arch/arm/boot/dts/imx51.dtsi

   1 /*
   2  * Copyright 2011 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 #include "skeleton.dtsi"
  14 #include "imx51-pinfunc.h"
  15 #include <dt-bindings/clock/imx5-clock.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/input/input.h>
  18 #include <dt-bindings/interrupt-controller/irq.h>
  19
  20 / {
  21         aliases {
  22                 ethernet0 = &fec;
  23                 gpio0 = &gpio1;
  24                 gpio1 = &gpio2;
  25                 gpio2 = &gpio3;
  26                 gpio3 = &gpio4;
  27                 i2c0 = &i2c1;
  28                 i2c1 = &i2c2;
  29                 mmc0 = &esdhc1;
  30                 mmc1 = &esdhc2;
  31                 mmc2 = &esdhc3;
  32                 mmc3 = &esdhc4;
  33                 serial0 = &uart1;
  34                 serial1 = &uart2;
  35                 serial2 = &uart3;
  36                 spi0 = &ecspi1;
  37                 spi1 = &ecspi2;
  38                 spi2 = &cspi;
  39         };
  40
  41         tzic: tz-interrupt-controller@e0000000 {
  42                 compatible = "fsl,imx51-tzic", "fsl,tzic";
  43                 interrupt-controller;
  44                 #interrupt-cells = <1>;
  45                 reg = <0xe0000000 0x4000>;
  46         };
  47
  48         clocks {
  49                 #address-cells = <1>;
  50                 #size-cells = <0>;
  51
  52                 ckil {
  53                         compatible = "fsl,imx-ckil", "fixed-clock";
  54                         #clock-cells = <0>;
  55                         clock-frequency = <32768>;
  56                 };
  57
  58                 ckih1 {
  59                         compatible = "fsl,imx-ckih1", "fixed-clock";
  60                         #clock-cells = <0>;
  61                         clock-frequency = <0>;
  62                 };
  63
  64                 ckih2 {
  65                         compatible = "fsl,imx-ckih2", "fixed-clock";
  66                         #clock-cells = <0>;
  67                         clock-frequency = <0>;
  68                 };
  69
  70                 osc {
  71                         compatible = "fsl,imx-osc", "fixed-clock";
  72                         #clock-cells = <0>;
  73                         clock-frequency = <24000000>;
  74                 };
  75         };
  76
  77         cpus {
  78                 #address-cells = <1>;
  79                 #size-cells = <0>;
  80                 cpu: cpu@0 {
  81                         device_type = "cpu";
  82                         compatible = "arm,cortex-a8";
  83                         reg = <0>;
  84                         clock-latency = <62500>;
  85                         clocks = <&clks IMX5_CLK_CPU_PODF>;
  86                         clock-names = "cpu";
  87                         operating-points = <
  88                                 166000  1000000
  89                                 600000  1050000
  90                                 800000  1100000
  91                         >;
  92                         voltage-tolerance = <5>;
  93                 };
  94         };
  95
  96         usbphy {
  97                 #address-cells = <1>;
  98                 #size-cells = <0>;
  99                 compatible = "simple-bus";
 100
 101                 usbphy0: usbphy@0 {
 102                         compatible = "usb-nop-xceiv";
 103                         reg = <0>;
 104                         clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
 105                         clock-names = "main_clk";
 106                 };
 107         };
 108
 109         display-subsystem {
 110                 compatible = "fsl,imx-display-subsystem";
 111                 ports = <&ipu_di0>, <&ipu_di1>;
 112         };
 113
 114         soc {
 115                 #address-cells = <1>;
 116                 #size-cells = <1>;
 117                 compatible = "simple-bus";
 118                 interrupt-parent = <&tzic>;
 119                 ranges;
 120
 121                 iram: iram@1ffe0000 {
 122                         compatible = "mmio-sram";
 123                         reg = <0x1ffe0000 0x20000>;
 124                 };
 125
 126                 ipu: ipu@40000000 {
 127                         #address-cells = <1>;
 128                         #size-cells = <0>;
 129                         compatible = "fsl,imx51-ipu";
 130                         reg = <0x40000000 0x20000000>;
 131                         interrupts = <11 10>;
 132                         clocks = <&clks IMX5_CLK_IPU_GATE>,
 133                                  <&clks IMX5_CLK_IPU_DI0_GATE>,
 134                                  <&clks IMX5_CLK_IPU_DI1_GATE>;
 135                         clock-names = "bus", "di0", "di1";
 136                         resets = <&src 2>;
 137
 138                         ipu_di0: port@2 {
 139                                 reg = <2>;
 140
 141                                 ipu_di0_disp0: endpoint {
 142                                 };
 143                         };
 144
 145                         ipu_di1: port@3 {
 146                                 reg = <3>;
 147
 148                                 ipu_di1_disp1: endpoint {
 149                                 };
 150                         };
 151                 };
 152
 153                 aips@70000000 { /* AIPS1 */
 154                         compatible = "fsl,aips-bus", "simple-bus";
 155                         #address-cells = <1>;
 156                         #size-cells = <1>;
 157                         reg = <0x70000000 0x10000000>;
 158                         ranges;
 159
 160                         spba@70000000 {
 161                                 compatible = "fsl,spba-bus", "simple-bus";
 162                                 #address-cells = <1>;
 163                                 #size-cells = <1>;
 164                                 reg = <0x70000000 0x40000>;
 165                                 ranges;
 166
 167                                 esdhc1: esdhc@70004000 {
