arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
   4  */
   5
   6 /dts-v1/;
   7 #include "imx51-eukrea-cpuimx51.dtsi"
   8 #include <dt-bindings/gpio/gpio.h>
   9
  10 / {
  11         model = "Eukrea CPUIMX51";
  12         compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
  13
  14         clocks {
  15                 clk24M: can_clock {
  16                         compatible = "fixed-clock";
  17                         #clock-cells = <0>;
  18                         clock-frequency = <24000000>;
  19                 };
  20         };
  21
  22         gpio_keys {
  23                 compatible = "gpio-keys";
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&pinctrl_gpiokeys_1>;
  26
  27                 button-1 {
  28                         label = "BP1";
  29                         gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
  30                         linux,code = <256>;
  31                         wakeup-source;
  32                         linux,input-type = <1>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38                 pinctrl-names = "default";
  39                 pinctrl-0 = <&pinctrl_gpioled>;
  40
  41                 led1 {
  42                         label = "led1";
  43                         gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
  44                         linux,default-trigger = "heartbeat";
  45                 };
  46         };
  47
  48         regulators {
  49                 compatible = "simple-bus";
  50                 #address-cells = <1>;
  51                 #size-cells = <0>;
  52
  53                 reg_can: regulator@0 {
  54                         compatible = "regulator-fixed";
  55                         reg = <0>;
  56                         regulator-name = "CAN_RST";
  57                         regulator-min-microvolt = <3300000>;
  58                         regulator-max-microvolt = <3300000>;
  59                         gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
  60                         startup-delay-us = <20000>;
  61                         enable-active-high;
  62                 };
  63         };
  64
  65         sound {
  66                 compatible = "eukrea,asoc-tlv320";
  67                 eukrea,model = "imx51-eukrea-tlv320aic23";
  68                 ssi-controller = <&ssi2>;
  69                 fsl,mux-int-port = <2>;
  70                 fsl,mux-ext-port = <3>;
  71         };
  72
  73         usbphy1: usbphy1 {
  74                 compatible = "usb-nop-xceiv";
  75                 clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
  76                 clock-names = "main_clk";
  77                 clock-frequency = <19200000>;
  78                 #phy-cells = <0>;
  79         };
  80 };
  81
  82 &audmux {
  83         pinctrl-names = "default";
  84         pinctrl-0 = <&pinctrl_audmux>;
  85         status = "okay";
  86 };
  87
  88 &esdhc1 {
  89         pinctrl-names = "default";
  90         pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
  91         cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
  92         status = "okay";
  93 };
  94
  95 &ecspi1 {
  96         pinctrl-names = "default";
  97         pinctrl-0 = <&pinctrl_ecspi1>;
  98         cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
  99         status = "okay";
 100
 101         can0: can@0 {
 102                 pinctrl-names = "default";
 103                 pinctrl-0 = <&pinctrl_can>;
 104                 compatible = "microchip,mcp2515";
 105                 reg = <0>;
 106                 clocks = <&clk24M>;
 107                 spi-max-frequency = <10000000>;
 108                 interrupt-parent = <&gpio1>;
 109                 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 110                 vdd-supply = <&reg_can>;
 111         };
 112 };
 113
 114 &i2c1 {
 115         tlv320aic23: codec@1a {
 116                 compatible = "ti,tlv320aic23";
 117                 reg = <0x1a>;
 118         };
 119 };
 120
 121 &iomuxc {
 122         imx51-eukrea {
 123                 pinctrl_audmux: audmuxgrp {
 124                         fsl,pins = <
 125                                 MX51_PAD_AUD3_BB_TXD__AUD3_TXD          0x80000000
 126                                 MX51_PAD_AUD3_BB_RXD__AUD3_RXD          0x80000000
 127                                 MX51_PAD_AUD3_BB_CK__AUD3_TXC           0x80000000
 128                                 MX51_PAD_AUD3_BB_FS__AUD3_TXFS          0x80000000
 129                         >;
 130                 };
 131
 132
 133                 pinctrl_can: cangrp {
 134                         fsl,pins = <
 135                                 MX51_PAD_CSI2_PIXCLK__GPIO4_15          0x80000000      /* nReset */
 136                                 MX51_PAD_GPIO1_1__GPIO1_1               0x80000000      /* IRQ */
 137                         >;
 138                 };
 139
 140                 pinctrl_ecspi1: ecspi1grp {
 141                         fsl,pins = <
 142                                 MX51_PAD_CSPI1_MISO__ECSPI1_MISO        0x185
 143                                 MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI        0x185
 144                                 MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK        0x185
 145                                 MX51_PAD_CSPI1_SS0__GPIO4_24            0x80000000      /* CS0 */
