arch/arm/boot/dts/imx6q-cm-fx6.dts

   1 /*
   2  * Copyright 2013 CompuLab Ltd.
   3  *
   4  * Author: Valentin Raevsky <valentin@compulab.co.il>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License
  13  *     version 2 as published by the Free Software Foundation.
  14  *
  15  *     This file is distributed in the hope that it will be useful,
  16  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  *     GNU General Public License for more details.
  19  *
  20  * Or, alternatively,
  21  *
  22  *  b) Permission is hereby granted, free of charge, to any person
  23  *     obtaining a copy of this software and associated documentation
  24  *     files (the "Software"), to deal in the Software without
  25  *     restriction, including without limitation the rights to use,
  26  *     copy, modify, merge, publish, distribute, sublicense, and/or
  27  *     sell copies of the Software, and to permit persons to whom the
  28  *     Software is furnished to do so, subject to the following
  29  *     conditions:
  30  *
  31  *     The above copyright notice and this permission notice shall be
  32  *     included in all copies or substantial portions of the Software.
  33  *
  34  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  35  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  36  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  37  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  38  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  39  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  40  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  41  *     OTHER DEALINGS IN THE SOFTWARE.
  42  */
  43
  44 /dts-v1/;
  45 #include <dt-bindings/gpio/gpio.h>
  46 #include <dt-bindings/sound/fsl-imx-audmux.h>
  47 #include "imx6q.dtsi"
  48
  49 / {
  50         model = "CompuLab CM-FX6";
  51         compatible = "compulab,cm-fx6", "fsl,imx6q";
  52
  53         memory@10000000 {
  54                 reg = <0x10000000 0x80000000>;
  55         };
  56
  57         leds {
  58                 compatible = "gpio-leds";
  59
  60                 heartbeat-led {
  61                         label = "Heartbeat";
  62                         gpios = <&gpio2 31 0>;
  63                         linux,default-trigger = "heartbeat";
  64                 };
  65         };
  66
  67         awnh387_pwrseq: pwrseq {
  68                 pinctrl-names = "default";
  69                 pinctrl-0 = <&pinctrl_pwrseq>;
  70                 compatible = "mmc-pwrseq-sd8787";
  71                 powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
  72                 reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
  73         };
  74
  75         reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
  76                 compatible = "regulator-fixed";
  77                 regulator-name = "regulator-pcie-power-on-gpio";
  78                 regulator-min-microvolt = <3300000>;
  79                 regulator-max-microvolt = <3300000>;
  80                 gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
  81         };
  82
  83         reg_usb_h1_vbus: usb_h1_vbus {
  84                 compatible = "regulator-fixed";
  85                 regulator-name = "usb_h1_vbus";
  86                 regulator-min-microvolt = <5000000>;
  87                 regulator-max-microvolt = <5000000>;
  88                 gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
  89                 enable-active-high;
  90         };
  91
  92         reg_usb_otg_vbus: usb_otg_vbus {
  93                 compatible = "regulator-fixed";
  94                 regulator-name = "usb_otg_vbus";
  95                 regulator-min-microvolt = <5000000>;
  96                 regulator-max-microvolt = <5000000>;
  97                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
  98                 enable-active-high;
  99         };
 100
 101         sound-analog {
 102                 compatible = "simple-audio-card";
 103                 simple-audio-card,name = "On-board analog audio";
 104                 simple-audio-card,widgets =
 105                         "Headphone", "Headphone Jack",
 106                         "Line", "Line Out",
 107                         "Microphone", "Mic Jack",
 108                         "Line", "Line In";
 109                 simple-audio-card,routing =
 110                         "Headphone Jack", "RHPOUT",
 111                         "Headphone Jack", "LHPOUT",
 112                         "MICIN", "Mic Bias",
 113                         "Mic Bias", "Mic Jack";
