio@4805b000 {
501 compatible = "ti,omap4-gpio";
502 reg = <0x4805b000 0x200>;
503 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
507 interrupt-controller;
508 #interrupt-cells = <2>;
511 gpio6: gpio@4805d000 {
512 compatible = "ti,omap4-gpio";
513 reg = <0x4805d000 0x200>;
514 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
518 interrupt-controller;
519 #interrupt-cells = <2>;
522 gpio7: gpio@48051000 {
523 compatible = "ti,omap4-gpio";
524 reg = <0x48051000 0x200>;
525 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
529 interrupt-controller;
530 #interrupt-cells = <2>;
533 gpio8: gpio@48053000 {
534 compatible = "ti,omap4-gpio";
535 reg = <0x48053000 0x200>;
536 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
540 interrupt-controller;
541 #interrupt-cells = <2>;
544 uart1: serial@4806a000 {
545 compatible = "ti,dra742-uart", "ti,omap4-uart";
546 reg = <0x4806a000 0x100>;
547 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
549 clock-frequency = <48000000>;
551 dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
552 dma-names = "tx", "rx";
555 uart2: serial@4806c000 {
556 compatible = "ti,dra742-uart", "ti,omap4-uart";
557 reg = <0x4806c000 0x100>;
558 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
560 clock-frequency = <48000000>;
562 dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
563 dma-names = "tx", "rx";
566 uart3: serial@48020000 {
567 compatible = "ti,dra742-uart", "ti,omap4-uart";
568 reg = <0x48020000 0x100>;
569 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
571 clock-frequency = <48000000>;
573 dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
574 dma-names = "tx", "rx";
577 uart4: serial@4806e000 {
578 compatible = "ti,dra742-uart", "ti,omap4-uart";
579 reg = <0x4806e000 0x100>;
580 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
582 clock-frequency = <48000000>;
584 dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
585 dma-names = "tx", "rx";
588 uart5: serial@48066000 {
589 compatible = "ti,dra742-uart", "ti,omap4-uart";
590 reg = <0x48066000 0x100>;
591 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
593 clock-frequency = <48000000>;
595 dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
596 dma-names = "tx", "rx";
599 uart6: serial@48068000 {
600 compatible = "ti,dra742-uart", "ti,omap4-uart";
601 reg = <0x48068000 0x100>;
602 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
604 clock-frequency = <48000000>;
606 dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
607 dma-names = "tx", "rx";
610 uart7: serial@48420000 {
611 compatible = "ti,dra742-uart", "ti,omap4-uart";
612 reg = <0x48420000 0x100>;
613 interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
615 clock-frequency = <48000000>;
619 uart8: serial@48422000 {
620 compatible = "ti,dra742-uart", "ti,omap4-uart";
621 reg = <0x48422000 0x100>;
622 interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
624 clock-frequency = <48000000>;
628 uart9: serial@48424000 {
629 compatible = "ti,dra742-uart", "ti,omap4-uart";
630 reg = <0x48424000 0x100>;
631 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
633 clock-frequency = <48000000>;
637 uart10: serial@4ae2b000 {
638 compatible = "ti,dra742-uart", "ti,omap4-uart";
639 reg = <0x4ae2b000 0x100>;
640 interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
641 ti,hwmods = "uart10";
642 clock-frequency = <48000000>;
646 mailbox1: mailbox@4a0f4000 {
647 compatible = "ti,omap4-mailbox";
648 reg = <0x4a0f4000 0x200>;
649 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
650 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
651 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
652 ti,hwmods = "mailbox1";
654 ti,mbox-num-users = <3>;
655 ti,mbox-num-fifos = <8>;
659 mailbox2: mailbox@4883a000 {
660 compatible = "ti,omap4-mailbox";
661 reg = <0x4883a000 0x200>;
662 interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
663 <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
664 <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
665 <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
666 ti,hwmods = "mailbox2";
668 ti,mbox-num-users = <4>;
669 ti,mbox-num-fifos = <12>;
673 mailbox3: mailbox@4883c000 {
674 compatible = "ti,omap4-mailbox";
675 reg = <0x4883c000 0x200>;
676 interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
677 <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
678 <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
679 <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
680 ti,hwmods = "mailbox3";
682 ti,mbox-num-users = <4>;
683 ti,mbox-num-fifos = <12>;
687 mailbox4: mailbox@4883e000 {
688 compatible = "ti,omap4-mailbox";
689 reg = <0x4883e000 0x200>;
