arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

   1 /*
   2  * Copyright 2013 Data Modul AG
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /dts-v1/;
  13
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include "imx6q.dtsi"
  16
  17 / {
  18         model = "Data Modul eDM-QMX6 Board";
  19         compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
  20
  21         chosen {
  22                 stdout-path = &uart2;
  23         };
  24
  25         aliases {
  26                 gpio7 = &stmpe_gpio1;
  27                 gpio8 = &stmpe_gpio2;
  28                 stmpe-i2c0 = &stmpe1;
  29                 stmpe-i2c1 = &stmpe2;
  30         };
  31
  32         memory {
  33                 reg = <0x10000000 0x80000000>;
  34         };
  35
  36         regulators {
  37                 compatible = "simple-bus";
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40
  41                 reg_3p3v: regulator@0 {
  42                         compatible = "regulator-fixed";
  43                         reg = <0>;
  44                         regulator-name = "3P3V";
  45                         regulator-min-microvolt = <3300000>;
  46                         regulator-max-microvolt = <3300000>;
  47                         regulator-always-on;
  48                 };
  49
  50                 reg_usb_otg_switch: regulator@1 {
  51                         compatible = "regulator-fixed";
  52                         reg = <1>;
  53                         regulator-name = "usb_otg_switch";
  54                         regulator-min-microvolt = <5000000>;
  55                         regulator-max-microvolt = <5000000>;
  56                         gpio = <&gpio7 12 0>;
  57                         regulator-boot-on;
  58                         regulator-always-on;
  59                 };
  60
  61                 reg_usb_host1: regulator@2 {
  62                         compatible = "regulator-fixed";
  63                         reg = <2>;
  64                         regulator-name = "usb_host1_en";
  65                         regulator-min-microvolt = <3300000>;
  66                         regulator-max-microvolt = <3300000>;
  67                         gpio = <&gpio3 31 0>;
  68                         enable-active-high;
  69                 };
  70         };
  71
  72         gpio-leds {
  73                 compatible = "gpio-leds";
  74
  75                 led-blue {
  76                         label = "blue";
  77                         gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
  78                         linux,default-trigger = "heartbeat";
  79                 };
  80
  81                 led-green {
  82                         label = "green";
  83                         gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
  84                 };
  85
  86                 led-pink {
  87                         label = "pink";
  88                         gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
  89                 };
  90
  91                 led-red {
  92                         label = "red";
  93                         gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
  94                 };
  95         };
  96 };
  97
  98 &can1 {
  99         pinctrl-names = "default";
 100         pinctrl-0 = <&pinctrl_can1>;
 101         status = "okay";
 102 };
 103
 104 &ecspi5 {
 105         pinctrl-names = "default";
 106         pinctrl-0 = <&pinctrl_ecspi5>;
 107         fsl,spi-num-chipselects = <1>;
 108         cs-gpios = <&gpio1 12 0>;
 109         status = "okay";
 110
 111         flash: m25p80@0 {
 112                 compatible = "m25p80", "jedec,spi-nor";
 113                 spi-max-frequency = <40000000>;
 114                 reg = <0>;
 115         };
 116 };
 117
 118 &fec {
 119         pinctrl-names = "default";
 120         pinctrl-0 = <&pinctrl_enet>;
 121         phy-mode = "rgmii";
 122         phy-reset-gpios = <&gpio1 25 0>;
 123         phy-supply = <&vgen2_1v2_eth>;
 124         status = "okay";
 125 };
 126
 127 &i2c1 {
 128         clock-frequency = <100000>;
 129         pinctrl-names = "default";
 130         pinctrl-0 = <&pinctrl_i2c1>;
 131         status = "okay";
 132 };
 133
 134 &i2c2 {
 135         clock-frequency = <100000>;
 136         pinctrl-names = "default";
 137         pinctrl-0 = <&pinctrl_i2c2
 138                      &pinctrl_stmpe1
 139                      &pinctrl_stmpe2
 140                      &pinctrl_pfuze>;
 141         status = "okay";
 142
 143         pmic: pfuze100@08 {
 144                 compatible = "fsl,pfuze100";
 145                 reg = <0x08>;
 146                 interrupt-parent = <&gpio3>;
 147                 interrupts = <20 8>;
 148
 149                 regulators {
 150                         sw1a_reg: sw1ab {
 151                                 regulator-min-microvolt = <300000>;
 152                                 regulator-max-microvolt = <1875000>;
 153                                 regulator-boot-on;
 154                                 regulator-always-on;
 155                         };
 156
 157                         sw1c_reg: sw1c {
 158                                 regulator-min-microvolt = <300000>;
 159                                 regulator-max-microvolt = <1875000>;
 160                                 regulator-boot-on;
 161                                 regulator-always-on;
 162                         };
 163
 164                         sw2_reg: sw2 {
 165                                 regulator-min-microvolt = <800000>;
 166                                 regulator-max-microvolt = <3300000>;
 167                                 regulator-boot-on;
 168                                 regulator-always-on;
 169                         };
 170
 171                         sw3a_reg: sw3a {
 172                                 regulator-min-microvolt = <400000>;
 173                                 regulator-max-microvolt = <1975000>;
 174                                 regulator-boot-on;
 175                                 regulator-always-on;
 176                         };
 177
 178                         sw3b_reg: sw3b {
 179                                 regulator-min-microvolt = <400000>;
 180                                 regulator-max-microvolt = <1975000>;
 181                                 regulator-boot-on;
 182                                 regulator-always-on;