 114                 simple-audio-card,format = "i2s";
 115                 simple-audio-card,bitclock-master = <&sound_master>;
 116                 simple-audio-card,frame-master = <&sound_master>;
 117                 simple-audio-card,bitclock-inversion;
 118
 119                 sound_master: simple-audio-card,cpu {
 120                         sound-dai = <&ssi2>;
 121                         system-clock-frequency = <2822400>;
 122                 };
 123
 124                 simple-audio-card,codec {
 125                         sound-dai = <&wm8731>;
 126                 };
 127         };
 128
 129         sound-spdif {
 130                 compatible = "fsl,imx-audio-spdif";
 131                 model = "imx-spdif";
 132                 spdif-controller = <&spdif>;
 133                 spdif-out;
 134                 spdif-in;
 135         };
 136 };
 137
 138 &audmux {
 139         pinctrl-names = "default";
 140         pinctrl-0 = <&pinctrl_audmux>;
 141         status = "okay";
 142
 143         ssi2 {
 144                 fsl,audmux-port = <1>;
 145                 fsl,port-config = <
 146                         (IMX_AUDMUX_V2_PTCR_RCLKDIR |
 147                         IMX_AUDMUX_V2_PTCR_RCSEL(3 | 0x8) |
 148                         IMX_AUDMUX_V2_PTCR_TCLKDIR |
 149                         IMX_AUDMUX_V2_PTCR_TCSEL(3))
 150                         IMX_AUDMUX_V2_PDCR_RXDSEL(3)
 151                 >;
 152         };
 153
 154         audmux4 {
 155                 fsl,audmux-port = <3>;
 156                 fsl,port-config = <
 157                         (IMX_AUDMUX_V2_PTCR_TFSDIR |
 158                         IMX_AUDMUX_V2_PTCR_TFSEL(1) |
 159                         IMX_AUDMUX_V2_PTCR_RCLKDIR |
 160                         IMX_AUDMUX_V2_PTCR_RCSEL(1 | 0x8) |
 161                         IMX_AUDMUX_V2_PTCR_TCLKDIR |
 162                         IMX_AUDMUX_V2_PTCR_TCSEL(1))
 163                         IMX_AUDMUX_V2_PDCR_RXDSEL(1)
 164                 >;
 165         };
 166 };
 167
 168 &cpu0 {
 169         /*
 170          * Although the imx6q fuse indicates that 1.2GHz operation is possible,
 171          * the module behaves unstable at this frequency. Hence, remove the
 172          * 1.2GHz operation point here.
 173          */
 174         operating-points = <
 175                 /* kHz  uV */
 176                 996000  1250000
 177                 852000  1250000
 178                 792000  1175000
 179                 396000  975000
 180         >;
 181         fsl,soc-operating-points = <
 182                 /* ARM kHz      SOC-PU uV */
 183                 996000          1250000
 184                 852000          1250000
 185                 792000          1175000
 186                 396000          1175000
 187         >;
 188 };
 189
 190 &cpu1 {
 191         /*
 192          * Although the imx6q fuse indicates that 1.2GHz operation is possible,
 193          * the module behaves unstable at this frequency. Hence, remove the
 194          * 1.2GHz operation point here.
 195          */
 196         operating-points = <
 197                 /* kHz  uV */
 198                 996000  1250000
 199                 852000  1250000
 200                 792000  1175000
 201                 396000  975000
 202         >;
 203         fsl,soc-operating-points = <
 204                 /* ARM kHz      SOC-PU uV */
 205                 996000          1250000
 206                 852000          1250000
 207                 792000          1175000
 208                 396000          1175000
 209         >;
 210 };
 211
 212 &cpu2 {
 213         /*
 214          * Although the imx6q fuse indicates that 1.2GHz operation is possible,
 215          * the module behaves unstable at this frequency. Hence, remove the
 216          * 1.2GHz operation point here.
 217          */
 218         operating-points = <
 219                 /* kHz  uV */
 220                 996000  1250000
 221                 852000  1250000
 222                 792000  1175000
 223                 396000  975000
 224         >;
 225         fsl,soc-operating-points = <
 226                 /* ARM kHz      SOC-PU uV */
 227                 996000          1250000
 228                 852000          1250000
 229                 792000          1175000
 230                 396000          1175000
 231         >;
 232 };
 233
 234 &cpu3 {
 235         /*
 236          * Although the imx6q fuse indicates that 1.2GHz operation is possible,
 237          * the module behaves unstable at this frequency. Hence, remove the
 238          * 1.2GHz operation point here.
