arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts

   1 /*
   2  * The code contained herein is licensed under the GNU General Public
   3  * License. You may obtain a copy of the GNU General Public License
   4  * Version 2 or later at the following locations:
   5  *
   6  * http://www.opensource.org/licenses/gpl-license.html
   7  * http://www.gnu.org/copyleft/gpl.html
   8  */
   9
  10 #include "imx27-phytec-phycore-som.dtsi"
  11
  12 / {
  13         model = "Phytec pcm970";
  14         compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
  15
  16         chosen {
  17                 stdout-path = &uart1;
  18         };
  19
  20         display0: LQ035Q7 {
  21                 model = "Sharp-LQ035Q7";
  22                 native-mode = <&timing0>;
  23                 bits-per-pixel = <16>;
  24                 fsl,pcr = <0xf00080c0>;
  25
  26                 display-timings {
  27                         timing0: 240x320 {
  28                                 clock-frequency = <5500000>;
  29                                 hactive = <240>;
  30                                 vactive = <320>;
  31                                 hback-porch = <5>;
  32                                 hsync-len = <7>;
  33                                 hfront-porch = <16>;
  34                                 vback-porch = <7>;
  35                                 vsync-len = <1>;
  36                                 vfront-porch = <9>;
  37                                 pixelclk-active = <1>;
  38                                 hsync-active = <1>;
  39                                 vsync-active = <1>;
  40                                 de-active = <0>;
  41                         };
  42                 };
  43         };
  44
  45         regulators {
  46                 regulator@2 {
  47                         compatible = "regulator-fixed";
  48                         pinctrl-names = "default";
  49                         pinctrl-0 = <&pinctrl_csien>;
  50                         reg = <2>;
  51                         regulator-name = "CSI_EN";
  52                         regulator-min-microvolt = <3300000>;
  53                         regulator-max-microvolt = <3300000>;
  54                         gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
  55                         regulator-always-on;
  56                 };
  57         };
  58
  59         usbphy {
  60                 usbphy2: usbphy@2 {
  61                         compatible = "usb-nop-xceiv";
  62                         reg = <2>;
  63                         vcc-supply = <&reg_5v0>;
  64                         clocks = <&clks IMX27_CLK_DUMMY>;
  65                         clock-names = "main_clk";
  66                 };
  67         };
  68 };
  69
  70 &cspi1 {
  71         pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
  72         cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
  73                    <&gpio4 27 GPIO_ACTIVE_LOW>;
  74 };
  75
  76 &fb {
  77         pinctrl-names = "default";
  78         pinctrl-0 = <&pinctrl_imxfb1>;
  79         display = <&display0>;
  80         lcd-supply = <&reg_5v0>;
  81         fsl,dmacr = <0x00020010>;
  82         fsl,lscr1 = <0x00120300>;
  83         fsl,lpccr = <0x00a903ff>;
  84         status = "okay";
  85 };
  86
  87 &i2c1 {
  88         clock-frequency = <400000>;
  89         pinctrl-names = "default";
  90         pinctrl-0 = <&pinctrl_i2c1>;
  91         status = "okay";
  92
  93         camgpio: pca9536@41 {
  94                 compatible = "nxp,pca9536";
  95                 reg = <0x41>;
  96                 gpio-controller;
  97                 #gpio-cells = <2>;
  98         };
  99 };
 100
 101 &iomuxc {
 102         imx27_phycore_rdk {
 103                 pinctrl_csien: csiengrp {
 104                         fsl,pins = <
 105                                 MX27_PAD_USB_OC_B__GPIO2_24 0x0
 106                         >;
 107                 };
 108
 109                 pinctrl_cspi1cs1: cspi1cs1grp {
 110                         fsl,pins = <
 111                                 MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
 112                         >;
 113                 };
 114
 115                 pinctrl_imxfb1: imxfbgrp {