 183                         };
 184
 185                         sw4_reg: sw4 {
 186                                 regulator-min-microvolt = <400000>;
 187                                 regulator-max-microvolt = <1975000>;
 188                                 regulator-always-on;
 189                         };
 190
 191                         swbst_reg: swbst {
 192                                 regulator-min-microvolt = <5000000>;
 193                                 regulator-max-microvolt = <5150000>;
 194                                 regulator-always-on;
 195                         };
 196
 197                         snvs_reg: vsnvs {
 198                                 regulator-min-microvolt = <1000000>;
 199                                 regulator-max-microvolt = <3000000>;
 200                                 regulator-boot-on;
 201                                 regulator-always-on;
 202                         };
 203
 204                         vref_reg: vrefddr {
 205                                 regulator-boot-on;
 206                                 regulator-always-on;
 207                         };
 208
 209                         vgen1_reg: vgen1 {
 210                                 regulator-min-microvolt = <800000>;
 211                                 regulator-max-microvolt = <1550000>;
 212                         };
 213
 214                         vgen2_1v2_eth: vgen2 {
 215                                 regulator-min-microvolt = <800000>;
 216                                 regulator-max-microvolt = <1550000>;
 217                         };
 218
 219                         vdd_high_in: vgen3 {
 220                                 regulator-min-microvolt = <1800000>;
 221                                 regulator-max-microvolt = <3300000>;
 222                                 regulator-boot-on;
 223                                 regulator-always-on;
 224                         };
 225
 226                         vgen4_reg: vgen4 {
 227                                 regulator-min-microvolt = <1800000>;
 228                                 regulator-max-microvolt = <3300000>;
 229                                 regulator-always-on;
 230                         };
 231
 232                         vgen5_reg: vgen5 {
 233                                 regulator-min-microvolt = <1800000>;
 234                                 regulator-max-microvolt = <3300000>;
 235                                 regulator-always-on;
 236                         };
 237
 238                         vgen6_reg: vgen6 {
 239                                 regulator-min-microvolt = <1800000>;
 240                                 regulator-max-microvolt = <3300000>;
 241                                 regulator-always-on;
 242                         };
 243                 };
 244         };
 245
 246         stmpe1: stmpe1601@40 {
 247                 compatible = "st,stmpe1601";
 248                 reg = <0x40>;
 249                 interrupts = <30 0>;
 250                 interrupt-parent = <&gpio3>;
 251                 vcc-supply = <&sw2_reg>;
 252                 vio-supply = <&sw2_reg>;
 253
 254                 stmpe_gpio1: stmpe_gpio {
 255                         #gpio-cells = <2>;
 256                         compatible = "st,stmpe-gpio";
 257                 };
 258         };
 259
 260         stmpe2: stmpe1601@44 {
 261                 compatible = "st,stmpe1601";
 262                 reg = <0x44>;
 263                 interrupts = <2 0>;
 264                 interrupt-parent = <&gpio5>;
 265                 vcc-supply = <&sw2_reg>;
 266                 vio-supply = <&sw2_reg>;
 267
 268                 stmpe_gpio2: stmpe_gpio {
 269                         #gpio-cells = <2>;
 270                         compatible = "st,stmpe-gpio";
 271                 };
 272         };
 273
 274         temp1: ad7414@4c {
 275                 compatible = "ad,ad7414";
 276                 reg = <0x4c>;
 277         };
 278
 279         temp2: ad7414@4d {
 280                 compatible = "ad,ad7414";
 281                 reg = <0x4d>;
 282         };
 283
 284         rtc: m41t62@68 {
 285                 compatible = "stm,m41t62";
 286                 reg = <0x68>;
 287         };
 288 };
 289
 290 &i2c3 {
 291         clock-frequency = <100000>;
 292         pinctrl-names = "default";
 293         pinctrl-0 = <&pinctrl_i2c3>;
 294         status = "okay";
 295 };
 296
 297 &iomuxc {
 298         pinctrl-names = "default";
 299         pinctrl-0 = <&pinctrl_hog>;
 300
 301         imx6q-dmo-edmqmx6 {
 302                 pinctrl_hog: hoggrp {
 303                         fsl,pins = <
 304                                 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
 305                                 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
 306                         >;
 307                 };
 308
 309                 pinctrl_can1: can1grp {
 310                         fsl,pins = <
 311                                 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b0
 312                                 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX          0x1b0b0
 313                         >;
 314                 };
 315
 316                 pinctrl_ecspi5: ecspi5rp-1 {
 317                         fsl,pins = <
 318                                 MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO        0x80000000
 319                                 MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI         0x80000000
 320                                 MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK         0x80000000
 321                                 MX6QDL_PAD_SD2_DAT3__GPIO1_IO12         0x80000000
 322                         >;
 323                 };
 324
 325                 pinctrl_enet: enetgrp {
 326                         fsl,pins = <
 327                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b0b0
 328                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b0b0
 329                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b0b0
 330                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b0b0
 331                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b0b0
 332                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
 333                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b0b0
