arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi

   1 /*
   2  * Copyright 2012 Sascha Hauer, Pengutronix
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /dts-v1/;
  13 #include "imx27.dtsi"
  14
  15 / {
  16         model = "Phytec pcm038";
  17         compatible = "phytec,imx27-pcm038", "fsl,imx27";
  18
  19         memory@a0000000 {
  20                 device_type = "memory";
  21                 reg = <0xa0000000 0x08000000>;
  22         };
  23
  24         regulators {
  25                 compatible = "simple-bus";
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28
  29                 reg_3v3: regulator@0 {
  30                         compatible = "regulator-fixed";
  31                         reg = <0>;
  32                         regulator-name = "3V3";
  33                         regulator-min-microvolt = <3300000>;
  34                         regulator-max-microvolt = <3300000>;
  35                 };
  36
  37                 reg_5v0: regulator@1 {
  38                         compatible = "regulator-fixed";
  39                         reg = <1>;
  40                         regulator-name = "5V0";
  41                         regulator-min-microvolt = <5000000>;
  42                         regulator-max-microvolt = <5000000>;
  43                 };
  44         };
  45
  46         usbphy {
  47                 compatible = "simple-bus";
  48                 #address-cells = <1>;
  49                 #size-cells = <0>;
  50
  51                 usbphy0: usbphy@0 {
  52                         compatible = "usb-nop-xceiv";
  53                         reg = <0>;
  54                         vcc-supply = <&sw3_reg>;
  55                         clocks = <&clks IMX27_CLK_DUMMY>;
  56                         clock-names = "main_clk";
  57                         #phy-cells = <0>;
  58                 };
  59         };
  60 };
  61
  62 &audmux {
  63         status = "okay";
  64
  65         /* SSI0 <=> PINS_4 (MC13783 Audio) */
  66         ssi0 {
  67                 fsl,audmux-port = <0>;
  68                 fsl,port-config = <0xcb205000>;
  69         };
  70
  71         pins4 {
  72                 fsl,audmux-port = <2>;
  73                 fsl,port-config = <0x00001000>;
  74         };
  75 };
  76
  77 &cspi1 {
  78         pinctrl-names = "default";
  79         pinctrl-0 = <&pinctrl_cspi1>;
  80         cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
  81         status = "okay";
  82
  83         pmic: mc13783@0 {
  84                 compatible = "fsl,mc13783";
  85                 pinctrl-names = "default";
  86                 pinctrl-0 = <&pinctrl_pmic>;
  87                 reg = <0>;
  88                 spi-cs-high;
  89                 spi-max-frequency = <20000000>;
  90                 interrupt-parent = <&gpio2>;
  91                 interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
  92                 fsl,mc13xxx-uses-adc;
  93                 fsl,mc13xxx-uses-rtc;
  94
  95                 pmicleds: leds {
  96                         #address-cells = <1>;
  97                         #size-cells = <0>;
  98                         led-control = <0x001 0x000 0x000 0x000 0x000 0x000>;
  99                 };
 100
 101                 regulators {
 102                         /* SW1A and SW1B joined operation */
 103                         sw1_reg: sw1a {
 104                                 regulator-min-microvolt = <1200000>;
 105                                 regulator-max-microvolt = <1520000>;
 106                                 regulator-always-on;
 107                                 regulator-boot-on;
 108                         };
 109
 110                         /* SW2A and SW2B joined operation */
 111                         sw2_reg: sw2a {
 112                                 regulator-min-microvolt = <1800000>;
 113                                 regulator-max-microvolt = <1800000>;
 114                                 regulator-always-on;
 115                                 regulator-boot-on;
 116                         };
 117
 118                         sw3_reg: sw3 {
 119                                 regulator-min-microvolt = <5000000>;
 120                                 regulator-max-microvolt = <5000000>;
 121                                 regulator-always-on;
 122                                 regulator-boot-on;
 123                         };
 124
 125                         vaudio_reg: vaudio {
 126                                 regulator-always-on;
 127                                 regulator-boot-on;
 128                         };
 129
 130                         violo_reg: violo {
 131                                 regulator-min-microvolt = <1800000>;
 132                                 regulator-max-microvolt = <1800000>;
 133                                 regulator-always-on;
 134                                 regulator-boot-on;
 135                         };
 136
 137                         viohi_reg: viohi {
 138                                 regulator-always-on;
 139                                 regulator-boot-on;
 140                         };
 141
 142                         vgen_reg: vgen {
 143                                 regulator-min-microvolt = <1500000>;
 144                                 regulator-max-microvolt = <1500000>;
 145                                 regulator-always-on;
 146                                 regulator-boot-on;
 147                         };
 148
 149                         vcam_reg: vcam {
 150                                 regulator-min-microvolt = <2800000>;
 151                                 regulator-max-microvolt = <2800000>;
 152                         };
 153
 154                         vrf1_reg: vrf1 {
 155                                 regulator-min-microvolt = <2775000>;
 156                                 regulator-max-microvolt = <2775000>;
 157                                 regulator-always-on;
 158                                 regulator-boot-on;
 159                         };
 160
 161                         vrf2_reg: vrf2 {
 162                                 regulator-min-microvolt = <2775000>;
 163                                 regulator-max-microvolt = <2775000>;
 164                                 regulator-always-on;
 165                                 regulator-boot-on;
 166                         };
 167
 168                         vmmc1_reg: vmmc1 {
 169                                 regulator-min-microvolt = <1600000>;
 170                                 regulator-max-microvolt = <3000000>;
 171                         };
 172
 173                         gpo1_reg: gpo1 { };
 174
 175                         pwgt1spi_reg: pwgt1spi {
 176                                 regulator-always-on;
 177                         };
 178                 };
 179         };
 180 };
 181
 182 &fec {
 183         phy-mode = "mii";
 184         phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
 185         phy-supply = <&reg_3v3>;
 186         pinctrl-names = "default";
 187         pinctrl-0 = <&pinctrl_fec1>;
 188         status = "okay";
 189 };
 190
 191 &i2c2 {
 192         clock-frequency = <400000>;
 193         pinctrl-names = "default";
