arch/arm/boot/dts/kirkwood-6281.dtsi

   1 / {
   2         mbus {
   3                 pcie-controller {
   4                         compatible = "marvell,kirkwood-pcie";
   5                         status = "disabled";
   6                         device_type = "pci";
   7
   8                         #address-cells = <3>;
   9                         #size-cells = <2>;
  10
  11                         bus-range = <0x00 0xff>;
  12
  13                         ranges =
  14                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
  15                                 0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
  16                                 0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
  17
  18                         pcie@1,0 {
  19                                 device_type = "pci";
  20                                 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
  21                                 reg = <0x0800 0 0 0 0>;
  22                                 #address-cells = <3>;
  23                                 #size-cells = <2>;
  24                                 #interrupt-cells = <1>;
  25                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
  26                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
  27                                 interrupt-map-mask = <0 0 0 0>;
  28                                 interrupt-map = <0 0 0 0 &intc 9>;
  29                                 marvell,pcie-port = <0>;
  30                                 marvell,pcie-lane = <0>;
  31                                 clocks = <&gate_clk 2>;
  32                                 status = "disabled";
  33                         };
  34                 };
  35         };
  36
  37         ocp@f1000000 {
  38                 pinctrl: pinctrl@10000 {
  39                         compatible = "marvell,88f6281-pinctrl";
  40                         reg = <0x10000 0x20>;
  41
  42                         pmx_nand: pmx-nand {
  43                                 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
  44                                                "mpp4", "mpp5", "mpp18",
  45                                                "mpp19";
  46                                 marvell,function = "nand";
  47                         };
  48                         pmx_sata0: pmx-sata0 {
  49                                 marvell,pins = "mpp5", "mpp21", "mpp23";
  50                                 marvell,function = "sata0";
  51                         };
  52                         pmx_sata1: pmx-sata1 {
  53                                 marvell,pins = "mpp4", "mpp20", "mpp22";
  54                                 marvell,function = "sata1";
  55                         };
  56                         pmx_spi: pmx-spi {
  57                                 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
  58                                 marvell,function = "spi";
  59                         };
  60                         pmx_twsi0: pmx-twsi0 {
  61                                 marvell,pins = "mpp8", "mpp9";
  62                                 marvell,function = "twsi0";
  63                         };
  64                         pmx_uart0: pmx-uart0 {
  65                                 marvell,pins = "mpp10", "mpp11";
  66                                 marvell,function = "uart0";
  67                         };
  68                         pmx_uart1: pmx-uart1 {
  69                                 marvell,pins = "mpp13", "mpp14";
  70                                 marvell,function = "uart1";
  71                         };
  72                         pmx_sdio: pmx-sdio {
  73                                 marvell,pins = "mpp12", "mpp13", "mpp14",
  74                                                "mpp15", "mpp16", "mpp17";
  75                                 marvell,function = "sdio";
  76                         };
  77                 };
  78
  79                 rtc@10300 {
  80                         compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
  81                         reg = <0x10300 0x20>;
  82                         interrupts = <53>;
  83                         clocks = <&gate_clk 7>;
  84                 };
  85
  86                 sata@80000 {
  87                         compatible = "marvell,orion-sata";
  88                         reg = <0x80000 0x5000>;
  89                         interrupts = <21>;
  90                         clocks = <&gate_clk 14>, <&gate_clk 15>;
  91                         clock-names = "0", "1";
  92                         phys = <&sata_phy0>, <&sata_phy1>;
  93                         phy-names = "port0", "port1";
  94                         status = "disabled";
  95                 };
  96
  97                 mvsdio@90000 {
  98                         compatible = "marvell,orion-sdio";
  99                         reg = <0x90000 0x200>;
 100                         interrupts = <28>;
 101                         clocks = <&gate_clk 4>;
 102                         pinctrl-0 = <&pmx_sdio>;
 103                         pinctrl-names = "default";
 104                         bus-width = <4>;
 105                         cap-sdio-irq;
 106                         cap-sd-highspeed;
 107                         cap-mmc-highspeed;
 108                         status = "disabled";
 109                 };
 110         };
 111 };