690 interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
691 <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
692 <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
693 <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
694 ti,hwmods = "mailbox4";
696 ti,mbox-num-users = <4>;
697 ti,mbox-num-fifos = <12>;
701 mailbox5: mailbox@48840000 {
702 compatible = "ti,omap4-mailbox";
703 reg = <0x48840000 0x200>;
704 interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
705 <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
706 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
707 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
708 ti,hwmods = "mailbox5";
710 ti,mbox-num-users = <4>;
711 ti,mbox-num-fifos = <12>;
715 mailbox6: mailbox@48842000 {
716 compatible = "ti,omap4-mailbox";
717 reg = <0x48842000 0x200>;
718 interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
719 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
720 <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
721 <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
722 ti,hwmods = "mailbox6";
724 ti,mbox-num-users = <4>;
725 ti,mbox-num-fifos = <12>;
729 mailbox7: mailbox@48844000 {
730 compatible = "ti,omap4-mailbox";
731 reg = <0x48844000 0x200>;
732 interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
733 <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
734 <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
735 <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
736 ti,hwmods = "mailbox7";
738 ti,mbox-num-users = <4>;
739 ti,mbox-num-fifos = <12>;
743 mailbox8: mailbox@48846000 {
744 compatible = "ti,omap4-mailbox";
745 reg = <0x48846000 0x200>;
746 interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
747 <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
748 <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
749 <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
750 ti,hwmods = "mailbox8";
752 ti,mbox-num-users = <4>;
753 ti,mbox-num-fifos = <12>;
757 mailbox9: mailbox@4885e000 {
758 compatible = "ti,omap4-mailbox";
759 reg = <0x4885e000 0x200>;
760 interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
761 <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
762 <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
763 <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
764 ti,hwmods = "mailbox9";
766 ti,mbox-num-users = <4>;
767 ti,mbox-num-fifos = <12>;
771 mailbox10: mailbox@48860000 {
772 compatible = "ti,omap4-mailbox";
773 reg = <0x48860000 0x200>;
774 interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
775 <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
776 <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
777 <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
778 ti,hwmods = "mailbox10";
780 ti,mbox-num-users = <4>;
781 ti,mbox-num-fifos = <12>;
785 mailbox11: mailbox@48862000 {
786 compatible = "ti,omap4-mailbox";
787 reg = <0x48862000 0x200>;
788 interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
789 <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
790 <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
791 <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
792 ti,hwmods = "mailbox11";
794 ti,mbox-num-users = <4>;
795 ti,mbox-num-fifos = <12>;
799 mailbox12: mailbox@48864000 {
800 compatible = "ti,omap4-mailbox";
801 reg = <0x48864000 0x200>;
802 interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
803 <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
804 <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
805 <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
806 ti,hwmods = "mailbox12";
808 ti,mbox-num-users = <4>;
809 ti,mbox-num-fifos = <12>;
813 mailbox13: mailbox@48802000 {
814 compatible = "ti,omap4-mailbox";
815 reg = <0x48802000 0x200>;
816 interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
817 <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
818 <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
819 <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
820 ti,hwmods = "mailbox13";
822 ti,mbox-num-users = <4>;
823 ti,mbox-num-fifos = <12>;
827 timer1: timer@4ae18000 {
828 compatible = "ti,omap5430-timer";
829 reg = <0x4ae18000 0x80>;
830 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
831 ti,hwmods = "timer1";
835 timer2: timer@48032000 {
836 compatible = "ti,omap5430-timer";
837 reg = <0x48032000 0x80>;
838 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
839 ti,hwmods = "timer2";
842 timer3: timer@48034000 {
843 compatible = "ti,omap5430-timer";
844 reg = <0x48034000 0x80>;
845 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
846 ti,hwmods = "timer3";
849 timer4: timer@48036000 {
850 compatible = "ti,omap5430-timer";