 168                                         compatible = "fsl,imx51-esdhc";
 169                                         reg = <0x70004000 0x4000>;
 170                                         interrupts = <1>;
 171                                         clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
 172                                                  <&clks IMX5_CLK_DUMMY>,
 173                                                  <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 174                                         clock-names = "ipg", "ahb", "per";
 175                                         status = "disabled";
 176                                 };
 177
 178                                 esdhc2: esdhc@70008000 {
 179                                         compatible = "fsl,imx51-esdhc";
 180                                         reg = <0x70008000 0x4000>;
 181                                         interrupts = <2>;
 182                                         clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
 183                                                  <&clks IMX5_CLK_DUMMY>,
 184                                                  <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 185                                         clock-names = "ipg", "ahb", "per";
 186                                         bus-width = <4>;
 187                                         status = "disabled";
 188                                 };
 189
 190                                 uart3: serial@7000c000 {
 191                                         compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 192                                         reg = <0x7000c000 0x4000>;
 193                                         interrupts = <33>;
 194                                         clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
 195                                                  <&clks IMX5_CLK_UART3_PER_GATE>;
 196                                         clock-names = "ipg", "per";
 197                                         status = "disabled";
 198                                 };
 199
 200                                 ecspi1: ecspi@70010000 {
 201                                         #address-cells = <1>;
 202                                         #size-cells = <0>;
 203                                         compatible = "fsl,imx51-ecspi";
 204                                         reg = <0x70010000 0x4000>;
 205                                         interrupts = <36>;
 206                                         clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
 207                                                  <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 208                                         clock-names = "ipg", "per";
 209                                         status = "disabled";
 210                                 };
 211
 212                                 ssi2: ssi@70014000 {
 213                                         #sound-dai-cells = <0>;
 214                                         compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 215                                         reg = <0x70014000 0x4000>;
 216                                         interrupts = <30>;
 217                                         clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
 218                                                  <&clks IMX5_CLK_SSI2_ROOT_GATE>;
 219                                         clock-names = "ipg", "baud";
 220                                         dmas = <&sdma 24 1 0>,
 221                                                <&sdma 25 1 0>;
 222                                         dma-names = "rx", "tx";
 223                                         fsl,fifo-depth = <15>;
 224                                         status = "disabled";
 225                                 };
 226
 227                                 esdhc3: esdhc@70020000 {
 228                                         compatible = "fsl,imx51-esdhc";
 229                                         reg = <0x70020000 0x4000>;
 230                                         interrupts = <3>;
 231                                         clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
 232                                                  <&clks IMX5_CLK_DUMMY>,
 233                                                  <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 234                                         clock-names = "ipg", "ahb", "per";
 235                                         bus-width = <4>;
 236                                         status = "disabled";
 237                                 };
 238
 239                                 esdhc4: esdhc@70024000 {
 240                                         compatible = "fsl,imx51-esdhc";
 241                                         reg = <0x70024000 0x4000>;
 242                                         interrupts = <4>;
 243                                         clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
 244                                                  <&clks IMX5_CLK_DUMMY>,
 245                                                  <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 246                                         clock-names = "ipg", "ahb", "per";
 247                                         bus-width = <4>;
 248                                         status = "disabled";
 249                                 };
 250                         };
 251
 252                         usbotg: usb@73f80000 {
 253                                 compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 254                                 reg = <0x73f80000 0x0200>;
 255                                 interrupts = <18>;
 256                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 257                                 fsl,usbmisc = <&usbmisc 0>;
 258                                 fsl,usbphy = <&usbphy0>;
