2 * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
12 #include <dt-bindings/gpio/gpio.h>
13 #include "imx25-pinfunc.h"
19 * The decompressor and also some bootloaders rely on a
20 * pre-existing /chosen node to be available to insert the
21 * command line and merge other ATAGS info.
22 * Also for U-Boot there must be a pre-existing /memory node.
25 memory { device_type = "memory"; reg = <0 0>; };
59 compatible = "arm,arm926ej-s";
65 asic: asic-interrupt-controller@68000000 {
66 compatible = "fsl,imx25-asic", "fsl,avic";
68 #interrupt-cells = <1>;
69 reg = <0x68000000 0x8000000>;
77 compatible = "fsl,imx-osc", "fixed-clock";
79 clock-frequency = <24000000>;
86 compatible = "simple-bus";
87 interrupt-parent = <&asic>;
90 aips@43f00000 { /* AIPS1 */
91 compatible = "fsl,aips-bus", "simple-bus";
94 reg = <0x43f00000 0x100000>;
97 aips1: bridge@43f00000 {
98 compatible = "fsl,imx25-aips";
99 reg = <0x43f00000 0x4000>;
103 #address-cells = <1>;
105 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
106 reg = <0x43f80000 0x4000>;
114 #address-cells = <1>;
116 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
117 reg = <0x43f84000 0x4000>;
125 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
126 reg = <0x43f88000 0x4000>;
128 clocks = <&clks 75>, <&clks 75>;
129 clock-names = "ipg", "per";
134 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
135 reg = <0x43f8c000 0x4000>;
137 clocks = <&clks 76>, <&clks 76>;
138 clock-names = "ipg", "per";
142 uart1: serial@43f90000 {
143 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
144 reg = <0x43f90000 0x4000>;
146 clocks = <&clks 120>, <&clks 57>;
147 clock-names = "ipg", "per";
151 uart2: serial@43f94000 {
152 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
153 reg = <0x43f94000 0x4000>;
155 clocks = <&clks 121>, <&clks 57>;
156 clock-names = "ipg", "per";
161 #address-cells = <1>;
163 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
164 reg = <0x43f98000 0x4000>;
172 #address-cells = <1>;
174 reg = <0x43f9c000 0x4000>;
181 spi1: cspi@43fa4000 {
182 #address-cells = <1>;
184 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
185 reg = <0x43fa4000 0x4000>;
186 clocks = <&clks 78>, <&clks 78>;
187 clock-names = "ipg", "per";
193 #address-cells = <1>;
195 compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
196 reg = <0x43fa8000 0x4000>;
197 clocks = <&clks 102>;
203 iomuxc: iomuxc@43fac000 {
204 compatible = "fsl,imx25-iomuxc";
205 reg = <0x43fac000 0x4000>;
208 audmux: audmux@43fb0000 {
209 compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
210 reg = <0x43fb0000 0x4000>;
216 compatible = "fsl,spba-bus", "simple-bus";
217 #address-cells = <1>;
219 reg = <0x50000000 0x40000>;
222 spi3: cspi@50004000 {
223 #address-cells = <1>;
225 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
226 reg = <0x50004000 0x4000>;
228 clocks = <&clks 80>, <&clks 80>;
229 clock-names = "ipg", "per";
233 uart4: serial@50008000 {
234 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
235 reg = <0x50008000 0x4000>;
237 clocks = <&clks 123>, <&clks 57>;
238 clock-names = "ipg", "per";
242 uart3: serial@5000c000 {
243 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
244 reg = <0x5000c000 0x4000>;
246 clocks = <&clks 122>, <&clks 57>;
247 clock-names = "ipg", "per";
251 spi2: cspi@50010000 {
252 #address-cells = <1>;
254 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
255 reg = <0x50010000 0x4000>;
256 clocks = <&clks 79>, <&clks 79>;
257 clock-names = "ipg", "per";
263 #sound-dai-cells = <0>;
264 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
265 reg = <0x50014000 0x4000>;
267 clocks = <&clks 118>;
269 dmas = <&sdma 24 1 0>,
271 dma-names = "rx", "tx";
276 reg = <0x50018000 0x4000>;
280 uart5: serial@5002c000 {
281 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
282 reg = <0x5002c000 0x4000>;
284 clocks = <&clks 124>, <&clks 57>;
285 clock-names = "ipg", "per";
289 tscadc: tscadc@50030000 {
290 compatible = "fsl,imx25-tsadc";
291 reg = <0x50030000 0xc>;
293 clocks = <&clks 119>;
295 interrupt-controller;
296 #interrupt-cells = <1>;
297 #address-cells = <1>;
302 compatible = "fsl,imx25-gcq";
303 reg = <0x50030800 0x60>;
304 interrupt-parent = <&tscadc>;
306 #address-cells = <1>;
312 compatible = "fsl,imx25-tcq";
313 reg = <0x50030400 0x60>;
314 interrupt-parent = <&tscadc>;
322 #sound-dai-cells = <0>;
323 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
324 reg = <0x50034000 0x4000>;
326 clocks = <&clks 117>;
328 dmas = <&sdma 28 1 0>,
330 dma-names = "rx", "tx";
334 fec: ethernet@50038000 {
335 compatible = "fsl,imx25-fec";
336 reg = <0x50038000 0x4000>;
338 clocks = <&clks 88>, <&clks 65>;
339 clock-names = "ipg", "ahb";
344 aips@53f00000 { /* AIPS2 */
345 compatible = "fsl,aips-bus", "simple-bus";
346 #address-cells = <1>;