851 reg = <0x48036000 0x80>;
852 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
853 ti,hwmods = "timer4";
856 timer5: timer@48820000 {
857 compatible = "ti,omap5430-timer";
858 reg = <0x48820000 0x80>;
859 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
860 ti,hwmods = "timer5";
863 timer6: timer@48822000 {
864 compatible = "ti,omap5430-timer";
865 reg = <0x48822000 0x80>;
866 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
867 ti,hwmods = "timer6";
870 timer7: timer@48824000 {
871 compatible = "ti,omap5430-timer";
872 reg = <0x48824000 0x80>;
873 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
874 ti,hwmods = "timer7";
877 timer8: timer@48826000 {
878 compatible = "ti,omap5430-timer";
879 reg = <0x48826000 0x80>;
880 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
881 ti,hwmods = "timer8";
884 timer9: timer@4803e000 {
885 compatible = "ti,omap5430-timer";
886 reg = <0x4803e000 0x80>;
887 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
888 ti,hwmods = "timer9";
891 timer10: timer@48086000 {
892 compatible = "ti,omap5430-timer";
893 reg = <0x48086000 0x80>;
894 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
895 ti,hwmods = "timer10";
898 timer11: timer@48088000 {
899 compatible = "ti,omap5430-timer";
900 reg = <0x48088000 0x80>;
901 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
902 ti,hwmods = "timer11";
905 timer12: timer@4ae20000 {
906 compatible = "ti,omap5430-timer";
907 reg = <0x4ae20000 0x80>;
908 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
909 ti,hwmods = "timer12";
914 timer13: timer@48828000 {
915 compatible = "ti,omap5430-timer";
916 reg = <0x48828000 0x80>;
917 interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
918 ti,hwmods = "timer13";
921 timer14: timer@4882a000 {
922 compatible = "ti,omap5430-timer";
923 reg = <0x4882a000 0x80>;
924 interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
925 ti,hwmods = "timer14";
928 timer15: timer@4882c000 {
929 compatible = "ti,omap5430-timer";
930 reg = <0x4882c000 0x80>;
931 interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
932 ti,hwmods = "timer15";
935 timer16: timer@4882e000 {
936 compatible = "ti,omap5430-timer";
937 reg = <0x4882e000 0x80>;
938 interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
939 ti,hwmods = "timer16";
943 compatible = "ti,omap3-wdt";
944 reg = <0x4ae14000 0x80>;
945 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
946 ti,hwmods = "wd_timer2";
949 hwspinlock: spinlock@4a0f6000 {
950 compatible = "ti,omap4-hwspinlock";
951 reg = <0x4a0f6000 0x1000>;
952 ti,hwmods = "spinlock";
957 compatible = "ti,omap5-dmm";
958 reg = <0x4e000000 0x800>;
959 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
964 compatible = "ti,omap4-i2c";
965 reg = <0x48070000 0x100>;
966 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
967 #address-cells = <1>;
974 compatible = "ti,omap4-i2c";
975 reg = <0x48072000 0x100>;
976 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
977 #address-cells = <1>;
984 compatible = "ti,omap4-i2c";
985 reg = <0x48060000 0x100>;
986 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
987 #address-cells = <1>;
994 compatible = "ti,omap4-i2c";
995 reg = <0x4807a000 0x100>;
996 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
997 #address-cells = <1>;
1000 status = "disabled";
1003 i2c5: i2c@4807c000 {
1004 compatible = "ti,omap4-i2c";
1005 reg = <0x4807c000 0x100>;
1006 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
1007 #address-cells = <1>;
1010 status = "disabled";
1013 mmc1: mmc@4809c000 {
1014 compatible = "ti,omap4-hsmmc";
1015 reg = <0x4809c000 0x400>;
1016 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
1019 ti,needs-special-reset;
1020 dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
1021 dma-names = "tx", "rx";
1022 status = "disabled";
1023 pbias-supply = <&pbias_mmc_reg>;
1026 mmc2: mmc@480b4000 {
1027 compatible = "ti,omap4-hsmmc";
1028 reg = <0x480b4000 0x400>;
1029 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
1031 ti,needs-special-reset;
1032 dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
1033 dma-names = "tx", "rx";
1034 status = "disabled";
1037 mmc3: mmc@480ad000 {
1038 compatible = "ti,omap4-hsmmc";
1039 reg = <0x480ad000 0x400>;
1040 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
1042 ti,needs-special-reset;
1043 dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
1044 dma-names = "tx", "rx";
1045 status = "disabled";
1048 mmc4: mmc@480d1000 {
1049 compatible = "ti,omap4-hsmmc";
1050 reg = <0x480d1000 0x400>;
1051 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
1053 ti,needs-special-reset;
1054 dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
1055 dma-names = "tx", "rx";