 259                                 status = "disabled";
 260                         };
 261
 262                         usbh1: usb@73f80200 {
 263                                 compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 264                                 reg = <0x73f80200 0x0200>;
 265                                 interrupts = <14>;
 266                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 267                                 fsl,usbmisc = <&usbmisc 1>;
 268                                 status = "disabled";
 269                         };
 270
 271                         usbh2: usb@73f80400 {
 272                                 compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 273                                 reg = <0x73f80400 0x0200>;
 274                                 interrupts = <16>;
 275                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 276                                 fsl,usbmisc = <&usbmisc 2>;
 277                                 status = "disabled";
 278                         };
 279
 280                         usbh3: usb@73f80600 {
 281                                 compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 282                                 reg = <0x73f80600 0x0200>;
 283                                 interrupts = <17>;
 284                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 285                                 fsl,usbmisc = <&usbmisc 3>;
 286                                 status = "disabled";
 287                         };
 288
 289                         usbmisc: usbmisc@73f80800 {
 290                                 #index-cells = <1>;
 291                                 compatible = "fsl,imx51-usbmisc";
 292                                 reg = <0x73f80800 0x200>;
 293                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 294                         };
 295
 296                         gpio1: gpio@73f84000 {
 297                                 compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 298                                 reg = <0x73f84000 0x4000>;
 299                                 interrupts = <50 51>;
 300                                 gpio-controller;
 301                                 #gpio-cells = <2>;
 302                                 interrupt-controller;
 303                                 #interrupt-cells = <2>;
 304                         };
 305
 306                         gpio2: gpio@73f88000 {
 307                                 compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 308                                 reg = <0x73f88000 0x4000>;
 309                                 interrupts = <52 53>;
 310                                 gpio-controller;
 311                                 #gpio-cells = <2>;
 312                                 interrupt-controller;
 313                                 #interrupt-cells = <2>;
 314                         };
 315
 316                         gpio3: gpio@73f8c000 {
 317                                 compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 318                                 reg = <0x73f8c000 0x4000>;
 319                                 interrupts = <54 55>;
 320                                 gpio-controller;
 321                                 #gpio-cells = <2>;
 322                                 interrupt-controller;
 323                                 #interrupt-cells = <2>;
 324                         };
 325
 326                         gpio4: gpio@73f90000 {
 327                                 compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 328                                 reg = <0x73f90000 0x4000>;
 329                                 interrupts = <56 57>;
 330                                 gpio-controller;
 331                                 #gpio-cells = <2>;
 332                                 interrupt-controller;
 333                                 #interrupt-cells = <2>;
 334                         };
 335
 336                         kpp: kpp@73f94000 {
 337                                 compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
 338                                 reg = <0x73f94000 0x4000>;
 339                                 interrupts = <60>;
 340                                 clocks = <&clks IMX5_CLK_DUMMY>;
 341                                 status = "disabled";
 342                         };
 343
 344                         wdog1: wdog@73f98000 {
 345                                 compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 346                                 reg = <0x73f98000 0x4000>;
 347                                 interrupts = <58>;
 348                                 clocks = <&clks IMX5_CLK_DUMMY>;
 349                         };
 350
 351                         wdog2: wdog@73f9c000 {
 352                                 compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 353                                 reg = <0x73f9c000 0x4000>;
 354                                 interrupts = <59>;
 355                                 clocks = <&clks IMX5_CLK_DUMMY>;
 356                                 status = "disabled";
 357                         };
 358
 359                         gpt: timer@73fa0000 {
 360                                 compatible = "fsl,imx51-gpt", "fsl,imx31-gpt";
 361                                 reg = <0x73fa0000 0x4000>;
 362                                 interrupts = <39>;
 363                                 clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
 364                                          <&clks IMX5_CLK_GPT_HF_GATE>;
 365                                 clock-names = "ipg", "per";
 366                         };
 367
 368                         iomuxc: iomuxc@73fa8000 {
 369                                 compatible = "fsl,imx51-iomuxc";
 370                                 reg = <0x73fa8000 0x4000>;
 371                         };
