arch/arm/boot/dts/imx6q-dhcom-som.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+)
   2 /*
   3  * Copyright (C) 2015 DH electronics GmbH
   4  * Copyright (C) 2018 Marek Vasut <marex@denx.de>
   5  */
   6
   7 #include "imx6q.dtsi"
   8 #include <dt-bindings/pwm/pwm.h>
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/clock/imx6qdl-clock.h>
  11 #include <dt-bindings/input/input.h>
  12
  13 / {
  14         aliases {
  15                 mmc0 = &usdhc2;
  16                 mmc1 = &usdhc3;
  17                 mmc2 = &usdhc4;
  18                 mmc3 = &usdhc1;
  19         };
  20
  21         memory@10000000 {
  22                 device_type = "memory";
  23                 reg = <0x10000000 0x40000000>;
  24         };
  25
  26         reg_usb_otg_vbus: regulator-usb-otg-vbus {
  27                 compatible = "regulator-fixed";
  28                 regulator-name = "usb_otg_vbus";
  29                 regulator-min-microvolt = <5000000>;
  30                 regulator-max-microvolt = <5000000>;
  31         };
  32
  33         reg_usb_h1_vbus: regulator-usb-h1-vbus {
  34                 compatible = "regulator-fixed";
  35                 regulator-name = "usb_h1_vbus";
  36                 regulator-min-microvolt = <5000000>;
  37                 regulator-max-microvolt = <5000000>;
  38                 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
  39                 enable-active-high;
  40         };
  41
  42         reg_3p3v: regulator-3P3V {
  43                 compatible = "regulator-fixed";
  44                 regulator-name = "3P3V";
  45                 regulator-min-microvolt = <3300000>;
  46                 regulator-max-microvolt = <3300000>;
  47                 regulator-always-on;
  48         };
  49 };
  50
  51 &can1 {
  52         pinctrl-names = "default";
  53         pinctrl-0 = <&pinctrl_flexcan1>;
  54         status = "okay";
  55 };
  56
  57 &can2 {
  58         pinctrl-names = "default";
  59         pinctrl-0 = <&pinctrl_flexcan2>;
  60         status = "okay";
  61 };
  62
  63 &ecspi1 {
  64         cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio4 11 GPIO_ACTIVE_HIGH>;
  65         pinctrl-names = "default";
  66         pinctrl-0 = <&pinctrl_ecspi1>;
  67         status = "okay";
  68
  69         flash@0 {       /* S25FL116K */
  70                 #address-cells = <1>;
  71                 #size-cells = <1>;
  72                 compatible = "jedec,spi-nor";
  73                 spi-max-frequency = <50000000>;
  74                 reg = <0>;
  75                 m25p,fast-read;
  76         };
  77 };
  78
  79 &ecspi2 {
  80         cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
  81         pinctrl-names = "default";
  82         pinctrl-0 = <&pinctrl_ecspi2>;
  83         status = "okay";
  84 };
  85
  86 &fec {
  87         pinctrl-names = "default";
  88         pinctrl-0 = <&pinctrl_enet_100M>;
  89         phy-mode = "rmii";
  90         phy-handle = <&ethphy0>;
  91         status = "okay";
  92
  93         mdio {
  94                 #address-cells = <1>;
  95                 #size-cells = <0>;
  96
  97                 ethphy0: ethernet-phy@0 {       /* SMSC LAN8710Ai */
  98                         reg = <0>;
  99                         max-speed = <100>;
 100                         reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 101                         reset-delay-us = <1000>;
 102                         reset-post-delay-us = <1000>;
 103                 };
 104         };
 105 };
 106
 107 &i2c1 {
 108         clock-frequency = <100000>;
 109         pinctrl-names = "default";
 110         pinctrl-0 = <&pinctrl_i2c1>;
 111         status = "okay";
 112 };
 113
 114 &i2c2 {
 115         clock-frequency = <100000>;
 116         pinctrl-names = "default";
 117         pinctrl-0 = <&pinctrl_i2c2>;
 118         status = "okay";
 119 };
 120
 121 &i2c3 {
 122         clock-frequency = <100000>;
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&pinctrl_i2c3>;
 125         status = "okay";
 126
 127         ltc3676: pmic@3c {
 128                 compatible = "lltc,ltc3676";
 129                 pinctrl-names = "default";
 130                 pinctrl-0 = <&pinctrl_pmic_hw300>;
 131                 reg = <0x3c>;
 132                 interrupt-parent = <&gpio5>;
 133                 interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 134
 135                 regulators {
 136                         sw1_reg: sw1 {
 137                                 regulator-min-microvolt = <787500>;
 138                                 regulator-max-microvolt = <1527272>;
 139                                 lltc,fb-voltage-divider = <100000 110000>;
 140                                 regulator-suspend-mem-microvolt = <1040000>;
 141                                 regulator-ramp-delay = <7000>;