1056 status = "disabled";
1059 mmu0_dsp1: mmu@40d01000 {
1060 compatible = "ti,dra7-dsp-iommu";
1061 reg = <0x40d01000 0x100>;
1062 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1063 ti,hwmods = "mmu0_dsp1";
1065 ti,syscon-mmuconfig = <&dsp1_system 0x0>;
1066 status = "disabled";
1069 mmu1_dsp1: mmu@40d02000 {
1070 compatible = "ti,dra7-dsp-iommu";
1071 reg = <0x40d02000 0x100>;
1072 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
1073 ti,hwmods = "mmu1_dsp1";
1075 ti,syscon-mmuconfig = <&dsp1_system 0x1>;
1076 status = "disabled";
1079 mmu_ipu1: mmu@58882000 {
1080 compatible = "ti,dra7-iommu";
1081 reg = <0x58882000 0x100>;
1082 interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
1083 ti,hwmods = "mmu_ipu1";
1085 ti,iommu-bus-err-back;
1086 status = "disabled";
1089 mmu_ipu2: mmu@55082000 {
1090 compatible = "ti,dra7-iommu";
1091 reg = <0x55082000 0x100>;
1092 interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
1093 ti,hwmods = "mmu_ipu2";
1095 ti,iommu-bus-err-back;
1096 status = "disabled";
1099 abb_mpu: regulator-abb-mpu {
1100 compatible = "ti,abb-v3";
1101 regulator-name = "abb_mpu";
1102 #address-cells = <0>;
1104 clocks = <&sys_clkin1>;
1105 ti,settling-time = <50>;
1106 ti,clock-cycles = <16>;
1108 reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
1109 <0x4ae06014 0x4>, <0x4a003b20 0xc>,
1111 reg-names = "setup-address", "control-address",
1112 "int-address", "efuse-address",
1114 ti,tranxdone-status-mask = <0x80>;
1115 /* LDOVBBMPU_FBB_MUX_CTRL */
1116 ti,ldovbb-override-mask = <0x400>;
1117 /* LDOVBBMPU_FBB_VSET_OUT */
1118 ti,ldovbb-vset-mask = <0x1F>;
1121 * NOTE: only FBB mode used but actual vset will
1122 * determine final biasing
1125 /*uV ABB efuse rbb_m fbb_m vset_m*/
1126 1060000 0 0x0 0 0x02000000 0x01F00000
1127 1160000 0 0x4 0 0x02000000 0x01F00000
1128 1210000 0 0x8 0 0x02000000 0x01F00000
1132 abb_ivahd: regulator-abb-ivahd {
1133 compatible = "ti,abb-v3";
1134 regulator-name = "abb_ivahd";
1135 #address-cells = <0>;
1137 clocks = <&sys_clkin1>;
1138 ti,settling-time = <50>;
1139 ti,clock-cycles = <16>;
1141 reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
1142 <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
1144 reg-names = "setup-address", "control-address",
1145 "int-address", "efuse-address",
1147 ti,tranxdone-status-mask = <0x40000000>;
1148 /* LDOVBBIVA_FBB_MUX_CTRL */
1149 ti,ldovbb-override-mask = <0x400>;
1150 /* LDOVBBIVA_FBB_VSET_OUT */
1151 ti,ldovbb-vset-mask = <0x1F>;
1154 * NOTE: only FBB mode used but actual vset will
1155 * determine final biasing
1158 /*uV ABB efuse rbb_m fbb_m vset_m*/
1159 1055000 0 0x0 0 0x02000000 0x01F00000
1160 1150000 0 0x4 0 0x02000000 0x01F00000
1161 1250000 0 0x8 0 0x02000000 0x01F00000
1165 abb_dspeve: regulator-abb-dspeve {
1166 compatible = "ti,abb-v3";
1167 regulator-name = "abb_dspeve";
1168 #address-cells = <0>;
1170 clocks = <&sys_clkin1>;
1171 ti,settling-time = <50>;
1172 ti,clock-cycles = <16>;
1174 reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
1175 <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
1177 reg-names = "setup-address", "control-address",
1178 "int-address", "efuse-address",
1180 ti,tranxdone-status-mask = <0x20000000>;
1181 /* LDOVBBDSPEVE_FBB_MUX_CTRL */
1182 ti,ldovbb-override-mask = <0x400>;
1183 /* LDOVBBDSPEVE_FBB_VSET_OUT */
1184 ti,ldovbb-vset-mask = <0x1F>;
1187 * NOTE: only FBB mode used but actual vset will
1188 * determine final biasing
1191 /*uV ABB efuse rbb_m fbb_m vset_m*/
1192 1055000 0 0x0 0 0x02000000 0x01F00000
1193 1150000 0 0x4 0 0x02000000 0x01F00000
1194 1250000 0 0x8 0 0x02000000 0x01F00000
1198 abb_gpu: regulator-abb-gpu {
1199 compatible = "ti,abb-v3";
1200 regulator-name = "abb_gpu";
1201 #address-cells = <0>;
1203 clocks = <&sys_clkin1>;
1204 ti,settling-time = <50>;
1205 ti,clock-cycles = <16>;
1207 reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
1208 <0x4ae06010 0x4>, <0x4a003b08 0xc>,
1210 reg-names = "setup-address", "control-address",
1211 "int-address", "efuse-address",
1213 ti,tranxdone-status-mask = <0x10000000>;
1214 /* LDOVBBGPU_FBB_MUX_CTRL */
1215 ti,ldovbb-override-mask = <0x400>;
1216 /* LDOVBBGPU_FBB_VSET_OUT */
1217 ti,ldovbb-vset-mask = <0x1F>;
1220 * NOTE: only FBB mode used but actual vset will
1221 * determine final biasing
1224 /*uV ABB efuse rbb_m fbb_m vset_m*/
1225 1090000 0 0x0 0 0x02000000 0x01F00000
1226 1210000 0 0x4 0 0x02000000 0x01F00000
1227 1280000 0 0x8 0 0x02000000 0x01F00000
1231 mcspi1: spi@48098000 {
1232 compatible = "ti,omap4-mcspi";
1233 reg = <0x48098000 0x200>;
1234 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
1235 #address-cells = <1>;
1237 ti,hwmods = "mcspi1";
1238 ti,spi-num-cs = <4>;
1239 dmas = <&sdma_xbar 35>,
