arch/arm/boot/dts/kirkwood-6281.dtsi

   1 / {
   2         mbus@f1000000 {
   3                 pciec: pcie-controller@82000000 {
   4                         compatible = "marvell,kirkwood-pcie";
   5                         status = "disabled";
   6                         device_type = "pci";
   7
   8                         #address-cells = <3>;
   9                         #size-cells = <2>;
  10
  11                         bus-range = <0x00 0xff>;
  12
  13                         ranges =
  14                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
  15                                 0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
  16                                 0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
  17
  18                         pcie0: pcie@1,0 {
  19                                 device_type = "pci";
  20                                 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
  21                                 reg = <0x0800 0 0 0 0>;
  22                                 #address-cells = <3>;
  23                                 #size-cells = <2>;
  24                                 #interrupt-cells = <1>;
  25                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
  26                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
  27                                 interrupt-map-mask = <0 0 0 0>;
  28                                 interrupt-map = <0 0 0 0 &intc 9>;
  29                                 marvell,pcie-port = <0>;
  30                                 marvell,pcie-lane = <0>;
  31                                 clocks = <&gate_clk 2>;
  32                                 status = "disabled";
  33                         };
  34                 };
  35         };
  36
  37         ocp@f1000000 {
  38                 pinctrl: pin-controller@10000 {
  39                         compatible = "marvell,88f6281-pinctrl";
  40
  41                         pmx_sata0: pmx-sata0 {
  42                                 marvell,pins = "mpp5", "mpp21", "mpp23";
  43                                 marvell,function = "sata0";
  44                         };
  45                         pmx_sata1: pmx-sata1 {
  46                                 marvell,pins = "mpp4", "mpp20", "mpp22";
  47                                 marvell,function = "sata1";
  48                         };
  49                         pmx_sdio: pmx-sdio {
  50                                 marvell,pins = "mpp12", "mpp13", "mpp14",
  51                                                "mpp15", "mpp16", "mpp17";
  52                                 marvell,function = "sdio";
  53                         };
  54                 };
  55
  56                 rtc: rtc@10300 {
  57                         compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
  58                         reg = <0x10300 0x20>;
  59                         interrupts = <53>;
  60                         clocks = <&gate_clk 7>;
  61                 };
  62
  63                 sata: sata@80000 {
  64                         compatible = "marvell,orion-sata";
  65                         reg = <0x80000 0x5000>;
  66                         interrupts = <21>;
  67                         clocks = <&gate_clk 14>, <&gate_clk 15>;
  68                         clock-names = "0", "1";
  69                         phys = <&sata_phy0>, <&sata_phy1>;
  70                         phy-names = "port0", "port1";
  71                         status = "disabled";
  72                 };
  73
  74                 sdio: mvsdio@90000 {
  75                         compatible = "marvell,orion-sdio";
  76                         reg = <0x90000 0x200>;
  77                         interrupts = <28>;
  78                         clocks = <&gate_clk 4>;
  79                         pinctrl-0 = <&pmx_sdio>;
  80                         pinctrl-names = "default";
  81                         bus-width = <4>;
  82                         cap-sdio-irq;
  83                         cap-sd-highspeed;
  84                         cap-mmc-highspeed;
  85                         status = "disabled";
  86                 };
  87         };
  88 };