 372
 373                         pwm1: pwm@73fb4000 {
 374                                 #pwm-cells = <2>;
 375                                 compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 376                                 reg = <0x73fb4000 0x4000>;
 377                                 clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
 378                                          <&clks IMX5_CLK_PWM1_HF_GATE>;
 379                                 clock-names = "ipg", "per";
 380                                 interrupts = <61>;
 381                         };
 382
 383                         pwm2: pwm@73fb8000 {
 384                                 #pwm-cells = <2>;
 385                                 compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 386                                 reg = <0x73fb8000 0x4000>;
 387                                 clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
 388                                          <&clks IMX5_CLK_PWM2_HF_GATE>;
 389                                 clock-names = "ipg", "per";
 390                                 interrupts = <94>;
 391                         };
 392
 393                         uart1: serial@73fbc000 {
 394                                 compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 395                                 reg = <0x73fbc000 0x4000>;
 396                                 interrupts = <31>;
 397                                 clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
 398                                          <&clks IMX5_CLK_UART1_PER_GATE>;
 399                                 clock-names = "ipg", "per";
 400                                 status = "disabled";
 401                         };
 402
 403                         uart2: serial@73fc0000 {
 404                                 compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 405                                 reg = <0x73fc0000 0x4000>;
 406                                 interrupts = <32>;
 407                                 clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
 408                                          <&clks IMX5_CLK_UART2_PER_GATE>;
 409                                 clock-names = "ipg", "per";
 410                                 status = "disabled";
 411                         };
 412
 413                         src: src@73fd0000 {
 414                                 compatible = "fsl,imx51-src";
 415                                 reg = <0x73fd0000 0x4000>;
 416                                 #reset-cells = <1>;
 417                         };
 418
 419                         clks: ccm@73fd4000{
 420                                 compatible = "fsl,imx51-ccm";
 421                                 reg = <0x73fd4000 0x4000>;
 422                                 interrupts = <0 71 0x04 0 72 0x04>;
 423                                 #clock-cells = <1>;
 424                         };
 425                 };
 426
 427                 aips@80000000 { /* AIPS2 */
 428                         compatible = "fsl,aips-bus", "simple-bus";
 429                         #address-cells = <1>;
 430                         #size-cells = <1>;
 431                         reg = <0x80000000 0x10000000>;
 432                         ranges;
 433
 434                         iim: iim@83f98000 {
 435                                 compatible = "fsl,imx51-iim", "fsl,imx27-iim";
 436                                 reg = <0x83f98000 0x4000>;
 437                                 interrupts = <69>;
 438                                 clocks = <&clks IMX5_CLK_IIM_GATE>;
 439                         };
 440
 441                         owire: owire@83fa4000 {
 442                                 compatible = "fsl,imx51-owire", "fsl,imx21-owire";
 443                                 reg = <0x83fa4000 0x4000>;
 444                                 interrupts = <88>;
 445                                 clocks = <&clks IMX5_CLK_OWIRE_GATE>;
 446                                 status = "disabled";
 447                         };
 448
 449                         ecspi2: ecspi@83fac000 {
 450                                 #address-cells = <1>;
 451                                 #size-cells = <0>;
 452                                 compatible = "fsl,imx51-ecspi";
 453                                 reg = <0x83fac000 0x4000>;
 454                                 interrupts = <37>;
 455                                 clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
 456                                          <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 457                                 clock-names = "ipg", "per";
 458                                 status = "disabled";
 459                         };
 460
 461                         sdma: sdma@83fb0000 {
 462                                 compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 463                                 reg = <0x83fb0000 0x4000>;
 464                                 interrupts = <6>;
 465                                 clocks = <&clks IMX5_CLK_SDMA_GATE>,
 466                                          <&clks IMX5_CLK_SDMA_GATE>;
 467                                 clock-names = "ipg", "ahb";
 468                                 #dma-cells = <3>;
 469                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
 470                         };
 471
 472                         cspi: cspi@83fc0000 {
 473                                 #address-cells = <1>;
 474                                 #size-cells = <0>;
 475                                 compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
 476                                 reg = <0x83fc0000 0x4000>;
 477                                 interrupts = <38>;
 478                                 clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
 479                                          <&clks IMX5_CLK_CSPI_IPG_GATE>;
 480                                 clock-names = "ipg", "per";
