arch/arm/boot/dts/imx6qdl-gw52xx.dtsi

   1 /*
   2  * Copyright 2013 Gateworks Corporation
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13
  14 / {
  15         /* these are used by bootloader for disabling nodes */
  16         aliases {
  17                 led0 = &led0;
  18                 led1 = &led1;
  19                 led2 = &led2;
  20                 nand = &gpmi;
  21                 ssi0 = &ssi1;
  22                 usb0 = &usbh1;
  23                 usb1 = &usbotg;
  24         };
  25
  26         chosen {
  27                 bootargs = "console=ttymxc1,115200";
  28         };
  29
  30         backlight {
  31                 compatible = "pwm-backlight";
  32                 pwms = <&pwm4 0 5000000>;
  33                 brightness-levels = <0 4 8 16 32 64 128 255>;
  34                 default-brightness-level = <7>;
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39                 pinctrl-names = "default";
  40                 pinctrl-0 = <&pinctrl_gpio_leds>;
  41
  42                 led0: user1 {
  43                         label = "user1";
  44                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
  45                         default-state = "on";
  46                         linux,default-trigger = "heartbeat";
  47                 };
  48
  49                 led1: user2 {
  50                         label = "user2";
  51                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
  52                         default-state = "off";
  53                 };
  54
  55                 led2: user3 {
  56                         label = "user3";
  57                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
  58                         default-state = "off";
  59                 };
  60         };
  61
  62         memory@10000000 {
  63                 reg = <0x10000000 0x20000000>;
  64         };
  65
  66         pps {
  67                 compatible = "pps-gpio";
  68                 pinctrl-names = "default";
  69                 pinctrl-0 = <&pinctrl_pps>;
  70                 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
  71                 status = "okay";
  72         };
  73
  74         reg_1p0v: regulator-1p0v {
  75                 compatible = "regulator-fixed";
  76                 regulator-name = "1P0V";
  77                 regulator-min-microvolt = <1000000>;
  78                 regulator-max-microvolt = <1000000>;
  79                 regulator-always-on;
  80         };
  81
  82         reg_3p3v: regulator-3p3v {
  83                 compatible = "regulator-fixed";
  84                 regulator-name = "3P3V";
  85                 regulator-min-microvolt = <3300000>;
  86                 regulator-max-microvolt = <3300000>;
  87                 regulator-always-on;
  88         };
  89
  90         reg_5p0v: regulator-5p0v {
  91                 compatible = "regulator-fixed";
  92                 regulator-name = "5P0V";
  93                 regulator-min-microvolt = <5000000>;
  94                 regulator-max-microvolt = <5000000>;
  95                 regulator-always-on;
  96         };
  97
  98         reg_usb_otg_vbus: regulator-usb-otg-vbus {
  99                 compatible = "regulator-fixed";
 100                 regulator-name = "usb_otg_vbus";
 101                 regulator-min-microvolt = <5000000>;
 102                 regulator-max-microvolt = <5000000>;
 103                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 104                 enable-active-high;
 105         };
 106
 107         sound {
 108                 compatible = "fsl,imx6q-ventana-sgtl5000",
 109                              "fsl,imx-audio-sgtl5000";
 110                 model = "sgtl5000-audio";
 111                 ssi-controller = <&ssi1>;
 112                 audio-codec = <&codec>;
 113                 audio-routing =
 114                         "MIC_IN", "Mic Jack",
 115                         "Mic Jack", "Mic Bias",
 116                         "Headphone Jack", "HP_OUT";
 117                 mux-int-port = <1>;
 118                 mux-ext-port = <4>;
 119         };
 120 };
 121
 122 &audmux {
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&pinctrl_audmux>;
 125         status = "okay";
 126 };
 127
 128 &can1 {
 129         pinctrl-names = "default";
 130         pinctrl-0 = <&pinctrl_flexcan1>;
 131         status = "okay";
 132 };
 133
 134 &clks {
 135         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 136                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 137         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 138                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 139 };
 140
 141 &ecspi3 {
 142         cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
 143         pinctrl-names = "default";
 144         pinctrl-0 = <&pinctrl_ecspi3>;
 145         status = "okay";
 146 };
 147
 148 &fec {
 149         pinctrl-names = "default";
 150         pinctrl-0 = <&pinctrl_enet>;
 151         phy-mode = "rgmii-id";
 152         phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 153         status = "okay";
 154 };
 155
 156 &gpmi {
 157         pinctrl-names = "default";
 158         pinctrl-0 = <&pinctrl_gpmi_nand>;
 159         status = "okay";
 160 };
 161
 162 &hdmi {
 163         ddc-i2c-bus = <&i2c3>;
 164         status = "okay";
 165 };
 166
 167 &i2c1 {
 168         clock-frequency = <100000>;
 169         pinctrl-names = "default";
 170         pinctrl-0 = <&pinctrl_i2c1>;
 171         status = "okay";
 172
 173         eeprom1: eeprom@50 {
 174                 compatible = "atmel,24c02";
 175                 reg = <0x50>;
 176                 pagesize = <16>;
 177         };
 178
 179         eeprom2: eeprom@51 {
 180                 compatible = "atmel,24c02";
 181                 reg = <0x51>;
 182                 pagesize = <16>;
 183         };
 184
 185         eeprom3: eeprom@52 {
 186                 compatible = "atmel,24c02";
 187                 reg = <0x52>;
 188                 pagesize = <16>;
 189         };
 190
 191         eeprom4: eeprom@53 {
 192                 compatible = "atmel,24c02";
 193                 reg = <0x53>;
 194                 pagesize = <16>;
 195         };
 196
 197         gpio: pca9555@23 {
 198                 compatible = "nxp,pca9555";