 142                                 regulator-boot-on;
 143                                 regulator-always-on;
 144                         };
 145
 146                         sw2_reg: sw2 {
 147                                 regulator-min-microvolt = <1885714>;
 148                                 regulator-max-microvolt = <3657142>;
 149                                 lltc,fb-voltage-divider = <100000 28000>;
 150                                 regulator-ramp-delay = <7000>;
 151                                 regulator-boot-on;
 152                                 regulator-always-on;
 153                         };
 154
 155                         sw3_reg: sw3 {
 156                                 regulator-min-microvolt = <787500>;
 157                                 regulator-max-microvolt = <1527272>;
 158                                 lltc,fb-voltage-divider = <100000 110000>;
 159                                 regulator-suspend-mem-microvolt = <980000>;
 160                                 regulator-ramp-delay = <7000>;
 161                                 regulator-boot-on;
 162                                 regulator-always-on;
 163                         };
 164
 165                         sw4_reg: sw4 {
 166                                 regulator-min-microvolt = <855571>;
 167                                 regulator-max-microvolt = <1659291>;
 168                                 lltc,fb-voltage-divider = <100000 93100>;
 169                                 regulator-ramp-delay = <7000>;
 170                                 regulator-boot-on;
 171                                 regulator-always-on;
 172                         };
 173
 174                         ldo1_reg: ldo1 {
 175                                 regulator-min-microvolt = <3240306>;
 176                                 regulator-max-microvolt = <3240306>;
 177                                 lltc,fb-voltage-divider = <102000 29400>;
 178                                 regulator-boot-on;
 179                                 regulator-always-on;
 180                         };
 181
 182                         ldo2_reg: ldo2 {
 183                                 regulator-min-microvolt = <2484708>;
 184                                 regulator-max-microvolt = <2484708>;
 185                                 lltc,fb-voltage-divider = <100000 41200>;
 186                                 regulator-boot-on;
 187                                 regulator-always-on;
 188                         };
 189                 };
 190         };
 191
 192         touchscreen@49 {        /* TSC2004 */
 193                 compatible = "ti,tsc2004";
 194                 reg = <0x49>;
 195                 vio-supply = <&reg_3p3v>;
 196                 pinctrl-names = "default";
 197                 pinctrl-0 = <&pinctrl_tsc2004_hw300>;
 198                 interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
 199                 status = "disabled";
 200         };
 201
 202         eeprom@50 {
 203                 compatible = "atmel,24c02";
 204                 reg = <0x50>;
 205                 pagesize = <16>;
 206         };
 207
 208         rtc@56 {
 209                 compatible = "rv3029c2";
 210                 pinctrl-names = "default";
 211                 pinctrl-0 = <&pinctrl_rtc_hw300>;
 212                 reg = <0x56>;
 213                 interrupt-parent = <&gpio7>;
 214                 interrupts = <12 2>;
 215         };
 216 };
 217
 218 &iomuxc {
 219         pinctrl-names = "default";
 220         pinctrl-0 = <&pinctrl_hog_base>;
 221
 222         pinctrl_hog_base: hog-base-grp {
 223                 fsl,pins = <
 224                         MX6QDL_PAD_EIM_A19__GPIO2_IO19          0x120b0
 225                         MX6QDL_PAD_EIM_A23__GPIO6_IO06          0x120b0
 226                         MX6QDL_PAD_EIM_A22__GPIO2_IO16          0x120b0
 227                         MX6QDL_PAD_EIM_A16__GPIO2_IO22          0x120b0
 228                         MX6QDL_PAD_EIM_A17__GPIO2_IO21          0x120b0
 229                 >;
 230         };
 231
 232         pinctrl_ecspi1: ecspi1-grp {
 233                 fsl,pins = <
 234                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
 235                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
 236                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
 237                         MX6QDL_PAD_EIM_EB2__GPIO2_IO30          0x1b0b0
 238                         MX6QDL_PAD_KEY_ROW2__GPIO4_IO11         0x1b0b0
 239                 >;
 240         };
 241
 242         pinctrl_ecspi2: ecspi2-grp {
 243                 fsl,pins = <
 244                         MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO      0x100b1
 245                         MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI       0x100b1
