arch/arm/boot/dts/kirkwood-6282.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 / {
   3         mbus@f1000000 {
   4                 pciec: pcie@82000000 {
   5                         compatible = "marvell,kirkwood-pcie";
   6                         status = "disabled";
   7                         device_type = "pci";
   8
   9                         #address-cells = <3>;
  10                         #size-cells = <2>;
  11
  12                         bus-range = <0x00 0xff>;
  13
  14                         ranges =
  15                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
  16                                 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
  17                                 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
  18                                 0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
  19                                 0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
  20                                 0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
  21                                 0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
  22
  23                         pcie0: pcie@1,0 {
  24                                 device_type = "pci";
  25                                 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
  26                                 reg = <0x0800 0 0 0 0>;
  27                                 #address-cells = <3>;
  28                                 #size-cells = <2>;
  29                                 #interrupt-cells = <1>;
  30                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
  31                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
  32                                 bus-range = <0x00 0xff>;
  33                                 interrupt-map-mask = <0 0 0 0>;
  34                                 interrupt-map = <0 0 0 0 &intc 9>;
  35                                 marvell,pcie-port = <0>;
  36                                 marvell,pcie-lane = <0>;
  37                                 clocks = <&gate_clk 2>;
  38                                 status = "disabled";
  39                         };
  40
  41                         pcie1: pcie@2,0 {
  42                                 device_type = "pci";
  43                                 assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
  44                                 reg = <0x1000 0 0 0 0>;
  45                                 #address-cells = <3>;
  46                                 #size-cells = <2>;
  47                                 #interrupt-cells = <1>;
  48                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
  49                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
  50                                 bus-range = <0x00 0xff>;
  51                                 interrupt-map-mask = <0 0 0 0>;
  52                                 interrupt-map = <0 0 0 0 &intc 10>;
  53                                 marvell,pcie-port = <1>;
  54                                 marvell,pcie-lane = <0>;
  55                                 clocks = <&gate_clk 18>;
  56                                 status = "disabled";
  57                         };
  58                 };
  59         };
  60         ocp@f1000000 {
  61
  62                 pinctrl: pin-controller@10000 {
  63                         compatible = "marvell,88f6282-pinctrl";
  64
  65                         pmx_sata0: pmx-sata0 {
  66                                 marvell,pins = "mpp5", "mpp21", "mpp23";
  67                                 marvell,function = "sata0";
  68                         };
  69                         pmx_sata1: pmx-sata1 {
  70                                 marvell,pins = "mpp4", "mpp20", "mpp22";
  71                                 marvell,function = "sata1";
  72                         };
  73
  74                         /*
  75                          * Default I2C1 pinctrl setting on mpp36/mpp37,
  76                          * overwrite marvell,pins on board level if required.
  77                          */
  78                         pmx_twsi1: pmx-twsi1 {
  79                                 marvell,pins = "mpp36", "mpp37";
  80                                 marvell,function = "twsi1";
  81                         };
  82
  83                         pmx_sdio: pmx-sdio {
  84                                 marvell,pins = "mpp12", "mpp13", "mpp14",
  85                                                "mpp15", "mpp16", "mpp17";
  86                                 marvell,function = "sdio";
  87                         };
  88                 };
  89
  90                 thermal: thermal@10078 {
  91                         compatible = "marvell,kirkwood-thermal";
  92                         reg = <0x10078 0x4>;
  93                         status = "okay";
  94                 };
  95
  96                 rtc: rtc@10300 {
  97                         compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
  98                         reg = <0x10300 0x20>;
  99                         interrupts = <53>;
 100                         clocks = <&gate_clk 7>;
 101                 };
 102
 103                 i2c1: i2c@11100 {
 104                         compatible = "marvell,mv64xxx-i2c";
 105                         reg = <0x11100 0x20>;
 106                         #address-cells = <1>;
 107                         #size-cells = <0>;
 108                         interrupts = <32>;
 109                         clock-frequency = <100000>;
 110                         clocks = <&gate_clk 7>;
 111                         pinctrl-0 = <&pmx_twsi1>;
 112                         pinctrl-names = "default";
 113                         status = "disabled";
 114                 };
 115
 116                 sata: sata@80000 {
 117                         compatible = "marvell,orion-sata";
 118                         reg = <0x80000 0x5000>;
 119                         interrupts = <21>;
 120                         clocks = <&gate_clk 14>, <&gate_clk 15>;
 121                         clock-names = "0", "1";
 122                         phys = <&sata_phy0>, <&sata_phy1>;
 123                         phy-names = "port0", "port1";
 124                         status = "disabled";
 125                 };
 126
 127                 sdio: mvsdio@90000 {
 128                         compatible = "marvell,orion-sdio";
 129                         reg = <0x90000 0x200>;
 130                         interrupts = <28>;
 131                         clocks = <&gate_clk 4>;
 132                         pinctrl-0 = <&pmx_sdio>;
 133                         pinctrl-names = "default";
 134                         bus-width = <4>;
 135                         cap-sdio-irq;
 136                         cap-sd-highspeed;
 137                         cap-mmc-highspeed;
 138                         status = "disabled";
 139                 };
 140         };
 141 };