1247 dma-names = "tx0", "rx0", "tx1", "rx1",
1248 "tx2", "rx2", "tx3", "rx3";
1249 status = "disabled";
1252 mcspi2: spi@4809a000 {
1253 compatible = "ti,omap4-mcspi";
1254 reg = <0x4809a000 0x200>;
1255 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
1256 #address-cells = <1>;
1258 ti,hwmods = "mcspi2";
1259 ti,spi-num-cs = <2>;
1260 dmas = <&sdma_xbar 43>,
1264 dma-names = "tx0", "rx0", "tx1", "rx1";
1265 status = "disabled";
1268 mcspi3: spi@480b8000 {
1269 compatible = "ti,omap4-mcspi";
1270 reg = <0x480b8000 0x200>;
1271 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1272 #address-cells = <1>;
1274 ti,hwmods = "mcspi3";
1275 ti,spi-num-cs = <2>;
1276 dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
1277 dma-names = "tx0", "rx0";
1278 status = "disabled";
1281 mcspi4: spi@480ba000 {
1282 compatible = "ti,omap4-mcspi";
1283 reg = <0x480ba000 0x200>;
1284 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1285 #address-cells = <1>;
1287 ti,hwmods = "mcspi4";
1288 ti,spi-num-cs = <1>;
1289 dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
1290 dma-names = "tx0", "rx0";
1291 status = "disabled";
1294 qspi: qspi@4b300000 {
1295 compatible = "ti,dra7xxx-qspi";
1296 reg = <0x4b300000 0x100>,
1297 <0x5c000000 0x4000000>;
1298 reg-names = "qspi_base", "qspi_mmap";
1299 syscon-chipselects = <&scm_conf 0x558>;
1300 #address-cells = <1>;
1303 clocks = <&qspi_gfclk_div>;
1304 clock-names = "fck";
1306 interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
1307 status = "disabled";
1312 compatible = "ti,omap-ocp2scp";
1313 #address-cells = <1>;
1316 reg = <0x4a090000 0x20>;
1317 ti,hwmods = "ocp2scp3";
1318 sata_phy: phy@4A096000 {
1319 compatible = "ti,phy-pipe3-sata";
1320 reg = <0x4A096000 0x80>, /* phy_rx */
1321 <0x4A096400 0x64>, /* phy_tx */
1322 <0x4A096800 0x40>; /* pll_ctrl */
1323 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1324 syscon-phy-power = <&scm_conf 0x374>;
1325 clocks = <&sys_clkin1>, <&sata_ref_clk>;
1326 clock-names = "sysclk", "refclk";
1327 syscon-pllreset = <&scm_conf 0x3fc>;
1331 pcie1_phy: pciephy@4a094000 {
1332 compatible = "ti,phy-pipe3-pcie";
1333 reg = <0x4a094000 0x80>, /* phy_rx */
1334 <0x4a094400 0x64>; /* phy_tx */
1335 reg-names = "phy_rx", "phy_tx";
1336 syscon-phy-power = <&scm_conf_pcie 0x1c>;
1337 syscon-pcs = <&scm_conf_pcie 0x10>;
1338 clocks = <&dpll_pcie_ref_ck>,
1339 <&dpll_pcie_ref_m2ldo_ck>,
1340 <&optfclk_pciephy1_32khz>,
1341 <&optfclk_pciephy1_clk>,
1342 <&optfclk_pciephy1_div_clk>,
1343 <&optfclk_pciephy_div>,
1345 clock-names = "dpll_ref", "dpll_ref_m2",
1346 "wkupclk", "refclk",
1347 "div-clk", "phy-div", "sysclk";
1351 pcie2_phy: pciephy@4a095000 {
1352 compatible = "ti,phy-pipe3-pcie";
1353 reg = <0x4a095000 0x80>, /* phy_rx */
1354 <0x4a095400 0x64>; /* phy_tx */
1355 reg-names = "phy_rx", "phy_tx";
1356 syscon-phy-power = <&scm_conf_pcie 0x20>;
1357 syscon-pcs = <&scm_conf_pcie 0x10>;
1358 clocks = <&dpll_pcie_ref_ck>,
1359 <&dpll_pcie_ref_m2ldo_ck>,
1360 <&optfclk_pciephy2_32khz>,
1361 <&optfclk_pciephy2_clk>,
1362 <&optfclk_pciephy2_div_clk>,
1363 <&optfclk_pciephy_div>,
1365 clock-names = "dpll_ref", "dpll_ref_m2",
1366 "wkupclk", "refclk",
1367 "div-clk", "phy-div", "sysclk";
1369 status = "disabled";
1373 sata: sata@4a141100 {
1374 compatible = "snps,dwc-ahci";
1375 reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
1376 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
1378 phy-names = "sata-phy";
1379 clocks = <&sata_ref_clk>;
1381 ports-implemented = <0x1>;
1385 compatible = "ti,am3352-rtc";
1386 reg = <0x48838000 0x100>;
1387 interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
1388 <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
1389 ti,hwmods = "rtcss";
1390 clocks = <&sys_32k_ck>;
1395 compatible = "ti,omap-ocp2scp";
1396 #address-cells = <1>;
1399 reg = <0x4a080000 0x20>;
1400 ti,hwmods = "ocp2scp1";
1402 usb2_phy1: phy@4a084000 {
1403 compatible = "ti,dra7x-usb2", "ti,omap-usb2";
1404 reg = <0x4a084000 0x400>;
1405 syscon-phy-power = <&scm_conf 0x300>;
1406 clocks = <&usb_phy1_always_on_clk32k>,
1407 <&usb_otg_ss1_refclk960m>;
1408 clock-names = "wkupclk",
1413 usb2_phy2: phy@4a085000 {
1414 compatible = "ti,dra7x-usb2-phy2",
1416 reg = <0x4a085000 0x400>;
1417 syscon-phy-power = <&scm_conf 0xe74>;
1418 clocks = <&usb_phy2_always_on_clk32k>,
1419 <&usb_otg_ss2_refclk960m>;
1420 clock-names = "wkupclk",
1425 usb3_phy1: phy@4a084400 {
1426 compatible = "ti,omap-usb3";
1427 reg = <0x4a084400 0x80>,
1430 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1431 syscon-phy-power = <&scm_conf 0x370>;
1432 clocks = <&usb_phy3_always_on_clk32k>,
1434 <&usb_otg_ss1_refclk960m>;
1435 clock-names = "wkupclk",
