arch/arm/boot/dts/imx27-apf27dev.dts

   1 /*
   2  * Copyright 2013 Armadeus Systems - <support@armadeus.com>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /* APF27Dev is a docking board for the APF27 SOM */
  13 #include "imx27-apf27.dts"
  14
  15 / {
  16         model = "Armadeus Systems APF27Dev docking/development board";
  17         compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27";
  18
  19         display: display {
  20                 model = "Chimei-LW700AT9003";
  21                 native-mode = <&timing0>;
  22                 bits-per-pixel = <16>;  /* non-standard but required */
  23                 fsl,pcr = <0xfae80083>; /* non-standard but required */
  24                 display-timings {
  25                         timing0: 800x480 {
  26                                 clock-frequency = <33000033>;
  27                                 hactive = <800>;
  28                                 vactive = <480>;
  29                                 hback-porch = <96>;
  30                                 hfront-porch = <96>;
  31                                 vback-porch = <20>;
  32                                 vfront-porch = <21>;
  33                                 hsync-len = <64>;
  34                                 vsync-len = <4>;
  35                         };
  36                 };
  37         };
  38
  39         gpio-keys {
  40                 compatible = "gpio-keys";
  41                 pinctrl-names = "default";
  42                 pinctrl-0 = <&pinctrl_gpio_keys>;
  43
  44                 user-key {
  45                         label = "user";
  46                         gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
  47                         linux,code = <276>; /* BTN_EXTRA */
  48                 };
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53                 pinctrl-names = "default";
  54                 pinctrl-0 = <&pinctrl_gpio_leds>;
  55
  56                 user {
  57                         label = "Heartbeat";
  58                         gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
  59                         linux,default-trigger = "heartbeat";
  60                 };
  61         };
  62
  63         regulators {
  64                 compatible = "simple-bus";
  65                 #address-cells = <1>;
  66                 #size-cells = <0>;
  67
  68                 reg_max5821: regulator@0 {
  69                         compatible = "regulator-fixed";
  70                         reg = <0>;
  71                         regulator-name = "max5821-reg";
  72                         regulator-min-microvolt = <2500000>;
  73                         regulator-max-microvolt = <2500000>;
  74                         regulator-always-on;
  75                 };
  76         };
  77 };
  78
  79 &cspi1 {
  80         cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
  81         pinctrl-names = "default";
  82         pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
  83         status = "okay";
  84
  85         adc@0 {
  86                 compatible = "maxim,max1027";
  87                 reg = <0>;
  88                 interrupt-parent = <&gpio5>;
  89                 interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
  90                 pinctrl-names = "default";
  91                 pinctrl-0 = <&pinctrl_max1027>;
  92                 spi-max-frequency = <10000000>;
  93         };
  94 };
  95
  96 &cspi2 {
  97         cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
  98                    <&gpio4 27 GPIO_ACTIVE_LOW>,
  99                    <&gpio2 17 GPIO_ACTIVE_LOW>;
 100         pinctrl-names = "default";
 101         pinctrl-0 = <&pinctrl_cspi2 &pinctrl_cspi2_cs>;
 102         status = "okay";
 103 };
 104
 105 &fb {
 106         display = <&display>;
 107         fsl,dmacr = <0x00020010>;
 108         pinctrl-names = "default";
 109         pinctrl-0 = <&pinctrl_imxfb1>;
 110         status = "okay";
 111 };
 112
 113 &i2c1 {
 114         clock-frequency = <400000>;
 115         pinctrl-names = "default";
 116         pinctrl-0 = <&pinctrl_i2c1>;
 117         status = "okay";
 118
 119         rtc@68 {
 120                 compatible = "dallas,ds1374";
 121                 reg = <0x68>;
 122         };
 123
 124         max5821@38 {
 125                 compatible = "maxim,max5821";
 126                 reg = <0x38>;
 127                 vref-supply = <&reg_max5821>;
 128         };
 129 };
 130
 131 &i2c2 {
 132         pinctrl-names = "default";
 133         pinctrl-0 = <&pinctrl_i2c2>;
 134         status = "okay";
 135 };
 136
 137 &iomuxc {
 138         imx27-apf27dev {
 139                 pinctrl_cspi1: cspi1grp {
 140                         fsl,pins = <
 141                                 MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
 142                                 MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
 143                                 MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
 144                         >;
 145                 };
 146
 147                 pinctrl_cspi1_cs: cspi1csgrp {
 148                         fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