 199                 reg = <0x23>;
 200                 gpio-controller;
 201                 #gpio-cells = <2>;
 202         };
 203
 204         rtc: ds1672@68 {
 205                 compatible = "dallas,ds1672";
 206                 reg = <0x68>;
 207         };
 208 };
 209
 210 &i2c2 {
 211         clock-frequency = <100000>;
 212         pinctrl-names = "default";
 213         pinctrl-0 = <&pinctrl_i2c2>;
 214         status = "okay";
 215
 216         ltc3676: pmic@3c {
 217                 compatible = "lltc,ltc3676";
 218                 reg = <0x3c>;
 219                 pinctrl-names = "default";
 220                 pinctrl-0 = <&pinctrl_pmic>;
 221                 interrupt-parent = <&gpio1>;
 222                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 223
 224                 regulators {
 225                         /* VDD_SOC (1+R1/R2 = 1.635) */
 226                         reg_vdd_soc: sw1 {
 227                                 regulator-name = "vddsoc";
 228                                 regulator-min-microvolt = <674400>;
 229                                 regulator-max-microvolt = <1308000>;
 230                                 lltc,fb-voltage-divider = <127000 200000>;
 231                                 regulator-ramp-delay = <7000>;
 232                                 regulator-boot-on;
 233                                 regulator-always-on;
 234                         };
 235
 236                         /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
 237                         reg_1p8v: sw2 {
 238                                 regulator-name = "vdd1p8";
 239                                 regulator-min-microvolt = <1033310>;
 240                                 regulator-max-microvolt = <2004000>;
 241                                 lltc,fb-voltage-divider = <301000 200000>;
 242                                 regulator-ramp-delay = <7000>;
 243                                 regulator-boot-on;
 244                                 regulator-always-on;
 245                         };
 246
 247                         /* VDD_ARM (1+R1/R2 = 1.635) */
 248                         reg_vdd_arm: sw3 {
 249                                 regulator-name = "vddarm";
 250                                 regulator-min-microvolt = <674400>;
 251                                 regulator-max-microvolt = <1308000>;
 252                                 lltc,fb-voltage-divider = <127000 200000>;
 253                                 regulator-ramp-delay = <7000>;
 254                                 regulator-boot-on;
 255                                 regulator-always-on;
 256                         };
 257
 258                         /* VDD_DDR (1+R1/R2 = 2.105) */
 259                         reg_vdd_ddr: sw4 {
 260                                 regulator-name = "vddddr";
 261                                 regulator-min-microvolt = <868310>;
 262                                 regulator-max-microvolt = <1684000>;
 263                                 lltc,fb-voltage-divider = <221000 200000>;
 264                                 regulator-ramp-delay = <7000>;
 265                                 regulator-boot-on;
 266                                 regulator-always-on;
 267                         };
 268
 269                         /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
 270                         reg_2p5v: ldo2 {
 271                                 regulator-name = "vdd2p5";
 272                                 regulator-min-microvolt = <2490375>;
 273                                 regulator-max-microvolt = <2490375>;
 274                                 lltc,fb-voltage-divider = <487000 200000>;
 275                                 regulator-boot-on;
 276                                 regulator-always-on;
 277                         };
 278
 279                         /* VDD_AUD_1P8: Audio codec */
 280                         reg_aud_1p8v: ldo3 {
 281                                 regulator-name = "vdd1p8";
 282                                 regulator-min-microvolt = <1800000>;
 283                                 regulator-max-microvolt = <1800000>;
 284                                 regulator-boot-on;
 285                         };
 286
 287                         /* VDD_HIGH (1+R1/R2 = 4.17) */
 288                         reg_3p0v: ldo4 {
 289                                 regulator-name = "vdd3p0";
 290                                 regulator-min-microvolt = <3023250>;
 291                                 regulator-max-microvolt = <3023250>;
 292                                 lltc,fb-voltage-divider = <634000 200000>;
 293                                 regulator-boot-on;
 294                                 regulator-always-on;
 295                         };
 296                 };
 297         };
 298 };
 299
 300 &i2c3 {
 301         clock-frequency = <100000>;
 302         pinctrl-names = "default";
 303         pinctrl-0 = <&pinctrl_i2c3>;
 304         status = "okay";
 305
 306         codec: sgtl5000@a {
 307                 compatible = "fsl,sgtl5000";
 308                 reg = <0x0a>;
 309                 clocks = <&clks IMX6QDL_CLK_CKO>;
 310                 VDDA-supply = <&reg_1p8v>;
 311                 VDDIO-supply = <&reg_3p3v>;
 312         };
 313
 314         touchscreen: egalax_ts@4 {
 315                 compatible = "eeti,egalax_ts";
 316                 reg = <0x04>;
 317                 interrupt-parent = <&gpio7>;
 318                 interrupts = <12 2>;
 319                 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 320         };
 321 };
 322
 323 &ldb {
 324         status = "okay";
 325
 326         lvds-channel@0 {
 327                 fsl,data-mapping = "spwg";
 328                 fsl,data-width = <18>;
 329                 status = "okay";
 330
 331                 display-timings {
 332                         native-mode = <&timing0>;
 333                         timing0: hsd100pxn1 {
 334                                 clock-frequency = <65000000>;
 335                                 hactive = <1024>;
 336                                 vactive = <768>;
 337                                 hback-porch = <220>;
 338                                 hfront-porch = <40>;
 339                                 vback-porch = <21>;