1442 omap_dwc3_1: omap_dwc3_1@48880000 {
1443 compatible = "ti,dwc3";
1444 ti,hwmods = "usb_otg_ss1";
1445 reg = <0x48880000 0x10000>;
1446 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1447 #address-cells = <1>;
1451 usb1: usb@48890000 {
1452 compatible = "snps,dwc3";
1453 reg = <0x48890000 0x17000>;
1454 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1455 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1456 <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1457 interrupt-names = "peripheral",
1460 phys = <&usb2_phy1>, <&usb3_phy1>;
1461 phy-names = "usb2-phy", "usb3-phy";
1462 maximum-speed = "super-speed";
1464 snps,dis_u3_susphy_quirk;
1465 snps,dis_u2_susphy_quirk;
1469 omap_dwc3_2: omap_dwc3_2@488c0000 {
1470 compatible = "ti,dwc3";
1471 ti,hwmods = "usb_otg_ss2";
1472 reg = <0x488c0000 0x10000>;
1473 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1474 #address-cells = <1>;
1478 usb2: usb@488d0000 {
1479 compatible = "snps,dwc3";
1480 reg = <0x488d0000 0x17000>;
1481 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1482 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1483 <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1484 interrupt-names = "peripheral",
1487 phys = <&usb2_phy2>;
1488 phy-names = "usb2-phy";
1489 maximum-speed = "high-speed";
1491 snps,dis_u3_susphy_quirk;
1492 snps,dis_u2_susphy_quirk;
1496 /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
1497 omap_dwc3_3: omap_dwc3_3@48900000 {
1498 compatible = "ti,dwc3";
1499 ti,hwmods = "usb_otg_ss3";
1500 reg = <0x48900000 0x10000>;
1501 interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1502 #address-cells = <1>;
1506 status = "disabled";
1507 usb3: usb@48910000 {
1508 compatible = "snps,dwc3";
1509 reg = <0x48910000 0x17000>;
1510 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1511 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1512 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1513 interrupt-names = "peripheral",
1516 maximum-speed = "high-speed";
1518 snps,dis_u3_susphy_quirk;
1519 snps,dis_u2_susphy_quirk;
1524 compatible = "ti,am3352-elm";
1525 reg = <0x48078000 0xfc0>; /* device IO registers */
1526 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
1528 status = "disabled";
1531 gpmc: gpmc@50000000 {
1532 compatible = "ti,am3352-gpmc";
1534 reg = <0x50000000 0x37c>; /* device IO registers */
1535 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
1536 dmas = <&edma_xbar 4 0>;
1539 gpmc,num-waitpins = <2>;
1540 #address-cells = <2>;
1542 interrupt-controller;
1543 #interrupt-cells = <2>;
1546 status = "disabled";
1550 compatible = "ti,dra7-atl";
1551 reg = <0x4843c000 0x3ff>;
1553 ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
1554 <&atl_clkin2_ck>, <&atl_clkin3_ck>;
1555 clocks = <&atl_gfclk_mux>;
1556 clock-names = "fck";
1557 status = "disabled";
1560 mcasp1: mcasp@48460000 {
1561 compatible = "ti,dra7-mcasp-audio";
1562 ti,hwmods = "mcasp1";
1563 reg = <0x48460000 0x2000>,
1564 <0x45800000 0x1000>;
1565 reg-names = "mpu","dat";
1566 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1567 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
1568 interrupt-names = "tx", "rx";
1569 dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
1570 dma-names = "tx", "rx";
1571 clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
1572 <&mcasp1_ahclkr_mux>;
1573 clock-names = "fck", "ahclkx", "ahclkr";
1574 status = "disabled";
1577 mcasp2: mcasp@48464000 {
1578 compatible = "ti,dra7-mcasp-audio";
1579 ti,hwmods = "mcasp2";
1580 reg = <0x48464000 0x2000>,
1581 <0x45c00000 0x1000>;
1582 reg-names = "mpu","dat";
1583 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
1584 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
1585 interrupt-names = "tx", "rx";
1586 dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
1587 dma-names = "tx", "rx";
1588 clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
1589 <&mcasp2_ahclkr_mux>;
1590 clock-names = "fck", "ahclkx", "ahclkr";
1591 status = "disabled";
1594 mcasp3: mcasp@48468000 {
1595 compatible = "ti,dra7-mcasp-audio";
1596 ti,hwmods = "mcasp3";
1597 reg = <0x48468000 0x2000>,
1598 <0x46000000 0x1000>;
1599 reg-names = "mpu","dat";
1600 interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
1601 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
1602 interrupt-names = "tx", "rx";
1603 dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
1604 dma-names = "tx", "rx";
1605 clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
1606 clock-names = "fck", "ahclkx";
1607 status = "disabled";
1610 mcasp4: mcasp@4846c000 {
1611 compatible = "ti,dra7-mcasp-audio";
1612 ti,hwmods = "mcasp4";
1613 reg = <0x4846c000 0x2000>,
1614 <0x48436000 0x1000>;