 239          */
 240         operating-points = <
 241                 /* kHz  uV */
 242                 996000  1250000
 243                 852000  1250000
 244                 792000  1175000
 245                 396000  975000
 246         >;
 247         fsl,soc-operating-points = <
 248                 /* ARM kHz      SOC-PU uV */
 249                 996000          1250000
 250                 852000          1250000
 251                 792000          1175000
 252                 396000          1175000
 253         >;
 254 };
 255
 256 &ecspi1 {
 257         cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
 258         pinctrl-names = "default";
 259         pinctrl-0 = <&pinctrl_ecspi1>;
 260         status = "okay";
 261
 262         m25p80@0 {
 263                 #address-cells = <1>;
 264                 #size-cells = <1>;
 265                 compatible = "st,m25p", "jedec,spi-nor";
 266                 spi-max-frequency = <20000000>;
 267                 reg = <0>;
 268         };
 269 };
 270
 271 &fec {
 272         pinctrl-names = "default";
 273         pinctrl-0 = <&pinctrl_enet>;
 274         phy-mode = "rgmii";
 275         status = "okay";
 276 };
 277
 278 &gpmi {
 279         pinctrl-names = "default";
 280         pinctrl-0 = <&pinctrl_gpmi_nand>;
 281         status = "okay";
 282 };
 283
 284 &i2c3 {
 285         pinctrl-names = "default";
 286         pinctrl-0 = <&pinctrl_i2c3>;
 287         status = "okay";
 288         clock-frequency = <100000>;
 289
 290         eeprom@50 {
 291                 compatible = "atmel,24c02";
 292                 reg = <0x50>;
 293                 pagesize = <16>;
 294         };
 295
 296         wm8731: codec@1a {
 297                 #sound-dai-cells = <0>;
 298                 compatible = "wlf,wm8731";
 299                 reg = <0x1a>;
 300         };
 301 };
 302
 303 &iomuxc {
 304         pinctrl_audmux: audmuxgrp {
 305                 fsl,pins = <
 306                         MX6QDL_PAD_SD2_CMD__AUD4_RXC   0x17059
 307                         MX6QDL_PAD_SD2_DAT0__AUD4_RXD  0x17059
 308                         MX6QDL_PAD_SD2_DAT3__AUD4_TXC  0x17059
 309                         MX6QDL_PAD_SD2_DAT2__AUD4_TXD  0x17059
 310                         MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x17059
 311                 >;
 312         };
 313
 314         pinctrl_ecspi1: ecspi1grp {
 315                 fsl,pins = <
 316                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
 317                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
 318                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
 319                         MX6QDL_PAD_EIM_EB2__GPIO2_IO30  0x100b1
 320                         MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x100b1
 321                 >;
 322         };
 323
 324         pinctrl_enet: enetgrp {
 325                 fsl,pins = <
 326                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 327                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 328                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 329                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 330                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 331                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 332                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 333                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 334                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 335                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 336                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 337                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 338                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 339                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 340                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 341                 >;
 342         };
 343
 344         pinctrl_gpmi_nand: gpminandgrp {
 345                 fsl,pins = <
 346                         MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
 347                         MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
 348                         MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
 349                         MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
 350                         MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
 351                         MX6QDL_PAD_NANDF_CS1__NAND_CE1_B        0xb0b1
 352                         MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
 353                         MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
 354                         MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
 355                         MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