 116                         fsl,pins = <
 117                                 MX27_PAD_LD0__LD0 0x0
 118                                 MX27_PAD_LD1__LD1 0x0
 119                                 MX27_PAD_LD2__LD2 0x0
 120                                 MX27_PAD_LD3__LD3 0x0
 121                                 MX27_PAD_LD4__LD4 0x0
 122                                 MX27_PAD_LD5__LD5 0x0
 123                                 MX27_PAD_LD6__LD6 0x0
 124                                 MX27_PAD_LD7__LD7 0x0
 125                                 MX27_PAD_LD8__LD8 0x0
 126                                 MX27_PAD_LD9__LD9 0x0
 127                                 MX27_PAD_LD10__LD10 0x0
 128                                 MX27_PAD_LD11__LD11 0x0
 129                                 MX27_PAD_LD12__LD12 0x0
 130                                 MX27_PAD_LD13__LD13 0x0
 131                                 MX27_PAD_LD14__LD14 0x0
 132                                 MX27_PAD_LD15__LD15 0x0
 133                                 MX27_PAD_LD16__LD16 0x0
 134                                 MX27_PAD_LD17__LD17 0x0
 135                                 MX27_PAD_CLS__CLS 0x0
 136                                 MX27_PAD_CONTRAST__CONTRAST 0x0
 137                                 MX27_PAD_LSCLK__LSCLK 0x0
 138                                 MX27_PAD_OE_ACD__OE_ACD 0x0
 139                                 MX27_PAD_PS__PS 0x0
 140                                 MX27_PAD_REV__REV 0x0
 141                                 MX27_PAD_SPL_SPR__SPL_SPR 0x0
 142                                 MX27_PAD_HSYNC__HSYNC 0x0
 143                                 MX27_PAD_VSYNC__VSYNC 0x0
 144                         >;
 145                 };
 146
 147                 pinctrl_i2c1: i2c1grp {
 148                         /* Add pullup to DATA line */
 149                         fsl,pins = <
 150                                 MX27_PAD_I2C_DATA__I2C_DATA     0x1
 151                                 MX27_PAD_I2C_CLK__I2C_CLK       0x0
 152                         >;
 153                 };
 154
 155                 pinctrl_owire1: owire1grp {
 156                         fsl,pins = <
 157                                 MX27_PAD_RTCK__OWIRE 0x0
 158                         >;
 159                 };
 160
 161                 pinctrl_sdhc2: sdhc2grp {
 162                         fsl,pins = <
 163                                 MX27_PAD_SD2_CLK__SD2_CLK 0x0
 164                                 MX27_PAD_SD2_CMD__SD2_CMD 0x0
 165                                 MX27_PAD_SD2_D0__SD2_D0 0x0
 166                                 MX27_PAD_SD2_D1__SD2_D1 0x0
 167                                 MX27_PAD_SD2_D2__SD2_D2 0x0
 168                                 MX27_PAD_SD2_D3__SD2_D3 0x0
 169                                 MX27_PAD_SSI3_FS__GPIO3_28      0x0 /* WP */
 170                                 MX27_PAD_SSI3_RXDAT__GPIO3_29   0x0 /* CD */
 171                         >;
 172                 };
 173
 174                 pinctrl_uart1: uart1grp {
 175                         fsl,pins = <
 176                                 MX27_PAD_UART1_TXD__UART1_TXD 0x0
 177                                 MX27_PAD_UART1_RXD__UART1_RXD 0x0
 178                                 MX27_PAD_UART1_CTS__UART1_CTS 0x0
 179                                 MX27_PAD_UART1_RTS__UART1_RTS 0x0
 180                         >;
 181                 };
 182
 183                 pinctrl_uart2: uart2grp {
 184                         fsl,pins = <
 185                                 MX27_PAD_UART2_TXD__UART2_TXD 0x0
 186                                 MX27_PAD_UART2_RXD__UART2_RXD 0x0
 187                                 MX27_PAD_UART2_CTS__UART2_CTS 0x0
 188                                 MX27_PAD_UART2_RTS__UART2_RTS 0x0
 189                         >;
 190                 };
 191
 192                 pinctrl_usbh2: usbh2grp {
 193                         fsl,pins = <
 194                                 MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
 195                                 MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
 196                                 MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
 197                                 MX27_PAD_USBH2_STP__USBH2_STP 0x0