1615 reg-names = "mpu","dat";
1616 interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
1617 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
1618 interrupt-names = "tx", "rx";
1619 dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
1620 dma-names = "tx", "rx";
1621 clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
1622 clock-names = "fck", "ahclkx";
1623 status = "disabled";
1626 mcasp5: mcasp@48470000 {
1627 compatible = "ti,dra7-mcasp-audio";
1628 ti,hwmods = "mcasp5";
1629 reg = <0x48470000 0x2000>,
1630 <0x4843a000 0x1000>;
1631 reg-names = "mpu","dat";
1632 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
1633 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
1634 interrupt-names = "tx", "rx";
1635 dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
1636 dma-names = "tx", "rx";
1637 clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
1638 clock-names = "fck", "ahclkx";
1639 status = "disabled";
1642 mcasp6: mcasp@48474000 {
1643 compatible = "ti,dra7-mcasp-audio";
1644 ti,hwmods = "mcasp6";
1645 reg = <0x48474000 0x2000>,
1646 <0x4844c000 0x1000>;
1647 reg-names = "mpu","dat";
1648 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
1649 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
1650 interrupt-names = "tx", "rx";
1651 dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
1652 dma-names = "tx", "rx";
1653 clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
1654 clock-names = "fck", "ahclkx";
1655 status = "disabled";
1658 mcasp7: mcasp@48478000 {
1659 compatible = "ti,dra7-mcasp-audio";
1660 ti,hwmods = "mcasp7";
1661 reg = <0x48478000 0x2000>,
1662 <0x48450000 0x1000>;
1663 reg-names = "mpu","dat";
1664 interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
1665 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
1666 interrupt-names = "tx", "rx";
1667 dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
1668 dma-names = "tx", "rx";
1669 clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
1670 clock-names = "fck", "ahclkx";
1671 status = "disabled";
1674 mcasp8: mcasp@4847c000 {
1675 compatible = "ti,dra7-mcasp-audio";
1676 ti,hwmods = "mcasp8";
1677 reg = <0x4847c000 0x2000>,
1678 <0x48454000 0x1000>;
1679 reg-names = "mpu","dat";
1680 interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
1681 <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
1682 interrupt-names = "tx", "rx";
1683 dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
1684 dma-names = "tx", "rx";
1685 clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
1686 clock-names = "fck", "ahclkx";
1687 status = "disabled";
1690 crossbar_mpu: crossbar@4a002a48 {
1691 compatible = "ti,irq-crossbar";
1692 reg = <0x4a002a48 0x130>;
1693 interrupt-controller;
1694 interrupt-parent = <&wakeupgen>;
1695 #interrupt-cells = <3>;
1696 ti,max-irqs = <160>;
1697 ti,max-crossbar-sources = <MAX_SOURCES>;
1699 ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
1700 ti,irqs-skip = <10 133 139 140>;
1701 ti,irqs-safe-map = <0>;
1704 mac: ethernet@48484000 {
1705 compatible = "ti,dra7-cpsw","ti,cpsw";
1707 clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>;
1708 clock-names = "fck", "cpts";
1709 cpdma_channels = <8>;
1710 ale_entries = <1024>;
1711 bd_ram_size = <0x2000>;
1712 mac_control = <0x20>;
1715 cpts_clock_mult = <0x784CFE14>;
1716 cpts_clock_shift = <29>;
1717 reg = <0x48484000 0x1000
1719 #address-cells = <1>;
1723 * Do not allow gating of cpsw clock as workaround
1724 * for errata i877. Keeping internal clock disabled
1725 * causes the device switching characteristics
1726 * to degrade over time and eventually fail to meet
1727 * the data manual delay time/skew specs.
1737 interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
1738 <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
1739 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
1740 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
1742 syscon = <&scm_conf>;
1743 status = "disabled";
1745 davinci_mdio: mdio@48485000 {
1746 compatible = "ti,cpsw-mdio","ti,davinci_mdio";
1747 #address-cells = <1>;
1749 ti,hwmods = "davinci_mdio";
1750 bus_freq = <1000000>;
1751 reg = <0x48485000 0x100>;
1754 cpsw_emac0: slave@48480200 {
1755 /* Filled in by U-Boot */
1756 mac-address = [ 00 00 00 00 00 00 ];
1759 cpsw_emac1: slave@48480300 {
1760 /* Filled in by U-Boot */
1761 mac-address = [ 00 00 00 00 00 00 ];
1764 phy_sel: cpsw-phy-sel@4a002554 {
1765 compatible = "ti,dra7xx-cpsw-phy-sel";
1766 reg= <0x4a002554 0x4>;
1767 reg-names = "gmii-sel";
1771 dcan1: can@481cc000 {
1772 compatible = "ti,dra7-d_can";
1773 ti,hwmods = "dcan1";
1774 reg = <0x4ae3c000 0x2000>;
1775 syscon-raminit = <&scm_conf 0x558 0>;
1776 interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