348 reg = <0x53f00000 0x100000>;
351 aips2: bridge@53f00000 {
352 compatible = "fsl,imx25-aips";
353 reg = <0x53f00000 0x4000>;
357 compatible = "fsl,imx25-ccm";
358 reg = <0x53f80000 0x4000>;
363 gpt4: timer@53f84000 {
364 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
365 reg = <0x53f84000 0x4000>;
366 clocks = <&clks 95>, <&clks 47>;
367 clock-names = "ipg", "per";
371 gpt3: timer@53f88000 {
372 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
373 reg = <0x53f88000 0x4000>;
374 clocks = <&clks 94>, <&clks 47>;
375 clock-names = "ipg", "per";
379 gpt2: timer@53f8c000 {
380 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
381 reg = <0x53f8c000 0x4000>;
382 clocks = <&clks 93>, <&clks 47>;
383 clock-names = "ipg", "per";
387 gpt1: timer@53f90000 {
388 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
389 reg = <0x53f90000 0x4000>;
390 clocks = <&clks 92>, <&clks 47>;
391 clock-names = "ipg", "per";
395 epit1: timer@53f94000 {
396 compatible = "fsl,imx25-epit";
397 reg = <0x53f94000 0x4000>;
401 epit2: timer@53f98000 {
402 compatible = "fsl,imx25-epit";
403 reg = <0x53f98000 0x4000>;
407 gpio4: gpio@53f9c000 {
408 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
409 reg = <0x53f9c000 0x4000>;
413 interrupt-controller;
414 #interrupt-cells = <2>;
418 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
420 reg = <0x53fa0000 0x4000>;
421 clocks = <&clks 106>, <&clks 52>;
422 clock-names = "ipg", "per";
426 gpio3: gpio@53fa4000 {
427 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
428 reg = <0x53fa4000 0x4000>;
432 interrupt-controller;
433 #interrupt-cells = <2>;
437 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
439 reg = <0x53fa8000 0x4000>;
440 clocks = <&clks 107>, <&clks 52>;
441 clock-names = "ipg", "per";
445 scc: crypto@53fac000 {
446 compatible = "fsl,imx25-scc";
447 reg = <0x53fac000 0x4000>;
448 clocks = <&clks 111>;
450 interrupts = <49>, <50>;
451 interrupt-names = "scm", "smn";
454 esdhc1: esdhc@53fb4000 {
455 compatible = "fsl,imx25-esdhc";
456 reg = <0x53fb4000 0x4000>;
458 clocks = <&clks 86>, <&clks 63>, <&clks 45>;
459 clock-names = "ipg", "ahb", "per";
463 esdhc2: esdhc@53fb8000 {
464 compatible = "fsl,imx25-esdhc";
465 reg = <0x53fb8000 0x4000>;
467 clocks = <&clks 87>, <&clks 64>, <&clks 46>;
468 clock-names = "ipg", "ahb", "per";
472 lcdc: lcdc@53fbc000 {
473 compatible = "fsl,imx25-fb", "fsl,imx21-fb";
474 reg = <0x53fbc000 0x4000>;
476 clocks = <&clks 103>, <&clks 66>, <&clks 49>;
477 clock-names = "ipg", "ahb", "per";
482 reg = <0x53fc0000 0x4000>;
488 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
490 reg = <0x53fc8000 0x4000>;
491 clocks = <&clks 108>, <&clks 52>;
492 clock-names = "ipg", "per";
496 gpio1: gpio@53fcc000 {
497 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
498 reg = <0x53fcc000 0x4000>;
502 interrupt-controller;
503 #interrupt-cells = <2>;
506 gpio2: gpio@53fd0000 {
507 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
508 reg = <0x53fd0000 0x4000>;
512 interrupt-controller;
513 #interrupt-cells = <2>;
516 sdma: sdma@53fd4000 {
517 compatible = "fsl,imx25-sdma";
518 reg = <0x53fd4000 0x4000>;
519 clocks = <&clks 112>, <&clks 68>;
520 clock-names = "ipg", "ahb";
523 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
527 compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
528 reg = <0x53fdc000 0x4000>;
529 clocks = <&clks 126>;
535 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
537 reg = <0x53fe0000 0x4000>;
538 clocks = <&clks 105>, <&clks 52>;
539 clock-names = "ipg", "per";
544 compatible = "fsl,imx25-iim", "fsl,imx27-iim";
545 reg = <0x53ff0000 0x4000>;
550 usbotg: usb@53ff4000 {
551 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
552 reg = <0x53ff4000 0x0200>;
554 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
555 clock-names = "ipg", "ahb", "per";
556 fsl,usbmisc = <&usbmisc 0>;
557 fsl,usbphy = <&usbphy0>;
563 usbhost1: usb@53ff4400 {
564 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
565 reg = <0x53ff4400 0x0200>;
567 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
568 clock-names = "ipg", "ahb", "per";
569 fsl,usbmisc = <&usbmisc 1>;
570 fsl,usbphy = <&usbphy1>;
574 usbmisc: usbmisc@53ff4600 {
576 compatible = "fsl,imx25-usbmisc";
577 reg = <0x53ff4600 0x00f>;
581 compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
582 reg = <0x53ffc000 0x4000>;
585 interrupts = <25 56>;
589 iram: sram@78000000 {
590 compatible = "mmio-sram";
591 reg = <0x78000000 0x20000>;
595 compatible = "fsl,emi-bus", "simple-bus";
596 #address-cells = <1>;
598 reg = <0x80000000 0x3b002000>;
602 #address-cells = <1>;
605 compatible = "fsl,imx25-nand";
606 reg = <0xbb000000 0x2000>;
616 compatible = "simple-bus";
617 #address-cells = <1>;
622 compatible = "usb-nop-xceiv";
627 compatible = "usb-nop-xceiv";