 356                         MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
 357                         MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
 358                         MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
 359                         MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
 360                         MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
 361                         MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
 362                         MX6QDL_PAD_SD4_DAT0__NAND_DQS           0x00b1
 363                 >;
 364         };
 365
 366         pinctrl_i2c3: i2c3grp {
 367                 fsl,pins = <
 368                         MX6QDL_PAD_GPIO_3__I2C3_SCL     0x4001b8b1
 369                         MX6QDL_PAD_GPIO_6__I2C3_SDA     0x4001b8b1
 370                 >;
 371         };
 372
 373         pinctrl_pcie: pciegrp {
 374                 fsl,pins = <
 375                         MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
 376                         MX6QDL_PAD_EIM_CS1__GPIO2_IO24  0x1b0b1
 377                 >;
 378         };
 379
 380         pinctrl_pwrseq: pwrseqgrp {
 381                 fsl,pins = <
 382                         MX6QDL_PAD_GPIO_17__GPIO7_IO12          0x1b0b0
 383                         MX6QDL_PAD_NANDF_CS3__GPIO6_IO16        0x1b0b0
 384                 >;
 385         };
 386
 387         pinctrl_spdif: spdifgrp {
 388                 fsl,pins = <
 389                         MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
 390                         MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
 391                 >;
 392         };
 393
 394         pinctrl_uart4: uart4grp {
 395                 fsl,pins = <
 396                         MX6QDL_PAD_KEY_COL0__UART4_TX_DATA      0x1b0b1
 397                         MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA      0x1b0b1
 398                 >;
 399         };
 400
 401         pinctrl_usbh1: usbh1grp {
 402                 fsl,pins = <
 403                         MX6QDL_PAD_SD3_RST__GPIO7_IO08  0x1b0b1
 404                 >;
 405         };
 406
 407         pinctrl_usbotg: usbotggrp {
 408                 fsl,pins = <
 409                         MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x17059
 410                         MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x130b0
 411                 >;
 412         };
 413
 414         pinctrl_usdhc1: usdhc1grp {
 415                 fsl,pins = <
 416                         MX6QDL_PAD_SD1_CMD__SD1_CMD     0x17071
 417                         MX6QDL_PAD_SD1_CLK__SD1_CLK     0x10071
 418                         MX6QDL_PAD_SD1_DAT0__SD1_DATA0  0x17071
 419                         MX6QDL_PAD_SD1_DAT1__SD1_DATA1  0x17071
 420                         MX6QDL_PAD_SD1_DAT2__SD1_DATA2  0x17071
 421                         MX6QDL_PAD_SD1_DAT3__SD1_DATA3  0x17071
 422                 >;
 423         };
 424 };
 425
 426 &pcie {
 427         pinctrl-names = "default";
 428         pinctrl-0 = <&pinctrl_pcie>;
 429         reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
 430         vpcie-supply = <&reg_pcie_power_on_gpio>;
 431         status = "okay";
 432 };
 433
 434 &sata {
 435         status = "okay";
 436 };
 437
 438 &snvs_poweroff {
 439         status = "okay";
 440 };
 441
 442 &spdif {
 443         pinctrl-names = "default";
 444         pinctrl-0 = <&pinctrl_spdif>;
 445         status = "okay";
 446 };
 447
 448 &ssi2 {
 449         assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>,
 450                         <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
 451         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
 452         assigned-clock-rates = <0>, <786432000>;
 453         status = "okay";
 454 };
 455
 456 &uart4 {
 457         pinctrl-names = "default";
 458         pinctrl-0 = <&pinctrl_uart4>;
 459         status = "okay";
 460 };
 461
 462 &usbh1 {
 463         vbus-supply = <&reg_usb_h1_vbus>;
 464         pinctrl-names = "default";
 465         pinctrl-0 = <&pinctrl_usbh1>;
 466         status = "okay";
 467 };
 468
 469 &usbotg {
 470         vbus-supply = <&reg_usb_otg_vbus>;
 471         pinctrl-names = "default";
 472         pinctrl-0 = <&pinctrl_usbotg>;
 473         dr_mode = "otg";
 474         status = "okay";
 475 };
 476
 477 &usdhc1 {
 478         pinctrl-names = "default";
 479         pinctrl-0 = <&pinctrl_usdhc1>;
 480         mmc-pwrseq = <&awnh387_pwrseq>;
 481         non-removable;
 482         /*
 483          * If the OS probes the Bluetooth AMP function advertised on this bus
 484          * but the firmware in place does not support it, the WiFi/BT module
 485          * gets unresponsive.
 486          * Users who configured their OS properly can enable this node to gain
 487          * WiFi and/or plain Bluetooth support.
 488          */
 489         status = "disabled";
 490 };