 198                                 MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
 199                                 MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
 200                                 MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
 201                                 MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
 202                                 MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
 203                                 MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
 204                                 MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
 205                                 MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
 206                         >;
 207                 };
 208
 209                 pinctrl_weim: weimgrp {
 210                         fsl,pins = <
 211                                 MX27_PAD_CS4_B__CS4_B           0x0 /* CS4 */
 212                                 MX27_PAD_SD1_D1__GPIO5_19       0x0 /* CAN IRQ */
 213                         >;
 214                 };
 215         };
 216 };
 217
 218 &owire {
 219         pinctrl-names = "default";
 220         pinctrl-0 = <&pinctrl_owire1>;
 221         status = "okay";
 222 };
 223
 224 &pmicleds {
 225         ledr1: led@3 {
 226                 reg = <3>;
 227                 label = "system:red1:user";
 228         };
 229
 230         ledg1: led@4 {
 231                 reg = <4>;
 232                 label = "system:green1:user";
 233         };
 234
 235         ledb1: led@5 {
 236                 reg = <5>;
 237                 label = "system:blue1:user";
 238         };
 239
 240         ledr2: led@6 {
 241                 reg = <6>;
 242                 label = "system:red2:user";
 243         };
 244
 245         ledg2: led@7 {
 246                 reg = <7>;
 247                 label = "system:green2:user";
 248         };
 249
 250         ledb2: led@8 {
 251                 reg = <8>;
 252                 label = "system:blue2:user";
 253         };
 254
 255         ledr3: led@9 {
 256                 reg = <9>;
 257                 label = "system:red3:nand";
 258                 linux,default-trigger = "nand-disk";
 259         };
 260
 261         ledg3: led@10 {
 262                 reg = <10>;
 263                 label = "system:green3:live";
 264                 linux,default-trigger = "heartbeat";
 265         };
 266
 267         ledb3: led@11 {
 268                 reg = <11>;
 269                 label = "system:blue3:cpu";
 270                 linux,default-trigger = "cpu0";
 271         };
 272 };
 273
 274 &sdhci2 {
 275         pinctrl-names = "default";
 276         pinctrl-0 = <&pinctrl_sdhc2>;
 277         bus-width = <4>;
 278         cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
 279         wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
 280         vmmc-supply = <&vmmc1_reg>;
 281         status = "okay";
 282 };
 283
 284 &uart1 {
 285         uart-has-rtscts;
 286         pinctrl-names = "default";
 287         pinctrl-0 = <&pinctrl_uart1>;
 288         status = "okay";
 289 };
 290
 291 &uart2 {
 292         uart-has-rtscts;
 293         pinctrl-names = "default";
 294         pinctrl-0 = <&pinctrl_uart2>;
 295         status = "okay";
 296 };
 297
 298 &usbh2 {
 299         pinctrl-names = "default";
 300         pinctrl-0 = <&pinctrl_usbh2>;
 301         dr_mode = "host";
 302         phy_type = "ulpi";
 303         vbus-supply = <&reg_5v0>;
 304         fsl,usbphy = <&usbphy2>;
 305         disable-over-current;
 306         status = "okay";
 307 };
 308
 309 &weim {
 310         pinctrl-names = "default";
 311         pinctrl-0 = <&pinctrl_weim>;
 312
 313         can@4,0 {
 314                 compatible = "nxp,sja1000";
 315                 reg = <4 0x00000000 0x00000100>;
 316                 interrupt-parent = <&gpio5>;
 317                 interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
 318                 nxp,external-clock-frequency = <16000000>;
 319                 nxp,tx-output-config = <0x16>;
 320                 nxp,no-comparator-bypass;
 321                 fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>;
 322         };
 323 };