 149                 };
 150
 151                 pinctrl_cspi2: cspi2grp {
 152                         fsl,pins = <
 153                                 MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
 154                                 MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
 155                                 MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
 156                         >;
 157                 };
 158
 159                 pinctrl_cspi2_cs: cspi2csgrp {
 160                         fsl,pins = <
 161                                 MX27_PAD_CSI_D5__GPIO2_17 0x0
 162                                 MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
 163                                 MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
 164                         >;
 165                 };
 166
 167                 pinctrl_gpio_leds: gpioledsgrp {
 168                         fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
 169                 };
 170
 171                 pinctrl_gpio_keys: gpiokeysgrp {
 172                         fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
 173                 };
 174
 175                 pinctrl_imxfb1: imxfbgrp {
 176                         fsl,pins = <
 177                                 MX27_PAD_CLS__CLS 0x0
 178                                 MX27_PAD_CONTRAST__CONTRAST 0x0
 179                                 MX27_PAD_LD0__LD0 0x0
 180                                 MX27_PAD_LD1__LD1 0x0
 181                                 MX27_PAD_LD2__LD2 0x0
 182                                 MX27_PAD_LD3__LD3 0x0
 183                                 MX27_PAD_LD4__LD4 0x0
 184                                 MX27_PAD_LD5__LD5 0x0
 185                                 MX27_PAD_LD6__LD6 0x0
 186                                 MX27_PAD_LD7__LD7 0x0
 187                                 MX27_PAD_LD8__LD8 0x0
 188                                 MX27_PAD_LD9__LD9 0x0
 189                                 MX27_PAD_LD10__LD10 0x0
 190                                 MX27_PAD_LD11__LD11 0x0
 191                                 MX27_PAD_LD12__LD12 0x0
 192                                 MX27_PAD_LD13__LD13 0x0
 193                                 MX27_PAD_LD14__LD14 0x0
 194                                 MX27_PAD_LD15__LD15 0x0
 195                                 MX27_PAD_LD16__LD16 0x0
 196                                 MX27_PAD_LD17__LD17 0x0
 197                                 MX27_PAD_LSCLK__LSCLK 0x0
 198                                 MX27_PAD_OE_ACD__OE_ACD 0x0
 199                                 MX27_PAD_PS__PS 0x0
 200                                 MX27_PAD_REV__REV 0x0
 201                                 MX27_PAD_SPL_SPR__SPL_SPR 0x0
 202                                 MX27_PAD_HSYNC__HSYNC 0x0
 203                                 MX27_PAD_VSYNC__VSYNC 0x0
 204                         >;
 205                 };
 206
 207                 pinctrl_i2c1: i2c1grp {
 208                         fsl,pins = <
 209                                 MX27_PAD_I2C_DATA__I2C_DATA 0x0
 210                                 MX27_PAD_I2C_CLK__I2C_CLK 0x0
 211                         >;
 212                 };
 213
 214                 pinctrl_i2c2: i2c2grp {
 215                         fsl,pins = <
 216                                 MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
 217                                 MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
 218                         >;
 219                 };
 220
 221                 pinctrl_max1027: max1027 {
 222                          fsl,pins = <
 223                                  MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */
 224                                  MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */
 225                         >;
 226                 };
 227
 228                 pinctrl_pwm: pwmgrp {
 229                         fsl,pins = <
 230                                 MX27_PAD_PWMO__PWMO 0x0
 231                         >;
 232                 };
 233
 234                 pinctrl_sdhc2: sdhc2grp {
 235                         fsl,pins = <
 236                                 MX27_PAD_SD2_CLK__SD2_CLK 0x0
 237                                 MX27_PAD_SD2_CMD__SD2_CMD 0x0
 238                                 MX27_PAD_SD2_D0__SD2_D0 0x0
 239                                 MX27_PAD_SD2_D1__SD2_D1 0x0
 240                                 MX27_PAD_SD2_D2__SD2_D2 0x0
 241                                 MX27_PAD_SD2_D3__SD2_D3 0x0
 242                         >;
 243                 };
 244
 245                 pinctrl_sdhc2_cd: sdhc2cdgrp {
 246                         fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
 247                 };
 248         };
 249 };
 250
 251 &sdhci2 {
 252         bus-width = <4>;
 253         cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
 254         pinctrl-names = "default";
 255         pinctrl-0 = <&pinctrl_sdhc2 &pinctrl_sdhc2_cd>;
 256         status = "okay";
 257 };
 258
 259 &pwm {
 260         pinctrl-names = "default";
 261         pinctrl-0 = <&pinctrl_pwm>;
 262 };