 481                                 status = "disabled";
 482                         };
 483
 484                         i2c2: i2c@83fc4000 {
 485                                 #address-cells = <1>;
 486                                 #size-cells = <0>;
 487                                 compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 488                                 reg = <0x83fc4000 0x4000>;
 489                                 interrupts = <63>;
 490                                 clocks = <&clks IMX5_CLK_I2C2_GATE>;
 491                                 status = "disabled";
 492                         };
 493
 494                         i2c1: i2c@83fc8000 {
 495                                 #address-cells = <1>;
 496                                 #size-cells = <0>;
 497                                 compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
 498                                 reg = <0x83fc8000 0x4000>;
 499                                 interrupts = <62>;
 500                                 clocks = <&clks IMX5_CLK_I2C1_GATE>;
 501                                 status = "disabled";
 502                         };
 503
 504                         ssi1: ssi@83fcc000 {
 505                                 #sound-dai-cells = <0>;
 506                                 compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 507                                 reg = <0x83fcc000 0x4000>;
 508                                 interrupts = <29>;
 509                                 clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
 510                                          <&clks IMX5_CLK_SSI1_ROOT_GATE>;
 511                                 clock-names = "ipg", "baud";
 512                                 dmas = <&sdma 28 0 0>,
 513                                        <&sdma 29 0 0>;
 514                                 dma-names = "rx", "tx";
 515                                 fsl,fifo-depth = <15>;
 516                                 status = "disabled";
 517                         };
 518
 519                         audmux: audmux@83fd0000 {
 520                                 compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
 521                                 reg = <0x83fd0000 0x4000>;
 522                                 clocks = <&clks IMX5_CLK_DUMMY>;
 523                                 clock-names = "audmux";
 524                                 status = "disabled";
 525                         };
 526
 527                         weim: weim@83fda000 {
 528                                 #address-cells = <2>;
 529                                 #size-cells = <1>;
 530                                 compatible = "fsl,imx51-weim";
 531                                 reg = <0x83fda000 0x1000>;
 532                                 clocks = <&clks IMX5_CLK_EMI_SLOW_GATE>;
 533                                 ranges = <
 534                                         0 0 0xb0000000 0x08000000
 535                                         1 0 0xb8000000 0x08000000
 536                                         2 0 0xc0000000 0x08000000
 537                                         3 0 0xc8000000 0x04000000
 538                                         4 0 0xcc000000 0x02000000
 539                                         5 0 0xce000000 0x02000000
 540                                 >;
 541                                 status = "disabled";
 542                         };
 543
 544                         nfc: nand@83fdb000 {
 545                                 #address-cells = <1>;
 546                                 #size-cells = <1>;
 547                                 compatible = "fsl,imx51-nand";
 548                                 reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
 549                                 interrupts = <8>;
 550                                 clocks = <&clks IMX5_CLK_NFC_GATE>;
 551                                 status = "disabled";
 552                         };
 553
 554                         pata: pata@83fe0000 {
 555                                 compatible = "fsl,imx51-pata", "fsl,imx27-pata";
 556                                 reg = <0x83fe0000 0x4000>;
 557                                 interrupts = <70>;
 558                                 clocks = <&clks IMX5_CLK_PATA_GATE>;
 559                                 status = "disabled";
 560                         };
 561
 562                         ssi3: ssi@83fe8000 {
 563                                 #sound-dai-cells = <0>;
 564                                 compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 565                                 reg = <0x83fe8000 0x4000>;
 566                                 interrupts = <96>;
 567                                 clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
 568                                          <&clks IMX5_CLK_SSI3_ROOT_GATE>;
 569                                 clock-names = "ipg", "baud";
 570                                 dmas = <&sdma 46 0 0>,
 571                                        <&sdma 47 0 0>;
 572                                 dma-names = "rx", "tx";
 573                                 fsl,fifo-depth = <15>;
 574                                 status = "disabled";
 575                         };
 576
 577                         fec: ethernet@83fec000 {
 578                                 compatible = "fsl,imx51-fec", "fsl,imx27-fec";
 579                                 reg = <0x83fec000 0x4000>;
 580                                 interrupts = <87>;
 581                                 clocks = <&clks IMX5_CLK_FEC_GATE>,
 582                                          <&clks IMX5_CLK_FEC_GATE>,
 583                                          <&clks IMX5_CLK_FEC_GATE>;
 584                                 clock-names = "ipg", "ahb", "ptp";
 585                                 status = "disabled";
 586                         };
 587                 };
 588         };
 589 };