 146                         >;
 147                 };
 148
 149                 pinctrl_esdhc1: esdhc1grp {
 150                         fsl,pins = <
 151                                 MX51_PAD_SD1_CMD__SD1_CMD               0x400020d5
 152                                 MX51_PAD_SD1_CLK__SD1_CLK               0x20d5
 153                                 MX51_PAD_SD1_DATA0__SD1_DATA0           0x20d5
 154                                 MX51_PAD_SD1_DATA1__SD1_DATA1           0x20d5
 155                                 MX51_PAD_SD1_DATA2__SD1_DATA2           0x20d5
 156                                 MX51_PAD_SD1_DATA3__SD1_DATA3           0x20d5
 157                         >;
 158                 };
 159
 160                 pinctrl_uart1: uart1grp {
 161                         fsl,pins = <
 162                                 MX51_PAD_UART1_RXD__UART1_RXD           0x1c5
 163                                 MX51_PAD_UART1_TXD__UART1_TXD           0x1c5
 164                         >;
 165                 };
 166
 167                 pinctrl_uart3: uart3grp {
 168                         fsl,pins = <
 169                                 MX51_PAD_UART3_RXD__UART3_RXD           0x1c5
 170                                 MX51_PAD_UART3_TXD__UART3_TXD           0x1c5
 171                         >;
 172                 };
 173
 174                 pinctrl_uart3_rtscts: uart3rtsctsgrp {
 175                         fsl,pins = <
 176                                 MX51_PAD_KEY_COL4__UART3_RTS            0x1c5
 177                                 MX51_PAD_KEY_COL5__UART3_CTS            0x1c5
 178                         >;
 179                 };
 180
 181                 pinctrl_backlight_1: backlightgrp-1 {
 182                         fsl,pins = <
 183                                 MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
 184                         >;
 185                 };
 186
 187                 pinctrl_esdhc1_cd: esdhc1_cd {
 188                         fsl,pins = <
 189                                 MX51_PAD_GPIO1_0__GPIO1_0 0xd5
 190                         >;
 191                 };
 192
 193                 pinctrl_gpiokeys_1: gpiokeysgrp-1 {
 194                         fsl,pins = <
 195                                 MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
 196                         >;
 197                 };
 198
 199                 pinctrl_gpioled: gpioledgrp-1 {
 200                         fsl,pins = <
 201                                 MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
 202                         >;
 203                 };
 204
 205                 pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
 206                         fsl,pins = <
 207                                 MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
 208                         >;
 209                 };
 210
 211                 pinctrl_usbh1: usbh1grp {
 212                         fsl,pins = <
 213                                 MX51_PAD_USBH1_CLK__USBH1_CLK     0x1e5
 214                                 MX51_PAD_USBH1_DIR__USBH1_DIR     0x1e5
 215                                 MX51_PAD_USBH1_NXT__USBH1_NXT     0x1e5
 216                                 MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
 217                                 MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
 218                                 MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
 219                                 MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
 220                                 MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
 221                                 MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
 222                                 MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
 223                                 MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
 224                                 MX51_PAD_USBH1_STP__USBH1_STP     0x1e5
 225                         >;
 226                 };
 227
 228                 pinctrl_usbh1_vbus: usbh1-vbusgrp {
 229                         fsl,pins = <
 230                                 MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
 231                         >;
 232                 };
 233         };
 234 };
 235
 236 &ssi2 {
 237         codec-handle = <&tlv320aic23>;
 238         status = "okay";
 239 };
 240
 241 &uart1 {
 242         pinctrl-names = "default";
 243         pinctrl-0 = <&pinctrl_uart1>;
 244         uart-has-rtscts;
 245         status = "okay";
 246 };
 247
 248 &uart3 {
 249         pinctrl-names = "default";
 250         pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
 251         uart-has-rtscts;
 252         status = "okay";
 253 };
 254
 255 &usbh1 {
 256         pinctrl-names = "default";
 257         pinctrl-0 = <&pinctrl_usbh1>;
 258         fsl,usbphy = <&usbphy1>;
 259         dr_mode = "host";
 260         phy_type = "ulpi";
 261         status = "okay";
 262 };
 263
 264 &usbotg {
 265         dr_mode = "otg";
 266         phy_type = "utmi_wide";
 267         status = "okay";
 268 };
 269
 270 &usbphy0 {
 271         pinctrl-names = "default";
 272         pinctrl-0 = <&pinctrl_usbh1_vbus>;
 273         reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
 274 };