 334                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b0b0
 335                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b0b0
 336                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b0b0
 337                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b0b0
 338                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b0b0
 339                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 340                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 341                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 342                                 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25      0x1b0b0
 343                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 344                         >;
 345                 };
 346
 347                 pinctrl_i2c1: i2c1grp {
 348                         fsl,pins = <
 349                                 MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 350                                 MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 351                         >;
 352                 };
 353
 354                 pinctrl_i2c2: i2c2grp {
 355                         fsl,pins = <
 356                                 MX6QDL_PAD_EIM_EB2__I2C2_SCL            0x4001b8b1
 357                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 358                         >;
 359                 };
 360
 361                 pinctrl_i2c3: i2c3grp {
 362                         fsl,pins = <
 363                                 MX6QDL_PAD_EIM_D17__I2C3_SCL            0x4001b8b1
 364                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 365                         >;
 366                 };
 367
 368                 pinctrl_pcie: pciegrp {
 369                         fsl,pins = <
 370                                 MX6QDL_PAD_KEY_COL1__GPIO4_IO08         0x100b1
 371                         >;
 372                 };
 373
 374                 pinctrl_pfuze: pfuze100grp1 {
 375                         fsl,pins = <
 376                                 MX6QDL_PAD_EIM_D20__GPIO3_IO20          0x80000000
 377                         >;
 378                 };
 379
 380                 pinctrl_stmpe1: stmpe1grp {
 381                         fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
 382                 };
 383
 384                 pinctrl_stmpe2: stmpe2grp {
 385                         fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
 386                 };
 387
 388                 pinctrl_uart1: uart1grp {
 389                         fsl,pins = <
 390                                 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 391                                 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 392                         >;
 393                 };
 394
 395                 pinctrl_uart2: uart2grp {
 396                         fsl,pins = <
 397                                 MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
 398                                 MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
 399                         >;
 400                 };
 401
 402                 pinctrl_usbotg: usbotggrp {
 403                         fsl,pins = <
 404                                 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x17059
 405                         >;
 406                 };
 407
 408                 pinctrl_usdhc3: usdhc3grp {
 409                         fsl,pins = <
 410                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 411                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 412                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 413                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 414                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 415                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 416                         >;
 417                 };
 418
 419                 pinctrl_usdhc4: usdhc4grp {
 420                         fsl,pins = <
 421                                 MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
 422                                 MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
 423                                 MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
 424                                 MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
 425                                 MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
 426                                 MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
 427                                 MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
 428                                 MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
 429                                 MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
 430                                 MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
 431                         >;
 432                 };
 433         };
 434 };
 435
 436 &pcie {
 437         pinctrl-names = "default";
 438         pinctrl-0 = <&pinctrl_pcie>;
 439         reset-gpio = <&gpio4 8 0>;
 440         status = "okay";
 441 };
 442
 443 &sata {
 444         status = "okay";
 445 };
 446
 447 &uart1 {
 448         pinctrl-names = "default";
 449         pinctrl-0 = <&pinctrl_uart1>;
 450         status = "okay";
 451 };
 452
 453 &uart2 {
 454         pinctrl-names = "default";
 455         pinctrl-0 = <&pinctrl_uart2>;
 456         status = "okay";
 457 };
 458
 459 &usbh1 {
 460         vbus-supply = <&reg_usb_host1>;
 461         disable-over-current;
 462         dr_mode = "host";
 463         status = "okay";
 464 };
 465
 466 &usbotg {
 467         pinctrl-names = "default";
 468         pinctrl-0 = <&pinctrl_usbotg>;
 469         disable-over-current;
 470         status = "okay";
 471 };
 472
 473 &usdhc3 {
 474         pinctrl-names = "default";
 475         pinctrl-0 = <&pinctrl_usdhc3>;
 476         vmmc-supply = <&reg_3p3v>;
 477         status = "okay";
 478 };
 479
 480 &usdhc4 {
 481         pinctrl-names = "default";
 482         pinctrl-0 = <&pinctrl_usdhc4>;
 483         vmmc-supply = <&reg_3p3v>;
 484         non-removable;
 485         bus-width = <8>;
 486         status = "okay";
 487 };