1777 clocks = <&dcan1_sys_clk_mux>;
1778 status = "disabled";
1781 dcan2: can@481d0000 {
1782 compatible = "ti,dra7-d_can";
1783 ti,hwmods = "dcan2";
1784 reg = <0x48480000 0x2000>;
1785 syscon-raminit = <&scm_conf 0x558 1>;
1786 interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
1787 clocks = <&sys_clkin1>;
1788 status = "disabled";
1792 compatible = "ti,dra7-dss";
1793 /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
1794 /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
1795 status = "disabled";
1796 ti,hwmods = "dss_core";
1797 /* CTRL_CORE_DSS_PLL_CONTROL */
1798 syscon-pll-ctrl = <&scm_conf 0x538>;
1799 #address-cells = <1>;
1804 compatible = "ti,dra7-dispc";
1805 reg = <0x58001000 0x1000>;
1806 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
1807 ti,hwmods = "dss_dispc";
1808 clocks = <&dss_dss_clk>;
1809 clock-names = "fck";
1810 /* CTRL_CORE_SMA_SW_1 */
1811 syscon-pol = <&scm_conf 0x534>;
1814 hdmi: encoder@58060000 {
1815 compatible = "ti,dra7-hdmi";
1816 reg = <0x58040000 0x200>,
1819 <0x58060000 0x19000>;
1820 reg-names = "wp", "pll", "phy", "core";
1821 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1822 status = "disabled";
1823 ti,hwmods = "dss_hdmi";
1824 clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>;
1825 clock-names = "fck", "sys_clk";
1829 epwmss0: epwmss@4843e000 {
1830 compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1831 reg = <0x4843e000 0x30>;
1832 ti,hwmods = "epwmss0";
1833 #address-cells = <1>;
1835 status = "disabled";
1838 ehrpwm0: pwm@4843e200 {
1839 compatible = "ti,dra746-ehrpwm",
1842 reg = <0x4843e200 0x80>;
1843 clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
1844 clock-names = "tbclk", "fck";
1845 status = "disabled";
1848 ecap0: ecap@4843e100 {
1849 compatible = "ti,dra746-ecap",
1852 reg = <0x4843e100 0x80>;
1853 clocks = <&l4_root_clk_div>;
1854 clock-names = "fck";
1855 status = "disabled";
1859 epwmss1: epwmss@48440000 {
1860 compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1861 reg = <0x48440000 0x30>;
1862 ti,hwmods = "epwmss1";
1863 #address-cells = <1>;
1865 status = "disabled";
1868 ehrpwm1: pwm@48440200 {
1869 compatible = "ti,dra746-ehrpwm",
1872 reg = <0x48440200 0x80>;
1873 clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
1874 clock-names = "tbclk", "fck";
1875 status = "disabled";
1878 ecap1: ecap@48440100 {
1879 compatible = "ti,dra746-ecap",
1882 reg = <0x48440100 0x80>;
1883 clocks = <&l4_root_clk_div>;
1884 clock-names = "fck";
1885 status = "disabled";
1889 epwmss2: epwmss@48442000 {
1890 compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1891 reg = <0x48442000 0x30>;
1892 ti,hwmods = "epwmss2";
1893 #address-cells = <1>;
1895 status = "disabled";
1898 ehrpwm2: pwm@48442200 {
1899 compatible = "ti,dra746-ehrpwm",
1902 reg = <0x48442200 0x80>;
1903 clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
1904 clock-names = "tbclk", "fck";
1905 status = "disabled";
1908 ecap2: ecap@48442100 {
1909 compatible = "ti,dra746-ecap",
1912 reg = <0x48442100 0x80>;
1913 clocks = <&l4_root_clk_div>;
1914 clock-names = "fck";
1915 status = "disabled";
1919 aes1: aes@4b500000 {
1920 compatible = "ti,omap4-aes";
1922 reg = <0x4b500000 0xa0>;
1923 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
1924 dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
1925 dma-names = "tx", "rx";
1926 clocks = <&l3_iclk_div>;
1927 clock-names = "fck";
1930 aes2: aes@4b700000 {
1931 compatible = "ti,omap4-aes";
1933 reg = <0x4b700000 0xa0>;
1934 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
1935 dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
1936 dma-names = "tx", "rx";
1937 clocks = <&l3_iclk_div>;
1938 clock-names = "fck";
1942 compatible = "ti,omap4-des";
1944 reg = <0x480a5000 0xa0>;
1945 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
1946 dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
1947 dma-names = "tx", "rx";
1948 clocks = <&l3_iclk_div>;
1949 clock-names = "fck";
1952 sham: sham@53100000 {
1953 compatible = "ti,omap5-sham";
1955 reg = <0x4b101000 0x300>;
1956 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
1957 dmas = <&edma_xbar 119 0>;
1959 clocks = <&l3_iclk_div>;
1960 clock-names = "fck";
1964 compatible = "ti,omap4-rng";
1966 reg = <0x48090000 0x2000>;
1967 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
1968 clocks = <&l3_iclk_div>;
1969 clock-names = "fck";
1973 thermal_zones: thermal-zones {
1974 #include "omap4-cpu-thermal.dtsi"
1975 #include "omap5-gpu-thermal.dtsi"
1976 #include "omap5-core-thermal.dtsi"
1977 #include "dra7-dspeve-thermal.dtsi"
1978 #include "dra7-iva-thermal.dtsi"
1984 polling-delay = <500>; /* milliseconds */
1987 /include/ "dra7xx-clocks.dtsi"