 194         pinctrl-0 = <&pinctrl_i2c2>;
 195         status = "okay";
 196
 197         at24@52 {
 198                 compatible = "atmel,24c32";
 199                 pagesize = <32>;
 200                 reg = <0x52>;
 201         };
 202
 203         pcf8563@51 {
 204                 compatible = "nxp,pcf8563";
 205                 reg = <0x51>;
 206         };
 207
 208         lm75@4a {
 209                 compatible = "national,lm75";
 210                 reg = <0x4a>;
 211         };
 212 };
 213
 214 &iomuxc {
 215         imx27_phycore_som {
 216                 pinctrl_cspi1: cspi1grp {
 217                         fsl,pins = <
 218                                 MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
 219                                 MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
 220                                 MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
 221                                 MX27_PAD_CSPI1_SS0__GPIO4_28    0x0 /* SPI1 CS0 */
 222                         >;
 223                 };
 224
 225                 pinctrl_fec1: fec1grp {
 226                         fsl,pins = <
 227                                 MX27_PAD_SD3_CMD__FEC_TXD0 0x0
 228                                 MX27_PAD_SD3_CLK__FEC_TXD1 0x0
 229                                 MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
 230                                 MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
 231                                 MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
 232                                 MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
 233                                 MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
 234                                 MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
 235                                 MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
 236                                 MX27_PAD_ATA_DATA7__FEC_MDC 0x0
 237                                 MX27_PAD_ATA_DATA8__FEC_CRS 0x0
 238                                 MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
 239                                 MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
 240                                 MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
 241                                 MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
 242                                 MX27_PAD_ATA_DATA13__FEC_COL 0x0
 243                                 MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
 244                                 MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
 245                                 MX27_PAD_SSI3_TXDAT__GPIO3_30   0x0 /* FEC RST */
 246                         >;
 247                 };
 248
 249                 pinctrl_i2c2: i2c2grp {
 250                         fsl,pins = <
 251                                 MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
 252                                 MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
 253                         >;
 254                 };
 255
 256                 pinctrl_nfc: nfcgrp {
 257                         fsl,pins = <
 258                                 MX27_PAD_NFRB__NFRB 0x0
 259                                 MX27_PAD_NFCLE__NFCLE 0x0
 260                                 MX27_PAD_NFWP_B__NFWP_B 0x0
 261                                 MX27_PAD_NFCE_B__NFCE_B 0x0
 262                                 MX27_PAD_NFALE__NFALE 0x0
 263                                 MX27_PAD_NFRE_B__NFRE_B 0x0
 264                                 MX27_PAD_NFWE_B__NFWE_B 0x0
 265                         >;
 266                 };
 267
 268                 pinctrl_pmic: pmicgrp {
 269                         fsl,pins = <
 270                                 MX27_PAD_USB_PWR__GPIO2_23      0x0 /* PMIC IRQ */
 271                         >;
 272                 };
 273
 274                 pinctrl_ssi1: ssi1grp {
 275                         fsl,pins = <
 276                                 MX27_PAD_SSI1_FS__SSI1_FS 0x0
 277                                 MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
 278                                 MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
 279                                 MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
 280                         >;
 281                 };
 282
 283                 pinctrl_usbotg: usbotggrp {
 284                         fsl,pins = <
 285                                 MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
 286                                 MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
 287                                 MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
 288                                 MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
 289                                 MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
 290                                 MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
 291                                 MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
 292                                 MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
 293                                 MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
 294                                 MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
 295                                 MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
 296                                 MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
 297                         >;
 298                 };
 299         };
 300 };
 301
 302 &nfc {
 303         pinctrl-names = "default";
 304         pinctrl-0 = <&pinctrl_nfc>;
 305         nand-bus-width = <8>;
 306         nand-ecc-mode = "hw";
 307         nand-on-flash-bbt;
 308         status = "okay";
 309 };
 310
 311 &ssi1 {
 312         pinctrl-names = "default";
 313         pinctrl-0 = <&pinctrl_ssi1>;
 314         status = "okay";
 315 };
 316
 317 &usbotg {
 318         pinctrl-names = "default";
 319         pinctrl-0 = <&pinctrl_usbotg>;
 320         dr_mode = "otg";
 321         phy_type = "ulpi";
 322         fsl,usbphy = <&usbphy0>;
 323         vbus-supply = <&sw3_reg>;
 324         disable-over-current;
 325         status = "okay";
 326 };
 327
 328 &weim {
 329         status = "okay";
 330
 331         nor: nor@0,0 {
 332                 compatible = "cfi-flash";
 333                 reg = <0 0x00000000 0x02000000>;
 334                 bank-width = <2>;
 335                 linux,mtd-name = "physmap-flash.0";
 336                 fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
 337                 #address-cells = <1>;
 338                 #size-cells = <1>;
 339         };
 340
 341         sram: sram@1,0 {
 342                 compatible = "mtd-ram";
 343                 reg = <1 0x00000000 0x00800000>;
 344                 bank-width = <2>;
 345                 linux,mtd-name = "mtd-ram.0";
 346                 fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
 347                 #address-cells = <1>;
 348                 #size-cells = <1>;
 349         };
 350 };