 340                                 vfront-porch = <7>;
 341                                 hsync-len = <60>;
 342                                 vsync-len = <10>;
 343                         };
 344                 };
 345         };
 346 };
 347
 348 &pcie {
 349         pinctrl-names = "default";
 350         pinctrl-0 = <&pinctrl_pcie>;
 351         reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 352         status = "okay";
 353 };
 354
 355 &pwm2 {
 356         pinctrl-names = "default";
 357         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
 358         status = "disabled";
 359 };
 360
 361 &pwm3 {
 362         pinctrl-names = "default";
 363         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
 364         status = "disabled";
 365 };
 366
 367 &pwm4 {
 368         pinctrl-names = "default";
 369         pinctrl-0 = <&pinctrl_pwm4>;
 370         status = "okay";
 371 };
 372
 373 &ssi1 {
 374         status = "okay";
 375 };
 376
 377 &uart1 {
 378         pinctrl-names = "default";
 379         pinctrl-0 = <&pinctrl_uart1>;
 380         rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 381         status = "okay";
 382 };
 383
 384 &uart2 {
 385         pinctrl-names = "default";
 386         pinctrl-0 = <&pinctrl_uart2>;
 387         status = "okay";
 388 };
 389
 390 &uart5 {
 391         pinctrl-names = "default";
 392         pinctrl-0 = <&pinctrl_uart5>;
 393         status = "okay";
 394 };
 395
 396 &usbotg {
 397         vbus-supply = <&reg_usb_otg_vbus>;
 398         pinctrl-names = "default";
 399         pinctrl-0 = <&pinctrl_usbotg>;
 400         disable-over-current;
 401         status = "okay";
 402 };
 403
 404 &usbh1 {
 405         status = "okay";
 406 };
 407
 408 &usdhc3 {
 409         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 410         pinctrl-0 = <&pinctrl_usdhc3>;
 411         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 412         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 413         cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 414         vmmc-supply = <&reg_3p3v>;
 415         no-1-8-v; /* firmware will remove if board revision supports */
 416         status = "okay";
 417 };
 418
 419 &wdog1 {
 420         pinctrl-names = "default";
 421         pinctrl-0 = <&pinctrl_wdog>;
 422         fsl,ext-reset-output;
 423 };
 424
 425 &iomuxc {
 426         pinctrl_audmux: audmuxgrp {
 427                 fsl,pins = <
 428                         MX6QDL_PAD_SD2_DAT0__AUD4_RXD           0x130b0
 429                         MX6QDL_PAD_SD2_DAT3__AUD4_TXC           0x130b0
 430                         MX6QDL_PAD_SD2_DAT2__AUD4_TXD           0x110b0
 431                         MX6QDL_PAD_SD2_DAT1__AUD4_TXFS          0x130b0
 432                         MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0 /* AUD4_MCK */
 433                 >;
 434         };
 435
 436         pinctrl_ecspi3: escpi3grp {
 437                 fsl,pins = <
 438                         MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
 439                         MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
 440                         MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
 441                         MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24       0x100b1
 442                 >;
 443         };
 444
 445         pinctrl_enet: enetgrp {
 446                 fsl,pins = <
 447                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 448                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 449                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 450                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 451                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 452                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 453                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 454                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 455                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 456                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 457                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 458                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 459                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 460                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 461                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 462                         MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 463                         MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x1b0b0 /* PHY Reset */
 464                 >;
 465         };
 466
 467         pinctrl_flexcan1: flexcan1grp {
 468                 fsl,pins = <
 469                         MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b1
 470                         MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b1
 471                         MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x4001b0b0 /* CAN_STBY */
 472                 >;
 473         };
 474
 475         pinctrl_gpio_leds: gpioledsgrp {
 476                 fsl,pins = <
 477                         MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
 478                         MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
 479                         MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
 480                 >;
 481         };
 482
 483         pinctrl_gpmi_nand: gpminandgrp {
 484                 fsl,pins = <
 485                         MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
 486                         MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
 487                         MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
 488                         MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
 489                         MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
 490                         MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
 491                         MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
 492                         MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