 246                         MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK       0x100b1
 247                         MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29       0x1b0b0
 248                 >;
 249         };
 250
 251         pinctrl_enet_100M: enet-100M-grp {
 252                 fsl,pins = <
 253                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 254                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 255                         MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
 256                         MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
 257                         MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
 258                         MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
 259                         MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
 260                         MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
 261                         MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
 262                         MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 263                         MX6QDL_PAD_EIM_WAIT__GPIO5_IO00         0x000b0
 264                         MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x000b1
 265                         MX6QDL_PAD_GPIO_7__GPIO1_IO07           0x120b0
 266                 >;
 267         };
 268
 269         pinctrl_flexcan1: flexcan1-grp {
 270                 fsl,pins = <
 271                         MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b0
 272                         MX6QDL_PAD_GPIO_8__FLEXCAN1_RX          0x1b0b0
 273                 >;
 274         };
 275
 276         pinctrl_flexcan2: flexcan2-grp {
 277                 fsl,pins = <
 278                         MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX        0x1b0b0
 279                         MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX        0x1b0b0
 280                 >;
 281         };
 282
 283         pinctrl_i2c1: i2c1-grp {
 284                 fsl,pins = <
 285                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 286                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 287                 >;
 288         };
 289
 290         pinctrl_i2c2: i2c2-grp {
 291                 fsl,pins = <
 292                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 293                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 294                 >;
 295         };
 296
 297         pinctrl_i2c3: i2c3-grp {
 298                 fsl,pins = <
 299                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 300                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 301                 >;
 302         };
 303
 304         pinctrl_pmic_hw300: pmic-hw300-grp {
 305                 fsl,pins = <
 306                         MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x1B0B0
 307                 >;
 308         };
 309
 310         pinctrl_rtc_hw300: rtc-hw300-grp {
 311                 fsl,pins = <
 312                         MX6QDL_PAD_GPIO_17__GPIO7_IO12          0x120B0
 313                 >;
 314         };
 315
 316         pinctrl_tsc2004_hw300: tsc2004-hw300-grp {
 317                 fsl,pins = <
 318                         MX6QDL_PAD_KEY_COL4__GPIO4_IO14         0x120B0
 319                 >;
 320         };
 321
 322         pinctrl_uart1: uart1-grp {
 323                 fsl,pins = <
 324                         MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 325                         MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 326                         MX6QDL_PAD_EIM_D20__UART1_RTS_B         0x1b0b1
 327                         MX6QDL_PAD_EIM_D19__UART1_CTS_B         0x4001b0b1
 328                         MX6QDL_PAD_EIM_D23__GPIO3_IO23          0x4001b0b1
 329                         MX6QDL_PAD_EIM_D24__GPIO3_IO24          0x4001b0b1
 330                         MX6QDL_PAD_EIM_D25__GPIO3_IO25          0x4001b0b1
 331                         MX6QDL_PAD_EIM_EB3__GPIO2_IO31          0x4001b0b1
 332                 >;
 333         };
 334
 335         pinctrl_uart4: uart4-grp {
 336                 fsl,pins = <
 337                         MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA    0x1b0b1
 338                         MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA    0x1b0b1
 339                 >;
 340         };
 341
 342         pinctrl_uart5: uart5-grp {
 343                 fsl,pins = <
 344                         MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA    0x1b0b1
 345                         MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA    0x1b0b1
 346                         MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B      0x1b0b1
 347                         MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B      0x4001b0b1
 348                 >;
 349         };
 350
 351         pinctrl_usbh1: usbh1-grp {
 352                 fsl,pins = <
 353                         MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x120B0
 354                 >;
 355         };
 356
 357         pinctrl_usbotg: usbotg-grp {
 358                 fsl,pins = <
 359                         MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 360                 >;
 361         };
 362
 363         pinctrl_usdhc2: usdhc2-grp {
 364                 fsl,pins = <
 365                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 366                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 367                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 368                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 369                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 370                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 371                         MX6QDL_PAD_NANDF_CS3__GPIO6_IO16        0x120B0
 372                 >;
 373         };
 374
 375         pinctrl_usdhc3: usdhc3-grp {
 376                 fsl,pins = <
 377                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 378                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 379                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 380                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 381                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 382                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 383                         MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x120B0
 384                 >;
 385         };
 386
 387         pinctrl_usdhc4: usdhc4-grp {
 388                 fsl,pins = <
 389                         MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
 390                         MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
 391                         MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
 392                         MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
 393                         MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
 394                         MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
 395                         MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
 396                         MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
 397                         MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
 398                         MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
 399                 >;
 400         };
 401 };
 402
 403 &reg_arm {
 404         vin-supply = <&sw3_reg>;
 405 };
 406
 407 &reg_soc {
 408         vin-supply = <&sw1_reg>;
 409 };
 410
 411 &uart1 {
 412         pinctrl-names = "default";
 413         pinctrl-0 = <&pinctrl_uart1>;
 414         uart-has-rtscts;
 415         dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
 416         dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 417         dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
 418         rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
 419         status = "okay";
 420 };
 421
 422 &uart4 {
 423         pinctrl-names = "default";
 424         pinctrl-0 = <&pinctrl_uart4>;
 425         status = "okay";
 426 };
 427
 428 &uart5 {
 429         pinctrl-names = "default";
 430         pinctrl-0 = <&pinctrl_uart5>;
 431         uart-has-rtscts;
 432         status = "okay";
 433 };
 434
 435 &usbh1 {
 436         pinctrl-names = "default";
 437         pinctrl-0 = <&pinctrl_usbh1>;
 438         vbus-supply = <&reg_usb_h1_vbus>;
 439         dr_mode = "host";
 440         status = "okay";
 441 };
 442
 443 &usbotg {
 444         vbus-supply = <&reg_usb_otg_vbus>;
 445         pinctrl-names = "default";
 446         pinctrl-0 = <&pinctrl_usbotg>;
 447         disable-over-current;
 448         dr_mode = "otg";
 449         status = "okay";
 450 };
 451
 452 &usdhc2 {
 453         pinctrl-names = "default";
 454         pinctrl-0 = <&pinctrl_usdhc2>;
 455         cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
 456         keep-power-in-suspend;
 457         status = "okay";
 458 };
 459
 460 &usdhc3 {
 461         pinctrl-names = "default";
 462         pinctrl-0 = <&pinctrl_usdhc3>;
 463         cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
 464         fsl,wp-controller;
 465         keep-power-in-suspend;
 466         status = "disabled";
 467 };
 468
 469 &usdhc4 {
 470         pinctrl-names = "default";
 471         pinctrl-0 = <&pinctrl_usdhc4>;
 472         non-removable;
 473         bus-width = <8>;
 474         no-1-8-v;
 475         keep-power-in-suspend;
 476         status = "okay";
 477 };