 493                         MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
 494                         MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
 495                         MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
 496                         MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
 497                         MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
 498                         MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
 499                         MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
 500                 >;
 501         };
 502
 503         pinctrl_i2c1: i2c1grp {
 504                 fsl,pins = <
 505                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 506                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 507                 >;
 508         };
 509
 510         pinctrl_i2c2: i2c2grp {
 511                 fsl,pins = <
 512                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 513                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 514                 >;
 515         };
 516
 517         pinctrl_i2c3: i2c3grp {
 518                 fsl,pins = <
 519                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 520                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 521                 >;
 522         };
 523
 524         pinctrl_pcie: pciegrp {
 525                 fsl,pins = <
 526                         MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0 /* PCIE_RST# */
 527                 >;
 528         };
 529
 530         pinctrl_pmic: pmicgrp {
 531                 fsl,pins = <
 532                         MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x0001b0b0 /* PMIC_IRQ# */
 533                 >;
 534         };
 535
 536         pinctrl_pps: ppsgrp {
 537                 fsl,pins = <
 538                         MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
 539                 >;
 540         };
 541
 542         pinctrl_pwm2: pwm2grp {
 543                 fsl,pins = <
 544                         MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
 545                 >;
 546         };
 547
 548         pinctrl_pwm3: pwm3grp {
 549                 fsl,pins = <
 550                         MX6QDL_PAD_SD1_DAT1__PWM3_OUT           0x1b0b1
 551                 >;
 552         };
 553
 554         pinctrl_pwm4: pwm4grp {
 555                 fsl,pins = <
 556                         MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
 557                 >;
 558         };
 559
 560         pinctrl_uart1: uart1grp {
 561                 fsl,pins = <
 562                         MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 563                         MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 564                         MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x4001b0b1 /* TEN */
 565                 >;
 566         };
 567
 568         pinctrl_uart2: uart2grp {
 569                 fsl,pins = <
 570                         MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 571                         MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 572                 >;
 573         };
 574
 575         pinctrl_uart5: uart5grp {
 576                 fsl,pins = <
 577                         MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 578                         MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 579                 >;
 580         };
 581
 582         pinctrl_usbotg: usbotggrp {
 583                 fsl,pins = <
 584                         MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 585                         MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0 /* OTG_PWR_EN */
 586                 >;
 587         };
 588
 589         pinctrl_usdhc3: usdhc3grp {
 590                 fsl,pins = <
 591                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 592                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 593                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 594                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 595                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 596                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 597                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x17059 /* CD */
 598                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x17059
 599                 >;
 600         };
 601
 602         pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
 603                 fsl,pins = <
 604                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170b9
 605                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x170b9
 606                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170b9
 607                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170b9
 608                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170b9
 609                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170b9
 610                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170b9 /* CD */
 611                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170b9
 612                 >;
 613         };
 614
 615         pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
 616                 fsl,pins = <
 617                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170f9
 618                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100f9
 619                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170f9
 620                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170f9
 621                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170f9
 622                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170f9
 623                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170f9 /* CD */
 624                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170f9
 625                 >;
 626         };
 627
 628         pinctrl_wdog: wdoggrp {
 629                 fsl,pins = <
 630                         MX6QDL_PAD_DISP0_DAT8__WDOG1_B          0x1b0b0
 631                 >;
 632         };
 633 };